File:Fse-convection-v2.svg

Fse-convection-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

A plume feeds a convective ceiling jet. Based on Van Rossum (2027), §5.3 and Australian Building Codes Board et al. (2005), p. 2.5-2.

Diagram for the article Convection (Fire Safety Academy wiki, level 1 Basic).

Source basis: Van Rossum (2027), §5.3; Australian Building Codes Board et al. (2005), p. 2.5-2
Alt text: Rising plume turning sideways into a hot ceiling jet with surface heat transfer.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:48, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:51, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	07:22, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-convection-v2.svg: diagram for Convection (level-1 visual plan V2)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Rising plume turning sideways into a hot ceiling jet with surface heat transfer.
Image title	A fire plume rises from a fire on the floor, drawing in air from both sides below the ceiling. At the ceiling the flow turns and spreads horizontally in both directions as a thin, hot ceiling jet that continues beyond the drawing. Short wavy arrows show heat passing from the jet into the ceiling and into a detector mounted on the ceiling.
Width	900
Height	600