File:Fse-section-factor-v2.svg

Fse-section-factor-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 8 KB)

Summary

The exposed faces change section factor and the initial rate in the stated convection-only example. Based on Van Rossum (2027), §§5.2 and 5.5, and Milke (2002), p. 4-222.

Original illustration for Section factor, level 3 Advanced.

Source basis: Van Rossum (2027), §§5.2 and 5.5; Milke (2002), p. 4-222; derived example in calculations/section-factor.py.
Alt text: Two 4 mm plates with one-face and two-face exposure and calculated initial heating rates.
Accuracy notes: No edge heating. The selected transient model differs from the book’s steady roof example; no radiation or full-fire claim.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:37, 2 November 2026		900 × 600 (8 KB)	Emma (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

You cannot overwrite this file.

File usage

The following page uses this file:

Section factor

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	The exposed faces change section factor and the initial rate in the stated convection-only example. Based on Van Rossum (2027), §§5.2 and 5.5, and Milke (2002), p. 4-222.
Image title	Two 4 mm plates with one-face and two-face exposure and calculated initial heating rates. Source basis: Van Rossum (2027), §§5.2 and 5.5; Milke (2002), p. 4-222; derived example in calculations/section-factor.py.
Width	900
Height	600