File:Fse-smoke-control-v3.svg

Fse-smoke-control-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 6 KB)

Summary

Smoke-control acceptance covers the complete operating sequence. Based on Australian Building Codes Board (2020), pp. 129–131.

Diagram for the article Smoke control (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board (2020), pp. 129–131
Alt text: Detection leads through fan and damper states to boundary airflow and acceptance tests.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	16:00, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	09:05, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:09, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-smoke-control-v3.svg: diagram for Smoke control (level-1 visual plan V3)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Detection leads through fan and damper states to boundary airflow and acceptance tests.
Image title	Flowchart. Detect and locate the fire zone; this sets the fan state and the damper state; these together produce airflow across the protected boundary; that airflow is tested. A pass leads to acceptance. A defect leads to repair and retest, which returns to detection so the complete sequence is run again.
Width	900
Height	600