File:Fse-fire-testing-v1.svg: Difference between revisions

Latest revision as of 15:55, 2 November 2026

Cone-calorimeter setup and oxygen-consumption measurement. Based on Janssens (2002), p. 3-56.

Diagram for the article Fire testing (Fire Safety Academy wiki, level 1 Basic).

Source basis: Janssens (2002), p. 3-56
Alt text: Cone heater, specimen, spark, load cell and exhaust gas analysis in a cone calorimeter.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:55, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:58, 2 November 2026	900 × 600 (7 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:01, 2 November 2026	900 × 600 (4 KB)	Sanne (talk \| contribs)	Upload fse-fire-testing-v1.svg: diagram for Fire testing (level-1 visual plan V1)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Cone heater, specimen, spark, load cell and exhaust gas analysis in a cone calorimeter.
Image title	Schematic of a cone calorimeter. A small 0.1 m by 0.1 m specimen sits on a load cell beneath a conical electric heater; a spark igniter is above the specimen. Combustion products rise through the cone into a hood and exhaust duct leading to oxygen analysis, from which heat release rate is calculated. The load cell gives mass loss, a separate measurement. Note: heat release comes from oxygen consumption, not mass loss alone.
Width	900
Height	600

Revision as of 08:01, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Upload fse-fire-testing-v1.svg: diagram for Fire testing (level-1 visual plan V1)		Latest revision as of 15:55, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Sanne uploaded a new version of File:Fse-fire-testing-v1.svg
(One intermediate revision by the same user not shown)
(No difference)