File:Fse-smouldering-v2.svg: Difference between revisions

Revision as of 08:50, 2 November 2026

Fuel-bed thickness affects the heat balance for sustained smouldering. Based on Ohlemiller (2002), pp. 2-201–2-205.

Diagram for the article Smouldering (Fire Safety Academy wiki, level 1 Basic).

Source basis: Ohlemiller (2002), pp. 2-201–2-205
Alt text: Thin layer losing heat and thick layer retaining heat around a slow reaction zone.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:47, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:50, 2 November 2026	900 × 600 (8 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	07:23, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Upload fse-smouldering-v2.svg: diagram for Smouldering (level-1 visual plan V2)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Thin layer losing heat and thick layer retaining heat around a slow reaction zone.
Image title	Left: a thin porous fuel layer on a floor; oxygen reaches it easily, but heat leaves the small reaction zone through the top and bottom faster than it is generated, so the zone fades. Right: a thick porous layer; oxygen diffuses slowly through the bed to a deep reaction zone, while most heat stays within the layer, so the glowing zone persists. No critical thickness value is given.
Width	900
Height	600

Revision as of 07:23, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Upload fse-smouldering-v2.svg: diagram for Smouldering (level-1 visual plan V2)	Revision as of 08:50, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Sanne uploaded a new version of File:Fse-smouldering-v2.svg Newer edit →
(No difference)