File:Fse-hydraulic-calculation-v2.svg

Fse-hydraulic-calculation-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 9 KB)

Summary

Sample area and density curve converted to SI units. Any point on or to the right of the line is acceptable; the marked point is the selection of 6.1 mm/min over 223 m². Based on Fleming (2002), p. 4-74.

Original illustration for Hydraulic calculation, level 4 Expert.

Source basis: Fleming (2002), p. 4-74 (Example 1 and the sample area/density curve in Figure 4-3.1: redraw, do not copy)
Alt text: Chart of design area against water density: a falling straight line from 465 m2 at 4.1 mm/min to 139 m2 at 6.9 mm/min, region to its right shaded.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:28, 2 November 2026		900 × 600 (9 KB)	Jan (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

File usage

The following page uses this file:

Hydraulic calculation

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Sample area and density curve converted to SI units. Any point on or to the right of the line is acceptable; the marked point is the selection of 6.1 mm/min over 223 m². Based on Fleming (2002), p. 4-74.
Image title	Chart of design area against water density: a falling straight line from 465 m2 at 4.1 mm/min to 139 m2 at 6.9 mm/min, region to its right shaded. Source basis: Fleming (2002), p. 4-74 (Example 1 and the sample area/density curve in Figure 4-3.1: redraw, do not copy)
Width	900
Height	600