File:Fse-effective-heat-of-combustion-v3.svg

Fse-effective-heat-of-combustion-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

A calculated example using the PE/PVC cable-material entry and an assumed burning area of 1 m². Based on Iqbal and Salley (2004), pp. 3-3 and 3-6.

Original illustration for Effective heat of combustion, level 3 Advanced.

Source basis: Iqbal and Salley (2004), pp. 3-3 and 3-6, Table 3-4. Calculation checked in calculations.json; redraw, do not copy.
Alt text: Two calculation steps convert the published PE/PVC mass burning rate to about 110 kW for an assumed area of 1 m².
Accuracy notes: Label the area as assumed and the result as calculated. Do not present it as a full-scale cable test or a universal cable heat release rate.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:10, 2 November 2026		900 × 600 (7 KB)	Emma (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	07:25, 2 November 2026		900 × 600 (5 KB)	Emma (talk \| contribs)	Level 3 visual plan: fse-effective-heat-of-combustion-v3.svg

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	A calculated example using the PE/PVC cable-material entry and an assumed burning area of 1 m². Based on Iqbal and Salley (2004), pp. 3-3 and 3-6.
Image title	Two calculation steps convert the published PE/PVC mass burning rate to about 110 kW for an assumed area of 1 m². Source basis: Iqbal and Salley (2004), pp. 3-3 and 3-6, Table 3-4. Calculation checked in calculations.json; redraw, do not copy.
Width	900
Height	600