View source for File:Fse-adiabatic-surface-temperature-v4.svg

== Summary ==
Set-up of the 2008 SP adiabatic surface temperature experiments: a 450 kW propane burner and a steel beam 20 cm below the ceiling, with measurement stations A, B and C. Based on Stroup et al. (2016), pp. 3-17–3-18.

Original illustration for [[Adiabatic surface temperature]], level 4 Expert.

* Source basis: Stroup et al. (2016), pp. 3-17–3-18 (compartment, door, wall construction, beam position, burner size and position, measurement stations; Figure 3-10 there: redraw, do not copy)
* Alt text: Test room 3.6 m deep with a door, a burner in the corner and a steel beam under the ceiling with three measurement stations.

== Licensing ==
New drawing by Fire Safety Academy. © Fire Safety Academy.