Skip to content
From Fire Safety Academy Wiki
Lisa (talk | contribs)
New FSE wiki article: Aerial apparatus (written by Claude Opus 5.5)
 
Lisa (talk | contribs)
FSE wiki: Fact-check: qualify aerial guidance, source pages, NZ access route and visual scope (written by Claude Opus 5.5)
Line 1: Line 1:
'''Aerial apparatus''' are [[fire apparatus]] fitted with a power-operated aerial device, such as an aerial ladder or an elevating platform. The device gives fire fighters access to upper floors and roofs and a high position for water streams in [[firefighting]] and rescue. In the United States, NFPA 1901 requires the device to be self-supporting and to reach an elevation of at least 15.3 m (50 ft), as described by Tutterow (2008).<ref name="Tutterow-12-268">Tutterow (2008), p. 12-268.</ref> The main types are the aerial ladder, the elevating platform, the water tower and the quint, which combines an aerial device with a pump, water tank and hose.<ref name="Tutterow-12-269">Tutterow (2008), p. 12-269.</ref><ref name="Tutterow-12-277">Tutterow (2008), p. 12-277.</ref> Aerial apparatus are usually operated by ladder or truck companies, whose work at a fire includes rescue, forcible entry, ventilation, salvage and overhaul.<ref name="Denlinger-12-63-64">Denlinger (2008), pp. 12-63–12-64.</ref>
'''Aerial apparatus''' are [[fire apparatus]] fitted with a power-operated aerial device, such as an aerial ladder or an elevating platform. The device gives fire fighters access to upper floors and roofs and a high position for water streams in [[firefighting]] and rescue. In the United States, NFPA 1901 requires the device to be self-supporting and to reach an elevation of at least 15.3 m (50 ft), as described by Tutterow (2008).<ref name="Tutterow-12-268">Tutterow (2008), p. 12-268.</ref> The main types are the aerial ladder, the elevating platform, the water tower and the quint, which combines an aerial device with a pump, water tank and hose.<ref name="Tutterow-12-269">Tutterow (2008), p. 12-269.</ref><ref name="Tutterow-12-277">Tutterow (2008), p. 12-277.</ref> Aerial apparatus are usually operated by ladder or truck companies, whose work at a fire includes rescue, forcible entry, ventilation, salvage and overhaul.<ref name="Denlinger-12-63-64">Denlinger (2008), pp. 12-63–12-64.</ref>


An aerial device saves labour: one fire fighter can set it up, whereas three are needed to raise a 10.7 m extension ladder.<ref name="Tutterow-12-275">Tutterow (2008), p. 12-275.</ref> Its usefulness is limited by reach and by access. Under optimum conditions aerial equipment only reaches the equivalent of the seventh floor, and it is useless if the vehicle cannot be placed close enough to the building.<ref name="Comly-11-40">Comly (2008), p. 11-40.</ref><ref name="Comly-11-43">Comly (2008), p. 11-43.</ref> The requirements given here are those of US standards as described in 2008.
An aerial device can save labour when strategically positioned: one fire fighter can set it up, whereas three are needed to raise a 10.7 m extension ladder.<ref name="Tutterow-12-275">Tutterow (2008), p. 12-275.</ref> Its usefulness is limited by reach and by access. Under optimum conditions aerial equipment only reaches the equivalent of the seventh floor, and it is useless if the vehicle cannot be placed close enough to the building.<ref name="Comly-11-40">Comly (2008), p. 11-40.</ref><ref name="Comly-11-43">Comly (2008), p. 11-43.</ref> The requirements given here are those of US standards as described in 2008.


== Types of aerial devices ==
== Types of aerial devices ==
Line 17: Line 17:
Klaene and Sanders (2008) describe truck company work as assisting engine companies by gaining entry, laddering the building, ventilating and evacuating occupants. They add that even departments without an aerial apparatus should divide crew assignments into engine and truck tasks.<ref name="KS-13-7">Klaene and Sanders (2008), p. 13-7.</ref> About one-third of the work at an average fire falls into this rescue and ladder-company category.<ref name="Tutterow-12-267">Tutterow (2008), p. 12-267.</ref>
Klaene and Sanders (2008) describe truck company work as assisting engine companies by gaining entry, laddering the building, ventilating and evacuating occupants. They add that even departments without an aerial apparatus should divide crew assignments into engine and truck tasks.<ref name="KS-13-7">Klaene and Sanders (2008), p. 13-7.</ref> About one-third of the work at an average fire falls into this rescue and ladder-company category.<ref name="Tutterow-12-267">Tutterow (2008), p. 12-267.</ref>


How many ladder companies a community has depends on its buildings. Denlinger (2008) notes that a densely built city may have one ladder company for every two or three engine companies. In suburban areas with large response areas the quint is particularly common. In rural areas, ladder-company work is often assigned to engine companies carrying extra equipment.<ref name="Denlinger-12-64">Denlinger (2008), p. 12-64.</ref> Granito (2008) lists at least one ladder truck, or combination apparatus with equivalent capabilities, in the typical initial attack on low- and medium-hazard occupancies, and two for high-hazard occupancies.<ref name="Granito-12-12">Granito (2008), p. 12-12.</ref> The grading schedule of the Insurance Services Office checks whether the built-up area has a ladder-service company within 4 km (2.5 mi).<ref name="Granito-12-17">Granito (2008), p. 12-17.</ref>
How many ladder companies a community has depends on its buildings. Denlinger (2008) notes that a densely built city may have one ladder company for every two or three engine companies. In suburban areas with large response areas the quint is particularly common. In rural areas, ladder-company work is often assigned to engine companies carrying extra equipment.<ref name="Denlinger-12-64">Denlinger (2008), p. 12-64.</ref> Granito (2008) lists at least one ladder truck, or combination apparatus with equivalent capabilities, in the typical initial attack on low- and medium-hazard occupancies, and two for high-hazard occupancies.<ref name="Granito-12-12">Granito (2008), p. 12-12.</ref> In Granito's 2008 US account, the Insurance Services Office grading schedule checked whether the built-up area had a ladder-service company within 4 km (2.5 mi).<ref name="Granito-12-17">Granito (2008), p. 12-17.</ref>


Staffing is often a constraint. In small cities with low population density, ladder trucks may respond with only two persons on duty, which Denlinger (2008) says should be reinforced promptly by off-shift or call personnel. Many departments had a policy of not operating engine or ladder companies with fewer than four fire fighters, including an officer.<ref name="Denlinger-12-72">Denlinger (2008), p. 12-72.</ref><ref name="Denlinger-12-73">Denlinger (2008), p. 12-73.</ref> The wider question of crew size is treated under [[fire company staffing]]. Tutterow (2008) warns that departments must understand the staffing needs of a multifunctional apparatus such as a quint.<ref name="Tutterow-12-269" /> Specialised courses are also needed when a department brings a new aerial device into service.<ref name="Laughlin-12-167">Laughlin (2008), p. 12-167.</ref>
Staffing is often a constraint. In small cities with low population density, ladder trucks may respond with only two persons on duty, which Denlinger (2008) says should be reinforced promptly by off-shift or call personnel.<ref name="Denlinger-12-72">Denlinger (2008), p. 12-72.</ref> Many departments had a policy of not operating engine or ladder companies with fewer than four fire fighters, including an officer.<ref name="Denlinger-12-73">Denlinger (2008), p. 12-73.</ref> The wider question of crew size is treated under [[fire company staffing]]. Tutterow (2008) warns that departments must understand the staffing needs of a multifunctional apparatus such as a quint.<ref name="Tutterow-12-269" /> Laughlin (2008) gives training for a newly introduced aerial device as an example of a specialised course.<ref name="Laughlin-12-167">Laughlin (2008), p. 12-167.</ref>


== Ladder and platform requirements ==
== Ladder and platform requirements ==
Line 28: Line 28:
Elevating platforms were available with booms from about 23 m to more than 61 m (75 to 200 ft). Their rated height is measured from the top rail of the platform to the ground.<ref name="Tutterow-12-277" /> An articulated boom reaches furthest horizontally at about half its maximum elevation, while a telescopic boom of the same length generally reaches somewhat further at higher and lower elevations.<ref name="Tutterow-12-277" />
Elevating platforms were available with booms from about 23 m to more than 61 m (75 to 200 ft). Their rated height is measured from the top rail of the platform to the ground.<ref name="Tutterow-12-277" /> An articulated boom reaches furthest horizontally at about half its maximum elevation, while a telescopic boom of the same length generally reaches somewhat further at higher and lower elevations.<ref name="Tutterow-12-277" />


The platform must have a floor of at least 1.3 m² and a continuous guardrail between 1069 and 1118 mm high. It also needs a heat-reflective shield and a water curtain flowing at least 284 L/min (75 gpm) beneath it for protection.<ref name="Tutterow-12-277" /> The platform should carry at least 340 kg (750 lb) in all positions without water. Units of 34 m (110 ft) or less should reach full elevation and extension and rotate 90 degrees within 150 seconds.<ref name="Tutterow-12-277" />
The platform must have a floor of at least 1.3 m² and a continuous guardrail between 1069 and 1118 mm high. It also needs a heat-reflective shield and a water curtain flowing at least 284 L/min (75 gpm) beneath it for protection.<ref name="Tutterow-12-277" /> The platform should carry at least 340 kg (750 lb) in all positions without the water system charged. Units of 34 m (110 ft) or less should reach full elevation and extension and rotate 90 degrees within 150 seconds.<ref name="Tutterow-12-277" />


Tutterow (2008) calls the elevating platform clearly the best choice of aerial device for fire fighter safety. It offers protection not available on straight ladders if crews are unexpectedly enveloped in the products of combustion, space for tools and hose, and a safe working area for rescues.<ref name="Tutterow-12-276" /> He expected platforms to matter more for rescuing people with limited mobility, as the population was ageing and high-rise residential buildings were becoming more numerous.<ref name="Tutterow-12-276" /> Ground-level controls must be able to override the platform controls, so that an operator on the ground can move the platform away from danger.<ref name="Tutterow-12-277" /> Both ladders and platforms have many interlocks, and departments must understand them and train personnel in their function.<ref name="Tutterow-12-276" /><ref name="Tutterow-12-277" />
Tutterow (2008) calls the elevating platform clearly the best choice of aerial device for fire fighter safety. It offers protection not available on straight ladders if crews are unexpectedly enveloped in the products of combustion, space for tools and hose, and a safe working area for rescues.<ref name="Tutterow-12-276" /> He expected platforms to matter more for rescuing people with limited mobility, as the population was ageing and high-rise residential buildings were becoming more numerous.<ref name="Tutterow-12-276" /> Ground-level controls must be able to override the platform controls, so that an operator on the ground can move the platform away from danger.<ref name="Tutterow-12-277" /> Both ladders and platforms have many interlocks, and departments must understand them and train personnel in their function.<ref name="Tutterow-12-276" /><ref name="Tutterow-12-277" />
Line 35: Line 35:
An aerial device can carry a large water stream, or [[master stream]], to a high point. Where an aerial ladder has a fixed waterway, it should be able to flow 3785 L/min (1000 gpm) at 690 kPa (100 psi) nozzle pressure. The monitor should work through a 45-degree side-to-side range and a 135-degree arc downward from the line of the ladder, and it is often remotely controlled.<ref name="Tutterow-12-276" /> Without a fixed waterway, a detachable ladder pipe is supplied by 76 mm hose run up the ladder, and 2271 L/min (600 gpm) is the practical maximum in normal operations.<ref name="Tutterow-12-276" /> Platform turrets must turn at least 45 degrees up, down and to each side and operate safely at 3785 L/min and 690 kPa in any position.<ref name="Tutterow-12-277" />
An aerial device can carry a large water stream, or [[master stream]], to a high point. Where an aerial ladder has a fixed waterway, it should be able to flow 3785 L/min (1000 gpm) at 690 kPa (100 psi) nozzle pressure. The monitor should work through a 45-degree side-to-side range and a 135-degree arc downward from the line of the ladder, and it is often remotely controlled.<ref name="Tutterow-12-276" /> Without a fixed waterway, a detachable ladder pipe is supplied by 76 mm hose run up the ladder, and 2271 L/min (600 gpm) is the practical maximum in normal operations.<ref name="Tutterow-12-276" /> Platform turrets must turn at least 45 degrees up, down and to each side and operate safely at 3785 L/min and 690 kPa in any position.<ref name="Tutterow-12-277" />


The force of the stream acts back on the device. Wieder (2008) explains that the reaction of master streams from aerial ladders or platforms creates a tremendous amount of stress, and that lever effects grow as the device is extended. Operating beyond the design limits can threaten the stability of the whole structure.<ref name="Wieder-13-34">Wieder (2008), p. 13-34.</ref> A sudden loss of pressure, when a hose bursts or a pump stops, can cause a whipping action that damages the device.<ref name="Wieder-13-34" /> Wieder considers tables of specific reactions impractical because so many forces act on an aerial device in service. The nozzle reaction itself can be estimated from the flow and nozzle pressure:<ref name="Wieder-13-33">Wieder (2008), p. 13-33.</ref><ref name="Wieder-13-34" />
The force of the stream acts back on the device. Wieder (2008) explains that the reaction of master streams from aerial ladders or platforms creates a tremendous amount of stress, and that lever effects grow as the device is extended. Operating beyond the design limits can threaten the stability of the whole structure.<ref name="Wieder-13-34">Wieder (2008), p. 13-34.</ref> A sudden loss of pressure, when a hose bursts or a pump stops, can cause a whipping action that damages the device.<ref name="Wieder-13-34" /> Wieder considers tables of specific reactions impractical because so many forces act on an aerial device in service.<ref name="Wieder-13-34" /> The nozzle reaction itself can be estimated from the flow and nozzle pressure:<ref name="Wieder-13-33">Wieder (2008), p. 13-33.</ref>


<math display="block">\mathit{NR} = 0.0226\,Q\,\sqrt{\mathit{NP}}</math>
<math display="block">\mathit{NR} = 0.0226\,Q\,\sqrt{\mathit{NP}}</math>
Line 49: Line 49:
|}
|}


Wieder's own example is a spray nozzle of 946 L/min at 690 kPa, which gives a reaction of about 562 N.<ref name="Wieder-13-33" /><ref name="Wieder-13-34" /> As an illustration, a fixed waterway at its rated flow of 3785 L/min and 690 kPa would give 0.0226 × 3785 × √690, or about 2250 N (about 505 lbf). Wieder notes that the lever effects of such forces grow as the device is extended.
Wieder's own example is a spray nozzle of 946 L/min at 690 kPa, which gives a reaction of about 562 N.<ref name="Wieder-13-34" /> As an illustration, a fixed waterway at its rated flow of 3785 L/min and 690 kPa would give 0.0226 × 3785 × √690, or about 2250 N (about 505 lbf). Wieder notes that the lever effects of such forces grow as the device is extended.


Wieder (2008) sets out operating rules that follow from these forces. A detachable ladder pipe on a light-duty aerial ladder should be operated in line with the main beams and should not travel more than 15 degrees sideways. The stream is turned by rotating the turntable instead.<ref name="Wieder-13-34" /> The fly section should not be raised or lowered while a ladder pipe is discharging, and the vehicle must never be moved with the stream flowing. Most aerial ladders are designed for a single 76 or 89 mm supply hose, and a larger hose could overload the ladder.<ref name="Wieder-13-34" /> Remote-controlled nozzles on piped waterways and platforms typically do not allow the stream to be aimed outside the safe operating area.<ref name="Wieder-13-34" />
Wieder (2008) sets out operating rules that follow from these forces. A detachable ladder pipe on a light-duty aerial ladder should be operated in line with the main beams and should not travel more than 15 degrees sideways. The stream is turned by rotating the turntable instead.<ref name="Wieder-13-34" /> The fly section should not be raised or lowered while a ladder pipe is discharging, and the vehicle must never be moved with the stream flowing. Most aerial ladders are designed for a single 76 or 89 mm supply hose, and a larger hose could overload the ladder.<ref name="Wieder-13-34" /> Remote-controlled nozzles on piped waterways and platforms typically do not allow the stream to be aimed outside the safe operating area.<ref name="Wieder-13-34" />
Line 60: Line 60:
Comly (2008) states that access lanes must carry the heaviest apparatus expected and let it get close enough to all sides for rescue and suppression. As described by him, NFPA 1, NFPA 1141 and NFPA 1144 require at least 6.11 m (20 ft) width and 4.11 m (13.5 ft) vertical clearance.<ref name="Comly-11-40" /> Widening paved surfaces to 26 ft (about 7.9 m) for aerial apparatus is recommended, excluding any parking. Commonly used turning radii are 6.7 m (22 ft) inside and 15 m (50 ft) outside.<ref name="Comly-11-41">Comly (2008), p. 11-41.</ref> If obstructions or topography keep apparatus too far away, aerial ladders, platforms and water towers are useless. Where [[fire service access]] is limited or absent, Comly recommends complete automatic sprinkler protection.<ref name="Comly-11-43" />
Comly (2008) states that access lanes must carry the heaviest apparatus expected and let it get close enough to all sides for rescue and suppression. As described by him, NFPA 1, NFPA 1141 and NFPA 1144 require at least 6.11 m (20 ft) width and 4.11 m (13.5 ft) vertical clearance.<ref name="Comly-11-40" /> Widening paved surfaces to 26 ft (about 7.9 m) for aerial apparatus is recommended, excluding any parking. Commonly used turning radii are 6.7 m (22 ft) inside and 15 m (50 ft) outside.<ref name="Comly-11-41">Comly (2008), p. 11-41.</ref> If obstructions or topography keep apparatus too far away, aerial ladders, platforms and water towers are useless. Where [[fire service access]] is limited or absent, Comly recommends complete automatic sprinkler protection.<ref name="Comly-11-43" />


Pre-incident planning takes these limits into account. Norman (2008) notes that building height affects the need for aerial devices, and that plans can call for them where they are not part of the routine response.<ref name="Norman-12-304">Norman (2008), p. 12-304.</ref> Where a construction trench separates the apparatus from the building, the aerial apparatus should enter the block, since it can reach over the trench.<ref name="Norman-12-306">Norman (2008), p. 12-306.</ref> Tutterow (2008) adds that manually raised extension ladders longer than 12 m (40 ft) are generally not needed where aerials provide access, unless congestion prevents placing them.<ref name="Tutterow-12-284">Tutterow (2008), p. 12-284.</ref> Training towers should be tall enough for the tallest aerial expected in the community over the next 10 to 20 years, with room for aerials on all sides.<ref name="AL-12-248">Acomb and LeBoeuf (2008), p. 12-248.</ref><ref name="AL-12-249">Acomb and LeBoeuf (2008), p. 12-249.</ref> In New Zealand, C/VM2 (second edition, 2025) requires access for fire service vehicles to a hard-standing within 20 m of the firefighter access and system inlets.<ref name="MBIE-53">Ministry of Business, Innovation and Employment (2025b), p. 53.</ref>
Pre-incident planning takes these limits into account. Norman (2008) notes that building height affects the need for aerial devices, and that plans can call for them where they are not part of the routine response.<ref name="Norman-12-304">Norman (2008), p. 12-304.</ref> Where a construction trench separates the apparatus from the building, the aerial apparatus should enter the block, since it can reach over the trench.<ref name="Norman-12-306">Norman (2008), p. 12-306.</ref> Tutterow (2008) adds that manually raised extension ladders longer than 12 m (40 ft) are generally not needed where aerials provide access, unless congestion prevents placing them.<ref name="Tutterow-12-284">Tutterow (2008), p. 12-284.</ref> Training towers should be tall enough for the tallest aerial expected in the community over the next 10 to 20 years, with room for aerials on all sides.<ref name="AL-12-248">Acomb and LeBoeuf (2008), p. 12-248.</ref><ref name="AL-12-249">Acomb and LeBoeuf (2008), p. 12-249.</ref> In New Zealand, C/VM2 (second edition, 2025) requires vehicle access to a hard-standing with an unobstructed path to within 20 m of the firefighter entrance and any installed sprinkler or hydrant system inlets.<ref name="MBIE-53">Ministry of Business, Innovation and Employment (2025b), p. 53.</ref>


== Testing and maintenance ==
== Testing and maintenance ==
Line 68: Line 68:


== Limits of the guidance ==
== Limits of the guidance ==
The dimensions and loads above are NFPA 1901 and NFPA 1911 requirements as described in 2008, and many departments chose heavier ratings than the minimum.<ref name="Tutterow-12-276" /> Reach values, such as the seventh floor or 30 m, are approximate and depend on where the vehicle can be placed.<ref name="Comly-11-40" /><ref name="OHagan-LV-72" /> The illustrative reaction force uses Wieder's general nozzle formula and leaves out the lever and centre-of-gravity effects that he describes as too variable to tabulate.<ref name="Wieder-13-34" />
The aerial-device dimensions and loads in the ladder and platform sections derive from NFPA 1901 as described by Tutterow (2008).<ref name="Tutterow-12-276" /> The in-service test intervals come from his account of NFPA 1911.<ref name="Tutterow-12-283" /> Many departments chose heavier ladder ratings than the minimum.<ref name="Tutterow-12-276" /> Reach values, such as the seventh floor or 30 m, are approximate and depend on where the vehicle can be placed.<ref name="Comly-11-40" /><ref name="OHagan-LV-72" /> The illustrative reaction force uses Wieder's general nozzle formula and leaves out the lever and centre-of-gravity effects that he describes as too variable to tabulate.<ref name="Wieder-13-34" />


The sources describe US apparatus, companies and standards. The New Zealand requirement concerns access for fire service vehicles in general and does not set aerial dimensions.<ref name="MBIE-53" /> Quints and other combinations offer flexibility, but Tutterow (2008) notes that positioning them for several purposes can occasionally be cumbersome, and that the whole vehicle is lost when one feature needs repair.<ref name="Tutterow-12-269" />
The apparatus and company details above mostly describe US practice in the cited 2008 handbook. The New Zealand requirement concerns access for fire service vehicles in general and does not set aerial dimensions.<ref name="MBIE-53" /> Quints and other combinations offer flexibility, but Tutterow (2008) notes that positioning them for several purposes can occasionally be cumbersome, and that the whole vehicle is lost when one feature needs repair.<ref name="Tutterow-12-269" />


== See also ==
== See also ==

Revision as of 01:06, 8 November 2026

Aerial apparatus are fire apparatus fitted with a power-operated aerial device, such as an aerial ladder or an elevating platform. The device gives fire fighters access to upper floors and roofs and a high position for water streams in firefighting and rescue. In the United States, NFPA 1901 requires the device to be self-supporting and to reach an elevation of at least 15.3 m (50 ft), as described by Tutterow (2008).[1] The main types are the aerial ladder, the elevating platform, the water tower and the quint, which combines an aerial device with a pump, water tank and hose.[2][3] Aerial apparatus are usually operated by ladder or truck companies, whose work at a fire includes rescue, forcible entry, ventilation, salvage and overhaul.[4]

An aerial device can save labour when strategically positioned: one fire fighter can set it up, whereas three are needed to raise a 10.7 m extension ladder.[5] Its usefulness is limited by reach and by access. Under optimum conditions aerial equipment only reaches the equivalent of the seventh floor, and it is useless if the vehicle cannot be placed close enough to the building.[6][7] The requirements given here are those of US standards as described in 2008.

Types of aerial devices

Aerial ladders have been used by fire departments for more than a century to reach upper floors and roofs.[5] They appeared in European and US cities in the late 1800s, together with water towers, as buildings of about 15 storeys became part of the cityscape.[8] The first aerials were raised by hand, before spring-assisted and air-assisted hoists were introduced. Aerial ladders described in 2008 were of steel or aluminium truss construction, with hydraulic hoists and controls, mounted on a turntable that can rotate a full 360 degrees in either direction.[5]

Aerial ladders are mounted on a straight chassis or on a tractor-drawn chassis, known as a tiller. Tillers manoeuvre better in narrow streets but need two fire fighters to drive them, and they were less popular in 2008 than before.[9] On a rear-mount aerial the turntable sits over the rear wheels and the bedded ladder points forward, which shortens the vehicle. A mid-mount aerial gives a lower overall height, which matters for older fire stations with low doors and for low overpasses.[9] Many aerial units also carry a pump, water tank and hose bed, although this is not common on tillers.[9]

On an elevating platform, fire fighters work from a platform mounted on a boom. The boom may be articulated, telescopic, or both articulated and telescopic.[9] Water towers followed the success of elevating platforms on the fireground in the 1960s. They are designed to discharge at least 3785 L/min (1000 gpm) at 690 kPa nozzle pressure, typically from heights of 15.2 to 22.9 m (50 to 75 ft), and are usually installed on pumpers.[3]

A quint carries a pump, a water tank, hose, an aerial ladder or platform with a waterway, and ground ladders. Tutterow (2008) notes that quints had become popular, but that efficiency tends to fall when one vehicle performs too many functions.[2] Some departments also use aerial ladder tenders, which carry support equipment but have no aerial device, water or hose.[1] Between 1997 and 1999, US municipal fire departments reported 6300 aerial or ladder apparatus in use.[2]

Ladder companies and their work

Engine and ladder companies are the most common types of fire company. The apparatus of the ladder company, or truck company, is an aerial ladder or elevating platform that provides access above ground level or to rooftops and can direct elevated master streams onto fires.[10] Ladder trucks also carry ground ladders and hand and power tools. On the fireground their crews perform search and rescue, forcible entry, ventilation, salvage and overhaul, and use ladders to rescue people trapped above ground level.[4]

Klaene and Sanders (2008) describe truck company work as assisting engine companies by gaining entry, laddering the building, ventilating and evacuating occupants. They add that even departments without an aerial apparatus should divide crew assignments into engine and truck tasks.[11] About one-third of the work at an average fire falls into this rescue and ladder-company category.[12]

How many ladder companies a community has depends on its buildings. Denlinger (2008) notes that a densely built city may have one ladder company for every two or three engine companies. In suburban areas with large response areas the quint is particularly common. In rural areas, ladder-company work is often assigned to engine companies carrying extra equipment.[13] Granito (2008) lists at least one ladder truck, or combination apparatus with equivalent capabilities, in the typical initial attack on low- and medium-hazard occupancies, and two for high-hazard occupancies.[14] In Granito's 2008 US account, the Insurance Services Office grading schedule checked whether the built-up area had a ladder-service company within 4 km (2.5 mi).[15]

Staffing is often a constraint. In small cities with low population density, ladder trucks may respond with only two persons on duty, which Denlinger (2008) says should be reinforced promptly by off-shift or call personnel.[16] Many departments had a policy of not operating engine or ladder companies with fewer than four fire fighters, including an officer.[17] The wider question of crew size is treated under fire company staffing. Tutterow (2008) warns that departments must understand the staffing needs of a multifunctional apparatus such as a quint.[2] Laughlin (2008) gives training for a newly introduced aerial device as an example of a specialised course.[18]

Ladder and platform requirements

Common aerial ladder lengths in 2008 ranged from 22.8 m (75 ft) to 41.1 m (135 ft). The rated height is measured with a plumb line from the top rung to the ground, with the ladder fully extended at maximum elevation.[9] As described by Tutterow (2008), NFPA 1901 requires a minimum rated capacity of 114 kg (250 lb), with higher ratings in steps of 114 kg. The ladder must carry this load at the tip when fully extended horizontally without water, and at 45 degrees with water flowing.[9] Minimum dimensions include a width of 457 mm at the narrowest point, rungs at 356 mm centres and side rails at least 305 mm high.[9]

Stability is tested with a load larger than the rated capacity hung from the tip, with the stabilisers extended on firm footing. In the least stable position on a level surface the test load is 1.5 times the rated capacity. On a firm surface sloping downward at 5 degrees, in the direction most likely to cause overturning, it is 1⅓ times the rated capacity.[9] The vehicle may show no sign of instability in these tests, which should only be done at the manufacturer's facility.[19] As an illustration, a ladder rated at 114 kg must therefore stay stable with 171 kg at the tip on level ground and 152 kg on the slope.

Elevating platforms were available with booms from about 23 m to more than 61 m (75 to 200 ft). Their rated height is measured from the top rail of the platform to the ground.[3] An articulated boom reaches furthest horizontally at about half its maximum elevation, while a telescopic boom of the same length generally reaches somewhat further at higher and lower elevations.[3]

The platform must have a floor of at least 1.3 m² and a continuous guardrail between 1069 and 1118 mm high. It also needs a heat-reflective shield and a water curtain flowing at least 284 L/min (75 gpm) beneath it for protection.[3] The platform should carry at least 340 kg (750 lb) in all positions without the water system charged. Units of 34 m (110 ft) or less should reach full elevation and extension and rotate 90 degrees within 150 seconds.[3]

Tutterow (2008) calls the elevating platform clearly the best choice of aerial device for fire fighter safety. It offers protection not available on straight ladders if crews are unexpectedly enveloped in the products of combustion, space for tools and hose, and a safe working area for rescues.[9] He expected platforms to matter more for rescuing people with limited mobility, as the population was ageing and high-rise residential buildings were becoming more numerous.[9] Ground-level controls must be able to override the platform controls, so that an operator on the ground can move the platform away from danger.[3] Both ladders and platforms have many interlocks, and departments must understand them and train personnel in their function.[9][3]

Elevated master streams

An aerial device can carry a large water stream, or master stream, to a high point. Where an aerial ladder has a fixed waterway, it should be able to flow 3785 L/min (1000 gpm) at 690 kPa (100 psi) nozzle pressure. The monitor should work through a 45-degree side-to-side range and a 135-degree arc downward from the line of the ladder, and it is often remotely controlled.[9] Without a fixed waterway, a detachable ladder pipe is supplied by 76 mm hose run up the ladder, and 2271 L/min (600 gpm) is the practical maximum in normal operations.[9] Platform turrets must turn at least 45 degrees up, down and to each side and operate safely at 3785 L/min and 690 kPa in any position.[3]

The force of the stream acts back on the device. Wieder (2008) explains that the reaction of master streams from aerial ladders or platforms creates a tremendous amount of stress, and that lever effects grow as the device is extended. Operating beyond the design limits can threaten the stability of the whole structure.[20] A sudden loss of pressure, when a hose bursts or a pump stops, can cause a whipping action that damages the device.[20] Wieder considers tables of specific reactions impractical because so many forces act on an aerial device in service.[20] The nozzle reaction itself can be estimated from the flow and nozzle pressure:[21]

NR=0.0226QNP

Symbol Description Unit
NR nozzle reaction force N
Q nozzle discharge L/min
NP nozzle pressure kPa

Wieder's own example is a spray nozzle of 946 L/min at 690 kPa, which gives a reaction of about 562 N.[20] As an illustration, a fixed waterway at its rated flow of 3785 L/min and 690 kPa would give 0.0226 × 3785 × √690, or about 2250 N (about 505 lbf). Wieder notes that the lever effects of such forces grow as the device is extended.

Wieder (2008) sets out operating rules that follow from these forces. A detachable ladder pipe on a light-duty aerial ladder should be operated in line with the main beams and should not travel more than 15 degrees sideways. The stream is turned by rotating the turntable instead.[20] The fly section should not be raised or lowered while a ladder pipe is discharging, and the vehicle must never be moved with the stream flowing. Most aerial ladders are designed for a single 76 or 89 mm supply hose, and a larger hose could overload the ladder.[20] Remote-controlled nozzles on piped waterways and platforms typically do not allow the stream to be aimed outside the safe operating area.[20]

Reach, site access and building height

Reach depends on the building and on where the vehicle can stand. Comly (2008) states that, under optimum conditions, aerial equipment only reaches the equivalent of the seventh floor, and occupants above that level must be evacuated by the interior stairs.[6] In a definition by O'Hagan, a high-rise building is one without viable exterior access to its upper floors. This takes in all buildings above 30 m (100 ft), which are beyond the reach of a standard aerial ladder.[22] New York's building code treats buildings over 75 ft (23 m) as high-rise. For such buildings, Hopkins et al. (2005) note that firefighting and rescue on upper floors must be staged from inside without aerial ladder or platform trucks.[23]

Within their reach, aerial devices are used for rescue. At a fire on the sixth floor of the ten-storey Peachtree 25th office building in Atlanta in 1989, 14 occupants were rescued by ladder truck and 14 by the stairs; five people died.[24] Obstacles can prevent their use. At World Trade Center 7 in 2001, a ladder truck could not reach a security officer at a window because of the extension of the Con Edison building at the lower floors.[25]

Comly (2008) states that access lanes must carry the heaviest apparatus expected and let it get close enough to all sides for rescue and suppression. As described by him, NFPA 1, NFPA 1141 and NFPA 1144 require at least 6.11 m (20 ft) width and 4.11 m (13.5 ft) vertical clearance.[6] Widening paved surfaces to 26 ft (about 7.9 m) for aerial apparatus is recommended, excluding any parking. Commonly used turning radii are 6.7 m (22 ft) inside and 15 m (50 ft) outside.[26] If obstructions or topography keep apparatus too far away, aerial ladders, platforms and water towers are useless. Where fire service access is limited or absent, Comly recommends complete automatic sprinkler protection.[7]

Pre-incident planning takes these limits into account. Norman (2008) notes that building height affects the need for aerial devices, and that plans can call for them where they are not part of the routine response.[27] Where a construction trench separates the apparatus from the building, the aerial apparatus should enter the block, since it can reach over the trench.[28] Tutterow (2008) adds that manually raised extension ladders longer than 12 m (40 ft) are generally not needed where aerials provide access, unless congestion prevents placing them.[29] Training towers should be tall enough for the tallest aerial expected in the community over the next 10 to 20 years, with room for aerials on all sides.[30][31] In New Zealand, C/VM2 (second edition, 2025) requires vehicle access to a hard-standing with an unobstructed path to within 20 m of the firefighter entrance and any installed sprinkler or hydrant system inlets.[32]

Testing and maintenance

Aerial devices are tested before acceptance. Besides the stability tests, a prepiped waterway is flow tested at 3785 L/min and 690 kPa nozzle pressure with the device fully elevated and extended. If the vehicle has a fire pump, the test uses that pump with an intake pressure of no more than 138 kPa (20 psi).[19] In service, aerial devices develop problems from use at fires and from driving to and from alarms. NFPA 1911 requires a yearly inspection and operational test of the device and of any prepiped water system.[33]

NFPA 1911 also requires nondestructive tests at intervals not exceeding 5 years. These check structural components for hardness, welds for cracks and bolts and pins for wear or internal flaws.[33] Full testing is also needed after major repairs or when the device may have exceeded its design criteria. A qualified mechanic can usually do the annual inspection, but nondestructive testing requires specialist expertise.[34] Aerial testing had its own NFPA standard: NUREG-1805 (Iqbal and Salley, 2004) lists NFPA 1914, Standard for Testing Fire Department Aerial Devices, in its 2002 edition.[35] According to Tutterow (2008), the pump and aerial testing standards were merged into NFPA 1911 in 2007.[33]

Limits of the guidance

The aerial-device dimensions and loads in the ladder and platform sections derive from NFPA 1901 as described by Tutterow (2008).[9] The in-service test intervals come from his account of NFPA 1911.[33] Many departments chose heavier ladder ratings than the minimum.[9] Reach values, such as the seventh floor or 30 m, are approximate and depend on where the vehicle can be placed.[6][22] The illustrative reaction force uses Wieder's general nozzle formula and leaves out the lever and centre-of-gravity effects that he describes as too variable to tabulate.[20]

The apparatus and company details above mostly describe US practice in the cited 2008 handbook. The New Zealand requirement concerns access for fire service vehicles in general and does not set aerial dimensions.[32] Quints and other combinations offer flexibility, but Tutterow (2008) notes that positioning them for several purposes can occasionally be cumbersome, and that the whole vehicle is lost when one feature needs repair.[2]

See also

Notes

  1. ↑ 1.0 1.1 Tutterow (2008), p. 12-268.
  2. ↑ 2.0 2.1 2.2 2.3 2.4 Tutterow (2008), p. 12-269.
  3. ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 Tutterow (2008), p. 12-277.
  4. ↑ 4.0 4.1 Denlinger (2008), pp. 12-63–12-64.
  5. ↑ 5.0 5.1 5.2 Tutterow (2008), p. 12-275.
  6. ↑ 6.0 6.1 6.2 6.3 Comly (2008), p. 11-40.
  7. ↑ 7.0 7.1 Comly (2008), p. 11-43.
  8. ↑ Cote and Grant (2008), p. 1-54.
  9. ↑ 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 9.10 9.11 9.12 9.13 9.14 Tutterow (2008), p. 12-276.
  10. ↑ Denlinger (2008), p. 12-63.
  11. ↑ Klaene and Sanders (2008), p. 13-7.
  12. ↑ Tutterow (2008), p. 12-267.
  13. ↑ Denlinger (2008), p. 12-64.
  14. ↑ Granito (2008), p. 12-12.
  15. ↑ Granito (2008), p. 12-17.
  16. ↑ Denlinger (2008), p. 12-72.
  17. ↑ Denlinger (2008), p. 12-73.
  18. ↑ Laughlin (2008), p. 12-167.
  19. ↑ 19.0 19.1 Tutterow (2008), p. 12-282.
  20. ↑ 20.0 20.1 20.2 20.3 20.4 20.5 20.6 20.7 Wieder (2008), p. 13-34.
  21. ↑ Wieder (2008), p. 13-33.
  22. ↑ 22.0 22.1 O'Hagan (1977), as cited in Lawson and Vettori (2005), p. 72.
  23. ↑ Hopkins et al. (2005), p. 24.
  24. ↑ Isner (1990), as cited in Averill et al. (2005), pp. 3–4.
  25. ↑ McAllister et al. (2008), p. 299.
  26. ↑ Comly (2008), p. 11-41.
  27. ↑ Norman (2008), p. 12-304.
  28. ↑ Norman (2008), p. 12-306.
  29. ↑ Tutterow (2008), p. 12-284.
  30. ↑ Acomb and LeBoeuf (2008), p. 12-248.
  31. ↑ Acomb and LeBoeuf (2008), p. 12-249.
  32. ↑ 32.0 32.1 Ministry of Business, Innovation and Employment (2025b), p. 53.
  33. ↑ 33.0 33.1 33.2 33.3 Tutterow (2008), p. 12-283.
  34. ↑ Tutterow (2008), pp. 12-283–12-284.
  35. ↑ Iqbal and Salley (2004), p. E-12.

References

  • Acomb, D. J., & LeBoeuf, R. M. (2008). Fire rescue stations and fire service training centers. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-233–12-251). National Fire Protection Association.
  • Averill, J. D., Mileti, D. S., Peacock, R. D., Kuligowski, E. D., Groner, N., Proulx, G., Reneke, P. A., & Nelson, H. E. (2005). Occupant behavior, egress, and emergency communications (NIST NCSTAR 1-7). National Institute of Standards and Technology.
  • Comly, A. M., Jr. (2008). Building and site planning for fire safety. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 11-39–11-45). National Fire Protection Association.
  • Cote, A. E., & Grant, C. C. (2008). Codes and standards for the built environment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-51–1-71). National Fire Protection Association.
  • Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
  • Granito, J. A. (2008). Planning for public fire-rescue protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-3–12-22). National Fire Protection Association.
  • Hopkins, M., Schoenrock, J., & Budnick, E. (2005). Fire suppression systems (NIST NCSTAR 1-4B). National Institute of Standards and Technology.
  • Iqbal, N., & Salley, M. H. (2004). Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.
  • Klaene, B. J., & Sanders, R. (2008). Fireground operations. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-3–13-11). National Fire Protection Association.
  • Laughlin, J. W. (2008). Training programs for fire and emergency service personnel. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-161–12-175). National Fire Protection Association.
  • Lawson, J. R., & Vettori, R. L. (2005). The emergency response operations (NIST NCSTAR 1-8). National Institute of Standards and Technology.
  • McAllister, T. P., Gann, R. G., Averill, J. D., Gross, J. L., Grosshandler, W. L., Lawson, J. R., McGrattan, K. B., Pitts, W. M., Prasad, K. R., Sadek, F. H., & Nelson, H. E. (2008). Structural fire response and probable collapse sequence of World Trade Center Building 7 (NIST NCSTAR 1-9, Vols. 1–2). National Institute of Standards and Technology.
  • Ministry of Business, Innovation and Employment. (2025b). Verification Method C/VM2: Framework for fire safety design (2nd ed.).
  • Norman, J. (2008). Pre-Incident planning for emergency response. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-299–12-308). National Fire Protection Association.
  • Tutterow, R. (2008). Fire department apparatus and equipment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-267–12-287). National Fire Protection Association.
  • Wieder, M. A. (2008). Fire streams. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-23–13-35). National Fire Protection Association.