File:Fse-sprinkler-system-v3.svg

Fse-sprinkler-system-v3.svg (SVG file, nominally 900 × 600 pixels, file size: 7 KB)

Summary

Many different failures can prevent water reaching the fuel. Based on U.S. Nuclear Regulatory Commission (2005), p. 10-2.

Diagram for the article Sprinkler system (Fire Safety Academy wiki, level 1 Basic).

Source basis: U.S. Nuclear Regulatory Commission (2005), p. 10-2; Fleming (2002), p. 4-73
Alt text: Closed valve, failed pump, obstructed pipe, painted head and excess storage interrupt protection.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	16:05, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	09:05, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:20, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-sprinkler-system-v3.svg: diagram for Sprinkler system (level-1 visual plan V3)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Closed valve, failed pump, obstructed pipe, painted head and excess storage interrupt protection.
Image title	One sprinkler system chain from left to right: a water tank, a pump, a control valve, a riser and a pipe into a room with one head. Red failure markers sit at each point: the tank is empty, the pump has failed, the valve is closed, debris obstructs the riser, the head is painted over, and high storage below the head (a changed hazard) blocks the spray. A note says these are examples, not a complete list.
Width	900
Height	600