File:Fse-hot-gas-layer-v2.svg: Difference between revisions

Latest revision as of 15:53, 2 November 2026

Layer interface and neutral plane are related but not identical. Based on Australian Building Codes Board et al. (2005), p. 2.5-6.

Diagram for the article Hot gas layer (Fire Safety Academy wiki, level 1 Basic).

Source basis: Australian Building Codes Board et al. (2005), p. 2.5-6
Alt text: Smoke interface and neutral plane at different heights with hot outflow and cool inflow.

New drawing by Fire Safety Academy. © Fire Safety Academy.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	15:53, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Watermark: Fire Safety Academy logo icon, 70 px, 45 % opacity
	08:56, 2 November 2026	900 × 600 (5 KB)	Sanne (talk \| contribs)	Add modest Fire Safety Academy logo-icon watermark
	08:17, 2 November 2026	900 × 600 (3 KB)	Sanne (talk \| contribs)	Upload fse-hot-gas-layer-v2.svg: diagram for Hot gas layer (level-1 visual plan V2)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	Smoke interface and neutral plane at different heights with hot outflow and cool inflow.
Image title	Cross-section of a fire room and its doorway. Inside, a dashed smoke-layer interface separates the hot smoke layer from cooler air below. A separate dash-dot line across the doorway, at a different height, marks the neutral plane where the flow through the opening changes direction: hot outflow leaves above it and cool inflow enters below it. A note says the two heights vary and are close but not identical.
Width	900
Height	600

Revision as of 08:17, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Upload fse-hot-gas-layer-v2.svg: diagram for Hot gas layer (level-1 visual plan V2)	Latest revision as of 15:53, 2 November 2026 view source Sanne (talk \| contribs) Bots 337 edits Sanne uploaded a new version of File:Fse-hot-gas-layer-v2.svg
(One intermediate revision by the same user not shown)
(No difference)