File:Fse-passive-fire-protection-v2.svg: Difference between revisions

Revision as of 09:01, 2 November 2026

Summary

Insulation gaps and thickness variation create thermal bridges. Based on National Institute of Standards and Technology (2005), p. iii and Rockett and Milke (2002), p. 1-29.

Diagram for the article Passive fire protection (Fire Safety Academy wiki, level 1 Basic).

Source basis: National Institute of Standards and Technology (2005), p. iii; Rockett and Milke (2002), p. 1-29
Alt text: Uniform insulation beside a gap and thin region forming thermal bridges to a member.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:59, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	09:01, 2 November 2026	900 × 600 (6 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:08, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-passive-fire-protection-v2.svg: diagram for Passive fire protection (level-1 visual plan V2)

You cannot overwrite this file.

File usage

The following page uses this file:

Passive fire protection

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Uniform insulation beside a gap and thin region forming thermal bridges to a member.
Image title	Two insulated steel members heated from below. The upper member has continuous insulation, so the heat is held back along its whole length. The lower member has a gap and a thin region in its insulation; heat passes through these thermal bridges and the member temperature is locally higher. A note says an average thickness can hide local gaps.
Width	900
Height	600

Revision as of 08:08, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Upload fse-passive-fire-protection-v2.svg: diagram for Passive fire protection (level-1 visual plan V2)		Revision as of 09:01, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Sanne uploaded a new version of File:Fse-passive-fire-protection-v2.svg Newer edit →
(No difference)