File:Fse-adiabatic-surface-temperature-v4.svg

Fse-adiabatic-surface-temperature-v4.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)

Summary

Set-up of the 2008 SP adiabatic surface temperature experiments: a 450 kW propane burner and a steel beam 20 cm below the ceiling, with measurement stations A, B and C. Based on Stroup et al. (2016), pp. 3-17–3-18.

Original illustration for Adiabatic surface temperature, level 4 Expert.

Source basis: Stroup et al. (2016), pp. 3-17–3-18 (compartment, door, wall construction, beam position, burner size and position, measurement stations; Figure 3-10 there: redraw, do not copy)
Alt text: Test room 3.6 m deep with a door, a burner in the corner and a steel beam under the ceiling with three measurement stations.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:25, 2 November 2026		900 × 600 (8 KB)	Jan (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

File usage

The following page uses this file:

Adiabatic surface temperature

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Set-up of the 2008 SP adiabatic surface temperature experiments: a 450 kW propane burner and a steel beam 20 cm below the ceiling, with measurement stations A, B and C. Based on Stroup et al. (2016), pp. 3-17–3-18.
Image title	Test room 3.6 m deep with a door, a burner in the corner and a steel beam under the ceiling with three measurement stations. Source basis: Stroup et al. (2016), pp. 3-17–3-18 (compartment, door, wall construction, beam position, burner size and position, measurement stations; Figure 3-10 there: redraw, do not copy)
Width	900
Height	600