FSE wiki: Fact-check: cite rating schedules, insurer services and loss data directly; qualify owner benefits and label derived equations (written by Claude Opus 5.5) |
Add watermarked Fire Safety Academy illustration at the location specified in the visual plan |
||
| Line 12: | Line 12: | ||
== Historical development == | == Historical development == | ||
Cote and Grant (2008) date the contractual concept of insurance as early as 1347, from records in Genoa, Italy. They describe the Great Fire of London of 1666 as the event that spawned the fire insurance industry.<ref name="CoteGrant-1-53" /> The Phoenix Fire Insurance Company, founded after the fire, introduced "fire marks": metal or ceramic plaques on insured buildings that showed the company's private fire brigade which buildings to protect. Over the next 250 years, more than 200 companies used about 80 designs of plaque in the United Kingdom.<ref name="CoteGrant-1-53" /> These insurance brigades fought fires only in properties insured by their own company and had no lifesaving duties. In London they were consolidated in 1833 into the London Fire Engine Establishment, which the Metropolitan Fire Brigade took over in 1865.<ref name="Denlinger-12-52">Denlinger (2008), p. 12-52.</ref> | Cote and Grant (2008) date the contractual concept of insurance as early as 1347, from records in Genoa, Italy. They describe the Great Fire of London of 1666 as the event that spawned the fire insurance industry.<ref name="CoteGrant-1-53" /> The Phoenix Fire Insurance Company, founded after the fire, introduced "fire marks": metal or ceramic plaques on insured buildings that showed the company's private fire brigade which buildings to protect. Over the next 250 years, more than 200 companies used about 80 designs of plaque in the United Kingdom.<ref name="CoteGrant-1-53" /> These insurance brigades fought fires only in properties insured by their own company and had no lifesaving duties. In London they were consolidated in 1833 into the London Fire Engine Establishment, which the Metropolitan Fire Brigade took over in 1865.<ref name="Denlinger-12-52">Denlinger (2008), p. 12-52.</ref> | ||
[[File:fse-fire-insurance-v5.jpg|thumb|upright=1.5|alt=Reconstruction of a historic metal fire-insurance mark with a sun motif fixed to an old brick wall|A fire mark of the type used to identify an insured building.]] | |||
In the United States the order was reversed: insurance evolved from the fire brigades rather than the other way round.<ref name="CoteGrant-1-53" /> Mutual fire societies, formed in Boston from 1718 to salvage the goods of members, remained active for about a century, until fire insurance became generally affordable. By about 1850, insurance interests in nineteen cities had formed salvage corps to reduce water damage at fires.<ref name="Denlinger-12-53">Denlinger (2008), pp. 12-53–12-54.</ref> In 1870, a year before the great Chicago fire, Lloyd's of London stopped writing policies in Chicago because of the haphazard way the city was being built. Other insurers could sell policies only at high rates, and many still suffered great losses when fire spread out of control.<ref name="CoteGrant-1-54">Cote and Grant (2008), p. 1-54.</ref> | In the United States the order was reversed: insurance evolved from the fire brigades rather than the other way round.<ref name="CoteGrant-1-53" /> Mutual fire societies, formed in Boston from 1718 to salvage the goods of members, remained active for about a century, until fire insurance became generally affordable. By about 1850, insurance interests in nineteen cities had formed salvage corps to reduce water damage at fires.<ref name="Denlinger-12-53">Denlinger (2008), pp. 12-53–12-54.</ref> In 1870, a year before the great Chicago fire, Lloyd's of London stopped writing policies in Chicago because of the haphazard way the city was being built. Other insurers could sell policies only at high rates, and many still suffered great losses when fire spread out of control.<ref name="CoteGrant-1-54">Cote and Grant (2008), p. 1-54.</ref> | ||
Revision as of 09:36, 8 November 2026
Fire insurance is a contract by which the owner of a building, its contents or a business transfers the financial consequences of fire to an insurer in exchange for a premium. Risk managers count it among the basic options for handling fire risk, next to avoiding a risky activity, reducing the risk and improving loss control.[1] To be acceptable to an insurer, a risk is rated by actuarial means, and formal fire risk assessment evolved together with the insurance industry in the nineteenth century.[2][3]
The fire insurance industry took shape after the Great Fire of London in 1666.[4] In the United States, the insurance industry produced the first model building code and the grading of towns, and its interest in prevention helped to start the development of standard fire tests.[5][6][7] Premiums depend on the expected loss, on loadings for uncertainty and costs, and on rating schedules that credit construction, occupancy and protection.[8][2] Insurers also offer loss prevention services and are a major source of data on fire losses.[9][10] Insurance does not, however, reduce the chance that a fire occurs: it transfers financial risk only.[11]
Principle of risk transfer
Fire risk combines the probability of a fire and the size of its consequences.[12] When a company judges a risk unacceptable, Snyder (2008) lists six ways of handling it. These are avoiding the risky operation, reducing the risk by design, transferring it by purchasing insurance, financing alternative arrangements such as captives or corporate reserves (self-insurance), improving loss control, and combining these options. He notes that the combined programme is generally cost-effective and reduces the funds needed for insurance and self-insurance.[1] In the same framework, insurance company requirements are one of the organisational goals that shape what a company accepts as a tolerable risk.[1]
The logic of the contract can be seen from the owner's side. An owner who faces a fire with probability in the coming year and a loss in that event has an expected annual loss of . Insurance replaces this uncertain loss with a sure payment, the premium.[8] The insurer is in a different position. With many customers it has many such "bets" going, so its annual loss experience stays in a much narrower range around the expected value than that of a single owner. The range widens again when many customers share a common risk, for example a location in the same hurricane region.[13]
Cover is not limited to the damaged property itself. Loss of profits during the interruption after a fire can be covered by consequential loss insurance, whose premium depends on the period of indemnity. In the United States the more common form is business interruption insurance, which works on similar lines to the British consequential loss policy.[14] A deductible limits the cover to losses large enough for the owner's risk aversion to be strong. For very large fires, insurers spread their own exposure through reinsurance markets, particularly for properties that could suffer more than one very large loss in a short period. An insurer may also set an upper bound on the maximum loss it will cover.[13]
Historical development
Cote and Grant (2008) date the contractual concept of insurance as early as 1347, from records in Genoa, Italy. They describe the Great Fire of London of 1666 as the event that spawned the fire insurance industry.[4] The Phoenix Fire Insurance Company, founded after the fire, introduced "fire marks": metal or ceramic plaques on insured buildings that showed the company's private fire brigade which buildings to protect. Over the next 250 years, more than 200 companies used about 80 designs of plaque in the United Kingdom.[4] These insurance brigades fought fires only in properties insured by their own company and had no lifesaving duties. In London they were consolidated in 1833 into the London Fire Engine Establishment, which the Metropolitan Fire Brigade took over in 1865.[15]

In the United States the order was reversed: insurance evolved from the fire brigades rather than the other way round.[4] Mutual fire societies, formed in Boston from 1718 to salvage the goods of members, remained active for about a century, until fire insurance became generally affordable. By about 1850, insurance interests in nineteen cities had formed salvage corps to reduce water damage at fires.[16] In 1870, a year before the great Chicago fire, Lloyd's of London stopped writing policies in Chicago because of the haphazard way the city was being built. Other insurers could sell policies only at high rates, and many still suffered great losses when fire spread out of control.[17]
The National Board of Fire Underwriters (NBFU), organised in 1866, concluded that adjusting and standardising rates were only temporary solutions. It began to emphasise safe construction, control of fire hazards and better water supplies and fire departments.[18] In 1905 it published a building code, later the National Building Code, which NIST describes as the first US model building code, developed by the fire insurance industry after large city fires.[18][5]
The code also served as a basis for evaluating the building regulations of towns and cities for town grading.[6] Its municipal grading schedule was continued by ISO, whose Fire Suppression Rating Schedule produces the Public Protection Classification.[19] By the time of the Chicago fire, insurers had also begun to see how prevention could limit huge losses. Organisations such as NFPA, ASTM and Underwriters Laboratories then started, around 1900, to develop recommendations and standard fire tests.[7]
Ramachandran (2002b) explains the premium with a simple model. The insurer starts from the risk premium , the expected loss, and adds two loadings. A safety loading covers chance fluctuations of loss beyond the expected value, and a second loading covers the insurer's operating costs, including profits, taxes and administrative expenses.[8][20] An algebraic restatement of this description is:
| Symbol | Description | Unit |
|---|---|---|
| Annual premium paid by the policyholder | currency per year | |
| Probability that the fire occurs in the coming year | – | |
| Loss if the fire occurs | currency | |
| Expected annual loss, the risk premium | currency per year | |
| Safety loading for fluctuations of loss beyond the expected value | currency per year | |
| Loading for operating costs, profits, taxes and administration | currency per year |
The model shows why insurance exists at all. On a pure expected-value basis, an owner should insure only if is less than , and an insurer should offer cover only if is greater than . Both conditions cannot hold at once. The gap is bridged by risk aversion: most owners prefer a sure, somewhat higher payment to the risk of a large loss.[8] The most an owner will pay is the certainty equivalent of the uncertain fire loss, which grows with the owner's degree of risk aversion.[21]
Real losses are not a single value but are skewed. A log-normal distribution of fire loss has been recommended widely for modelling fire insurance claims, and some actuaries have also used the Pareto distribution.[22] Hall and Watts (2008) note that an insurer may worry less about ordinary claims than about a single large loss so big that it cannot cover it.[23]
In practice, premiums come from rating systems. Fire insurance rates are promulgated as class rates, which apply to all properties in a category such as dwellings, and as specific rates. Specific rates come from schedule rating, in which a schedule of charges and credits for construction, occupancy and other features measures the relative fire hazard of an individual property. Schedule rating is typically used for institutions, manufacturing properties and businesses.[2]
Watts (2002) names ISO's Specific Commercial Property Evaluation Schedule as the most commonly used rating schedule in the United States. In general, the tabulated values in such schedules rest on actuarial analysis of fire losses paid by insurers.[2] In that schedule, public fire protection enters through the Public Protection Classification of the community.[24] Many property insurers also use their own proprietary rating systems. These assess the intrinsic hazards of a facility to fire and natural disaster and the specific hazards of its occupancy. The assessment is then adjusted for the quality of the protection systems, the fire water supply, the loss control programmes and the status of earlier recommendations.[25]
Insurers and loss prevention
Cote and Grant (2008) argue that the insurance industry has had a major influence on fire safety policy. Its collective approach to loss is less tolerant than society tends to be on an individual basis. Everyone ultimately pays for other people's losses through higher premiums.[4] Insurers have also gathered evidence on what drives losses. According to Snyder, major property insurance companies have statistically demonstrated that what people do, or fail to do, has the largest effect on the size of a fire or explosion loss.[26] During routine inspections they continue to find fire protection systems of all types out of service, and many large fire losses have been attributed to such impairments.[27]
Industrial property insurers have traditionally recommended management programmes to prevent property damage and business interruption, covering topics such as impairments, hot work, maintenance, training and inspection. Each major industrial insurer typically has guidance documents that can be used together with NFPA standards.[28] In the 2008 handbook, Snyder describes a changing market. Many insurers had reduced or eliminated service functions, others had kept them with reduced staff focused on underwriting, and some had staffed up to sell such services within their range of insurance products. When services are bundled with the policy, their focus may be driven by the insurer's own standards. In the "unbundled" approach, the client buys the services directly from consulting companies, often separately from the insurance cover.[9]
Insurer requirements can shape protection design directly. FM Global, described as one of the world's largest property insurers and risk management organisations, runs Factory Mutual Approvals, and some underwriters require approved fire-resistant hydraulic fluids before they will insure a facility.[29] For foam-water sprinkler systems in industrial occupancies, Scheffey (2002) notes that highly protected risk (HPR) insurance requirements led the NFPA standard to require a higher minimum water application rate. For foam protection of flammable liquid storage, he adds that the criteria of insurers such as Industrial Risk Insurers and Factory Mutual are similar to NFPA requirements but differ in detail.[30] Some insurers also test sprinkler systems in insured properties; such tests verify reliability in order to establish an insurance rate.[31]
Premiums and investment in fire protection
For a property owner, Watts and Chapman (2002) identify likely benefits of fire protection as lower insurance premiums and lower fire damage or business interruption losses that insurance does not cover.[32] Ramachandran states that both the expected loss and the certainty equivalent fall as fire protection improves. Efficient protection therefore lowers the premium an owner needs to pay, and self-insurance of small losses lowers it further.[21]
Sprinklers are the clearest example. After insurance-industry test fires in Los Angeles in the early 1980s, the ISO Personal Lines Committee recommended a 15 % reduction in the homeowner's premium for a residential sprinkler system to NFPA 13D. Madrzykowski and Fleming (2008) note that this credit would not pay for the system over a short period, as it does in many commercial installations, but still call it a significant incentive.[33] For libraries and museums, the reduction in premiums can pay off sprinkler installation costs in a few years.[34]
Engineering economics compares such options by their annual cost. Each investment is spread over its economic life at interest rate with the capital recovery factor.[35] Adding the annual insurance premium , as in the worked example of Watts and Chapman (2002), gives:[36]
| Symbol | Description | Unit |
|---|---|---|
| Equivalent annual cost of the option | currency per year | |
| Investment at the start, for example the cost of a sprinkler system | currency | |
| Interest (discount) rate per year | – | |
| Economic life | year | |
| Annual insurance premium with that option | currency per year |
Watts and Chapman (2002) give a worked example with US dollar values. A partial sprinkler system costs $8,000, lasts 15 years and leaves a premium of $1,000 per year. A full system costs $15,000, lasts 20 years and reduces the premium to $250 per year. At 10 % interest, the capital recovery factors are 0.13147 and 0.11746, so the annual costs are 8,000 × 0.13147 + 1,000 ≈ $2,052 and 15,000 × 0.11746 + 250 ≈ $2,012.[36] The full system is slightly more economical. Because the two results are so close, the authors stress that other criteria, such as uninsured losses, should also be weighed.[36]
The same authors warn that payback periods must be discounted. An analysis of the Beverly Hills Supper Club fire compared estimated annual premium savings of $11,000 with sprinkler installation costs of $42,000 to $68,000. Without discounting, this gave a payback of four to seven years; with future savings discounted at 10 %, the payback became five to eleven years.[36] In a second example, an industrial fire-fighting truck costs $100,000 and saves $60,000 a year in premiums and uninsured losses. After a driver's cost of $10,000 a year and a salvage value of $20,000 after 5 years, it yields a rate of return of about 43 %.[32]
Insurance data in fire statistics and investigation
Insurers are a major source of loss data. Apart from fires and natural disasters, property damage in the United States is tracked only by the insurance industry and, for storms, by the National Weather Service.[10] The ISO estimate of US fire loss includes home insurance claims and adjustments for uninsured or underinsured properties. For 2002, the ISO estimate was $17.6 billion, against $10.3 billion from the NFPA survey of fire departments, and Hall and Twomey describe a modest but growing gap between the two series.[37] Hall and Twomey explain the gap by possible inclusion of indirect losses and overadjustment in the insurance estimate, and by unreported fires that the fire department survey misses.[37] NFPA used the ISO series only for long-term trend analysis, where no other database offers as consistent a method, and notes its considerable uncertainty due to these adjustments.[38]
Practice differs between countries. In Sweden the insurance industry collects the fire data, so fires in uninsured property or fires without a claim are likely to be underreported. In the United Kingdom the government leaves dollar loss information to the insurance industry.[39] Much detailed insurance data are proprietary and confidential.[40] Insurers also investigate fires themselves. They often reconstruct an incident to evaluate a claim or to identify other parties for a possible subrogation action against them, and large insurers may have investigative units for arson and fraud.[41][42]
Insurers in fire safety design and regulation
In performance-based design, insurers appear as stakeholders whose goals may go beyond the law. Puchovsky and Hurley (2008) note that the owner, financers and insurance interests may set goals in excess of building regulations, provided they do not conflict with society's goals.[43] The International Fire Engineering Guidelines (2005), prepared jointly by Australian, Canadian, New Zealand and US bodies, list such non-regulatory objectives of the client or of stakeholders such as the insurer. Examples are limiting structural and contents damage and maintaining business continuity and financial viability.[44] The Australian part of the guidelines adds that designs perceived as higher risk may attract higher premiums and may not be insurable at a reasonable cost.[45] In Australia, the Fire Safety Verification Method Standard 2022 names insurers among the stakeholders that a fire safety design may affect.[46]
Dutch sources also separate public goals from private ones. Introduction to Fire Safety Engineering gives the conditions set by an insurer as one example of rule-based requirements, next to legislation and the rules a large company imposes on its own buildings. Such rules are generic and only partly tailored to the building, its occupants and its surroundings. The book also lists preservation of the building, its contents and business continuity among possible fire safety goals, which form a mix of public and private aims.[47]
For indoor car parks with electric vehicles, the Netherlands Institute for Public Safety notes that the 2012 Building Decree does not address reducing damage. Agreements on acceptable damage can instead be made under private law, for example between the initiator and an insurer. Among possible user rules for charging stations, the same guidance suggests contacting the insurance company to check that charging facilities are allowed under the existing policy.[48][49]
Limits of fire insurance
The purchase of insurance transfers financial risk only and does nothing to the likelihood of a fire. Insuring a fire station, for example, does not keep it from burning down, so insurance is no substitute for effective control measures. For a fire or emergency medical service organisation, Loflin (2008) notes, transferring a risk may be difficult if not impossible; contracting out the operation of helicopters is one example.[11]
Snyder adds that losses to plant property can disrupt profitability regardless of insurance coverage. Few companies facing severe global competition and the high cost of capital could survive a major loss.[26][50] Schmidt (2008) gives an example. In March 2000, a fire at a Philips Electronics plant in Albuquerque stopped the production of computer chips. Ericsson, which had no backup supplier, later reported a loss of at least $400 million in potential revenue before any insurance recovery.[51]
Insurance services and data have their own limits. Most insurance inspection reports contain a disclaimer on the scope of the survey, and Snyder advises checking whether an insurer's recommendation has more cost-effective alternatives before spending money on it.[9] An insurer's exposure may also differ from what it believes if its evaluation of probabilities and consequences is deficient or outdated.[13] The practices and values in this article describe mainly US practice as reported between 2002 and 2008, with some Australian, British and Dutch examples, and they are not a description of insurance markets in general.
See also
Notes
- ↑ 1.0 1.1 1.2 Snyder (2008), p. 12-179.
- ↑ 2.0 2.1 2.2 2.3 Watts (2002), pp. 5-126–5-127.
- ↑ Watts and Hall (2002), p. 5-4.
- ↑ 4.0 4.1 4.2 4.3 4.4 Cote and Grant (2008), p. 1-53.
- ↑ 5.0 5.1 Lew et al. (2005), p. 37.
- ↑ 6.0 6.1 Cote and Grant (2008), p. 1-68.
- ↑ 7.0 7.1 Hirschler (2008a), p. 6-36.
- ↑ 8.0 8.1 8.2 8.3 Ramachandran (2002b), pp. 5-87–5-88.
- ↑ 9.0 9.1 9.2 Snyder (2008), p. 12-182.
- ↑ 10.0 10.1 Hall and Twomey (2008), p. 1-5.
- ↑ 11.0 11.1 Loflin (2008), p. 12-119.
- ↑ Snyder (2008), p. 12-178.
- ↑ 13.0 13.1 13.2 Ramachandran (2002b), p. 5-88.
- ↑ Ramachandran (2002b), p. 5-81.
- ↑ Denlinger (2008), p. 12-52.
- ↑ Denlinger (2008), pp. 12-53–12-54.
- ↑ Cote and Grant (2008), p. 1-54.
- ↑ 18.0 18.1 Cote and Grant (2008), p. 1-55.
- ↑ Granito (2008), p. 12-15.
- ↑ Ramachandran (2002b), p. 5-84.
- ↑ 21.0 21.1 Ramachandran (2002b), p. 5-91.
- ↑ Ramachandran (2002a), p. 5-105.
- ↑ Hall and Watts (2008), p. 3-137.
- ↑ Granito (2008), p. 12-16.
- ↑ Snyder (2008), p. 12-191.
- ↑ 26.0 26.1 Snyder (2008), p. 12-180.
- ↑ Snyder (2008), p. 12-188.
- ↑ Snyder (2008), p. 12-183.
- ↑ Schacht (2008), p. 8-115.
- ↑ Scheffey (2002), pp. 4-112–4-113.
- ↑ Hague (2008a), p. 16-206.
- ↑ 32.0 32.1 Watts and Chapman (2002), p. 5-99.
- ↑ Madrzykowski and Fleming (2008), p. 16-105.
- ↑ McDaniel (2008), p. 20-192.
- ↑ Watts and Chapman (2002), p. 5-96.
- ↑ 36.0 36.1 36.2 36.3 Watts and Chapman (2002), p. 5-98.
- ↑ 37.0 37.1 Hall and Twomey (2008), pp. 1-7–1-8.
- ↑ Hall and Cote (2008), p. 3-6.
- ↑ Ahrens and Stewart (2008), p. 3-58.
- ↑ Hall and Ahrens (2002), p. 5-70.
- ↑ Custer and Sheppard (2008), p. 3-32.
- ↑ Custer and Sheppard (2008), p. 3-39.
- ↑ Puchovsky and Hurley (2008), p. 3-175.
- ↑ National Research Council of Canada et al. (2005), p. 1.2-7.
- ↑ National Research Council of Canada et al. (2005), p. 0.3-3 (Part 0, Australia).
- ↑ Australian Building Codes Board (2022), p. 7.
- ↑ Van Rossum (2027), §1.
- ↑ Van der Graaf et al. (2021/2023), p. 16.
- ↑ Van der Graaf et al. (2021/2023), p. 41.
- ↑ Snyder (2008), p. 12-181.
- ↑ Schmidt (2008), p. 1-150.
References
- Ahrens, M., & Stewart, S. (2008). Fire data collection and databases. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-43–3-59). National Fire Protection Association.
- Australian Building Codes Board. (2022). Fire Safety Verification Method Standard 2022.
- Cote, A. E., & Grant, C. C. (2008). Codes and standards for the built environment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-51–1-71). National Fire Protection Association.
- Custer, R. L. P., & Sheppard, D. T. (2008). Fire loss investigation. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-31–3-41). National Fire Protection Association.
- Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
- Granito, J. A. (2008). Planning for public fire-rescue protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-3–12-22). National Fire Protection Association.
- Hague, D. R. (2008a). Care and maintenance of water-based extinguishing systems. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 16-205–16-222). National Fire Protection Association.
- Hall, J. R., Jr., & Ahrens, M. J. (2002). Data for engineering analysis. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-65–5-78). National Fire Protection Association; Society of Fire Protection Engineers.
- Hall, J. R., Jr., & Cote, A. E. (2008). An overview of the fire problem and fire protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-3–3-30). National Fire Protection Association.
- Hall, J. R., Jr., & Twomey, E. R. (2008). Challenges to safety in the built environment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-3–1-29). National Fire Protection Association.
- Hall, J. R., Jr., & Watts, J. M., Jr. (2008). Fire risk analysis. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-135–3-143). National Fire Protection Association.
- Hirschler, M. M. (2008a). Concepts and protocols of fire testing. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 6-35–6-60). National Fire Protection Association.
- Lew, H. S., Bukowski, R. W., & Carino, N. J. (2005). Design, construction, and maintenance of structural and life safety systems (NIST NCSTAR 1-1). National Institute of Standards and Technology.
- Loflin, M. E. (2008). Safety, medical, and health issues and programs. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-107–12-125). National Fire Protection Association.
- Madrzykowski, D., & Fleming, R. P. (2008). Residential sprinkler systems. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 16-91–16-107). National Fire Protection Association.
- McDaniel, D. L. (2008). Library and museum collections. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 20-179–20-202). National Fire Protection Association.
- National Research Council of Canada, International Code Council, Department of Building and Housing, & Australian Building Codes Board. (2005). International fire engineering guidelines (2005 ed.). Australian Building Codes Board.
- Puchovsky, M. T., & Hurley, M. J. (2008). Performance-Based codes and standards for fire safety. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-167–3-181). National Fire Protection Association.
- Ramachandran, G. (2002a). Extreme value theory. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-105–5-111). National Fire Protection Association; Society of Fire Protection Engineers.
- Ramachandran, G. (2002b). Measuring fire consequences in economic terms (J. R. Hall Jr., Rev.). In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-79–5-92). National Fire Protection Association; Society of Fire Protection Engineers.
- Schacht, P. K. (2008). Fluid power systems. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 8-113–8-116). National Fire Protection Association.
- Scheffey, J. L. (2002). Foam agents and AFFF system design considerations. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 4-88–4-122). National Fire Protection Association; Society of Fire Protection Engineers.
- Schmidt, D. L. (2008). Emergency management and business continuity. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-137–1-156). National Fire Protection Association.
- Snyder, M. (2008). Industrial fire loss prevention. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-177–12-198). National Fire Protection Association.
- Van der Graaf, J., Hessels, T., & Rosmuller, N. (2023). Fire safety of indoor car parks accommodating electrically powered vehicles. Nederlands Instituut Publieke Veiligheid. (Original work published 2021)
- Van Rossum, E. (2027). Introduction to Fire Safety Engineering. Fire Safety Academy.
- Watts, J. M., Jr. (2002). Fire risk indexing. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-125–5-142). National Fire Protection Association; Society of Fire Protection Engineers.
- Watts, J. M., Jr., & Chapman, R. E. (2002). Engineering economics. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-93–5-104). National Fire Protection Association; Society of Fire Protection Engineers.
- Watts, J. M., Jr., & Hall, J. R., Jr. (2002). Introduction to fire risk analysis. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., & J. M. Watts Jr. (Eds.), SFPE handbook of fire protection engineering (3rd ed., pp. 5-1–5-7). National Fire Protection Association; Society of Fire Protection Engineers.