File:Fse-required-safe-egress-time-v4.svg

Fse-required-safe-egress-time-v4.svg (SVG file, nominally 900 × 600 pixels, file size: 10 KB)

Summary

Safety factors on RSET in NEN 6060 and NEN 6079 for the rule-of-thumb method, as reproduced in the Introduction to Fire Safety Engineering. Based on Van Rossum (2027), §7.1.

Original vector illustration for Required safe egress time, level 2 Intermediate.

Source basis: Van Rossum (2027), §7.1 (Table A.1 of NEN 6060 and NEN 6079 as reproduced in the book; redraw as a chart, do not copy the table)
Alt text: Grouped bars of required ASET/RSET factors for new and existing buildings, conservative and nominal inputs, RSET up to and over 3 minutes; values 1.0 to 2.5.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:35, 2 November 2026		900 × 600 (10 KB)	Lisa (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

File usage

The following page uses this file:

Required safe egress time

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Safety factors on RSET in NEN 6060 and NEN 6079 for the rule-of-thumb method, as reproduced in the Introduction to Fire Safety Engineering. Based on Van Rossum (2027), §7.1.
Image title	Grouped bars of required ASET/RSET factors for new and existing buildings, conservative and nominal inputs, RSET up to and over 3 minutes; values 1.0 to 2.5. Source basis: Van Rossum (2027), §7.1 (Table A.1 of NEN 6060 and NEN 6079 as reproduced in the book; redraw as a chart, do not copy the table)
Width	900
Height	600