File:Fse-flash-point-v3.svg

Fse-flash-point-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 6 KB)

Summary

Selected flash points tabulated in the 2005 IFEG. Based on Australian Building Codes Board et al. (2005), pp. 3.3-2–3.3-3.

Diagram for the article Flash point (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board et al. (2005), pp. 3.3-2–3.3-3, Table 1
Alt text: Flash points: benzene minus 11, toluene 4, styrene 31 and decane 46 °C.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:46, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:50, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	07:22, 2 November 2026	900 × 600 (3 KB)	Sanne (talk \| contribs)	Upload fse-flash-point-v3.svg: diagram for Flash point (level-1 visual plan V3)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Flash points: benzene minus 11, toluene 4, styrene 31 and decane 46 °C.
Image title	Horizontal bar chart of flash points from the 2005 International Fire Engineering Guidelines, Table 1. Bars start at 0 °C: benzene extends to minus 11 °C, toluene to 4 °C, styrene to 31 °C and decane to 46 °C. Axis from minus 20 to 50 °C.
Width	900
Height	600