Skip to content
From Fire Safety Academy Wiki
Lisa (talk | contribs)
New FSE wiki article: Technical rescue (written by Claude Opus 5.5)
 
Peter (talk | contribs)
Wiki review: corrected 6 errors: typo (6) (Claude Opus 5.5)
 
(3 intermediate revisions by 2 users not shown)
Line 4: Line 4:


== Typical and specialised rescue ==
== Typical and specialised rescue ==
Rescue is a significant part of the work of emergency response organisations worldwide, and some rescues recur so often that they become somewhat routine. Wright (2008) gives two examples that may be considered "typical": interior [[Search and rescue]] as part of fireground operations, and the extrication of occupants trapped in cars after a crash.<ref name="RW-13-13" /> Because these tasks recur often, an organisation finds it easier to keep its members competent in them.<ref name="RW-13-14" /> Denlinger (2008) adds that most departments offer some level of rescue service, because extrication and emergency medical response are universal needs.<ref name="Den-12-55">Denlinger (2008), p. 12-55.</ref>
Rescue is a significant part of the work of emergency response organisations worldwide, and some rescues recur so often that they become somewhat routine. Wright (2008) gives two examples that may be considered "typical": interior [[search and rescue]] as part of fireground operations, and the extrication of occupants trapped in cars after a crash.<ref name="RW-13-13" /> Because these tasks recur often, an organisation finds it easier to keep its members competent in them.<ref name="RW-13-14" /> Denlinger (2008) adds that most departments offer some level of rescue service, because extrication and emergency medical response are universal needs.<ref name="Den-12-55">Denlinger (2008), p. 12-55.</ref>


Specialised technical rescue is the opposite case. It requires training and techniques far above the norm, so that the emergency can be handled without causing a further incident. Such operations may be needed only seldom but are vital when they are.<ref name="RW-13-14" /> The complexity of rescue incidents varies greatly and may overwhelm an unprepared agency. The training and experience of the responding agencies are typically the main factors in a safe and successful outcome.<ref name="RW-13-13" />
Specialised technical rescue is the opposite case. It requires training and techniques far above the norm, so that the emergency can be handled without causing a further incident. Such operations may be needed only seldom but are vital when they are.<ref name="RW-13-14" /> The complexity of rescue incidents varies greatly and may overwhelm an unprepared agency. The training and experience of the responding agencies are typically the main factors in a safe and successful outcome.<ref name="RW-13-13" />


The line between the two is not sharp. Wright counts routine car extrication among the typical rescues, yet NFPA 1670 treats vehicle and machinery rescue as one of its technical disciplines, covering people trapped in transport conveyances and in fixed machinery.<ref name="RW-13-13-14" /> Many US fire departments use separate rescue companies for both [[Firefighting]] and non-fire incidents. These companies specialise in technical rescue, such as extricating victims from vehicles after accidents, removing injured persons from perilous locations and assisting victims of industrial accidents. On the fireground they are usually assigned to search and rescue and to medical treatment, and they may also serve as rapid intervention teams.<ref name="Den-12-64">Denlinger (2008), p. 12-64.</ref>
The line between the two is not sharp. Wright counts routine car extrication among the typical rescues, yet NFPA 1670 treats vehicle and machinery rescue as one of its technical disciplines, covering people trapped in transport conveyances and in fixed machinery.<ref name="RW-13-13-14" /> Many US fire departments use separate rescue companies for both [[firefighting]] and non-fire incidents. These companies specialise in technical rescue, such as extricating victims from vehicles after accidents, removing injured persons from perilous locations and assisting victims of industrial accidents. On the fireground they are usually assigned to search and rescue and to medical treatment, and they may also serve as rapid intervention teams.<ref name="Den-12-64">Denlinger (2008), p. 12-64.</ref>


== Disciplines and standards ==
== Disciplines and standards ==
Line 33: Line 33:


Most of these disciplines are defined by the environment in which the rescue takes place. Rope rescue is different, because it is a set of techniques used in almost every environment.<ref name="RW-13-14" /> Rope techniques are a basic skill underlying most other types of rescue, and most fire fighters know basic rope work and knot tying from their basic training.<ref name="RW-13-19">R. Wright (2008), p. 13-19.</ref> The disciplines also depend on each other. Confined space rescue at the operations level, for example, requires operations-level capability in both rope rescue and trench and excavation rescue.<ref name="RW-13-15" />
Most of these disciplines are defined by the environment in which the rescue takes place. Rope rescue is different, because it is a set of techniques used in almost every environment.<ref name="RW-13-14" /> Rope techniques are a basic skill underlying most other types of rescue, and most fire fighters know basic rope work and knot tying from their basic training.<ref name="RW-13-19">R. Wright (2008), p. 13-19.</ref> The disciplines also depend on each other. Confined space rescue at the operations level, for example, requires operations-level capability in both rope rescue and trench and excavation rescue.<ref name="RW-13-15" />
[[File:fse-technical-rescue-v1.svg|thumb|upright=1.5|alt=Matrix of seven technical rescue disciplines against three capability levels, with arrows from confined space to rope and trench rescue|The seven disciplines of NFPA 1670 and its three levels of capability. Confined space rescue at operations level requires operations-level rope rescue and trench and excavation rescue.]]


The second standard, NFPA 1006, ''Standard for Rescue Technician Professional Qualifications'', applies to individuals. At the time of writing it had only one level, the technician level, reached by completing a set of job performance requirements. It follows a "core plus one" approach: a candidate completes core requirements common to all disciplines plus the requirements of one specific discipline. The core covers site operations, victim management, the care and repair of protective equipment and tools, and ropes and rigging. No one can become a generic rescue technician, only a technician in one or more named disciplines.<ref name="RW-13-15" />
The second standard, NFPA 1006, ''Standard for Rescue Technician Professional Qualifications'', applies to individuals. At the time of writing it had only one level, the technician level, reached by completing a set of job performance requirements. It follows a "core plus one" approach: a candidate completes core requirements common to all disciplines plus the requirements of one specific discipline. The core covers site operations, victim management, the care and repair of protective equipment and tools, and ropes and rigging. No one can become a generic rescue technician, only a technician in one or more named disciplines.<ref name="RW-13-15" />
Line 38: Line 39:
Wright lists six disciplines in the version of NFPA 1006 he describes: structural collapse, rope, confined space, vehicle and machinery, surface water and trench rescue.<ref name="RW-13-15" /> Laughlin (2008) gives a longer list of NFPA 1006 technician certifications accredited by the National Board on Fire Service Professional Qualifications (Pro Board) and the International Fire Service Accreditation Congress (IFSAC). It adds subterranean, dive and wilderness rescue to Wright's six.<ref name="Laugh-12-170">Laughlin (2008), p. 12-170.</ref>
Wright lists six disciplines in the version of NFPA 1006 he describes: structural collapse, rope, confined space, vehicle and machinery, surface water and trench rescue.<ref name="RW-13-15" /> Laughlin (2008) gives a longer list of NFPA 1006 technician certifications accredited by the National Board on Fire Service Professional Qualifications (Pro Board) and the International Fire Service Accreditation Congress (IFSAC). It adds subterranean, dive and wilderness rescue to Wright's six.<ref name="Laugh-12-170">Laughlin (2008), p. 12-170.</ref>


Many specialised rescues fell outside both standards. Wright lists urban search and rescue, hazardous materials rescue operations, high-rise rescue, helicopter rescue, tunnel rescue, heavy rescue for air, rail and maritime incidents, and large-scale disaster rescue.<ref name="RW-13-15" /> Wright draws a warning for new teams from the history of [[Hazardous materials response]]. In the 1980s many US jurisdictions hastily set up hazardous materials teams. Many then found that the demands on time, money and commitment forced them to reconsider their level of involvement.<ref name="RW-13-19" />
Many specialised rescues fell outside both standards. Wright lists urban search and rescue, hazardous materials rescue operations, high-rise rescue, helicopter rescue, tunnel rescue, heavy rescue for air, rail and maritime incidents, and large-scale disaster rescue.<ref name="RW-13-15" /> Wright draws a warning for new teams from the history of [[hazardous materials response]]. In the 1980s many US jurisdictions hastily set up hazardous materials teams. Many then found that the demands on time, money and commitment forced them to reconsider their level of involvement.<ref name="RW-13-19" />


== Levels of capability ==
== Levels of capability ==
Line 54: Line 55:
To limit such risks, Wright recommends a "systems safety approach" to all rescue operations. All rescue equipment, procedures and operating personnel are continually analysed against an established set of safety guidelines, to reduce the chance of system or operational failure. The analysis may include visual and tactile checks of rescue systems and components, and confirmation that the people operating them are ready.<ref name="RW-13-13" /> In confined spaces, the hazards themselves are no different from those met at other incidents. The real danger lies in the inability to escape them quickly from cramped, poorly ventilated and congested areas close to equipment and processes.<ref name="RW-13-20">R. Wright (2008), p. 13-20.</ref>
To limit such risks, Wright recommends a "systems safety approach" to all rescue operations. All rescue equipment, procedures and operating personnel are continually analysed against an established set of safety guidelines, to reduce the chance of system or operational failure. The analysis may include visual and tactile checks of rescue systems and components, and confirmation that the people operating them are ready.<ref name="RW-13-13" /> In confined spaces, the hazards themselves are no different from those met at other incidents. The real danger lies in the inability to escape them quickly from cramped, poorly ventilated and congested areas close to equipment and processes.<ref name="RW-13-20">R. Wright (2008), p. 13-20.</ref>


Collapse is both a reason for technical rescue and a threat to rescuers, which links this field to [[Building collapse during firefighting]]. Corbett (2008) warns that the extraordinary rescue and body recovery operations after the Oklahoma City bombing of 1995 could be repeated at a fire in a concrete building under construction. There, a failure of the temporary formwork that drops one floor onto another is almost certain to cause [[Progressive collapse]] of several floors. In such cases it may be advisable for fire fighters to stay out until it has been decided whether entry is safe.<ref name="Corbett-12-136">Corbett (2008), p. 12-136.</ref>
Collapse is both a reason for technical rescue and a threat to rescuers, which links this field to [[building collapse during firefighting]]. Corbett (2008) warns that the extraordinary rescue and body recovery operations after the Oklahoma City bombing of 1995 could be repeated at a fire in a concrete building under construction. There, a failure of the temporary formwork that drops one floor onto another is almost certain to cause [[progressive collapse]] of several floors. In such cases it may be advisable for fire fighters to stay out until it has been decided whether entry is safe.<ref name="Corbett-12-136">Corbett (2008), p. 12-136.</ref>


Protective equipment for this work was set by NFPA product standards. NFPA 1951, ''Standard on Protective Ensembles for Technical Rescue Incidents'', in its 2007 (second) edition, specified three ensembles. A utility ensemble protects against physical hazards, with basic flame resistance and high breathability to reduce heat stress. A rescue and recovery ensemble adds a barrier against blood-borne pathogens from injured or dead victims. A chemical, biological, radiological and nuclear (CBRN) ensemble adds limited protection against chemicals, biological agents and radiological particulates at terrorism incidents.<ref name="Teele-12-159" /> The ensembles do not cover fire fighting, hazardous materials work outside CBRN incidents, wilderness search and rescue, water and swiftwater rescue, contaminated water diving or cave rescue.<ref name="Teele-12-159" />
Protective equipment for this work was set by NFPA product standards. NFPA 1951, ''Standard on Protective Ensembles for Technical Rescue Incidents'', in its 2007 (second) edition, specified three ensembles. A utility ensemble protects against physical hazards, with basic flame resistance and high breathability to reduce heat stress. A rescue and recovery ensemble adds a barrier against blood-borne pathogens from injured or dead victims. A chemical, biological, radiological and nuclear (CBRN) ensemble adds limited protection against chemicals, biological agents and radiological particulates at terrorism incidents.<ref name="Teele-12-159" /> The ensembles do not cover fire fighting, hazardous materials work outside CBRN incidents, wilderness search and rescue, water and swiftwater rescue, contaminated water diving or cave rescue.<ref name="Teele-12-159" />
Line 66: Line 67:


Technical rescues can come close to overwhelming smaller organisations, and even large agencies can be taxed by them in disasters. Community resource planning (CRP) lets an agency identify its own shortfalls and set up a system for drawing on outside resources. A community resource plan lists the resources needed for expected rescue incidents, which shortens the time needed to find and request them.<ref name="RW-13-16" /> Its database is organised in four areas: equipment, supplies, services and technical support.<ref name="RW-13-16" />
Technical rescues can come close to overwhelming smaller organisations, and even large agencies can be taxed by them in disasters. Community resource planning (CRP) lets an agency identify its own shortfalls and set up a system for drawing on outside resources. A community resource plan lists the resources needed for expected rescue incidents, which shortens the time needed to find and request them.<ref name="RW-13-16" /> Its database is organised in four areas: equipment, supplies, services and technical support.<ref name="RW-13-16" />
[[File:fse-technical-rescue-v3.svg|thumb|upright=1.5|alt=Flowchart from community risk analysis through choice of capability and community resource planning to agreements, implementation and annual update|Planning a technical rescue capability as described for US agencies around 2007, including community resource planning.]]


The database lists range from cranes, excavators, shoring and generators to lumberyards, helicopter services, structural engineers and search-and-rescue dog handlers.<ref name="RW-13-16-18">R. Wright (2008), pp. 13-16–13-18.</ref> Agreements with providers can take the form of memoranda of agreement, [[Mutual aid]] agreements, service agreements or service contracts, reviewed by legal counsel. The directory should be revalidated every year so that names, telephone numbers and conditions stay current.<ref name="RW-13-18" />
The database lists range from cranes, excavators, shoring and generators to lumberyards, helicopter services, structural engineers and search-and-rescue dog handlers.<ref name="RW-13-16-18">R. Wright (2008), pp. 13-16–13-18.</ref> Agreements with providers can take the form of memoranda of agreement, [[mutual aid]] agreements, service agreements or service contracts, reviewed by legal counsel. The directory should be revalidated every year so that names, telephone numbers and conditions stay current.<ref name="RW-13-18" />


The second national needs assessment of the US fire service, carried out in 2005, found that 57 percent of local fire departments provided a technical rescue service.<ref name="HC-3-27" /> As an illustration, applied to the 30,500 departments counted in the same table, this share corresponds to roughly 17,000 departments. The same survey estimated that 50 percent of departments were involved in technical rescue without having formally trained all the fire fighters involved. Technical rescue was the only service for which this share was not always higher in rural communities of under 2,500 people.<ref name="Jen-12-42">Jenaway (2008), p. 12-42.</ref> Written agreements for using non-local resources for technical rescue and emergency medical services at a structural collapse were lacking in 74 percent of departments, although such agreements had become more common since 2001.<ref name="Jen-12-43">Jenaway (2008), p. 12-43.</ref>
The second national needs assessment of the US fire service, carried out in 2005, found that 57 percent of local fire departments provided a technical rescue service.<ref name="HC-3-27" /> As an illustration, applied to the 30,500 departments counted in the same table, this share corresponds to roughly 17,000 departments. The same survey estimated that 50 percent of departments were involved in technical rescue without having formally trained all the fire fighters involved. Technical rescue was the only service for which this share was not always higher in rural communities of under 2,500 people.<ref name="Jen-12-42">Jenaway (2008), p. 12-42.</ref> Written agreements for using non-local resources for technical rescue and emergency medical services at a structural collapse were lacking in 74 percent of departments, although such agreements had become more common since 2001.<ref name="Jen-12-43">Jenaway (2008), p. 12-43.</ref>
Line 77: Line 79:
== Training ==
== Training ==
Wright (2008) gives indicative course lengths for two disciplines, based on the content of NFPA 1670 for its three levels. He stresses that these durations were common but are not a standard. The right length depends on the learner's experience and on how often the skills are used. A fire fighter on a busy rescue unit may need less formal continuing education than a volunteer on an industrial rescue team. Initial training without ongoing practice lets rescuers forget the specialised techniques on which a technical rescue depends.<ref name="RW-13-19" />
Wright (2008) gives indicative course lengths for two disciplines, based on the content of NFPA 1670 for its three levels. He stresses that these durations were common but are not a standard. The right length depends on the learner's experience and on how often the skills are used. A fire fighter on a busy rescue unit may need less formal continuing education than a volunteer on an industrial rescue team. Initial training without ongoing practice lets rescuers forget the specialised techniques on which a technical rescue depends.<ref name="RW-13-19" />
[[File:fse-technical-rescue-v2.svg|thumb|upright=1.5|alt=Horizontal range bars of training hours for rope and confined space rescue at operations and technician level|Typical initial training durations for rope and confined space rescue in the United States around 2007. Wright stresses that these are common durations, not a standard.]]


{| class="wikitable"
{| class="wikitable"
Line 96: Line 99:


For rope rescue, an awareness course for most rescuers can be completed in a single day, and a combined awareness and operations course is commonly given in a five-day format.<ref name="RW-13-19-20">R. Wright (2008), pp. 13-19–13-20.</ref> NFPA 1670 distinguishes two rope environments. In a high angle environment the load is supported mainly by the rope rescue system, while at low angle the load is supported mostly by itself. Organisations sometimes skip rope training because they have no high-rise buildings or mountains. A risk assessment may still reveal pits, channels or ravines from which victims must be lifted, which can demand the same or greater rope capability.<ref name="RW-13-20" />
For rope rescue, an awareness course for most rescuers can be completed in a single day, and a combined awareness and operations course is commonly given in a five-day format.<ref name="RW-13-19-20">R. Wright (2008), pp. 13-19–13-20.</ref> NFPA 1670 distinguishes two rope environments. In a high angle environment the load is supported mainly by the rope rescue system, while at low angle the load is supported mostly by itself. Organisations sometimes skip rope training because they have no high-rise buildings or mountains. A risk assessment may still reveal pits, channels or ravines from which victims must be lifted, which can demand the same or greater rope capability.<ref name="RW-13-20" />
[[File:fse-technical-rescue-v4.svg|thumb|upright=1.5|alt=Two sketches: a litter hanging free on a rope down a vertical face, and a litter resting on a gentle slope held by a rope|High angle and low angle rope rescue as defined in NFPA 1670: in high angle work the rope system carries most of the load, in low angle work the load carries mostly itself.]]


Confined space training at the operations level also covers protective measures for entrants, checks that entrants can cope physically and mentally with tight spaces, and the duties of each team role. It includes a method for passing victim information to [[Fire-based emergency medical services|emergency medical services]] when the patient is handed over. Operations-level training should be considered a prerequisite for the technician level.<ref name="RW-13-21" />
Confined space training at the operations level also covers protective measures for entrants, checks that entrants can cope physically and mentally with tight spaces, and the duties of each team role. It includes a method for passing victim information to [[Fire-based emergency medical services|emergency medical services]] when the patient is handed over. Operations-level training should be considered a prerequisite for the technician level.<ref name="RW-13-21" />


US training centres built dedicated props for this work. A confined space prop could combine pipes, manholes, tanks and shipping containers, kept above grade as far as possible. A trench rescue prop uses parallel concrete retaining walls with soil between them, so that a real trench collapse cannot occur if trainees make mistakes. Collapse rescue props range from concrete cutting props to rubble piles that simulate fully collapsed buildings.<ref name="AL-12-251">Acomb and LeBoeuf (2008), p. 12-251.</ref>
Acomb and LeBoeuf (2008) describe possible training props for technical rescue. A confined space prop could combine pipes, manholes, tanks and shipping containers, kept above grade as far as possible. Their example of a trench rescue prop uses parallel concrete retaining walls with soil between them, so that a real trench collapse cannot occur if trainees make mistakes. Their examples of collapse rescue props range from concrete cutting props to rubble piles that simulate fully collapsed buildings.<ref name="AL-12-251">Acomb and LeBoeuf (2008), p. 12-251.</ref>
 
[[File:fse-technical-rescue-v5.jpg|thumb|upright=1.5|alt=Rescuers in helmets working inside a narrow trench whose walls are held by timber or hydraulic shoring|Trench rescue training: shoring holds the trench walls so that rescuers can work inside the excavation.]]


== Large-scale and atypical rescues ==
== Large-scale and atypical rescues ==
In the United States around 2008, the urban search and rescue (USAR) system of the Federal Emergency Management Agency (FEMA) consisted of 28 locally based task forces. Their members had special search, rescue, engineering, communication and medical skills, and emergency shoring systems for damaged structures were being taught to the teams.<ref name="Pessiki-19-69">Pessiki (2008), p. 19-69.</ref> After Hurricane Katrina in 2005, several national USAR teams from Florida were sent to the Gulf Coast. Once an incident command post had been set up in Biloxi, Mississippi, their task was to search three coastal counties and three counties to the north.<ref name="Penney-5-30">Penney (2008), p. 5-30.</ref>
In the United States around 2008, the urban search and rescue (USAR) system of the Federal Emergency Management Agency (FEMA) consisted of 28 locally based task forces. Their members had special search, rescue, engineering, communication and medical skills, and emergency shoring systems for damaged structures were being taught to the teams.<ref name="Pessiki-19-69">Pessiki (2008), p. 19-69.</ref> After Hurricane Katrina in 2005, several national USAR teams from Florida were sent to the Gulf Coast. Once an incident command post had been set up in Biloxi, Mississippi, their task was to search three coastal counties and three counties to the north.<ref name="Penney-5-30">Penney (2008), p. 5-30.</ref>


Some rescue methods are atypical for fire departments. Klaene and Sanders (2008) list interior stairs, fire escapes, aerial apparatus and ground ladders as the common rescue methods. Elevators, scaling ladders, ropes, helicopters, life nets and air bags are atypical and often expose rescuer and victim to extraordinary danger.<ref name="KS-13-7">Klaene and Sanders (2008), p. 13-7.</ref> Successful helicopter rescues from roofs have rarely been performed, because roof structures and antennas hinder a close approach and thermal updrafts make it hazardous.<ref name="Lathrop-4-77">Lathrop (2008a), p. 4-77.</ref> The MGM Grand Hotel fire in Las Vegas in November 1980 was the first US high-rise fire in which helicopters evacuated large numbers of people. About 300 people left by helicopter, while the fire department rescued about 900 by other means.<ref name="Lathrop-4-77" /><ref name="Bryan-4-21">Bryan (2008), p. 4-21.</ref>
Some rescue methods are atypical for fire departments. Klaene and Sanders (2008) list interior stairs, fire escapes, aerial apparatus and ground ladders as the common rescue methods. Elevators, scaling ladders, ropes, helicopters, life nets and air bags are atypical and often expose rescuer and victim to extraordinary danger.<ref name="KS-13-7">Klaene and Sanders (2008), p. 13-7.</ref> Successful helicopter rescues from roofs have rarely been performed, because roof structures and antennas hinder a close approach; during significant fires, thermal updrafts add another hazard.<ref name="Lathrop-4-77">Lathrop (2008a), p. 4-77.</ref>
 
The MGM Grand Hotel fire in Las Vegas in November 1980 was the first US high-rise fire in which helicopters evacuated large numbers of people. About 300 people left by helicopter, while the fire department rescued about 900 by other means.<ref name="Bryan-4-21">Bryan (2008), p. 4-21.</ref>


The World Trade Center attack of 11 September 2001 illustrates these limits. The site's emergency preparedness manual contained no plan for roof rescue. New York police had nevertheless removed a small number of people by roof rescue during the 1993 bombing.<ref name="LV-48">Lawson and Vettori (2005), p. 48.</ref> After that bombing, the New York fire department adopted an air support plan that treated roof evacuation by helicopter as hazardous, time-consuming and a last resort.<ref name="LV-49">Lawson and Vettori (2005), p. 49.</ref> In 2001, heavy smoke prevented police helicopters from landing on the roof of the north tower. At 9:35 a.m. the police leadership ordered that no roof rescues be attempted, and at 9:43 a.m. that no one should rappel onto the towers.<ref name="LV-51-53">Lawson and Vettori (2005), pp. 51–53.</ref>
The World Trade Center attack of 11 September 2001 illustrates these limits. The site's emergency preparedness manual contained no plan for roof rescue. New York police had nevertheless removed a small number of people by roof rescue during the 1993 bombing.<ref name="LV-48">Lawson and Vettori (2005), p. 48.</ref> After that bombing, the New York fire department adopted an air support plan that treated roof evacuation by helicopter as hazardous, time-consuming and a last resort.<ref name="LV-49">Lawson and Vettori (2005), p. 49.</ref> In 2001, heavy smoke prevented police helicopters from landing on the roof of the north tower. At 9:35 a.m. the police leadership ordered that no roof rescues be attempted, and at 9:43 a.m. that no one should rappel onto the towers.<ref name="LV-51-53">Lawson and Vettori (2005), pp. 51–53.</ref>

Latest revision as of 00:37, 16 November 2026

Technical rescue is the rescue of people from situations that demand specialised training, techniques and equipment far above those of everyday fire and emergency service work.[1] The word rescue itself means to remove someone from confinement or danger.[2] Technical rescue operations are commonly performed at building and structural collapses, machinery and vehicle accidents, confined space entries, trench cave-ins and rope rescues. They include victim search, extrication, rescue, body recovery and site stabilisation.[3] Because such operations are seldom needed, they may pose the greatest risk to response agencies, through errors of judgement and lower skill in unfamiliar territory.[4]

In the United States, the field was organised around two NFPA standards: NFPA 1670 for the capability of organisations and NFPA 1006 for the qualifications of individual rescue technicians. NFPA 1670 recognised seven disciplines and three levels of capability: awareness, operations and technician.[4][5] In 2005, 57 percent of US local fire departments provided a technical rescue service.[6] The standards and practices in this article are those described in the 2008 edition of the NFPA Fire Protection Handbook, with an example from the NIST report on the World Trade Center attack of 2001.

Typical and specialised rescue

Rescue is a significant part of the work of emergency response organisations worldwide, and some rescues recur so often that they become somewhat routine. Wright (2008) gives two examples that may be considered "typical": interior search and rescue as part of fireground operations, and the extrication of occupants trapped in cars after a crash.[2] Because these tasks recur often, an organisation finds it easier to keep its members competent in them.[4] Denlinger (2008) adds that most departments offer some level of rescue service, because extrication and emergency medical response are universal needs.[7]

Specialised technical rescue is the opposite case. It requires training and techniques far above the norm, so that the emergency can be handled without causing a further incident. Such operations may be needed only seldom but are vital when they are.[4] The complexity of rescue incidents varies greatly and may overwhelm an unprepared agency. The training and experience of the responding agencies are typically the main factors in a safe and successful outcome.[2]

The line between the two is not sharp. Wright counts routine car extrication among the typical rescues, yet NFPA 1670 treats vehicle and machinery rescue as one of its technical disciplines, covering people trapped in transport conveyances and in fixed machinery.[1] Many US fire departments use separate rescue companies for both firefighting and non-fire incidents. These companies specialise in technical rescue, such as extricating victims from vehicles after accidents, removing injured persons from perilous locations and assisting victims of industrial accidents. On the fireground they are usually assigned to search and rescue and to medical treatment, and they may also serve as rapid intervention teams.[8]

Disciplines and standards

Until a few years before the 2008 handbook was written, little had been done in the United States to identify the most common specialised rescue situations and the qualifications needed for them. The National Fire Protection Association (NFPA) addressed this with two standards. NFPA 1670, Standard on Operations and Training for Technical Search and Rescue Incidents, applies to organisations. It does not set qualifications for individuals but sets the operational capability an organisation needs if it wishes to perform technical rescue.[4] The table lists the seven disciplines that NFPA 1670 recognised at the time, with the definitions as paraphrased by Wright (2008).

Disciplines of technical rescue in NFPA 1670, as described by R. Wright (2008)[4]
Discipline Scope
Structural collapse rescue Locating and removing victims from collapsed buildings or other structures
Rope rescue Using rope and related equipment to raise, lower, reach or otherwise move victims and rescuers; methods vary with the response area
Confined space rescue Removing ill or injured persons from enclosed structures with limited access and egress that a person can bodily enter, that are not intended for continuous occupancy, and that hold or may hold serious hazards
Vehicle and machinery rescue Extricating persons trapped in transport conveyances and fixed machinery
Water rescue Rescue in four water-related disciplines: dive, ice, surf and swift water
Wilderness search and rescue Locating and removing persons trapped or stranded in a wilderness environment
Trench and excavation rescue Locating and removing persons from collapsed trenches or other excavations

Most of these disciplines are defined by the environment in which the rescue takes place. Rope rescue is different, because it is a set of techniques used in almost every environment.[4] Rope techniques are a basic skill underlying most other types of rescue, and most fire fighters know basic rope work and knot tying from their basic training.[9] The disciplines also depend on each other. Confined space rescue at the operations level, for example, requires operations-level capability in both rope rescue and trench and excavation rescue.[5]

Matrix of seven technical rescue disciplines against three capability levels, with arrows from confined space to rope and trench rescue
The seven disciplines of NFPA 1670 and its three levels of capability. Confined space rescue at operations level requires operations-level rope rescue and trench and excavation rescue.

The second standard, NFPA 1006, Standard for Rescue Technician Professional Qualifications, applies to individuals. At the time of writing it had only one level, the technician level, reached by completing a set of job performance requirements. It follows a "core plus one" approach: a candidate completes core requirements common to all disciplines plus the requirements of one specific discipline. The core covers site operations, victim management, the care and repair of protective equipment and tools, and ropes and rigging. No one can become a generic rescue technician, only a technician in one or more named disciplines.[5]

Wright lists six disciplines in the version of NFPA 1006 he describes: structural collapse, rope, confined space, vehicle and machinery, surface water and trench rescue.[5] Laughlin (2008) gives a longer list of NFPA 1006 technician certifications accredited by the National Board on Fire Service Professional Qualifications (Pro Board) and the International Fire Service Accreditation Congress (IFSAC). It adds subterranean, dive and wilderness rescue to Wright's six.[10]

Many specialised rescues fell outside both standards. Wright lists urban search and rescue, hazardous materials rescue operations, high-rise rescue, helicopter rescue, tunnel rescue, heavy rescue for air, rail and maritime incidents, and large-scale disaster rescue.[5] Wright draws a warning for new teams from the history of hazardous materials response. In the 1980s many US jurisdictions hastily set up hazardous materials teams. Many then found that the demands on time, money and commitment forced them to reconsider their level of involvement.[9]

Levels of capability

NFPA 1670 sets three levels of capability for each discipline. The authority having jurisdiction chooses the disciplines and the level for each one through a hazard analysis and risk assessment. A chapter on general requirements, covering incident response planning, protective equipment and safety, applies whichever disciplines an organisation chooses.[4]

An awareness-level organisation should be able to recognise and avoid the hazard. Its intervention is minimal, although some actions are allowed, such as retrieving from outside a person in a full-body harness attached to a mechanical winch. Its main duties are to isolate the scene and to call for qualified help.[11] An operations-level organisation can perform certain simpler rescues. It must have all awareness-level capabilities plus the skills listed for the discipline, and it must still plan for specialised help.[5]

A technician-level organisation has the highest capability the standard offers in a discipline. Even this level is no guarantee that every situation can be handled, since some incidents are so complex that specialised assistance is still needed. At every level, success depends on assessing the need for special equipment and services, planning for them and acquiring them.[5]

The confined space discipline shows how the levels translate into real spaces. Operations-level organisations train for entry rescues from spaces with a clear line of sight to the victim and no entanglement hazards. Such a space has an opening large enough to enter wearing a self-contained breathing apparatus (SCBA) as the maker intends, and room for two or more rescuers. It is easier than a congested space with an 18-in. (0.45-m) round entry portal and a victim out of sight 30 ft (9.1 m) from the entry. Technician-level organisations train for entry rescues into more complicated spaces of this kind.[12]

Rescuer safety and equipment

Wright (2008) calls the safety of rescue personnel perhaps the most important consideration at any incident and suggests the motto "Don't become a victim". Well-intentioned rescuers have died because they disregarded their own safety, and such individual efforts often defeat an otherwise effective team effort by adding another victim.[2] In a fire in a sprinklered paper warehouse in Idaho, for example, bales of scrap paper collapsed and trapped two fire fighters. A second collapse trapped seven would-be rescuers, and in the end three members of the plant fire department and two other employees died.[13]

To limit such risks, Wright recommends a "systems safety approach" to all rescue operations. All rescue equipment, procedures and operating personnel are continually analysed against an established set of safety guidelines, to reduce the chance of system or operational failure. The analysis may include visual and tactile checks of rescue systems and components, and confirmation that the people operating them are ready.[2] In confined spaces, the hazards themselves are no different from those met at other incidents. The real danger lies in the inability to escape them quickly from cramped, poorly ventilated and congested areas close to equipment and processes.[14]

Collapse is both a reason for technical rescue and a threat to rescuers, which links this field to building collapse during firefighting. Corbett (2008) warns that the extraordinary rescue and body recovery operations after the Oklahoma City bombing of 1995 could be repeated at a fire in a concrete building under construction. There, a failure of the temporary formwork that drops one floor onto another is almost certain to cause progressive collapse of several floors. In such cases it may be advisable for fire fighters to stay out until it has been decided whether entry is safe.[15]

Protective equipment for this work was set by NFPA product standards. NFPA 1951, Standard on Protective Ensembles for Technical Rescue Incidents, in its 2007 (second) edition, specified three ensembles. A utility ensemble protects against physical hazards, with basic flame resistance and high breathability to reduce heat stress. A rescue and recovery ensemble adds a barrier against blood-borne pathogens from injured or dead victims. A chemical, biological, radiological and nuclear (CBRN) ensemble adds limited protection against chemicals, biological agents and radiological particulates at terrorism incidents.[3] The ensembles do not cover fire fighting, hazardous materials work outside CBRN incidents, wilderness search and rescue, water and swiftwater rescue, contaminated water diving or cave rescue.[3]

Rescue ropes and their hardware were covered by NFPA 1983. Life safety rope is a static, low-stretch rope intended for use where the fall factor will not exceed 0.25, and it is classed as light use or general use according to its minimum breaking strength.[3] In the US practice described by Teele (2008), SCBA is required wherever atmospheres that are immediately dangerous to life or health, or oxygen-deficient, exist or are expected. This includes confined space rescue and certain technical rescue operations.[16] Technical rescue personnel should also wear a personal alert safety system (PASS) in confined space, structural collapse and extrication work. This alarm device can be set off by hand or automatically when its sensor detects that the wearer has stopped moving.[17]

Planning a rescue capability

In the US approach described by Wright (2008), the need for specialised rescue teams is typically based on a thorough analysis of community risk. It should typically review present conditions and past incidents. An acceptable level of risk may then be set and balanced against the organisation's capabilities and the availability of outside help. Identifying the risk is not enough: only structured implementation of an action plan makes the organisation ready.[5] The obvious needs are training, personnel and equipment. Commitment at all levels, logistical planning and a review of legal consequences are also required, and the cost may exceed what an average organisation can fund by itself.[18]

Wright frames the planning process as ten questions. They cover the type of team needed, the local risk factors, existing expertise, the achievable level of capability and whether the service is best delivered alone or with regional, industrial or private partners. They also cover staff interest, cost, applicable rules and the time needed to build the programme. For the United States, the rules listed include those of NFPA, the Occupational Safety and Health Administration (OSHA) and seven other named bodies.[19] Initial interest in a new programme may be high but may fade quickly as training and time demands grow.[9]

Technical rescues can come close to overwhelming smaller organisations, and even large agencies can be taxed by them in disasters. Community resource planning (CRP) lets an agency identify its own shortfalls and set up a system for drawing on outside resources. A community resource plan lists the resources needed for expected rescue incidents, which shortens the time needed to find and request them.[18] Its database is organised in four areas: equipment, supplies, services and technical support.[18]

Flowchart from community risk analysis through choice of capability and community resource planning to agreements, implementation and annual update
Planning a technical rescue capability as described for US agencies around 2007, including community resource planning.

The database lists range from cranes, excavators, shoring and generators to lumberyards, helicopter services, structural engineers and search-and-rescue dog handlers.[20] Agreements with providers can take the form of memoranda of agreement, mutual aid agreements, service agreements or service contracts, reviewed by legal counsel. The directory should be revalidated every year so that names, telephone numbers and conditions stay current.[19]

The second national needs assessment of the US fire service, carried out in 2005, found that 57 percent of local fire departments provided a technical rescue service.[6] As an illustration, applied to the 30,500 departments counted in the same table, this share corresponds to roughly 17,000 departments. The same survey estimated that 50 percent of departments were involved in technical rescue without having formally trained all the fire fighters involved. Technical rescue was the only service for which this share was not always higher in rural communities of under 2,500 people.[21] Written agreements for using non-local resources for technical rescue and emergency medical services at a structural collapse were lacking in 74 percent of departments, although such agreements had become more common since 2001.[22]

The scope of rescue work had grown as well. Denlinger (2008) reports that the rescue services of US fire-rescue departments had expanded significantly, with heavy rescue, structural collapse, trench, confined space and high angle rope rescue all becoming more common. Equipment bought with federal Homeland Security funds had made these services more widespread than ever before.[23] After the Oklahoma City bombing, the first attack on the World Trade Center and the attacks of 11 September 2001, many departments developed technical rescue programmes for confined space, whitewater and high-angle rescue.[24]

In US industry, the OSHA standard on permit-required confined spaces, 29 CFR 1910.146, requires employers to set up procedures for summoning rescue services, rescuing entrants and preventing unauthorised rescue attempts.[25] It also requires that the site's rescue agency be allowed to practise in representative spaces once a year.[26] OSHA's rule covers workers in regulated facilities only, while the NFPA standards apply to rescues anywhere, from a petrochemical plant to a backyard well. NFPA also assumes that any space to which a rescue team is called may hold some hazard, whereas OSHA provides for spaces without hazards.[14]

Training

Wright (2008) gives indicative course lengths for two disciplines, based on the content of NFPA 1670 for its three levels. He stresses that these durations were common but are not a standard. The right length depends on the learner's experience and on how often the skills are used. A fire fighter on a busy rescue unit may need less formal continuing education than a volunteer on an industrial rescue team. Initial training without ongoing practice lets rescuers forget the specialised techniques on which a technical rescue depends.[9]

Horizontal range bars of training hours for rope and confined space rescue at operations and technician level
Typical initial training durations for rope and confined space rescue in the United States around 2007. Wright stresses that these are common durations, not a standard.
Typical initial training for rope and confined space rescue, as described by R. Wright (2008)[27][12]
Discipline and level Typical duration Main content
Rope rescue, awareness About one day Size-up, resources, site management, general hazards, protective equipment
Rope rescue, operations Three days (24 to 30 hours) Knots, rigging, edge protection, anchors, belays, lowering, mechanical advantage, fixed-rope ascent and descent
Rope rescue, technician About one week (40 hours) Complex anchoring and rigging, high-line systems, passing knots, high angle techniques
Confined space, awareness Usually one day Size-up, contact with victims, hazards of non-entry rescue, site control, non-entry procedures
Confined space, operations Three to five days (24 to 40 hours) Rope systems for entry, atmospheric monitoring, packaging, entry rescue in simpler spaces
Confined space, technician Two to five days (16 to 40 hours) Changing conditions, medical surveillance, planned entry into hazardous spaces

For rope rescue, an awareness course for most rescuers can be completed in a single day, and a combined awareness and operations course is commonly given in a five-day format.[27] NFPA 1670 distinguishes two rope environments. In a high angle environment the load is supported mainly by the rope rescue system, while at low angle the load is supported mostly by itself. Organisations sometimes skip rope training because they have no high-rise buildings or mountains. A risk assessment may still reveal pits, channels or ravines from which victims must be lifted, which can demand the same or greater rope capability.[14]

Two sketches: a litter hanging free on a rope down a vertical face, and a litter resting on a gentle slope held by a rope
High angle and low angle rope rescue as defined in NFPA 1670: in high angle work the rope system carries most of the load, in low angle work the load carries mostly itself.

Confined space training at the operations level also covers protective measures for entrants, checks that entrants can cope physically and mentally with tight spaces, and the duties of each team role. It includes a method for passing victim information to emergency medical services when the patient is handed over. Operations-level training should be considered a prerequisite for the technician level.[12]

Acomb and LeBoeuf (2008) describe possible training props for technical rescue. A confined space prop could combine pipes, manholes, tanks and shipping containers, kept above grade as far as possible. Their example of a trench rescue prop uses parallel concrete retaining walls with soil between them, so that a real trench collapse cannot occur if trainees make mistakes. Their examples of collapse rescue props range from concrete cutting props to rubble piles that simulate fully collapsed buildings.[28]

Rescuers in helmets working inside a narrow trench whose walls are held by timber or hydraulic shoring
Trench rescue training: shoring holds the trench walls so that rescuers can work inside the excavation.

Large-scale and atypical rescues

In the United States around 2008, the urban search and rescue (USAR) system of the Federal Emergency Management Agency (FEMA) consisted of 28 locally based task forces. Their members had special search, rescue, engineering, communication and medical skills, and emergency shoring systems for damaged structures were being taught to the teams.[29] After Hurricane Katrina in 2005, several national USAR teams from Florida were sent to the Gulf Coast. Once an incident command post had been set up in Biloxi, Mississippi, their task was to search three coastal counties and three counties to the north.[30]

Some rescue methods are atypical for fire departments. Klaene and Sanders (2008) list interior stairs, fire escapes, aerial apparatus and ground ladders as the common rescue methods. Elevators, scaling ladders, ropes, helicopters, life nets and air bags are atypical and often expose rescuer and victim to extraordinary danger.[31] Successful helicopter rescues from roofs have rarely been performed, because roof structures and antennas hinder a close approach; during significant fires, thermal updrafts add another hazard.[32]

The MGM Grand Hotel fire in Las Vegas in November 1980 was the first US high-rise fire in which helicopters evacuated large numbers of people. About 300 people left by helicopter, while the fire department rescued about 900 by other means.[33]

The World Trade Center attack of 11 September 2001 illustrates these limits. The site's emergency preparedness manual contained no plan for roof rescue. New York police had nevertheless removed a small number of people by roof rescue during the 1993 bombing.[34] After that bombing, the New York fire department adopted an air support plan that treated roof evacuation by helicopter as hazardous, time-consuming and a last resort.[35] In 2001, heavy smoke prevented police helicopters from landing on the roof of the north tower. At 9:35 a.m. the police leadership ordered that no roof rescues be attempted, and at 9:43 a.m. that no one should rappel onto the towers.[36]

See also

Notes

  1. ↑ 1.0 1.1 R. Wright (2008), pp. 13-13–13-14.
  2. ↑ 2.0 2.1 2.2 2.3 2.4 R. Wright (2008), p. 13-13.
  3. ↑ 3.0 3.1 3.2 3.3 Teele (2008), p. 12-159.
  4. ↑ 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 R. Wright (2008), p. 13-14.
  5. ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 R. Wright (2008), p. 13-15.
  6. ↑ 6.0 6.1 Hall and Cote (2008), p. 3-27.
  7. ↑ Denlinger (2008), p. 12-55.
  8. ↑ Denlinger (2008), p. 12-64.
  9. ↑ 9.0 9.1 9.2 9.3 R. Wright (2008), p. 13-19.
  10. ↑ Laughlin (2008), p. 12-170.
  11. ↑ R. Wright (2008), pp. 13-14–13-15.
  12. ↑ 12.0 12.1 12.2 R. Wright (2008), p. 13-21.
  13. ↑ J. Moore (2008), pp. 20-173–20-174.
  14. ↑ 14.0 14.1 14.2 R. Wright (2008), p. 13-20.
  15. ↑ Corbett (2008), p. 12-136.
  16. ↑ Teele (2008), p. 12-150.
  17. ↑ Teele (2008), p. 12-154.
  18. ↑ 18.0 18.1 18.2 R. Wright (2008), p. 13-16.
  19. ↑ 19.0 19.1 R. Wright (2008), p. 13-18.
  20. ↑ R. Wright (2008), pp. 13-16–13-18.
  21. ↑ Jenaway (2008), p. 12-42.
  22. ↑ Jenaway (2008), p. 12-43.
  23. ↑ Denlinger (2008), p. 12-59.
  24. ↑ Kirtley (2008a), p. 12-309.
  25. ↑ Schmidt (2008), p. 1-145.
  26. ↑ Norman (2008), p. 12-301.
  27. ↑ 27.0 27.1 R. Wright (2008), pp. 13-19–13-20.
  28. ↑ Acomb and LeBoeuf (2008), p. 12-251.
  29. ↑ Pessiki (2008), p. 19-69.
  30. ↑ Penney (2008), p. 5-30.
  31. ↑ Klaene and Sanders (2008), p. 13-7.
  32. ↑ Lathrop (2008a), p. 4-77.
  33. ↑ Bryan (2008), p. 4-21.
  34. ↑ Lawson and Vettori (2005), p. 48.
  35. ↑ Lawson and Vettori (2005), p. 49.
  36. ↑ Lawson and Vettori (2005), pp. 51–53.

References

  • Acomb, D. J., & LeBoeuf, R. M. (2008). Fire rescue stations and fire service training centers. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-233–12-251). National Fire Protection Association.
  • Bryan, J. L. (2008). Human behavior and fire. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 4-3–4-47). National Fire Protection Association.
  • Corbett, G. P. (2008). Effect of building construction and fire protection systems on fire fighter safety. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-127–12-141). National Fire Protection Association.
  • Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
  • Hall, J. R., Jr., & Cote, A. E. (2008). An overview of the fire problem and fire protection. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 3-3–3-30). National Fire Protection Association.
  • Jenaway, W. F. (2008). Needs assessment and hazard analysis. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-41–12-50). National Fire Protection Association.
  • Kirtley, E. (2008a). Community risk reduction. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-309–12-315). National Fire Protection Association.
  • Klaene, B. J., & Sanders, R. (2008). Fireground operations. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-3–13-11). National Fire Protection Association.
  • Lathrop, J. K. (2008a). Concepts of egress design. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 4-69–4-91). National Fire Protection Association.
  • Laughlin, J. W. (2008). Training programs for fire and emergency service personnel. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-161–12-175). National Fire Protection Association.
  • Lawson, J. R., & Vettori, R. L. (2005). The emergency response operations (NIST NCSTAR 1-8). National Institute of Standards and Technology.
  • Moore, J. (2008). Storage occupancies. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 20-157–20-178). National Fire Protection Association.
  • Norman, J. (2008). Pre-Incident planning for emergency response. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-299–12-308). National Fire Protection Association.
  • Penney, G. (2008). Disaster preparedness education. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 5-29–5-43). National Fire Protection Association.
  • Pessiki, S. (2008). Analyzing structural fire damage. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 19-65–19-76). National Fire Protection Association.
  • Schmidt, D. L. (2008). Emergency management and business continuity. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-137–1-156). National Fire Protection Association.
  • Teele, B. W. (2008). Fire and emergency services protective clothing and protective equipment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-143–12-160). National Fire Protection Association.
  • Wright, R. (2008). Organizing rescue operations. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-13–13-21). National Fire Protection Association.