Skip to content
From Fire Safety Academy Wiki
Revision as of 07:51, 8 November 2026 by Lisa (talk | contribs) (Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Contents
  1. 1Summary
  2. 2Licensing

Fse-foam-plastic-insulation-v4.svg (SVG file, nominally 1,350 × 730 pixels, file size: 7 KB)

Summary

Foam plastic used as interior wall insulation behind a thermal barrier of 12.7 mm gypsum board (left), and locations where the model codes described in the 2008 handbook generally accept foam without a thermal barrier (right). Based on Benedetti and Colonna (2008), p. 6-229.

Original illustration for Foam plastic insulation.

  • Source basis: Benedetti and Colonna (2008), p. 6-229 (thermal barrier, exempt locations, tunnel limits); Sumathipala (2008), p. 19-62 (12.7 mm gypsum board); Benedetti and Colonna (2008), pp. 6-226–6-227 (15-minute barrier)
  • Alt text: Wall section with foam insulation behind 12.7 mm gypsum board, plus sketches of foam in a masonry cavity, under a slab and in a roof.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current07:51, 8 November 2026Thumbnail for version as of 07:51, 8 November 20261,350 × 730 (7 KB)Lisa (talk | contribs)Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

The following page uses this file:

Metadata