File:Fse-sprinkler-design-density-v1.svg

Fse-sprinkler-design-density-v1.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Illustrative conversion from assigned coverage area to required flow. Based on Fleming (2002), p. 4-75.

Original illustration for Sprinkler design density, level 3 Advanced.

Source basis: Fleming (2002), p. 4-75; article illustrative calculation.
Alt text: A twelve square metre coverage rectangle requires seventy-two litres per minute at the illustrative design density.
Accuracy notes: These are example inputs, not permitted spacing or a prescribed hazard density.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:42, 2 November 2026		900 × 600 (7 KB)	Emma (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Illustrative conversion from assigned coverage area to required flow. Based on Fleming (2002), p. 4-75.
Image title	A twelve square metre coverage rectangle requires seventy-two litres per minute at the illustrative design density. Source basis: Fleming (2002), p. 4-75; article illustrative calculation.
Width	900
Height	600