Skip to content

File:Fse-foam-plastic-insulation-v2.svg: Difference between revisions

From Fire Safety Academy Wiki
Lisa (talk | contribs)
Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
 
Lisa (talk | contribs)
Lisa uploaded a new version of File:Fse-foam-plastic-insulation-v2.svg
(No difference)

Revision as of 08:05, 8 November 2026

Summary

Time to ignition of thermally thick materials against external heat flux, from the critical heat flux and thermal response parameter of each material. The foam curves use the most ignitable values of their ranges. Based on Tewarson (2002), pp. 3-83, 3-87 and 3-88.

Original illustration for Foam plastic insulation.

  • Source basis: Tewarson (2002), pp. 3-83, 3-87–3-88; Janssens (2002), p. 3-41
  • Alt text: Log-scale chart of time to ignition against heat flux: the most ignitable polyurethane foam ignites fastest, then polystyrene foam, then red oak.

Licensing

New drawing by Fire Safety Academy. © Fire Safety Academy.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:05, 8 November 2026Thumbnail for version as of 08:05, 8 November 20261,260 × 735 (32 KB)Lisa (talk | contribs)Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
07:51, 8 November 2026Thumbnail for version as of 07:51, 8 November 20261,260 × 735 (32 KB)Lisa (talk | contribs)Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity

The following page uses this file:

Metadata