File:Fse-conduction-v2.svg

Fse-conduction-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Layer resistances add in the steady series model. Based on Van Rossum (2027), §5.2.

Diagram for the article Conduction (Fire Safety Academy wiki, level 1 Basic).

Source basis: Van Rossum (2027), §5.2
Alt text: Three material layers with resistances adding between hot and cold surfaces.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:48, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:51, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	07:21, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-conduction-v2.svg: diagram for Conduction (level-1 visual plan V2)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Three material layers with resistances adding between hot and cold surfaces.
Image title	A composite construction of three layers of different thickness and material (shown by different hatching) lies between a hot surface and a cold surface. A heat-flow arrow crosses all three layers in turn. Below, the same path is drawn as three resistors R1, R2 and R3 in series, so that the total resistance is R = R1 + R2 + R3 in the steady one-dimensional model.
Width	900
Height	600