Skip to content
From Fire Safety Academy Wiki
(Redirected from Fire emergency plan)
Contents
  1. 1Hazards, responsibilities and the response sequence
  2. 2Training, coordination and continued applicability
  3. 3Perception and interpretation
  4. 4Decision processes and protective action
  5. 5Social influence and affiliation
  6. 6Pre-movement activities
  7. 7Modelling and evidence limits
  8. 8See also
  9. 9Notes
  10. 10References

An emergency action plan sets out the actions, responsibilities and communication arrangements for responding to an emergency. For fire safety, it connects the evacuation strategy with the people who must implement it. The Society of Fire Protection Engineers (SFPE) Handbook's account of recognition, decisions and movement explains why a route drawing alone cannot represent the complete response.[1][2]

The National Fire Protection Association (NFPA) Fire Protection Handbook describes reporting, escape routes, critical operations, accounting, rescue and medical duties within workplace planning. It also addresses training and coordination with emergency services. The appropriate content depends on the site's hazards, population and the response capabilities actually available.[3]

Fire safety management maintains the conditions on which the plan depends. Emergency management provides the wider organisational context for coordination and recovery. The plan should identify who makes and communicates decisions as conditions change, while exercises and review test whether those arrangements remain practicable.[4][5]

Hazards, responsibilities and the response sequence

Planning starts with the emergency conditions the site may encounter; the NFPA discussion of hazardous-material incidents links the plan with the materials, processes and response agencies involved. Fire may be one part of a wider incident. The plan should therefore describe the hazards relevant to the premises rather than assume that every alarm requires an identical set of tasks.[5]

Emergency action plan: hazards, responsibilities and the response sequence, showing the relationships described in the text.
Hazards, responsibilities and the response sequence in the assessment of Emergency action plan.

Reporting arrangements identify how an event is recognised and communicated; staff need to know how to raise the alarm and contact the responsible response organisation. The NFPA workplace account includes preferred reporting methods and named sources of further information. These functions connect the person discovering a problem with those responsible for directing the response.[6]

Escape arrangements identify routes and destinations for the intended occupants. The strategy may involve immediate departure, staged movement or relocation to a protected area. The International Fire Engineering Guidelines distinguish these approaches through their objectives and occupant conditions; the action plan should implement the selected strategy consistently with the building's protection.[7]

Some employees may have duties before leaving, such as shutting down critical operations. The NFPA handbook identifies these as specific planning matters; such duties should be assigned explicitly, with attention to the exposure and competence involved. They cannot be assumed from an employee's ordinary job title or from a general instruction to make the workplace safe.[6]

Accounting identifies who has reached the designated destination and what information remains uncertain; the plan needs a method appropriate to the workforce and other occupants. Communication of missing-person information is part of that process. It should connect with the response organisation rather than depend on uncontrolled individual searches.[8]

Rescue and medical duties require their own allocation. The NFPA handbook lists these separately from general evacuation responsibilities; this distinction helps prevent an ordinary evacuation assignment from being interpreted as an unrestricted rescue role. The plan should identify the trained personnel and the external support on which those functions depend.[6]

Training, coordination and continued applicability

An industrial fire brigade can provide a defined level of on-site response; the NFPA handbook distinguishes brigade arrangements by their intended services and operating conditions. The action plan should match those capabilities, including their limits. The existence of a brigade does not establish that it can undertake every type of structural or hazardous-material intervention.[9]

Emergency action plan: training, coordination and continued applicability, showing the relationships described in the text.
Training, coordination and continued applicability in the assessment of Emergency action plan.

External coordination should establish how information reaches responding agencies. Site hazards, access and the division of responsibilities can affect their actions; the NFPA hazardous-material planning discussion treats these as matters for advance preparation. Coordination during an incident is easier when the participating organisations understand the planned roles and communication paths.[5]

The Occupational Safety and Health Administration appears in the handbook's account of workplace emergency planning. That account reflects the regulatory setting discussed in the 2008 edition. It is evidence of the plan's historical framework and content, not a complete statement of current legal duties in every jurisdiction.[10]

A fire drill provides an opportunity to practise selected duties and observe their interaction; training should precede tasks that participants are expected to perform competently. The exercise can reveal unclear instructions, unavailable personnel or competing responsibilities. Evaluation should then connect those findings to specific changes in the plan or supporting arrangements.[11]

The document needs review when the population, process, layout or organisation changes; a route or responsible person named in an earlier version may no longer exist. The International Fire Engineering Guidelines place operating procedures within continuing fire-safety management. The plan remains useful only while its assumptions describe the occupied premises.[4]

International Fire Engineering Guidelines (IFEG) divides evacuation measures into physical provisions and emergency organisation. Routes, corridors, exits and signs need an organisation that maintains procedures, education, training and testing. The two groups must reflect the same fire-safety assumptions.[12]

Commissioning should examine both the constructed route and the procedures for using it. Differences between design and construction can require adjustments to the emergency plan. A documented plan that assumes an unavailable route would not provide the intended function.[12]

Regular checks should keep paths clear, doors operating and signage in good condition. Lighting and emergency-power functions also need appropriate testing; these checks preserve the physical chain on which the evacuation analysis depends;[12][13] staff positions and training need to be maintained as well. Procedures should be reviewed, exercises conducted and records kept; changes in staffing or occupancy can undermine assumptions about directions and assistance.[12]

Alterations should trigger comparison with the original escape design. New partitions, furniture, storage or changed room use can alter distance, capacity and wayfinding. A previously acceptable route may no longer serve the building in its altered form.[14][12]

Perception and interpretation

A fire cue can be an alarm, smoke odour, visible smoke, flame, heat, noise or information from another person. Each cue supplies different evidence about the event. The observer must notice it and decide whether it indicates an emergency.[15]

Bryan describes recognition as the identification of ambiguous cues as a fire incident. Recognition can be delayed when the signs are weak or consistent with a normal event. The observer's prior experience and expectation of a favourable outcome can influence this interpretation.[16]

Validation follows when a person seeks confirmation that the initial interpretation is correct. This may involve looking for additional cues or asking other people. The process can reduce uncertainty but also consumes time before evacuation begins.[16]

Warning systems provide different amounts of information. A bell announces a signal but not its cause or the required action. Directive voice messages can explain the incident and the response, although conflicting visual cues can undermine their credibility.[15]

Repeated unwanted alarms can reduce the credibility of a warning. Proulx describes occupants becoming less willing to investigate or respond when false alarms are frequent. The alarm system's operational history therefore becomes part of the behavioural context.[17]

Decision processes and protective action

After recognition and validation, a person defines the situation and evaluates possible responses. Bryan's process model includes commitment to an action and reassessment if it is incomplete or conditions change; behaviour is thus a sequence rather than one irreversible choice.[18] Bryan organises the response around six connected processes: recognition, validation, definition, evaluation, commitment and reassessment; this is a conceptual account of how decisions can change as a fire develops. It does not assign a universal duration to each process or establish that every person follows one fixed sequence.[16][18]

Possible actions are not limited to flight. Bryan describes decisions that can include obtaining an extinguisher, activating an alarm, seeking refuge or evacuating. The chosen response reflects the person's location, perceived threat and assessment of available options.[16]

A person can also change actions after receiving new information. Smoke along a route, a staff message or the behaviour of companions may trigger reassessment. Static calculations that assign one action at the start cannot capture those changes.[18]

Perceived time available is part of evaluation. Sime links this perception to information about fire location and development, as discussed by Bryan. The time a person believes remains for escape can therefore differ from a calculated tenability interval based on the actual fire.[19]

Social influence and affiliation

The presence of other people changes cue interpretation. Bryan describes experiments in which passive companions inhibited reporting of introduced smoke. These specific findings illustrate social influence, not a universal delay for every public occupancy.[20]

The experiment involved students completing a questionnaire while smoke entered the room. Bryan reports smoke reporting by 75% of subjects tested alone, compared with 10% when two passive participants were present. In groups of three uninformed subjects, someone reported the smoke in 38% of groups during the six-minute observation period.[21]

The outcome measured was reporting smoke, not successful evacuation from a real building fire. The group conditions also differed deliberately in whether other participants remained passive. These distinctions matter because the experiment demonstrates social influence on interpretation, without supplying an evacuation-time distribution for a public building.[21]

Noticing a cue and acting on it were separate observations. Bryan reports median smoke-noticing delays of 5 s for subjects alone and 20 s in the group conditions. The much longer observation period for reporting shows why noticing smoke cannot simply be equated with deciding to leave.[21]

People can mimic adaptive as well as nonadaptive responses. Observing others investigate, warn or evacuate can supply information about what is happening. Staff behaviour can consequently provide a strong cue when an alarm alone is ambiguous.[17][18]

Affiliative behaviour is the tendency to seek or remain with people who have emotional ties. Family members may gather before leaving, and groups may travel together; this can increase preparation time while also providing assistance and shared information;[22] group movement can be limited by a slower member. Proulx gives the example of a family moving with a child or older person; an individual walking-speed value may therefore be inappropriate for the group as a whole.[23]

Responsibility also affects response. Proulx contrasts occupants who expect to manage their own household alarm with visitors who wait for instructions from building staff. The distribution of expected responsibility should be considered when assigning warning and management roles.[17]

Pre-movement activities

Pre-movement time is the period before directed evacuation travel begins. It includes perception, interpretation and preparatory action, and it may involve movement within the current space. It should not be imagined as everyone waiting motionless for one fixed duration.[24]

Observed activities include dressing, collecting children or pets, securing work, gathering belongings and contacting staff. These tasks respond to personal circumstances and the information available. Their duration can vary between occupants in the same building.[25]

Proulx's residential drills showed different response times between buildings and warning conditions. Poor alarm audibility and the arrival of other cues affected when people left. The values belong to those case studies and should not be used as universal delays.[25]

The contrast between reported case means is substantial. In three Canadian office-building drills, Proulx recorded more than 1,000 individual start times and reported a mean of 50 s. In three residential buildings with good alarm audibility, the reported mean was 2 min 49 s.[26]

A separate winter residential drill had a mean start delay of 5 min 19 s. Occupants spent time putting on outdoor clothing before leaving. The office occupants also undertook preparatory actions, including finishing calls, saving computer work and gathering belongings, despite their training.[26]

These means describe different buildings and circumstances, rather than controlled estimates of one isolated cause. They also do not represent the last person to leave or an upper design percentile. Using a mean as though every occupant starts at that time would remove the variation described in the observations.[26][27]

New Zealand's C/VM2, second edition, 2025, assigns pre-travel times by occupant state, familiarity, alarm signal and location relative to the fire. These are regulatory design inputs for that method. They do not eliminate the need to establish the relevant population and cue conditions.[28]

Direct cues such as seeing or smelling smoke may be available near the fire, while remote occupants may rely on indirect information. C/VM2 limits when indirect cues can be assumed in its method. Social interaction and spatial arrangement therefore matter to timing analysis.[29]

The New Zealand method specifically distinguishes socially connected spaces from separate tenancies. Its 2025 commentary allows some indirect cues within a shared retail area or single-management office. It does not assume the same interaction between separate apartments, hotel rooms or office tenancies, even when occupants are on the same floor.[29]

Modelling and evidence limits

Evacuation models often simplify human behaviour. The 2005 International Fire Engineering Guidelines (IFEG) describe assumptions of simultaneous departure, uninterrupted movement and excellent knowledge of the shortest route. Those simplifications can help examine capacity but do not provide a complete behavioural prediction.[27]

Emergency action plan: modelling and evidence limits, showing the relationships described in the text.
Modelling and evidence limits in the assessment of Emergency action plan.

A model should be suited to the occupancy and layout. A simple approach may fail to identify local queues or group decisions in a complex building. Expensive software does not guarantee better input data or a more faithful account of human response.[30]

Case studies and drills provide evidence about particular populations and conditions. Warning credibility, staff action, notice and weather can influence the observations. Results should retain those circumstances instead of being transferred as universal occupant constants.[25]

Interview evidence also requires careful interpretation. Recalled timings can be uncertain, and people may have experienced only part of the event. Proulx presents such studies as valuable context rather than exact measurements applicable to every incident.[25]

See also

Notes

  1. ↑ Proulx (2002), pp. 3-348–3-351.
  2. ↑ Bryan (2002), pp. 3-318–3-319.
  3. ↑ Cote et al. (2008), §12.11, pp. 12-183, 12-190, 12-193.
  4. ↑ 4.0 4.1 Australian Building Codes Board et al. (2005), pp. 1.8-13–1.8-14.
  5. ↑ 5.0 5.1 5.2 Cote et al. (2008), §13.6, pp. 13-85–13-86, 13-98.
  6. ↑ 6.0 6.1 6.2 Cote et al. (2008), §12.11, p. 12-190.
  7. ↑ Australian Building Codes Board et al. (2005), pp. 2.8-1–2.8-4.
  8. ↑ Cote et al. (2008), §12.11, p. 12-190; §4.1, pp. 4-42–4-43.
  9. ↑ Cote et al. (2008), §12.11, p. 12-193.
  10. ↑ Cote et al. (2008), §12.11, pp. 12-183, 12-190.
  11. ↑ Cote et al. (2008), §4.1, pp. 4-42–4-44; §12.11, p. 12-190.
  12. ↑ 12.0 12.1 12.2 12.3 12.4 Australian Building Codes Board et al. (2005), pp. 1.8-13–1.8-14.
  13. ↑ Razza and Grill (2005), pp. 3–4.
  14. ↑ Ministry of Business, Innovation and Employment (2025), p. 32.
  15. ↑ 15.0 15.1 Bryan (2002), pp. 3-315–3-316.
  16. ↑ 16.0 16.1 16.2 16.3 Bryan (2002), pp. 3-318–3-319.
  17. ↑ 17.0 17.1 17.2 Proulx (2002), pp. 3-350–3-351.
  18. ↑ 18.0 18.1 18.2 18.3 Bryan (2002), p. 3-319.
  19. ↑ Sime (1986), as cited in Bryan (2002), p. 3-318.
  20. ↑ Bryan (2002), pp. 3-317–3-318.
  21. ↑ 21.0 21.1 21.2 Latané and Darley (1968), as cited in Bryan (2002), p. 3-317.
  22. ↑ Proulx (2002), pp. 3-344–3-345.
  23. ↑ Proulx (2002), pp. 3-346–3-347.
  24. ↑ Proulx (2002), pp. 3-348–3-351.
  25. ↑ 25.0 25.1 25.2 25.3 Proulx (2002), pp. 3-348–3-350.
  26. ↑ 26.0 26.1 26.2 Proulx (2002), pp. 3-348–3-349.
  27. ↑ 27.0 27.1 Australian Building Codes Board et al. (2005), pp. 2.8-3–2.8-4.
  28. ↑ Ministry of Business, Innovation and Employment (2025), pp. 29–31.
  29. ↑ 29.0 29.1 Ministry of Business, Innovation and Employment (2025), p. 31.
  30. ↑ Australian Building Codes Board et al. (2005), p. 2.8-4.

References

  • Australian Building Codes Board, National Research Council of Canada, International Code Council, & Department of Building and Housing New Zealand. (2005). International fire engineering guidelines. Australian Building Codes Board.
  • Bryan, J. L. (2002). Behavioral response to fire and smoke. In P. J. DiNenno (Ed.), SFPE handbook of fire protection engineering (3rd ed., pp. 3-315–3-341). National Fire Protection Association.
  • Cote, A. E., Grant, C. C., Hall, J. R., Jr., & Solomon, R. E. (Eds.). (2008). Fire protection handbook (20th ed.). National Fire Protection Association.
  • Ministry of Business, Innovation and Employment. (2025). C protection from fire: Verification method C/VM2 (2nd ed.).
  • Proulx, G. (2002). Movement of people: The evacuation timing. In P. J. DiNenno (Ed.), SFPE handbook of fire protection engineering (3rd ed., pp. 3-342–3-366). National Fire Protection Association.
  • Razza, J. C., & Grill, R. A. (2005). Comparison of the 1968 and current (2003) New York City building code provisions (NIST NCSTAR 1-1F). National Institute of Standards and Technology.