Contents
Fse-multi-sensor-detector-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)
Summary
An analogue multi-sensor detector sends measured values, not only an alarm state, to the control panel. Based on Iqbal and Salley (2004), pp. 11-5 to 11-6, and Australian Building Codes Board (2020a), pp. 96-97.
Original vector illustration for Multi-sensor detector, level 2 Intermediate.
- Source basis: Iqbal and Salley (2004), p. 11-5 (conventional go/no-go detectors) and p. 11-6 (analogue sensors, dirty or too sensitive, combination units); Australian Building Codes Board (2020a), p. 96 (addressable loop) and p. 97 (dirty detectors, alert before main alarm); Schifiliti et al. (2002), p. 4-22 (response algorithms)
- Alt text: Block diagram: smoke and heat sensors in one detector send values over a loop to a panel that gives pre-alarm, alarm or dirty warnings.
Licensing
New drawing by Fire Safety Academy. © Fire Safety Academy.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:18, 2 November 2026 | | 900 × 600 (8 KB) | Lisa (talk | contribs) | Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity |
You cannot overwrite this file.
File usage
The following page uses this file:
