Skip to content
From Fire Safety Academy Wiki
Revision as of 00:43, 16 November 2026 by Peter (talk | contribs) (Wiki review: corrected 1 error: content (Claude Opus 5.5))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Contents
  1. 1Role and scope
  2. 2Historical development
  3. 3Types of personnel
  4. 4Governing bodies and legal forms
  5. 5Internal structure
  6. 6Staffing, schedules and budgets
  7. 7Evaluating the organisation
  8. 8Organisation in fire engineering and other countries
  9. 9See also
  10. 10Notes
  11. 11References

Fire department organisation is the way a community's fire service is set up to deliver firefighting, rescue and related emergency services. It covers the body that governs and funds the service, the kind of personnel who staff it, and the arrangement of its stations, companies and officers into a chain of command. In the United States, public fire protection is most often a function of local government, and fire departments are organised in many different ways to meet the needs of their communities.[1] A department may be staffed by career, part-time or volunteer personnel, or by any combination of these.[1] Its organisational plan should set out the roles of line personnel, who deliver services directly to the public, and of staff personnel, who support them.[1][2] The basic tactical unit is the company: a group of firefighters operating one or more fire apparatus under a company officer.[3]

Most departments are still structured around fire suppression, but many also emphasise fire prevention and public education, and most have taken on emergency medical and technical rescue services.[1] Most of the data and practices below describe the United States around 2000–2006, as reported in the 2008 edition of the NFPA Fire Protection Handbook. Fire engineering guidance from Australia, New Zealand and other countries is added where it touches on the organisation of the fire service.

Role and scope

Fire departments developed early systems that broke down the work at a fire into tasks assigned to engine and ladder crews.[1] Each person on an apparatus performed set functions in a fixed sequence, so that the crew worked as one coordinated unit and effort was not duplicated.[1] Most public fire departments are still structured around this traditional mission of fire suppression.[1] Many now also emphasise fire prevention and public education, which Denlinger (2008) describes as more effective ways to protect life and property.[1] Most have taken on emergency medical and technical rescue services, and some also review building plans, determine fire causes and enforce the fire code.[1]

Public fire protection in the United States is usually provided by local government.[1] State, provincial and federal agencies also run fire services, mainly for wildland fire protection on public land or for structural fire protection of government property.[1] Large industries often organise their own fire departments at industrial complexes or contract with private ones.[1] Denlinger (2008) puts the number of US fire departments at more than 26,000, citing a needs assessment published in 2002.[1] A table for 2005 in another chapter lists about 30,500 local fire departments, 48,400 fire stations and 81,200 pumpers rated at 500 US gallons per minute (about 1,890 L/min) or more.[4]

The workload of US fire departments more than doubled between 1980 and 2004, led by an increase of 179 percent in emergency medical calls.[4] In 2004, medical aid made up 62 percent of fire department calls, false alarms 9 percent, fires 7 percent and mutual aid 4 percent.[5] Fires still demanded most of a department's resources, and the potential to overload a department's total resources came primarily from fires.[5] In most departments that provide fire-based emergency medical services, medical runs account for 60 to 75 percent of emergency call volume.[6] These two kinds of demand complicate planning. Medical calls need a swift response with a minimum of equipment and personnel, whereas fire calls need a swift response with a large complement of both.[5]

Horizontal bar chart of US fire department calls in 2004 by type; medical aid 62 percent, fires 7 percent
US fire department calls by type in 2004. Medical aid made up 62 percent of calls and fires 7 percent.

Historical development

One of the earliest organised fire services was the vigil, a watch service created in Rome in 24 BC under Augustus.[7] After the Great Fire of London in 1666, several insurance companies created fire brigades that fought fires only in the properties they insured and had no lifesaving duties.[7] In London these brigades were combined in 1833 into the London Fire Engine Establishment, which the Metropolitan Fire Brigade took over in 1865.[7] In Edinburgh, the brigade chief James Braidwood trained 80 part-time aides in regular drills and in 1830 wrote the first full handbook on fire department operations, with 396 standards.[8]

In North America, New Amsterdam (now New York City) appointed five municipal fire wardens in 1648, which is often considered the origin of the first public fire department on the continent.[8] Boston established the first paid municipal fire department in North America in 1678, with 12 firefighters and a fire chief. From the start, Massachusetts jurisdictions paid their firefighters on an on-call basis, whereas the other colonies later organised unpaid volunteer fire companies.[8]

A lack of discipline within volunteer brigades and their resistance to pumps and steam engines led to paid fire departments.[9] In Cincinnati, a paid department with horse-drawn steam engines entered service on 1 April 1853.[9] Paid firefighters worked a continuous-duty system until the First World War; by the Second World War most paid departments had adopted a two-platoon system.[9] The US Fair Labor Standards Act of 1975 set the maximum working week of a firefighter at 53 hours, with higher pay for hours above it.[9]

Types of personnel

Career personnel are assigned regular periods of duty and are paid on a regular basis.[9] On-call or volunteer personnel are not normally required to be available except for meetings, training sessions and emergency responses, and they may or may not be paid for their services.[9] Call firefighters have no regular duty shift in the stations but are paid by the hour or by the incident. Under US federal labour rules they count as paid employees, even when loosely called volunteers.[10] A combination department mixes these groups. Some communities have a career chief, officers or apparatus operators and rely on volunteers for the rest, while others use career personnel only in the daytime.[9]

As of 2006, an estimated 313,300 career firefighters and frontline supervisors and 823,650 on-call or volunteer firefighters served in the United States.[9] As an illustration, these two numbers put career personnel at about 28 percent of the total.[9] Resource data for 2005 give a similar picture: departments made up entirely or mostly of career firefighters were 12 percent of local departments but protected 61 percent of the population.[4] In the same year, 27 percent of local firefighters were career firefighters, and most volunteers served rural communities of fewer than 2,500 people.[4] According to a 2002 study, 84 percent of communities with 2,500 to 4,999 inhabitants and 96 percent of those below 2,500 were served by all-volunteer departments.[11] Most towns of 25,000 or more employed career personnel.[9]

Two-panel chart: US career and volunteer firefighter numbers in 2006, and career departments' share of departments and population in 2005
Career and volunteer firefighters in the United States. Left: personnel in 2006. Right: departments that are all or mostly career, as a share of departments and of population protected, 2005.

The volunteer contribution is large in economic terms. Ramachandran (2002b) estimates, with one costing approach, that the time donated by roughly 800,000 US volunteers would be worth roughly as much as all reported spending on local fire protection.[12] In the data behind that estimate, departments that were all or mostly volunteer protected 43 percent of the population.[12] Because this mostly rural population had a much higher fire rate per head, volunteers responded to the majority of fires.[12]

Denlinger (2008) states that many career, combination and volunteer departments provide an acceptable level of service, and that success depends on the ability of the personnel to perform, not on whether they are paid.[13] There are no simple guidelines on the type of personnel to use, and the choice must be made locally.[14] Five factors influence it: the community's financial resources, the availability of on-call or volunteer personnel, the frequency of incidents, the range of services expected, and the type of department the community prefers.[14] In fast-growing suburbs, residents often work elsewhere and cannot respond in the daytime, so many once-volunteer departments have added career personnel.[14] A high incident frequency tends to overwhelm a volunteer operation unless the membership is large.[14] Departments are therefore advised to record how many volunteers respond to each call and how long they take, for weekdays and weekends separately.[14]

The type of personnel affects response times. In combination departments, on-duty career staff take the apparatus to the fire while volunteers go directly to the scene, which saves an average of about 3 minutes in arrival time.[10] The International Fire Engineering Guidelines (2005) note that dispatch time may vary with the type of fire service: a station with full-time paid firefighters is likely to respond faster than a volunteer station.[15] Denlinger (2008) also warns that a long roster of volunteer names can hide the fact that most are no longer active, which has led to serious delays in the past.[10] In every case, there should be one fire department in a jurisdiction, under a single chain of command known to all members.[10]

Governing bodies and legal forms

Most public fire services in North America are established by local governments or by independent local bodies created for fire protection.[14] One of the most common forms is the city fire department. Its head reports to the chief administrative officer of the municipality, usually the city manager or mayor, or in some cases to a fire commission.[14] A less common form is the fire bureau, usually a division of a department of public safety that also manages police and emergency call-centre services. This public safety model has grown in acceptance since 11 September 2001.[14] In a county fire department, suburban municipalities join to obtain a large, professionally administered department that none of them could afford alone.[14]

A fire district is a separate, independent unit of government formed under state or provincial law, usually after a vote of residents.[16] It has its own governing body and is commonly funded by a tax levied throughout the district.[16] A fire protection district is a tax-supported unit that, in some states, contracts for fire protection from a nearby career or volunteer fire department.[16] Volunteer fire companies or associations raise part of their funds through public activities and sometimes subscriptions, although tax money provides most of their funding.[16]

Neighbouring departments can also share work without merging. Granito (2008) notes that combining two very weak departments does not typically result in a strong one.[17] As an alternative, departments may use "functional consolidation": they keep their autonomy but share dispatch, stations, purchasing, training, special response teams or fire prevention.[17] Under automatic reciprocal aid agreements, two or more departments are dispatched through one emergency call centre as though they were a single department.[18]

Private workplaces form a separate group. In the United States, a facility that chooses to organise an industrial fire brigade must comply with the OSHA standard 29 CFR 1910.156, "Industrial Fire Brigades", and should follow NFPA 600.[19] Snyder (2008) describes five options for a facility, from no employee fighting fires at all to an organised brigade that fights fires beyond the incipient stage.[20] An organised brigade has a written organisational statement and a leadership structure: a brigade chief with overall responsibility, assistant chiefs as senior officers on each shift, and captains who direct crews.[21]

Internal structure

One basic principle of organisation is that work is divided among individuals and units according to a plan based on functions, such as fire prevention, training and communications.[22] A second principle is that the need for formal coordination grows with the size and complexity of a department, because small departments allow frequent personal contact.[22] Five to seven subordinates per supervisor are generally considered ideal for a manageable span of control, adjusted for the complexity and volume of the work.[2] The fire chief coordinates the whole system by organising, planning, directing, controlling and analysing the work of the department.[2]

Work in a fire department is divided into line and staff functions. Line functions deliver service directly to the public: emergency response and fire prevention, including inspections, plan review, public education and fire investigation.[2] Staff functions support the service units: training, maintenance, communications, research and planning, public information, financial management, personnel management and fire protection engineering.[2] In large departments a staff officer normally supervises each staff function. In small departments line officers may also take on staff duties, and in the smallest the chief or assistant chief may perform many of them directly.[2]

Tree diagram dividing fire department work into line functions and staff functions with their main tasks
Line and staff functions in a fire department.

Denlinger (2008) gives typical organisational charts for small, medium and large departments.[2] The chart for a small department shows a fire chief and a deputy chief, two engine companies and one ladder company, and separate units for prevention, education and investigation, for training and for safety.[23] The medium-sized department has three deputy chiefs, for support services (preparedness), fire suppression (response) and fire prevention, with the suppression companies grouped into three battalions.[23] The large department adds a deputy chief for administrative services, covering finance, personnel, data analysis and records, and a fire marshal as deputy chief for prevention.[3] Its prevention branch has separate units for new, existing and sprinkler inspections and for plan review, and its suppression branch is divided into three divisions and five battalions.[3] Every department needs written rules and regulations, a code of conduct and standard operating procedures, because hazardous work requires a clear understanding of expected performance.[23]

Organisational chart of a medium-sized fire department: chief, three deputy chiefs, battalions and companies
Typical organisational chart of a medium-sized fire department.

In many small departments the fire chief supervises field operations, while larger departments group companies into battalions or districts under intermediate-level command officers.[3] The engine company is the most common type, and its basic task is to deliver water through hose lines from a pumper that carries hose, nozzles, a water tank, a pump and ground ladders.[3] In most cases at least one engine company is based at each station.[3] A ladder or truck company operates an aerial ladder or elevating platform and performs search and rescue, forcible entry, ventilation, salvage and overhaul.[24] In a densely developed city, one ladder company may be provided for every two or three engine companies.[25] In rural areas, ladder tasks are often given to engine companies carrying extra equipment.[25]

Fire station with a pumper and an aerial ladder truck parked side by side in the open apparatus bays
An engine (pumper) and a ladder truck parked side by side at a fire station.

Rescue companies specialise in technical rescue, and some departments run special units for brush fires, water supply, foam, hazardous materials or command.[25] Klaene and Sanders (2008) note that dividing fireground work into engine tasks (extinguishing the fire) and truck tasks (entry, laddering, ventilation and evacuation) simplifies deployment, even for departments without aerial apparatus.[26] NIST's report on the World Trade Center response of 2001 gives an example: a single five-alarm fire in New York would involve about four battalions, with 20 engine and 8 ladder companies at the scene.[27] The report also notes that in career departments accountability typically begins at the fire station. An officer checks that the company roster is complete for the shift, and a riding list records each firefighter's position and assignment.[28]

Staffing, schedules and budgets

In most fire departments, the large majority of personnel work in the emergency response division, while prevention and preparedness each take a small percentage.[29] Because response positions must be covered 24 hours a day, most departments use a three- or four-platoon system, which corresponds to an average working week of 56 or 42 hours respectively.[29] A four-platoon system requires about a third more personnel than a three-platoon system.[29] How many firefighters ride on each apparatus, and how many must be employed to keep those seats filled, is treated in fire company staffing.

Personnel costs are the largest part of a fire department's budget, accounting for about 85 to 90 percent of the total spending of a fully paid department.[30] Fire apparatus costs normally run at 2 to 3 percent of payroll costs.[30] Nationally, the cost of firefighting organisations is one of the core components of the total cost of fire. In the United States it is typically dominated by the cost of municipal career services.[31] Compared with other countries reporting such data, the United States tends to spend one of the higher percentages of its gross domestic product on firefighting organisations.[31]

Evaluating the organisation

Effectiveness in the fire service is difficult to measure, because the number of fires and the losses that a department has prevented cannot easily be assessed.[32] The fact that most fires are suppressed with minimal losses does not show conclusively that the service is adequate, and a large-loss fire does not necessarily mean that the department is inadequate.[33] Departments therefore rely on regional and national loss experience to set their standards, and on frequent training and assessment of companies for fireground benchmarks.[33]

National standards also shape organisation. In 2001 the NFPA consensus process produced NFPA 1710 for substantially career departments and NFPA 1720 for substantially volunteer departments.[34] As described by Granito (2008), NFPA 1710 (2004 edition) deals with response times for the first-due engine company and the full first alarm, and with the number of firefighters for the initial attack.[34] The 2004 edition of NFPA 1720 recognises that volunteers are usually not at the station, so its minimum numbers of firefighters and its maximum response times depend on population density.[34] Departments can also seek accreditation through the Commission on Fire Accreditation International, which provides a standardised self-assessment with the help of a visiting team.[35] These methods, together with standards of cover and fire service performance measurement, link the design of the organisation to the level of service a community expects.

Organisation in fire engineering and other countries

Outside the United States, Granito (2008) describes integrated risk management, a planning method first developed in the United Kingdom.[36] Under the 2003 UK government white paper, fire and rescue authorities had to allocate suppression resources on the basis of risk, not the number of buildings in an area.[36] They also had to make local plans based on local risks.[36] The same approach requires crewing levels that are adequate and therefore safe for the tasks.[37]

Performance-based building design depends on the actual local fire service. The International Fire Engineering Guidelines (2005) list the type of fire service available (full-time/permanent or volunteer) and its capability and resources among the protective measures of the fire services intervention sub-system.[38] The Australian Fire Brigade Intervention Model described there is said to suit most service types, crew sizes and resource limitations, but the local fire service must validate many of its inputs.[39] In New Zealand, the commentary on Verification Method C/VM2 (2013) states that the officer in charge ultimately decides whether firefighting crews are committed to a burning building.[40] Writing in the Dutch context, Van Rossum (2027) notes that a positive fire engineering result does not mean the fire service will mount an interior attack. That decision always rests with the fire service on scene.[41]

See also

Notes

  1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 Denlinger (2008), p. 12-51.
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Denlinger (2008), p. 12-61.
  3. ↑ 3.0 3.1 3.2 3.3 3.4 3.5 Denlinger (2008), p. 12-63.
  4. ↑ 4.0 4.1 4.2 4.3 Hall and Cote (2008), p. 3-27.
  5. ↑ 5.0 5.1 5.2 Hall and Cote (2008), p. 3-28.
  6. ↑ Denlinger (2008), p. 12-58.
  7. ↑ 7.0 7.1 7.2 Denlinger (2008), p. 12-52.
  8. ↑ 8.0 8.1 8.2 Denlinger (2008), p. 12-53.
  9. ↑ 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 Denlinger (2008), p. 12-54.
  10. ↑ 10.0 10.1 10.2 10.3 Denlinger (2008), p. 12-75.
  11. ↑ Denlinger (2008), p. 12-74.
  12. ↑ 12.0 12.1 12.2 Ramachandran (2002b), p. 5-86.
  13. ↑ Denlinger (2008), pp. 12-54–12-55.
  14. ↑ 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 Denlinger (2008), p. 12-55.
  15. ↑ National Research Council of Canada et al. (2005), p. 1.9-2.
  16. ↑ 16.0 16.1 16.2 16.3 Denlinger (2008), p. 12-56.
  17. ↑ 17.0 17.1 Granito (2008), p. 12-13.
  18. ↑ Denlinger (2008), p. 12-65.
  19. ↑ Schmidt (2008), p. 1-145.
  20. ↑ Snyder (2008), pp. 12-192–12-193.
  21. ↑ Snyder (2008), p. 12-193.
  22. ↑ 22.0 22.1 Denlinger (2008), p. 12-60.
  23. ↑ 23.0 23.1 23.2 Denlinger (2008), p. 12-62.
  24. ↑ Denlinger (2008), pp. 12-63–12-64.
  25. ↑ 25.0 25.1 25.2 Denlinger (2008), p. 12-64.
  26. ↑ Klaene and Sanders (2008), p. 13-7.
  27. ↑ Lawson and Vettori (2005), p. 141.
  28. ↑ Lawson and Vettori (2005), p. 55.
  29. ↑ 29.0 29.1 29.2 Denlinger (2008), p. 12-72.
  30. ↑ 30.0 30.1 Denlinger (2008), p. 12-67.
  31. ↑ 31.0 31.1 Ramachandran (2002b), p. 5-80.
  32. ↑ Denlinger (2008), p. 12-70.
  33. ↑ 33.0 33.1 Denlinger (2008), p. 12-71.
  34. ↑ 34.0 34.1 34.2 Granito (2008), p. 12-5.
  35. ↑ Granito (2008), p. 12-7.
  36. ↑ 36.0 36.1 36.2 Granito (2008), p. 12-3.
  37. ↑ Granito (2008), p. 12-4.
  38. ↑ National Research Council of Canada et al. (2005), p. 1.2-10.
  39. ↑ National Research Council of Canada et al. (2005), p. 2.9-2.
  40. ↑ Ministry of Business, Innovation and Employment (2013), p. 151.
  41. ↑ Van Rossum (2027), §9.3.

References

  • Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
  • Granito, J. A. (2008). Planning for public fire-rescue protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-3–12-22). National Fire Protection Association.
  • Hall, J. R., Jr., & Cote, A. E. (2008). An overview of the fire problem and fire protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-3–3-30). National Fire Protection Association.
  • Klaene, B. J., & Sanders, R. (2008). Fireground operations. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-3–13-11). National Fire Protection Association.
  • Lawson, J. R., & Vettori, R. L. (2005). The emergency response operations (NIST NCSTAR 1-8). National Institute of Standards and Technology.
  • Ministry of Business, Innovation and Employment. (2013). Commentary for Building Code clauses C1–C6 and Verification Method C/VM2.
  • National Research Council of Canada, International Code Council, Department of Building and Housing, & Australian Building Codes Board. (2005). International fire engineering guidelines (2005 ed.). Australian Building Codes Board.
  • Ramachandran, G. (2002b). Measuring fire consequences in economic terms (J. R. Hall Jr., Rev.). In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-79–5-92). National Fire Protection Association; Society of Fire Protection Engineers.
  • Schmidt, D. L. (2008). Emergency management and business continuity. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-137–1-156). National Fire Protection Association.
  • Snyder, M. (2008). Industrial fire loss prevention. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-177–12-198). National Fire Protection Association.
  • Van Rossum, E. (2027). Introduction to Fire Safety Engineering. Fire Safety Academy.