File:Fse-fire-safety-management-v2.svg

Fse-fire-safety-management-v2.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Maintenance closes the loop between defects and verified restoration. Based on Australian Building Codes Board (2020), pp. 129–130.

Diagram for the article Fire safety management (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board (2020), pp. 129–130
Alt text: Installation checks lead to functional tests, defect repair, retesting and restored service.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	16:05, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	09:08, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:12, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Upload fse-fire-safety-management-v2.svg: diagram for Fire safety management (level-1 visual plan V2)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Installation checks lead to functional tests, defect repair, retesting and restored service.
Image title	Top strip, example alarm chain: detector, panel and sounder in series, tested as a whole. Flowchart below: installation check, functional test of the whole chain, diagnose defect, repair and retest. If the retest fails, a dashed loop returns to diagnose defect; if it passes, the system reaches restored service, which is recorded in records. There is no path from repair to restored service without a retest.
Width	900
Height	600