File:Fse-standard-fire-curve-v2.svg

Fse-standard-fire-curve-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Principle of a furnace test: burners are controlled so that the average furnace temperature follows the standard curve. Based on Milke (2002a), p. 4-210, and Iqbal and Salley (2004), p. 17-2.

Original vector illustration for Standard fire curve, level 2 Intermediate.

Source basis: Milke (2002a), p. 4-210 (gas burners, furnace follows curve); Iqbal and Salley (2004), p. 17-2 (average of at least eight thermocouples, readings at intervals of at most 1 minute)
Alt text: Section through a wall furnace: gas burners heat the chamber, thermocouples measure the gas temperature, and a wall specimen closes one side.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:15, 2 November 2026		900 × 600 (7 KB)	Lisa (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

File usage

The following page uses this file:

Standard fire curve

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Principle of a furnace test: burners are controlled so that the average furnace temperature follows the standard curve. Based on Milke (2002a), p. 4-210, and Iqbal and Salley (2004), p. 17-2.
Image title	Section through a wall furnace: gas burners heat the chamber, thermocouples measure the gas temperature, and a wall specimen closes one side. Source basis: Milke (2002a), p. 4-210 (gas burners, furnace follows curve); Iqbal and Salley (2004), p. 17-2 (average of at least eight thermocouples, readings at intervals of at most 1 minute)
Width	900
Height	600