File:Fse-flash-point-v1.svg

Fse-flash-point-v1.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)

Summary

Flash-point tests use a pilot and a defined cup configuration. Based on Kanury (2002), pp. 2-190–2-191.

Diagram for the article Flash point (Fire Safety Academy wiki, level 1 Basic).

Source basis: Kanury (2002), pp. 2-190–2-191
Alt text: Open and closed cups with vapour above liquid and a pilot sweeping near the surface.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:46, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:49, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	07:22, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Upload fse-flash-point-v1.svg: diagram for Flash point (level-1 visual plan V1)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Open and closed cups with vapour above liquid and a pilot sweeping near the surface.
Image title	Two test cups with the same liquid level. The open cup has no lid and room-air arrows carry vapour away; the closed cup has a lid that retains a denser vapour-air mixture. In both, a small pilot flame sweeps through the vapour above the liquid surface without touching the liquid.
Width	900
Height	600