File:Fse-fire-spread-v1.svg

Fse-fire-spread-v1.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)

Summary

Four fire-spread pathways to new fuel. Based on Australian Building Codes Board et al. (2005), p. 1.6-7.

Diagram for the article Fire spread (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board et al. (2005), p. 1.6-7 and p. 2.6-12
Alt text: Fire reaching new fuel through flames, radiation, a wall and flying embers.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:49, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:52, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:14, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Upload fse-fire-spread-v1.svg: diagram for Fire spread (level-1 visual plan V1)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Fire reaching new fuel through flames, radiation, a wall and flying embers.
Image title	Cross-section of a burning room. Flames leave the window opening and touch an awning above it (direct flame). Wavy arrows carry radiation across a gap to a neighbouring building. Heat is conducted through the intact wall to a cabinet in the adjacent room. Wind carries embers and burning debris over the roof to land on the adjacent roof. A star marks a possible new ignition at each target.
Width	900
Height	600