FSE wiki: fact-check corrections (written by Claude Opus 5.5) |
Wiki review: corrected 1 error: typo (Claude Opus 5.5) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 7: | Line 7: | ||
A JPR describes behaviour on the job, not in a classroom. Annex B of NFPA 1001 warns that the statements may resemble instructional objectives but should not be used for teaching as they stand. They must first be converted into objectives with behaviours, conditions and standards that can be measured in a learning environment.<ref name="Laughlin-12-167" /> The annex gives the example of a JPR that requires a fire fighter to "ventilate a pitched roof", which must be rewritten as a measurable instructional objective before the skill is taught.<ref name="Laughlin-12-167" /> For the same reason, Denlinger (2008) stresses that NFPA 1001 is a professional qualifications standard and not a training standard. Training should not be random but organised to prepare trainees for the performance testing that NFPA 1001 describes.<ref name="Denlinger-12-69" /> | A JPR describes behaviour on the job, not in a classroom. Annex B of NFPA 1001 warns that the statements may resemble instructional objectives but should not be used for teaching as they stand. They must first be converted into objectives with behaviours, conditions and standards that can be measured in a learning environment.<ref name="Laughlin-12-167" /> The annex gives the example of a JPR that requires a fire fighter to "ventilate a pitched roof", which must be rewritten as a measurable instructional objective before the skill is taught.<ref name="Laughlin-12-167" /> For the same reason, Denlinger (2008) stresses that NFPA 1001 is a professional qualifications standard and not a training standard. Training should not be random but organised to prepare trainees for the performance testing that NFPA 1001 describes.<ref name="Denlinger-12-69" /> | ||
[[File:fse-firefighter-professional-qualifications-v4.svg|thumb|upright=1.5|alt=Diagram converting the job performance requirement ventilate a pitched roof into an instructional objective with behaviour, conditions and standard|A job performance requirement states behaviour on the job; for teaching it is converted into an instructional objective with behaviour, conditions and a measurable standard.]] | |||
The standards have not always been limited to job skills. Medical requirements for fire fighters were originally part of NFPA 1001.<ref name="Loflin-12-115">Loflin (2008), p. 12-115.</ref> In 1988 the NFPA technical committees on occupational safety and health and on professional qualifications formed a working subcommittee to write a medical standard for both candidate and incumbent fire fighters.<ref name="Loflin-12-115-116">Loflin (2008), pp. 12-115–12-116.</ref> The first edition of that separate standard, NFPA 1582, was issued in 1992.<ref name="Loflin-12-115-116" /> | The standards have not always been limited to job skills. Medical requirements for fire fighters were originally part of NFPA 1001.<ref name="Loflin-12-115">Loflin (2008), p. 12-115.</ref> In 1988 the NFPA technical committees on occupational safety and health and on professional qualifications formed a working subcommittee to write a medical standard for both candidate and incumbent fire fighters.<ref name="Loflin-12-115-116">Loflin (2008), pp. 12-115–12-116.</ref> The first edition of that separate standard, NFPA 1582, was issued in 1992.<ref name="Loflin-12-115-116" /> | ||
| Line 16: | Line 17: | ||
The original concept was an interrelated set of standards in which each level of achievement built on the one below it. In the late 1980s the standards were changed so that each document stood on its own merits as a set of job performance requirements for a given field.<ref name="Denlinger-12-69" /> The strict career-ladder concept was abandoned, except for the progression from fire fighter to fire officer, and the later revisions made the documents easier to use outside the uniformed fire service.<ref name="Denlinger-12-69" /> In 1990 the NFPA took over full responsibility for appointing the committees and developing the standards. Its Standards Council appointed a Correlating Committee for Professional Qualifications Standards to coordinate the requirements of all the documents, and the chair of each technical committee sits on it.<ref name="Denlinger-12-69" /> | The original concept was an interrelated set of standards in which each level of achievement built on the one below it. In the late 1980s the standards were changed so that each document stood on its own merits as a set of job performance requirements for a given field.<ref name="Denlinger-12-69" /> The strict career-ladder concept was abandoned, except for the progression from fire fighter to fire officer, and the later revisions made the documents easier to use outside the uniformed fire service.<ref name="Denlinger-12-69" /> In 1990 the NFPA took over full responsibility for appointing the committees and developing the standards. Its Standards Council appointed a Correlating Committee for Professional Qualifications Standards to coordinate the requirements of all the documents, and the chair of each technical committee sits on it.<ref name="Denlinger-12-69" /> | ||
[[File:fse-firefighter-professional-qualifications-v2.svg|thumb|upright=1.5|alt=Timeline from 1966 to 1999 of the development of US fire service professional qualifications standards|Milestones of the US fire service professional qualifications system, 1966–1999.]] | |||
State fire training agencies began to rely increasingly on the NFPA professional qualifications standards from the 1980s onwards.<ref name="Laughlin-12-169" /> Laughlin (2008) notes that a national standard was an idea that state political leaders could understand and support. Its use was accompanied by a rise in the funding and importance of state certification authority and national accreditation.<ref name="Laughlin-12-169" /> By 2008, the core of most state fire training agencies consisted of formal courses based on national standards rather than on state or individual preferences.<ref name="Laughlin-12-169" /> | State fire training agencies began to rely increasingly on the NFPA professional qualifications standards from the 1980s onwards.<ref name="Laughlin-12-169" /> Laughlin (2008) notes that a national standard was an idea that state political leaders could understand and support. Its use was accompanied by a rise in the funding and importance of state certification authority and national accreditation.<ref name="Laughlin-12-169" /> By 2008, the core of most state fire training agencies consisted of formal courses based on national standards rather than on state or individual preferences.<ref name="Laughlin-12-169" /> | ||
| Line 75: | Line 77: | ||
Accreditation adds a further check by evaluating the certifiers themselves.<ref name="Laughlin-12-170" /> The best assurance that a state programme meets the national standard comes when an independent [[Third-party certification|third-party]] organisation evaluates its actions. Such an evaluation is meant to ensure quality and eliminate politics or favouritism.<ref name="Laughlin-12-170" /> | Accreditation adds a further check by evaluating the certifiers themselves.<ref name="Laughlin-12-170" /> The best assurance that a state programme meets the national standard comes when an independent [[Third-party certification|third-party]] organisation evaluates its actions. Such an evaluation is meant to ensure quality and eliminate politics or favouritism.<ref name="Laughlin-12-170" /> | ||
[[File:fse-firefighter-professional-qualifications-v1.svg|thumb|upright=1.5|alt=Flow diagram from NFPA standard via training, testing and state certification to third-party accreditation by Pro Board and IFSAC|From standard to accredited certification in the United States fire service, as described in 2008.]] | |||
The first national accrediting body, set up by the JCNFSO, was the National Board on Fire Service Professional Qualifications, known as the Pro Board. A later body, IFSAC, grew out of Oklahoma State University, and both evaluated state fire training courses against the same NFPA standards.<ref name="Laughlin-12-170" /> Denlinger (2008) adds that the NPQB, under the leadership of the National Board on Fire Service Professional Qualifications, had become a third-party accreditor and the developer of a national registry of those certified. The Center for Public Safety Excellence offered accreditation to fire service agencies and to chief fire officers.<ref name="Denlinger-12-69" /> | The first national accrediting body, set up by the JCNFSO, was the National Board on Fire Service Professional Qualifications, known as the Pro Board. A later body, IFSAC, grew out of Oklahoma State University, and both evaluated state fire training courses against the same NFPA standards.<ref name="Laughlin-12-170" /> Denlinger (2008) adds that the NPQB, under the leadership of the National Board on Fire Service Professional Qualifications, had become a third-party accreditor and the developer of a national registry of those certified. The Center for Public Safety Excellence offered accreditation to fire service agencies and to chief fire officers.<ref name="Denlinger-12-69" /> | ||
| Line 87: | Line 90: | ||
Qualifications shape a fire fighter's career from entry onwards. Denlinger (2008) gives fire department management three recruitment responsibilities: to develop and apply hiring standards, and to provide the basic training that recruits need. The third is to certify that newly trained fire fighters are ready for permanent appointment, or to recommend ending the service of those who cannot perform satisfactorily.<ref name="Denlinger-12-68">Denlinger (2008), p. 12-68.</ref> Many states had commissions on fire fighter standards that required all fire department employees to complete basic training before permanent employment. Many had also adopted, or were adopting, minimum fire fighter qualifications standards.<ref name="Denlinger-12-68" /> Fire fighter training itself was mandated in some states and voluntary in others.<ref name="Laughlin-12-169" /> | Qualifications shape a fire fighter's career from entry onwards. Denlinger (2008) gives fire department management three recruitment responsibilities: to develop and apply hiring standards, and to provide the basic training that recruits need. The third is to certify that newly trained fire fighters are ready for permanent appointment, or to recommend ending the service of those who cannot perform satisfactorily.<ref name="Denlinger-12-68">Denlinger (2008), p. 12-68.</ref> Many states had commissions on fire fighter standards that required all fire department employees to complete basic training before permanent employment. Many had also adopted, or were adopting, minimum fire fighter qualifications standards.<ref name="Denlinger-12-68" /> Fire fighter training itself was mandated in some states and voluntary in others.<ref name="Laughlin-12-169" /> | ||
Entry testing must follow recognised standards and all applicable laws.<ref name="Denlinger-12-69" /> US courts ruled that height and other arbitrary requirements are discriminatory. Discrimination against people with a disability also violates US federal law, but candidates may be required to show that they can perform the bona fide duties of the job. Departments must therefore define and validate the "essential functions" of each position.<ref name="Denlinger-12-69" /> A physical performance test for candidates was developed by ten North American cities with the assistance of the US Department of Justice. It was introduced in 1999 as the Candidate | Entry testing must follow recognised standards and all applicable laws.<ref name="Denlinger-12-69" /> US courts ruled that height and other arbitrary requirements are discriminatory. Discrimination against people with a disability also violates US federal law, but candidates may be required to show that they can perform the bona fide duties of the job. Departments must therefore define and validate the "essential functions" of each position.<ref name="Denlinger-12-69" /> A physical performance test for candidates was developed by ten North American cities with the assistance of the US Department of Justice. It was introduced in 1999 as the Candidate Physical Ability Test (CPAT), and each municipality that uses it must validate it with its own job task analysis.<ref name="Loflin-12-117">Loflin (2008), p. 12-117.</ref> | ||
The training that follows is built around the standards. Most state fire training agencies and progressive fire departments used NFPA 1001 to develop their recruit training courses.<ref name="Laughlin-12-167" /> Laughlin (2008) argues that basic recruit training should be the same for every fire fighter. A fire in one room of a one-storey home requires the same skills in a career or volunteer, suburban or rural department.<ref name="Laughlin-12-167" /> | The training that follows is built around the standards. Most state fire training agencies and progressive fire departments used NFPA 1001 to develop their recruit training courses.<ref name="Laughlin-12-167" /> Laughlin (2008) argues that basic recruit training should be the same for every fire fighter. A fire in one room of a one-storey home requires the same skills in a career or volunteer, suburban or rural department.<ref name="Laughlin-12-167" /> | ||
Training centres use burn buildings to teach the skills required by NFPA 1001, especially those that need [[Live fire training|live fire training]] scenarios.<ref name="AcombLeBoeuf-12-247">Acomb and LeBoeuf (2008), p. 12-247.</ref> The International Fire Service Training Association (IFSTA) offered computer-based training in basic fire fighter skills in accordance with NFPA 1001.<ref name="Duggan-12-95">Duggan (2008), p. 12-95.</ref> In this sense [[ | Training centres use burn buildings to teach the skills required by NFPA 1001, especially those that need [[Live fire training|live fire training]] scenarios.<ref name="AcombLeBoeuf-12-247">Acomb and LeBoeuf (2008), p. 12-247.</ref> The International Fire Service Training Association (IFSTA) offered computer-based training in basic fire fighter skills in accordance with NFPA 1001.<ref name="Duggan-12-95">Duggan (2008), p. 12-95.</ref> In this sense [[fire service training]] is the means by which members acquire the skills and knowledge that the job performance requirements set out.<ref name="Denlinger-12-69" /> | ||
Above entry level, NFPA 1021 sets the levels of performance for fire officers.<ref name="Denlinger-12-70" /> Many departments added educational requirements, such as community college fire science certificates, or bachelor's degrees for chief officers. Many jurisdictions also required completion of the National Fire Academy's Executive Fire Officer programme for the chief executive officer.<ref name="Denlinger-12-70" /> Where the law permitted, departments increasingly used assessment centres, in which a trained team scores candidates on problem-solving exercises, role-playing, prioritising tasks and incident simulations.<ref name="Denlinger-12-70" /> Some college degree programmes gave credit for accredited state certifications or included Fire Officer III and IV courses in the curriculum.<ref name="Laughlin-12-171">Laughlin (2008), p. 12-171.</ref> | Above entry level, NFPA 1021 sets the levels of performance for fire officers.<ref name="Denlinger-12-70" /> Many departments added educational requirements, such as community college fire science certificates, or bachelor's degrees for chief officers. Many jurisdictions also required completion of the National Fire Academy's Executive Fire Officer programme for the chief executive officer.<ref name="Denlinger-12-70" /> Where the law permitted, departments increasingly used assessment centres, in which a trained team scores candidates on problem-solving exercises, role-playing, prioritising tasks and incident simulations.<ref name="Denlinger-12-70" /> Some college degree programmes gave credit for accredited state certifications or included Fire Officer III and IV courses in the curriculum.<ref name="Laughlin-12-171">Laughlin (2008), p. 12-171.</ref> | ||
| Line 99: | Line 102: | ||
== Limits and gaps == | == Limits and gaps == | ||
A qualifications system works only where it is applied, and national needs assessments of the US fire service showed large gaps. In the second needs assessment, published in 2006, an estimated 53 percent of departments involved in structural firefighting had not formally trained all the fire fighters involved in those duties.<ref name="Jenaway-12-42">Jenaway (2008), p. 12-42.</ref><ref name="Jenaway-12-50">Jenaway (2008), p. 12-50.</ref> The corresponding shares were 36 percent for emergency medical services, 36 percent for hazardous materials response, 63 percent for wildland firefighting and 50 percent for technical rescue.<ref name="Jenaway-12-42" /> Except for technical rescue, the shares were higher in rural communities of fewer than 2,500 people, where nearly all departments are all-volunteer.<ref name="Jenaway-12-42" /> Smalley (2008) reports that the first national needs assessment, published in 2002, showed "30 to 50 percent of uncertified and untrained structural fire fighters" serving communities of 2,500 or less.<ref name="Smalley-13-73-74">Smalley (2008), pp. 13-73–13-74.</ref><ref name="Jenaway-12-50" /> | A qualifications system works only where it is applied, and national needs assessments of the US fire service showed large gaps. In the second needs assessment, published in 2006, an estimated 53 percent of departments involved in structural firefighting had not formally trained all the fire fighters involved in those duties.<ref name="Jenaway-12-42">Jenaway (2008), p. 12-42.</ref><ref name="Jenaway-12-50">Jenaway (2008), p. 12-50.</ref> The corresponding shares were 36 percent for emergency medical services, 36 percent for hazardous materials response, 63 percent for wildland firefighting and 50 percent for technical rescue.<ref name="Jenaway-12-42" /> Except for technical rescue, the shares were higher in rural communities of fewer than 2,500 people, where nearly all departments are all-volunteer.<ref name="Jenaway-12-42" /> Smalley (2008) reports that the first national needs assessment, published in 2002, showed "30 to 50 percent of uncertified and untrained structural fire fighters" serving communities of 2,500 or less.<ref name="Smalley-13-73-74">Smalley (2008), pp. 13-73–13-74.</ref><ref name="Jenaway-12-50" /> | ||
[[File:fse-firefighter-professional-qualifications-v3.svg|thumb|upright=1.5|alt=Bar chart of the share of US fire departments that had not formally trained all involved fire fighters, by duty, 2006 study|Estimated share of US fire departments involved in each duty that had not formally trained all fire fighters involved in it (second needs assessment, 2006).]] | |||
The standards also have built-in limits. The JPRs are minimum requirements for each level.<ref name="Denlinger-12-69" /> The existence of standards and testing procedures does not by itself ensure that all personnel reach the required level of competency.<ref name="Denlinger-12-69" /> Some training sits outside the system altogether. For-profit training companies often do not claim to address a national standard fully and may lack independent third-party accreditation. A department that contracts such training must therefore make an extra effort to establish what it needs and what quality can be delivered.<ref name="Laughlin-12-172" /> | The standards also have built-in limits. The JPRs are minimum requirements for each level.<ref name="Denlinger-12-69" /> The existence of standards and testing procedures does not by itself ensure that all personnel reach the required level of competency.<ref name="Denlinger-12-69" /> Some training sits outside the system altogether. For-profit training companies often do not claim to address a national standard fully and may lack independent third-party accreditation. A department that contracts such training must therefore make an extra effort to establish what it needs and what quality can be delivered.<ref name="Laughlin-12-172" /> | ||
Latest revision as of 00:44, 16 November 2026
Firefighter professional qualifications are the minimum job performance requirements that a person must demonstrate to be recognised as competent for a defined fire service job at a given level.[1] Examples of such jobs in firefighting and related work are fire fighter, fire officer and fire service instructor. In the United States these requirements are written in a family of voluntary consensus standards of the National Fire Protection Association (NFPA).[2] NFPA 1001, Standard for Fire Fighter Professional Qualifications, is the recognised standard of performance for fire fighters whose duties are mainly related to structural fires.[3] Each standard defines levels of progression, and the requirements at each level are minimums that any public or private fire service organisation can use to judge whether a person has the necessary knowledge and skills.[1] A professional qualifications standard is not a training standard: it states what must be demonstrated, and a training programme is needed to prepare people to meet it.[1]
Competence against the standards is confirmed by certification, for example by a state fire training agency. The certifiers themselves can be accredited by independent bodies such as the Pro Board and the International Fire Service Accreditation Congress (IFSAC).[4] The system grew out of concerns in the late 1960s about uneven training, and its structure, as described in 2008, was set up between 1971 and 1990.[5][6]
Job performance requirements
The basic unit of a professional qualifications standard is the job performance requirement (JPR). NFPA 1001 describes the minimum JPRs for fire fighters in four duty areas: communications; fireground operations; rescue operations; and prevention, preparedness and maintenance.[3] For the recruit fire fighter, Laughlin (2008) counts 19 listed JPRs in the duty area of fireground operations alone, each with its related requisite knowledge and skills.[3] The aim of the NFPA committees, as described by Denlinger (2008), was to write clear and concise requirements. These can be used to determine whether individuals possess the skills and knowledge needed for the duties and tasks of the job.[1]
A JPR describes behaviour on the job, not in a classroom. Annex B of NFPA 1001 warns that the statements may resemble instructional objectives but should not be used for teaching as they stand. They must first be converted into objectives with behaviours, conditions and standards that can be measured in a learning environment.[3] The annex gives the example of a JPR that requires a fire fighter to "ventilate a pitched roof", which must be rewritten as a measurable instructional objective before the skill is taught.[3] For the same reason, Denlinger (2008) stresses that NFPA 1001 is a professional qualifications standard and not a training standard. Training should not be random but organised to prepare trainees for the performance testing that NFPA 1001 describes.[1]
The standards have not always been limited to job skills. Medical requirements for fire fighters were originally part of NFPA 1001.[7] In 1988 the NFPA technical committees on occupational safety and health and on professional qualifications formed a working subcommittee to write a medical standard for both candidate and incumbent fire fighters.[8] The first edition of that separate standard, NFPA 1582, was issued in 1992.[8]
Development of the standards
In the earliest state training programmes in the United States, quality depended heavily on individual instructors. Their instructors, many of them retired fire fighters from larger cities, commonly travelled around a state to train rural departments; the training was informal and its quality varied.[5] In the late 1960s fire service leaders expressed concerns about the adequacy and inconsistency of fire department training more forcefully. These concerns led to calls for performance standards for acceptable levels of training and professionalism.[5] One message of the influential Wingspread fire service meeting of 1966 was "Professionalism begins with education", and NFPA 1041 reflected it when it was first developed.[9]
In 1971 the Joint Council of National Fire Service Organizations (JCNFSO) created the National Professional Qualifications Board for the Fire Service (NPQB). Its task was to facilitate the development of nationally applicable performance standards for the levels of responsibility within the uniformed fire service.[6] On 14 December 1972 the board set up four technical committees for the fire fighter, the fire officer, the fire service instructor, and the fire inspector and investigator.[1] From the start, these committees wrote their documents through the NFPA standards development process.[1] Laughlin (2008) dates the creation of the National Professional Qualifications System to 1972.[4]
The original concept was an interrelated set of standards in which each level of achievement built on the one below it. In the late 1980s the standards were changed so that each document stood on its own merits as a set of job performance requirements for a given field.[1] The strict career-ladder concept was abandoned, except for the progression from fire fighter to fire officer, and the later revisions made the documents easier to use outside the uniformed fire service.[1] In 1990 the NFPA took over full responsibility for appointing the committees and developing the standards. Its Standards Council appointed a Correlating Committee for Professional Qualifications Standards to coordinate the requirements of all the documents, and the chair of each technical committee sits on it.[1]
State fire training agencies began to rely increasingly on the NFPA professional qualifications standards from the 1980s onwards.[5] Laughlin (2008) notes that a national standard was an idea that state political leaders could understand and support. Its use was accompanied by a rise in the funding and importance of state certification authority and national accreditation.[5] By 2008, the core of most state fire training agencies consisted of formal courses based on national standards rather than on state or individual preferences.[5]
Standards and levels
By the time of the 2008 handbook the professional qualifications project covered a wide range of fire service jobs. Farr and Sawyer (2008) refer to 15 professional qualifications standards for fire service career positions, which were the responsibility of the NFPA Professional Qualifications Correlating Committee.[10] The table lists the 15 standards that Laughlin (2008) gives as the basis for accredited certification, with their levels.[4] Denlinger (2008) also lists NFPA 1000 on accreditation and certification systems, NFPA 1005 on marine firefighting for land-based fire fighters, and NFPA 1037 for the fire marshal among the documents then in progress.[1]
| Standard | Job | Levels or specialities |
|---|---|---|
| NFPA 472 | Responder to hazardous materials incidents | Awareness, Operational, Technician, Incident Commander |
| NFPA 1001 | Fire fighter | Fire Fighter I, II |
| NFPA 1002 | Fire apparatus driver/operator | Pumper, Aerial, Tiller, Wildland, Airport Rescue and Firefighting, Mobile Water Supply Apparatus |
| NFPA 1003 | Airport fire fighter | Airport Fire Fighter |
| NFPA 1006 | Rescue technician | Technician level for rope, surface water, vehicle and machinery, confined space, structural collapse, trench, subterranean, dive and wilderness rescue |
| NFPA 1021 | Fire officer | Fire Officer I, II, III, IV |
| NFPA 1031 | Fire inspector and plan examiner | Fire Inspector I, II, III; Plan Examiner I, II |
| NFPA 1033 | Fire investigator | Fire Investigator |
| NFPA 1035 | Public fire and life safety educator | Educator I, II, III; Public Information Officer; Juvenile Firesetter Intervention Specialist I, II |
| NFPA 1041 | Fire service instructor | Instructor I, II, III |
| NFPA 1051 | Wildland fire fighter | Wildland Fire Fighter I, II; Wildland Fire Officer I, II; Wildland/Urban Interface Protection Specialist, Coordinator |
| NFPA 1061 | Public safety telecommunicator | Telecommunicator I, II |
| NFPA 1071 | Emergency vehicle technician | Emergency Vehicle Technician I, II, III |
| NFPA 1081 | Industrial fire brigade member | Incipient industrial, advanced exterior industrial, interior structural industrial, industrial fire brigade leader |
| NFPA 1521 | Fire department safety officer | Health and Safety Officer, Incident Safety Officer |
The standards differ in how they structure their levels. NFPA 1021 is written in performance terms and requires a fire officer to demonstrate competence by both knowledge and performance.[11] NFPA 1041 defines three instructor levels.[12] A Level I instructor can deliver instruction effectively from a prepared lesson plan and adapt it to the students. A Level II instructor can also develop lesson plans, schedule training sessions and supervise other instructors. A Level III instructor can develop complete curricula and programmes, conduct needs analyses and set training goals.[12]
NFPA 1006, for rescue technicians, had only one level of capability, the technician. It used a "core plus one" approach: a candidate completes the core JPRs common to all technical rescue disciplines plus those of the chosen discipline.[13] The core covers site operations, victim management, the care of protective equipment and tools, and ropes and rigging.[13] NFPA 1006 applies to individuals, whereas NFPA 1670 applies to organisations.[13]
Several jobs combine a qualifications standard with other requirements. In the United States, each airport must develop its own training programme for aircraft rescue and firefighting (ARFF) fire fighters. This programme should meet NFPA 1003 and NFPA 405, Standard for the Recurring Proficiency of Airport Fire Fighters.[14]
NFPA 1081 specifies a core set of JPRs for industrial fire brigade members as well as site-specific requirements.[15] Merklinger (2008) recommends that the authority having jurisdiction require call takers and dispatchers to be certified as meeting NFPA 1061.[16] For wildland incidents, the National Interagency Incident Management System (NIIMS) had its own qualification and certification system. This system gives personnel across the nation standard training, experience and physical requirements for specific positions in the incident command system.[17]
The handbook is not fully consistent on the number of levels. Laughlin (2008) lists three accredited levels of emergency vehicle technician under NFPA 1071, whereas Tutterow (2008) states that NFPA 1071 prescribes two levels of competency.[4][18] Editions also matter. A 2004 report of the US Nuclear Regulatory Commission listed the 2002 edition of NFPA 1001, the 1997 edition of NFPA 1021 and the 2002 edition of NFPA 1041 as current.[19] The same report notes that NFPA standards are revised on cycles of three to five years.[20]
Certification and accreditation
Certification is the step that turns a standard into a recognised personal qualification. Laughlin (2008) describes it as a written assurance to the student, the sponsoring fire chief and the home community that the student conforms to specified requirements.[5] He distinguishes three kinds of certificate with increasing credibility.[21]
A certificate of attendance shows only that the student was present. It involves no measurement of learning and should at least state the length of attendance.[5] A certificate of completion follows an examination of some kind. Its value depends on how completion was defined and on the authority of the agency that issued it.[21]
Certification to national standards carries additional credibility. Ideally, it is a written assurance that a recognised national standard of performance has been met, based on successful completion of a test built on that standard.[4] The tests are criterion-referenced: they measure what a person has learned against a defined body of knowledge. This can be done with multiple-choice or fill-in questions, a demonstration, or performance of the skill.[22] Because failing a certification test can have serious consequences, the accuracy and validity of the examination matter. State fire training agencies have the means to check the accuracy of their tests statistically.[22]
Accreditation adds a further check by evaluating the certifiers themselves.[4] The best assurance that a state programme meets the national standard comes when an independent third-party organisation evaluates its actions. Such an evaluation is meant to ensure quality and eliminate politics or favouritism.[4]
The first national accrediting body, set up by the JCNFSO, was the National Board on Fire Service Professional Qualifications, known as the Pro Board. A later body, IFSAC, grew out of Oklahoma State University, and both evaluated state fire training courses against the same NFPA standards.[4] Denlinger (2008) adds that the NPQB, under the leadership of the National Board on Fire Service Professional Qualifications, had become a third-party accreditor and the developer of a national registry of those certified. The Center for Public Safety Excellence offered accreditation to fire service agencies and to chief fire officers.[1]
Laughlin (2008) illustrates the chain with a fire investigator. A student certified by an accredited state agency has passed tests of the knowledge and skills specified in NFPA 1033, Standard for Professional Qualifications for Fire Investigator. The state certifier, in turn, has been checked by the Pro Board and IFSAC and confirmed as assessing competence properly.[4]
The same model applied to fire prevention staff. Certification to the levels of NFPA 1031, 1033, 1035 and 1037 was achieved through agencies with third-party accreditation. The NFPA itself ran a national certification programme for Fire Inspector I and II and Fire Plan Examiner I.[23] Many states had their own certification programme, required a national certification, or certified individuals to a nationally recognised standard.[23]
Certification does not replace experience. Laughlin (2008) accepts that an experienced fire service instructor can be competent without formal certification. Certification, however, ensures that the competence has been evaluated by more than one person, and the best combination is experience plus certification to the national standard.[24] National Fire Academy superintendent Denis Onieal went further. He proposed one national system that would integrate training, standardised education, independent assessment of skills through the Pro Board and IFSAC, and broader reciprocity between systems.[25]
Use in recruitment, training and promotion
Qualifications shape a fire fighter's career from entry onwards. Denlinger (2008) gives fire department management three recruitment responsibilities: to develop and apply hiring standards, and to provide the basic training that recruits need. The third is to certify that newly trained fire fighters are ready for permanent appointment, or to recommend ending the service of those who cannot perform satisfactorily.[26] Many states had commissions on fire fighter standards that required all fire department employees to complete basic training before permanent employment. Many had also adopted, or were adopting, minimum fire fighter qualifications standards.[26] Fire fighter training itself was mandated in some states and voluntary in others.[5]
Entry testing must follow recognised standards and all applicable laws.[1] US courts ruled that height and other arbitrary requirements are discriminatory. Discrimination against people with a disability also violates US federal law, but candidates may be required to show that they can perform the bona fide duties of the job. Departments must therefore define and validate the "essential functions" of each position.[1] A physical performance test for candidates was developed by ten North American cities with the assistance of the US Department of Justice. It was introduced in 1999 as the Candidate Physical Ability Test (CPAT), and each municipality that uses it must validate it with its own job task analysis.[27]
The training that follows is built around the standards. Most state fire training agencies and progressive fire departments used NFPA 1001 to develop their recruit training courses.[3] Laughlin (2008) argues that basic recruit training should be the same for every fire fighter. A fire in one room of a one-storey home requires the same skills in a career or volunteer, suburban or rural department.[3]
Training centres use burn buildings to teach the skills required by NFPA 1001, especially those that need live fire training scenarios.[28] The International Fire Service Training Association (IFSTA) offered computer-based training in basic fire fighter skills in accordance with NFPA 1001.[29] In this sense fire service training is the means by which members acquire the skills and knowledge that the job performance requirements set out.[1]
Above entry level, NFPA 1021 sets the levels of performance for fire officers.[11] Many departments added educational requirements, such as community college fire science certificates, or bachelor's degrees for chief officers. Many jurisdictions also required completion of the National Fire Academy's Executive Fire Officer programme for the chief executive officer.[11] Where the law permitted, departments increasingly used assessment centres, in which a trained team scores candidates on problem-solving exercises, role-playing, prioritising tasks and incident simulations.[11] Some college degree programmes gave credit for accredited state certifications or included Fire Officer III and IV courses in the curriculum.[30]
Technology was changing how qualifications were tested. Duggan (2008) notes that a fire fighter who must attain a specified performance level can be tested periodically through an Internet-based examination, although this raises some security issues that were being overcome.[29] A state fire training agency had already run an accredited Fire Officer I certification course online. Laughlin (2008) adds, however, that a fire fighter course with many skill requirements may never be feasible online.[30]
Limits and gaps
A qualifications system works only where it is applied, and national needs assessments of the US fire service showed large gaps. In the second needs assessment, published in 2006, an estimated 53 percent of departments involved in structural firefighting had not formally trained all the fire fighters involved in those duties.[31][32] The corresponding shares were 36 percent for emergency medical services, 36 percent for hazardous materials response, 63 percent for wildland firefighting and 50 percent for technical rescue.[31] Except for technical rescue, the shares were higher in rural communities of fewer than 2,500 people, where nearly all departments are all-volunteer.[31] Smalley (2008) reports that the first national needs assessment, published in 2002, showed "30 to 50 percent of uncertified and untrained structural fire fighters" serving communities of 2,500 or less.[33][32]
The standards also have built-in limits. The JPRs are minimum requirements for each level.[1] The existence of standards and testing procedures does not by itself ensure that all personnel reach the required level of competency.[1] Some training sits outside the system altogether. For-profit training companies often do not claim to address a national standard fully and may lack independent third-party accreditation. A department that contracts such training must therefore make an extra effort to establish what it needs and what quality can be delivered.[2]
Some building and risk documents refer to firefighter training explicitly. In New Zealand, Building Code clause C5.6 is reproduced in Verification Method C/VM2 (second edition, 2025) for the design scenario on firefighting operations. It requires buildings to allow firefighters to reach the floor of fire origin, search the general area of fire origin and protect their means of egress. The clause takes into account the firefighters' personal protective equipment and standard training.[34]
Quantitative risk methods do not always distinguish levels of training. The fire risk method of NUREG/CR-6850 (2005), written for US nuclear power plants, does not consider plant-to-plant variability in fire brigade training and capability. Its manual firefighting model rests on generic, industry-wide average statistics, so it is not designed to assess the risk benefit of enhanced hands-on training of brigade personnel.[35]
See also
- Fire department organisation
- NFPA 1500
- Industrial fire brigade
- Aircraft rescue and firefighting
- Technical rescue
- Incident safety officer
Notes
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 Denlinger (2008), p. 12-69.
- ↑ 2.0 2.1 Laughlin (2008), p. 12-172.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 Laughlin (2008), p. 12-167.
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 Laughlin (2008), p. 12-170.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 Laughlin (2008), p. 12-169.
- ↑ 6.0 6.1 Denlinger (2008), pp. 12-68–12-69.
- ↑ Loflin (2008), p. 12-115.
- ↑ 8.0 8.1 Loflin (2008), pp. 12-115–12-116.
- ↑ Laughlin (2008), p. 12-164.
- ↑ Farr and Sawyer (2008), p. 1-83.
- ↑ 11.0 11.1 11.2 11.3 Denlinger (2008), p. 12-70.
- ↑ 12.0 12.1 Laughlin (2008), pp. 12-164–12-165.
- ↑ 13.0 13.1 13.2 R. Wright (2008), p. 13-15.
- ↑ Kreckie (2008), p. 13-107.
- ↑ Snyder (2008), p. 12-194.
- ↑ Merklinger (2008), p. 12-260.
- ↑ Loflin (2008), p. 12-119.
- ↑ Tutterow (2008), p. 12-283.
- ↑ Iqbal and Salley (2004), p. E-10.
- ↑ Iqbal and Salley (2004), p. E-1.
- ↑ 21.0 21.1 Laughlin (2008), pp. 12-169–12-170.
- ↑ 22.0 22.1 Laughlin (2008), p. 12-166.
- ↑ 23.0 23.1 Farr and Sawyer (2008), pp. 1-83–1-84.
- ↑ Laughlin (2008), p. 12-165.
- ↑ Onieal (2003), as cited in Laughlin (2008), pp. 12-166–12-167.
- ↑ 26.0 26.1 Denlinger (2008), p. 12-68.
- ↑ Loflin (2008), p. 12-117.
- ↑ Acomb and LeBoeuf (2008), p. 12-247.
- ↑ 29.0 29.1 Duggan (2008), p. 12-95.
- ↑ 30.0 30.1 Laughlin (2008), p. 12-171.
- ↑ 31.0 31.1 31.2 Jenaway (2008), p. 12-42.
- ↑ 32.0 32.1 Jenaway (2008), p. 12-50.
- ↑ Smalley (2008), pp. 13-73–13-74.
- ↑ Ministry of Business, Innovation and Employment (2025b), p. 53.
- ↑ Nowlen et al. (2005a), p. 3-15.
References
- Acomb, D. J., & LeBoeuf, R. M. (2008). Fire rescue stations and fire service training centers. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-233–12-251). National Fire Protection Association.
- Denlinger, R. F. (2008). Managing fire-rescue departments. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-51–12-78). National Fire Protection Association.
- Duggan, B. P. (2008). Information management and computer technology. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-79–12-97). National Fire Protection Association.
- Farr, R. R., & Sawyer, S. F. (2008). Fire prevention and code enforcement. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 1-81–1-93). National Fire Protection Association.
- Iqbal, N., & Salley, M. H. (2004). Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.
- Jenaway, W. F. (2008). Needs assessment and hazard analysis. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-41–12-50). National Fire Protection Association.
- Kreckie, J. (2008). Aircraft rescue and fire fighting (ARFF). In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-99–13-115). National Fire Protection Association.
- Laughlin, J. W. (2008). Training programs for fire and emergency service personnel. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-161–12-175). National Fire Protection Association.
- Loflin, M. E. (2008). Safety, medical, and health issues and programs. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-107–12-125). National Fire Protection Association.
- Merklinger, J. M. (2008). Public emergency services alarm, dispatch, and communications systems. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-253–12-266). National Fire Protection Association.
- Ministry of Business, Innovation and Employment. (2025b). Verification Method C/VM2: Framework for fire safety design (2nd ed.).
- Nowlen, S. P., Najafi, B., Wyant, F. J., Forester, J., Kazarians, M., Kolaczkowski, A., Joglar, F., Funk, D., Hannaman, G., & Anoba, R. (2005a). EPRI/NRC-RES fire PRA methodology for nuclear power facilities: Vol. 1. Summary and overview (NUREG/CR-6850; EPRI 1011989). Electric Power Research Institute; U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research.
- Smalley, J. C. (2008). Wildland fire management. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-53–13-79). National Fire Protection Association.
- Snyder, M. (2008). Industrial fire loss prevention. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-177–12-198). National Fire Protection Association.
- Tutterow, R. (2008). Fire department apparatus and equipment. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 12-267–12-287). National Fire Protection Association.
- Wright, R. (2008). Organizing rescue operations. In A. E. Cote, C. C. Grant, J. R. Hall, Jr., & R. E. Solomon (Eds.), Fire protection handbook (20th ed., pp. 13-13–13-21). National Fire Protection Association.