File:Fse-fire-alarm-system-v3.svg: Difference between revisions

Revision as of 09:02, 2 November 2026

Redundant paths can share a single point of failure. Based on Australian Building Codes Board et al. (2005), p. 1.2-24.

Diagram for the article Fire alarm system (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board et al. (2005), p. 1.2-24; Schifiliti, Meacham, and Custer (2002), pp. 4-1–4-2
Alt text: Two detection and notification paths sharing one power and control dependency.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:59, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	09:02, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:08, 2 November 2026	900 × 600 (3 KB)	Sanne (talk \| contribs)	Upload fse-fire-alarm-system-v3.svg: diagram for Fire alarm system (level-1 visual plan V3)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Two detection and notification paths sharing one power and control dependency.
Image title	Two redundant paths, A and B, each starting from a detector, both pass through one shared dependency (power, control and communication) before reaching the occupants. The shared dependency is marked as a single point of failure, with a failure indication connected to it. A note says the backup helps only if the shared dependency is addressed.
Width	900
Height	600

Revision as of 08:08, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Upload fse-fire-alarm-system-v3.svg: diagram for Fire alarm system (level-1 visual plan V3)		Revision as of 09:02, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Sanne uploaded a new version of File:Fse-fire-alarm-system-v3.svg Newer edit →
(No difference)