File:Fse-smoke-filling-v3.svg

Fse-smoke-filling-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)

Summary

Layer height follows from both stored mass and the thermal state of the gas. Based on Van Rossum (2027), §9.3, and Milke (2002), p. 4-298.

Original illustration for Smoke filling, level 3 Advanced.

Source basis: Van Rossum (2027), §9.3; Milke (2002), p. 4-298.
Alt text: Mass and energy balances determine gas density and volume before the smoke interface is calculated.
Accuracy notes: Heat loss must not appear as mass extraction; volume depends on temperature as well as mass.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:34, 2 November 2026		900 × 600 (8 KB)	Emma (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Layer height follows from both stored mass and the thermal state of the gas. Based on Van Rossum (2027), §9.3, and Milke (2002), p. 4-298.
Image title	Mass and energy balances determine gas density and volume before the smoke interface is calculated. Source basis: Van Rossum (2027), §9.3; Milke (2002), p. 4-298.
Width	900
Height	600