Skip to content
From Fire Safety Academy Wiki
Revision as of 18:53, 14 November 2026 by Linda (talk | contribs) (Add SVG figures fse-fire-based-emergency-medical-services-v1.svg, fse-fire-based-emergency-medical-services-v2.svg, fse-fire-based-emergency-medical-services-v3.svg, fse-fire-based-emergency-medical-services-v4.svg (list-8 visual plan))
Contents
  1. 1Definition and scope
  2. 2Development in the United States
  3. 3Scale and workload
  4. 4Organisation and levels of care
  5. 5Response time
  6. 6Fire casualties and responder health
  7. 7Mass casualty response: World Trade Center, 2001
  8. 8See also
  9. 9Notes
  10. 10References

Fire-based emergency medical services are emergency medical services (EMS) delivered by a fire department, from a first response with basic life support up to advanced life support and patient transport by ambulance.[1] In the United States, over the fifty years before 2008, fire-based EMS grew into the principal operational programme of most fire departments. In 2004, local fire departments answered 14.1 million EMS calls, 62 percent of all their emergency responses, and in 2005, 67 percent of departments provided EMS.[1] The fire service had by then grown into the largest provider of emergency medical care in the country, from prevention and system access through first response to transport.[2] Fire agencies saw themselves as well placed for the task, citing their trained workforce, command structure, communication systems and resources deployed for time-sensitive response.[3]

Response time is the measure most often used for an EMS system. US standards set targets such as 4 minutes of travel for a first responder and 8 minutes for an advanced life support unit.[4][5] This article describes the US system as presented in the 2008 edition of the NFPA Fire Protection Handbook, with the EMS operations at the World Trade Center in 2001 as a case.

Definition and scope

NFPA 450, Guide for Emergency Medical Services and Systems, defines an EMS system as a coordinated arrangement of resources and functions. These are organised to respond in a timely, staged manner to medical emergencies, whatever their cause. Krakeel (2008) stresses that EMS is neither a fast ambulance ride to an emergency room nor something delivered by the fire department alone. It is a set of coordinated activities and responsibilities that together deliver care to a person in need.[1] The fire department is therefore one participant in a wider system that also includes dispatch centres, hospitals, physicians, payers and public health agencies.[6]

The role of a fire department within this system varies. Some departments act only as first responders, while others also provide ambulance transport, and the level of care can range from first responder certification to paramedic.[7] Granito (2008) describes the capabilities needed as first aid, resuscitation and possibly advanced life support, or paramedical services. He defines paramedical services as emergency treatment beyond ordinary first aid, given by fire service personnel under the supervision of a physician, for example through radio communication and preapproved treatment protocols.[8]

Fire department paramedics wearing examination gloves practising patient care with a training mannequin on a stretcher beside fire and ambulance vehicles
A fire department crew practising emergency medical care with a training mannequin. Depending on the department, fire crews act as first responders or also transport patients.

Krakeel notes that the term "cross-trained dual-role fire fighter" was being replaced by the view that fire fighters respond to the needs of their community whatever the nature of the emergency. He also notes that "all EMS is local". The form of fire department involvement depends largely on the community served, although common elements apply to all systems.[1]

Development in the United States

Fire agencies had responded to rescues and delivered first aid since their founding, long before the term prehospital emergency medical services was defined.[9] Krakeel traces the modern system to five factors that came together in the mid-twentieth century: innovations in resuscitation, battlefield medical experience, the attributes of the fire service, cardiac research, and federal legislation and grants.[2] Drawing on battlefield experience, physicians documented the failures of US emergency care in a National Academy of Sciences study, Accidental Death and Disability: The Neglected Disease of Modern Society. It found that few communities funded adequate ambulance services and that, where these existed, they were usually maintained by the fire or police department.[2]

Cardiac research brought fire departments into advanced care. In 1969 the Columbus, Ohio, fire department introduced the "Heartmobile", one of the first advanced cardiac life support units. In 1969 the Miami fire department started the first paramedic programme in the United States, and a review quoted by Krakeel states that most of the early paramedic programmes were based in fire departments.[3] The National Highway Safety Act of 1966 placed federal responsibility for EMS in the Department of Transportation, which developed the first training curriculum for basic emergency medical technicians (EMTs). The Emergency Medical Services Systems Act of 1973 defined 15 core elements of an EMS system and promoted regional EMS councils.[3]

Federal money then shaped local services. Between 1966 and 1976 the federal government provided an estimated $200 million for EMS, mostly as grants to states and local communities. Many local governments used a matching programme with a 75 percent federal and 25 percent local share. These grants paid for ambulances and equipment and gave fire departments a greater role. Morticians, who before 1966 had provided more than half of all ambulance services, had essentially been replaced by 1976.[3]

In the 1980s federal funding declined, and many local governments turned to their fire departments to deliver EMS. In the 1990s, corporate transport firms withdrew from unprofitable markets, which led to more fire-based systems.[9] From the mid-1990s, local governments seeking economies of scale merged separate municipal ambulance services into their fire departments, for example in New York, San Francisco and St. Louis.[2]

Timeline from 1966 to 2005 with milestones of US fire-based emergency medical services
Milestones in the development of fire-based EMS in the United States up to 2008.

Krakeel lists the attributes that made fire departments suitable providers. They had a dedicated and trained workforce, practised command and control, established communication systems and the ability to work under emergency conditions. Their resources were also deployed across the community for time-sensitive response. Daily experience with medical emergencies, public trust and a history of EMS service complete the list.[3] Denlinger (2008) makes the same point: stations decentralised for rapid response and communication systems that dispatch help without delay form the foundation of effective EMS delivery.[10] In 1991 the International Association of Fire Chiefs (IAFC) and the International Association of Fire Fighters (IAFF) signed a joint memorandum defining the fire service role in EMS.[11]

Scale and workload

EMS came to dominate fire department workload. The number of US fire department calls more than doubled between 1980 and 2004, led by a 179 percent increase in emergency medical calls.[12] In 2004, medical aid made up 62 percent of all fire department calls, against 7 percent for fires, 9 percent for false alarms and 2 percent for hazardous materials.[13] Because about a third of communities did not offer EMS, departments that did could find that medical calls made up 80 to 90 percent of their calls.[12] Denlinger gives EMS a share of 60 to 75 percent of emergency calls in departments providing first-responder or transport service, and finds that EMS calls outnumbered fire alarms nationwide by more than six to one.[10]

Horizontal bar chart of US fire department calls in 2004 by type, with medical aid at 62 percent and fires at 7 percent
US fire department calls by type in 2004. Medical aid made up 62 percent of all calls, fires 7 percent.

Participation data differ with the source and its definition. In the 2005 national needs assessment, 67 percent of local fire departments provided EMS, up from 65 percent in 2001, and they protected 86 percent of the population. Most departments without EMS were all-volunteer departments in rural communities.[1][12] An IAFC survey of its members in 2000 found that over 90 percent of fire departments took part in EMS. More than half of the responding departments provided advanced life support transport.[11] A 2003 survey of state EMS directors classified 44.9 percent of EMS systems as fire based, 48.6 percent as neither fire nor hospital based, and 6.5 percent as hospital based.[14]

The level of training also varied. In late 2005, 98 percent of departments providing EMS had all involved personnel certified to at least first responder level. Only 26 percent had all of them certified to at least basic life support, and 3 percent had all of them certified to at least advanced life support. No department had all its involved personnel certified as paramedics, although 18 percent had at least some paramedics.[7] The 2005 needs assessment estimated that 36 percent of departments delivered EMS without having formally trained all the fire fighters involved.[15]

This workload poses a planning problem. Emergency medical calls need a swift response with little equipment and few people. Fires need a swift response with many people and much equipment, and the two may occur in different parts of a community.[13] The handbook nevertheless reports that combining the two missions had proved very efficient in many jurisdictions. Basic EMS equipment on engine and ladder companies staffed by EMT-certified fire fighters lets these units handle most life-threatening situations.[10]

Organisation and levels of care

The state certification levels described by Krakeel (2008) were first responder, basic EMT, intermediate EMT and paramedic.[7] The first responder level was generally limited to basic first aid and cardiopulmonary resuscitation (CPR). The basic EMT was the minimum certification to work on an ambulance, and many fire departments required it of their personnel. The paramedic could give medications and perform invasive procedures such as intubation and manual defibrillation under medical direction.[16]

In the United States, state agencies certify EMS personnel and license ambulance services, so service delivery varies from state to state.[7] A national scope of practice model completed in 2005 proposed a new sequence of emergency medical responder, EMT, paramedic and advanced practice paramedic. Its adoption was left to the state agencies, which generally hold statutory authority over training, certification and licensure.[17]

Service levels describe what is delivered to the patient: basic life support, advanced life support or critical care.[18] For ambulance payment, the national fee schedule of 2002 distinguished basic and advanced life support, emergency and non-emergency transports, and critical care transport. Advanced life support level 2 required at least one invasive procedure or at least three separate medications.[7]

The organisation of EMS within a Fire department organisation depends on the department's size and on whether it transports patients. In small departments that act only as medical first responders, existing staff share the EMS duties, and the fire chief usually deals directly with the medical director. Patient transport adds medical coordination, quality assurance, training and certification, billing, inventory control and equipment maintenance. Smaller transport departments place an EMS coordinator in the support services division, while larger ones use a separate divisional structure.[18]

Medical direction is common to both models.[14] EMS personnel are usually considered an extension of the physician. Online medical control covers decisions during patient care, while offline work covers protocols, training, quality review and other tasks.[19]

Two deployment and response patterns are common. In a single-tier system one organisation provides both the initial response and the transport, usually at advanced life support level; fire-based transport systems fall into this category. In a multiple-tier system one agency gives the first response and initial care while another transports, and the most common form is a fire-based first response supported by a separate public or private transport provider. Fire-based resources are, with few exceptions, deployed from fixed stations located by time and distance studies. Private and third-party providers of high-volume systems often move ambulances around the service area according to predicted demand, which is called system status management.[20]

Two flow diagrams: one fire department doing first response and transport, and a fire department first response with a separate transport provider
Single-tier and multiple-tier EMS response. The most common multiple-tier form was a fire-based first response supported by a separate public or private transport provider.

Response time

Emergency response time is the single performance measure most often used for an EMS system. According to the American Heart Association, quoted by Krakeel (2008), "Passage of time drives all aspects of emergency cardiac care and determines patient outcomes". Studies by Eisenberg in the late 1970s found a statistically higher probability of survival for patients who received CPR within the first 4 to 6 minutes, followed by advanced care within 8 minutes. The 8-minute target for advanced life support was later widely adopted.[4]

Response time is a sum of intervals that belong to different participants. NFPA 450 provides a time template of 18 time stamps, from the event to the moment the unit is available again, so that agencies define the intervals in the same way. For example, call processing runs from the phone ringing at the first public safety answering point (PSAP) to unit acknowledgement. Turnout runs from acknowledgement to the wheels turning, and travel from the wheels turning to arrival at the scene.[16]

NFPA 1710 uses related stages. Its dispatch time runs from receipt of the alarm at the PSAP until the units are notified, and its turnout time runs from their acknowledgement until they are en route. "Response time" in that standard means travel to the scene.[5] The NFPA 450 template places unit acknowledgement after dispatch, so that interval must also be counted. The time from call receipt to unit arrival at the scene is therefore:[16]

Timeline showing dispatch, unit acknowledgement, turnout and travel before scene arrival, with NFPA interval targets and the CAAS starting point
EMS response-time intervals (US practice, 2008). The 360 s and 600 s sums omit the untargeted acknowledgement interval, while CAAS starts at unit notification.

tscene=td+tack+tto+ttr

Symbol Description Unit
tscene Time from receipt of the call at the PSAP to arrival of the unit at the scene s
td Dispatch time: receipt of the call until the units are notified s
tack Acknowledgement interval: unit notification until unit acknowledgement s
tto Turnout time: acknowledgement of notification until the unit is en route s
ttr Travel time, called "response time" in NFPA 1710: en route until arrival at the scene s

The US standards described in the handbook set targets for dispatch, turnout and travel. NFPA 1221 requires dispatch within 60 seconds at least 95 percent of the time. NFPA 1710 sets a turnout time of 60 seconds and a travel time of 240 seconds for a unit with first responder or higher capability. For an advanced life support unit, where the fire department provides that service, the travel time is 480 seconds. Each NFPA 1710 objective must be met for at least 90 percent of calls.[5] The Commission on Fire Accreditation International (CFAI) also requires a turnout of 60 seconds in urban and suburban areas.[4]

As a worked example, adding the three published NFPA targets for dispatch, turnout and first-responder travel gives a numerical sum that excludes acknowledgement time:

td+tto+ttr=60 s+60 s+240 s=360 s=6 min

For an advanced life support unit the corresponding three-target sum is 60 s + 60 s + 480 s = 600 s, or 10 minutes.[5] Neither sum is a call-to-scene target: both omit the acknowledgement interval and combine targets with different compliance percentages. They also exclude the time before the call reaches the PSAP, which the NFPA 450 template counts from the event and its discovery.[16]

Other bodies measure from other starting points. The Commission on Accreditation of Ambulance Services (CAAS) allows 8 minutes 59 seconds for an advanced life support ambulance in urban and suburban areas, counted from notification of the response unit. It expects 90 percent compliance for life-threatening calls.[4][21] As an illustration, the NFPA 1710 turnout and advanced-life-support travel targets sum to 540 seconds after unit acknowledgement. The CAAS value is 539 seconds after unit notification, so the intervals are not directly comparable.[16] The US Centers for Medicare Services treated a response as an emergency if resources were mobilised and responding within 5 minutes of notification.[4]

Krakeel warns that without coordination between the agencies, the separate intervals have little value for judging whether a system performs as expected, since the failure of any participant affects the whole response.[22] The first interval belongs to the Emergency communications centre, which in most communities is the main access point for emergency medical care. Emergency medical dispatch, with a national curriculum from 1987, lets dispatchers determine the nature and priority of a call, send the right response and give self-help instructions to the caller until help arrives. Card-based protocols developed in the same year help the dispatcher choose between a basic and an advanced life support unit.[23][4]

Fire casualties and responder health

Smoke inhalation and burns are the most common causes of fire deaths in US fire data.[24] Gann and Bryner (2008) list three ways in which heat from a fire endangers people: skin burns, hyperthermia or heat stroke, and burns of the respiratory tract. These are among the Effects of heat on people.[25] An EMS officer interviewed by NIST explained that patients are normally transported according to their injury, for example to the closest trauma centre or the nearest burn centre.[26]

The US National Fire Incident Reporting System (NFIRS 5.0) has an EMS module, which state or local authorities may require, for core patient data. It was based on 80 data points agreed at a 1993 conference of the National Highway Traffic Safety Administration. It is not meant to replace a full patient care report.[27]

Fire fighters themselves also receive EMS care at incidents. At incident scenes, medical evaluation and treatment in the rehabilitation area should follow the department's EMS protocols, with at least basic life support available and advanced life support preferred. An ambulance or support crew should be assigned to rehabilitation during long or heavy-exertion operations. In hot weather, rehabilitation should provide fluids and a medical evaluation for members showing signs of heat exhaustion or heat stroke.[28]

The medical role brings its own risks for fire fighters, above all communicable and infectious disease. NFPA 1581 (1992 edition) set out a programme of protective clothing, immunisation, exposure reporting, cleaning of clothing and equipment, and training.[29] Teele (2008) describes NFPA 1999 as the product standard for EMS protective clothing. He says it was, at the time, the only standard whose tests checked each type of EMS protective equipment for a barrier against blood-borne pathogens in the body areas it covered. Barrier materials and seams are exposed to a bacteriophage suspension for 1 hour and must allow no penetration.[30]

Mass casualty response: World Trade Center, 2001

The attack on the World Trade Center on 11 September 2001 confronted emergency responders with hundreds of seriously injured, burned and dying people at the scene.[31] The EMS chiefs of the New York fire department divided the area into quadrants and set up staging, triage and treatment areas. One EMS officer described assigning triage, treatment and transportation officers, sorting patients by priority with triage tags, and loading the most serious patients first.[32] Before the collapse of the south tower, the department had set up an EMS operations post that divided the site into four zones for triage and treatment.[33]

The NIST investigation identified several problems. The size of the event made it hard for the EMS chiefs to know who was at the scene, some non-fire-department ambulances dispatched themselves, and supervisors could not reach some of them by radio.[34] A transport officer normally makes sure that no single hospital is overwhelmed and that each patient goes to the facility best able to treat the injury.[26] Patient records kept with pencil and paper were lost when the buildings collapsed. Self-dispatched ambulances and people who went to hospital by themselves made tracking harder still.[35]

See also

Notes

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Krakeel (2008), p. 13-145.
  2. ↑ 2.0 2.1 2.2 2.3 Krakeel (2008), p. 13-147.
  3. ↑ 3.0 3.1 3.2 3.3 3.4 Krakeel (2008), p. 13-148.
  4. ↑ 4.0 4.1 4.2 4.3 4.4 4.5 Krakeel (2008), p. 13-157.
  5. ↑ 5.0 5.1 5.2 5.3 Johnson and Price (2008), p. 12-220.
  6. ↑ Krakeel (2008), p. 13-153.
  7. ↑ 7.0 7.1 7.2 7.3 7.4 Krakeel (2008), p. 13-152.
  8. ↑ Granito (2008), p. 12-19.
  9. ↑ 9.0 9.1 Krakeel (2008), p. 13-146.
  10. ↑ 10.0 10.1 10.2 Denlinger (2008), p. 12-58.
  11. ↑ 11.0 11.1 Krakeel (2008), p. 13-149.
  12. ↑ 12.0 12.1 12.2 Hall and Cote (2008), p. 3-27.
  13. ↑ 13.0 13.1 Hall and Cote (2008), p. 3-28.
  14. ↑ 14.0 14.1 Krakeel (2008), p. 13-150.
  15. ↑ Jenaway (2008), p. 12-42.
  16. ↑ 16.0 16.1 16.2 16.3 16.4 Krakeel (2008), p. 13-158.
  17. ↑ Krakeel (2008), pp. 13-158–13-159.
  18. ↑ 18.0 18.1 Krakeel (2008), p. 13-151.
  19. ↑ Krakeel (2008), pp. 13-159–13-160.
  20. ↑ Krakeel (2008), p. 13-160.
  21. ↑ Krakeel (2008), p. 13-155.
  22. ↑ Krakeel (2008), pp. 13-153–13-154.
  23. ↑ Krakeel (2008), p. 13-156.
  24. ↑ Ahrens and Stewart (2008), p. 3-49.
  25. ↑ Gann and Bryner (2008), p. 6-26.
  26. ↑ 26.0 26.1 Lawson and Vettori (2005), p. 66.
  27. ↑ Ahrens and Stewart (2008), p. 3-52.
  28. ↑ Loflin (2008), p. 12-124.
  29. ↑ Loflin (2008), pp. 12-114–12-115.
  30. ↑ Teele (2008), p. 12-156.
  31. ↑ Lawson and Vettori (2005), p. 1.
  32. ↑ Lawson and Vettori (2005), pp. 64–65.
  33. ↑ Lawson and Vettori (2005), p. 119.
  34. ↑ Lawson and Vettori (2005), p. 65.
  35. ↑ Lawson and Vettori (2005), p. 67.

References

  • Ahrens, M., & Stewart, S. (2008). Fire data collection and databases. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-43–3-59). National Fire Protection Association.
  • Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
  • Gann, R. G., & Bryner, N. P. (2008). Combustion products and their effects on life safety. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 6-11–6-34). National Fire Protection Association.
  • Granito, J. A. (2008). Planning for public fire-rescue protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-3–12-22). National Fire Protection Association.
  • Hall, J. R., Jr., & Cote, A. E. (2008). An overview of the fire problem and fire protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-3–3-30). National Fire Protection Association.
  • Jenaway, W. F. (2008). Needs assessment and hazard analysis. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-41–12-50). National Fire Protection Association.
  • Johnson, R., & Price, M. (2008). GIS for fire station locations and response protocols. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-215–12-231). National Fire Protection Association.
  • Krakeel, J. J. (2008). Emergency medical services and the fire department. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-145–13-161). National Fire Protection Association.
  • Lawson, J. R., & Vettori, R. L. (2005). The emergency response operations (NIST NCSTAR 1-8). National Institute of Standards and Technology.
  • Loflin, M. E. (2008). Safety, medical, and health issues and programs. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-107–12-125). National Fire Protection Association.
  • Teele, B. W. (2008). Fire and emergency services protective clothing and protective equipment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-143–12-160). National Fire Protection Association.