Skip to content
From Fire Safety Academy Wiki
Revision as of 17:06, 2 November 2026 by Lisa (talk | contribs) (Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Contents
  1. 1Summary
  2. 2Licensing

Fse-fuel-controlled-fire-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Typical course of a compartment fire: fuel controlled during growth, usually ventilation controlled after flashover, and fuel controlled again during decay. Based on Van Rossum (2027), §4.11 and Walton and Thomas (2002), pp. 3-171 to 3-172.

Original vector illustration for Fuel-controlled fire, level 2 Intermediate.

  • Source basis: Van Rossum (2027), §4.8 and §4.11 (development phase fuel controlled, developed fire usually ventilation controlled, decay); Walton and Thomas (2002), p. 3-171 (growth stage, Figure 3-6.1: redraw, do not copy) and p. 3-172 (decay may change from ventilation to fuel control); Australian Building Codes Board (2020a), Data Sheet B1, p. 14
  • Alt text: Schematic heat release rate curve: growth, plateau after flashover and decay, with growth and decay shaded as fuel controlled.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:06, 2 November 2026Thumbnail for version as of 17:06, 2 November 2026900 × 600 (7 KB)Lisa (talk | contribs)Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

The following page uses this file:

Metadata