<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Water-reactive_material</id>
	<title>Water-reactive material - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Water-reactive_material"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;action=history"/>
	<updated>2026-11-21T21:58:47Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4857&amp;oldid=prev</id>
		<title>Linda: Remove bibliographic source lines from image captions and descriptions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4857&amp;oldid=prev"/>
		<updated>2026-11-08T07:25:17Z</updated>

		<summary type="html">&lt;p&gt;Remove bibliographic source lines from image captions and descriptions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:25, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l7&quot;&gt;Line 7:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 7:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 704 diamond, as shown by C. J. Wright (2008a) from the 2007 edition of the standard, has four colour-coded quadrants.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; Blue on the left stands for health, red at the top for flammability and yellow on the right for reactivity.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The bottom quadrant carries special information, such as &amp;quot;OX&amp;quot; for oxidisers or a &amp;quot;W&amp;quot; crossed by a horizontal line for water-reactive materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The numbers in the quadrants run from 0 for a low hazard to 4 for a high hazard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 704 diamond, as shown by C. J. Wright (2008a) from the 2007 edition of the standard, has four colour-coded quadrants.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; Blue on the left stands for health, red at the top for flammability and yellow on the right for reactivity.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The bottom quadrant carries special information, such as &amp;quot;OX&amp;quot; for oxidisers or a &amp;quot;W&amp;quot; crossed by a horizontal line for water-reactive materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The numbers in the quadrants run from 0 for a low hazard to 4 for a high hazard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v2.svg|thumb|upright=1.5|alt=NFPA 704 diamond with blue, red, yellow and white quadrants and a crossed W at the bottom, next to a transport label box for Division 4.3.|A crossed W can identify a water-reactivity hazard on an NFPA 704 diamond (left). Division 4.3 is a separate transport classification for materials that meet its criteria (right); the two markings do not define identical groups&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on C. J. Wright (2008a), pp. 13-119–13-123&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v2.svg|thumb|upright=1.5|alt=NFPA 704 diamond with blue, red, yellow and white quadrants and a crossed W at the bottom, next to a transport label box for Division 4.3.|A crossed W can identify a water-reactivity hazard on an NFPA 704 diamond (left). Division 4.3 is a separate transport classification for materials that meet its criteria (right); the two markings do not define identical groups.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Hildebrand and Noll (2008) list water-reactives, pyrophorics and unstable chemicals as examples of a &amp;quot;physical hazard&amp;quot; under the then-described United States workplace regulation (OSHA, 29 CFR 1910).&amp;lt;ref name=&amp;quot;HN-13-82&amp;quot;&amp;gt;Hildebrand and Noll (2008), p. 13-82.&amp;lt;/ref&amp;gt; Under the United States Environmental Protection Agency rules summarised by Severson (2008), a waste is reactive if, among other criteria, it reacts violently with water or forms potentially explosive mixtures with it.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot;&amp;gt;Severson (2008), pp. 7-60–7-61.&amp;lt;/ref&amp;gt; A waste that gives off toxic gases, vapours or fumes in dangerous quantities when mixed with water is also reactive.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Hildebrand and Noll (2008) list water-reactives, pyrophorics and unstable chemicals as examples of a &amp;quot;physical hazard&amp;quot; under the then-described United States workplace regulation (OSHA, 29 CFR 1910).&amp;lt;ref name=&amp;quot;HN-13-82&amp;quot;&amp;gt;Hildebrand and Noll (2008), p. 13-82.&amp;lt;/ref&amp;gt; Under the United States Environmental Protection Agency rules summarised by Severson (2008), a waste is reactive if, among other criteria, it reacts violently with water or forms potentially explosive mixtures with it.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot;&amp;gt;Severson (2008), pp. 7-60–7-61.&amp;lt;/ref&amp;gt; A waste that gives off toxic gases, vapours or fumes in dangerous quantities when mixed with water is also reactive.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l13&quot;&gt;Line 13:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 13:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== How the reaction creates a fire hazard ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== How the reaction creates a fire hazard ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The first hazard is heat. Calcium oxide, better known as quicklime, reacts vigorously with water and can release enough heat to ignite paper, wood or other combustible material under some conditions.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Dry solid caustic soda and caustic potash are noncombustible, but their heat of solution in water can also be sufficient to ignite combustible material.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium, potassium and strontium peroxides react vigorously with water and release oxygen as well as large amounts of heat.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt; The heat from reaction with just a little water might decompose the contents of an entire container, and a fire is likely if organic material is present.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The first hazard is heat. Calcium oxide, better known as quicklime, reacts vigorously with water and can release enough heat to ignite paper, wood or other combustible material under some conditions.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Dry solid caustic soda and caustic potash are noncombustible, but their heat of solution in water can also be sufficient to ignite combustible material.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium, potassium and strontium peroxides react vigorously with water and release oxygen as well as large amounts of heat.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt; The heat from reaction with just a little water might decompose the contents of an entire container, and a fire is likely if organic material is present.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v1.svg|thumb|upright=1.5|alt=Flow scheme: water meets a water-reactive material and produces heat, flammable gas, toxic gas or oxygen, each with example materials.|What contact with water can release from a water-reactive material, with typical examples of each group&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Davenport (2008), pp. 7-46–7-51 and Yu and Newman (2008), p. 2-91&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v1.svg|thumb|upright=1.5|alt=Flow scheme: water meets a water-reactive material and produces heat, flammable gas, toxic gas or oxygen, each with example materials.|What contact with water can release from a water-reactive material, with typical examples of each group.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second hazard is a flammable gas. A number of metals and the metal hydrides release hydrogen, and carbides such as calcium carbide release acetylene.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot;&amp;gt;Yu and Newman (2008), p. 2-91.&amp;lt;/ref&amp;gt; Hydrogen burns in air between 4.0 and 75.0% by volume, has a specific gravity of 0.07 relative to air and an ignition temperature of 500 °C (932 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174.&amp;lt;/ref&amp;gt; Acetylene burns between 2.5 and 81.0% and ignites at 305 °C (581 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen released at low pressure is unlikely to ignite by itself, but it can cause combustion explosions with very rapid pressure rises that are extremely difficult to vent.&amp;lt;ref name=&amp;quot;Lem-6-181&amp;quot;&amp;gt;Lemoff (2008), p. 6-181.&amp;lt;/ref&amp;gt; Heat and gas can also act together: when one-third of its weight of water is added to a water-reactive carbide, the temperature can rise far enough to ignite the gas that is generated.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second hazard is a flammable gas. A number of metals and the metal hydrides release hydrogen, and carbides such as calcium carbide release acetylene.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot;&amp;gt;Yu and Newman (2008), p. 2-91.&amp;lt;/ref&amp;gt; Hydrogen burns in air between 4.0 and 75.0% by volume, has a specific gravity of 0.07 relative to air and an ignition temperature of 500 °C (932 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174.&amp;lt;/ref&amp;gt; Acetylene burns between 2.5 and 81.0% and ignites at 305 °C (581 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen released at low pressure is unlikely to ignite by itself, but it can cause combustion explosions with very rapid pressure rises that are extremely difficult to vent.&amp;lt;ref name=&amp;quot;Lem-6-181&amp;quot;&amp;gt;Lemoff (2008), p. 6-181.&amp;lt;/ref&amp;gt; Heat and gas can also act together: when one-third of its weight of water is added to a water-reactive carbide, the temperature can rise far enough to ignite the gas that is generated.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l34&quot;&gt;Line 34:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 34:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The alkali metals show how these principles are applied. Drums and cases are kept in a dry, fire-resistant room or building used only for alkali metal storage, and because sprinkler protection would be undesirable there, no combustible materials are stored in the same area.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Where exposure fires could endanger equipment containing alkali metals, sprinklers may be considered; Christman (2008) says the then-current NFPA 484 permitted them for lithium storage.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; The room should have no water or steam pipes, enough heat to prevent condensation, and ventilation at a high point to remove any hydrogen released by accidental contact with moisture.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Large quantities are often stored outdoors in aboveground tanks with a nitrogen atmosphere, or argon or helium in the case of lithium, and on workbenches the metal is kept under kerosene or oil.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Because hydrogen may be present, containers should not be opened by hammering on the lid.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The alkali metals show how these principles are applied. Drums and cases are kept in a dry, fire-resistant room or building used only for alkali metal storage, and because sprinkler protection would be undesirable there, no combustible materials are stored in the same area.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Where exposure fires could endanger equipment containing alkali metals, sprinklers may be considered; Christman (2008) says the then-current NFPA 484 permitted them for lithium storage.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; The room should have no water or steam pipes, enough heat to prevent condensation, and ventilation at a high point to remove any hydrogen released by accidental contact with moisture.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Large quantities are often stored outdoors in aboveground tanks with a nitrogen atmosphere, or argon or helium in the case of lithium, and on workbenches the metal is kept under kerosene or oil.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Because hydrogen may be present, containers should not be opened by hammering on the lid.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v4.svg|thumb|upright=1.5|alt=Cut-away of a dry fire-resistant room with drums on metal skids, a heater, a high-level vent for hydrogen and no water pipes or sprinklers.|Main features of a dedicated alkali metal storage room: dry, fire-resistant, without combustibles or water and steam pipes, with drums on metal skids, background heating and a high-level vent for hydrogen&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Christman (2008), p. 6-159&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v4.svg|thumb|upright=1.5|alt=Cut-away of a dry fire-resistant room with drums on metal skids, a heater, a high-level vent for hydrogen and no water pipes or sprinklers.|Main features of a dedicated alkali metal storage room: dry, fire-resistant, without combustibles or water and steam pipes, with drums on metal skids, background heating and a high-level vent for hydrogen.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Slye (2008) calls it poor practice to place tanks of heat-reactive and water-reactive flammable liquids next to each other.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot;&amp;gt;Slye (2008), p. 6-198.&amp;lt;/ref&amp;gt; In a ground fire, water applied to protect the heat-reactive tank might penetrate the other tank and cause a violent reaction.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot; /&amp;gt; In laboratories, Anderson (2008a) judges the reaction of water with water-reactive chemicals, even sodium, during a flammable liquid fire in a fume hood too small to rule out water.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot;&amp;gt;Anderson (2008a), p. 9-160.&amp;lt;/ref&amp;gt; Where water-reactive materials are used in a hood, however, special precautions against an inadvertent discharge are needed.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot; /&amp;gt; At pesticide stores, contaminated runoff and the water reactivity of some materials, such as fumigants, argue against water.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot;&amp;gt;Whitford (2008), p. 6-242.&amp;lt;/ref&amp;gt; Operators may then consider posting the NFPA 704 W signal to warn responders not to use water, after consulting the local authorities and insurers.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Slye (2008) calls it poor practice to place tanks of heat-reactive and water-reactive flammable liquids next to each other.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot;&amp;gt;Slye (2008), p. 6-198.&amp;lt;/ref&amp;gt; In a ground fire, water applied to protect the heat-reactive tank might penetrate the other tank and cause a violent reaction.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot; /&amp;gt; In laboratories, Anderson (2008a) judges the reaction of water with water-reactive chemicals, even sodium, during a flammable liquid fire in a fume hood too small to rule out water.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot;&amp;gt;Anderson (2008a), p. 9-160.&amp;lt;/ref&amp;gt; Where water-reactive materials are used in a hood, however, special precautions against an inadvertent discharge are needed.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot; /&amp;gt; At pesticide stores, contaminated runoff and the water reactivity of some materials, such as fumigants, argue against water.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot;&amp;gt;Whitford (2008), p. 6-242.&amp;lt;/ref&amp;gt; Operators may then consider posting the NFPA 704 W signal to warn responders not to use water, after consulting the local authorities and insurers.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l71&quot;&gt;Line 71:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 71:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Consider 200 kg of a material that, once wet, gives off hydrogen at the Division 4.3 gas-release boundary of 1 L/(kg·h), stored in a closed room of 50 m³. The release rate is 200 L/h, or 0.20 m³/h. With a lower flammable limit of 4.0% for hydrogen, the room needs 0.040 × 50 = 2.0 m³ of hydrogen to become flammable throughout, which takes 2.0 / 0.20 = 10 h.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen is much lighter than air, with a specific gravity of 0.07, and the handbook recommends ventilation at a high spot in alkali metal storage rooms to remove it.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; If the gas stayed in the top 0.5 m of a room 2.5 m high, only one-fifth of the volume would have to reach 4.0%, and the time would fall to about 2.0 h. A material releasing gas ten times faster would make the whole room flammable in about 1.0 h. Exactly 1 L/(kg·h) does not by itself satisfy Wright&amp;#039;s “greater than 1” gas-release criterion for Division 4.3.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Consider 200 kg of a material that, once wet, gives off hydrogen at the Division 4.3 gas-release boundary of 1 L/(kg·h), stored in a closed room of 50 m³. The release rate is 200 L/h, or 0.20 m³/h. With a lower flammable limit of 4.0% for hydrogen, the room needs 0.040 × 50 = 2.0 m³ of hydrogen to become flammable throughout, which takes 2.0 / 0.20 = 10 h.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen is much lighter than air, with a specific gravity of 0.07, and the handbook recommends ventilation at a high spot in alkali metal storage rooms to remove it.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; If the gas stayed in the top 0.5 m of a room 2.5 m high, only one-fifth of the volume would have to reach 4.0%, and the time would fall to about 2.0 h. A material releasing gas ten times faster would make the whole room flammable in about 1.0 h. Exactly 1 L/(kg·h) does not by itself satisfy Wright&amp;#039;s “greater than 1” gas-release criterion for Division 4.3.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v3.svg|thumb|upright=1.5|alt=Line chart of hydrogen concentration against time; three straight lines reach the 4.0 per cent limit after 1, 2 and 10 hours.|Hydrogen concentration in a closed 50 m³ room holding 200 kg of wetted material in the worked example, for even mixing, a ceiling layer, and a ten times faster release&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on C. J. Wright (2008a), p. 13-120 and Lemoff (2008), p. 6-174&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-water-reactive-material-v3.svg|thumb|upright=1.5|alt=Line chart of hydrogen concentration against time; three straight lines reach the 4.0 per cent limit after 1, 2 and 10 hours.|Hydrogen concentration in a closed 50 m³ room holding 200 kg of wetted material in the worked example, for even mixing, a ceiling layer, and a ten times faster release.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The example shows the order of magnitude only. Real releases can be far faster, as with sodium hydride, which ignites with explosive violence on contact with water, and the result scales directly with the mass and the gas release rate.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; For a design or an emergency plan, the material&amp;#039;s own data are needed. Davenport (2008) describes the then-current United States requirement for manufacturers to issue a material safety data sheet (MSDS) giving reactivity and stability.&amp;lt;ref name=&amp;quot;Dav-7-43&amp;quot;&amp;gt;Davenport (2008), pp. 7-43–7-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The example shows the order of magnitude only. Real releases can be far faster, as with sodium hydride, which ignites with explosive violence on contact with water, and the result scales directly with the mass and the gas release rate.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; For a design or an emergency plan, the material&amp;#039;s own data are needed. Davenport (2008) describes the then-current United States requirement for manufacturers to issue a material safety data sheet (MSDS) giving reactivity and stability.&amp;lt;ref name=&amp;quot;Dav-7-43&amp;quot;&amp;gt;Davenport (2008), pp. 7-43–7-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4543:rev-4857:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4543&amp;oldid=prev</id>
		<title>Lisa: Add 4 watermarked NFPA SVG illustrations</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4543&amp;oldid=prev"/>
		<updated>2026-11-08T06:59:24Z</updated>

		<summary type="html">&lt;p&gt;Add 4 watermarked NFPA SVG illustrations&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 07:59, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l7&quot;&gt;Line 7:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 7:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 704 diamond, as shown by C. J. Wright (2008a) from the 2007 edition of the standard, has four colour-coded quadrants.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; Blue on the left stands for health, red at the top for flammability and yellow on the right for reactivity.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The bottom quadrant carries special information, such as &amp;quot;OX&amp;quot; for oxidisers or a &amp;quot;W&amp;quot; crossed by a horizontal line for water-reactive materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The numbers in the quadrants run from 0 for a low hazard to 4 for a high hazard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 704 diamond, as shown by C. J. Wright (2008a) from the 2007 edition of the standard, has four colour-coded quadrants.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; Blue on the left stands for health, red at the top for flammability and yellow on the right for reactivity.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The bottom quadrant carries special information, such as &amp;quot;OX&amp;quot; for oxidisers or a &amp;quot;W&amp;quot; crossed by a horizontal line for water-reactive materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The numbers in the quadrants run from 0 for a low hazard to 4 for a high hazard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-water-reactive-material-v2.svg|thumb|upright=1.5|alt=NFPA 704 diamond with blue, red, yellow and white quadrants and a crossed W at the bottom, next to a transport label box for Division 4.3.|A crossed W can identify a water-reactivity hazard on an NFPA 704 diamond (left). Division 4.3 is a separate transport classification for materials that meet its criteria (right); the two markings do not define identical groups. Based on C. J. Wright (2008a), pp. 13-119–13-123.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Hildebrand and Noll (2008) list water-reactives, pyrophorics and unstable chemicals as examples of a &amp;quot;physical hazard&amp;quot; under the then-described United States workplace regulation (OSHA, 29 CFR 1910).&amp;lt;ref name=&amp;quot;HN-13-82&amp;quot;&amp;gt;Hildebrand and Noll (2008), p. 13-82.&amp;lt;/ref&amp;gt; Under the United States Environmental Protection Agency rules summarised by Severson (2008), a waste is reactive if, among other criteria, it reacts violently with water or forms potentially explosive mixtures with it.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot;&amp;gt;Severson (2008), pp. 7-60–7-61.&amp;lt;/ref&amp;gt; A waste that gives off toxic gases, vapours or fumes in dangerous quantities when mixed with water is also reactive.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Hildebrand and Noll (2008) list water-reactives, pyrophorics and unstable chemicals as examples of a &amp;quot;physical hazard&amp;quot; under the then-described United States workplace regulation (OSHA, 29 CFR 1910).&amp;lt;ref name=&amp;quot;HN-13-82&amp;quot;&amp;gt;Hildebrand and Noll (2008), p. 13-82.&amp;lt;/ref&amp;gt; Under the United States Environmental Protection Agency rules summarised by Severson (2008), a waste is reactive if, among other criteria, it reacts violently with water or forms potentially explosive mixtures with it.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot;&amp;gt;Severson (2008), pp. 7-60–7-61.&amp;lt;/ref&amp;gt; A waste that gives off toxic gases, vapours or fumes in dangerous quantities when mixed with water is also reactive.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l12&quot;&gt;Line 12:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 13:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== How the reaction creates a fire hazard ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== How the reaction creates a fire hazard ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The first hazard is heat. Calcium oxide, better known as quicklime, reacts vigorously with water and can release enough heat to ignite paper, wood or other combustible material under some conditions.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Dry solid caustic soda and caustic potash are noncombustible, but their heat of solution in water can also be sufficient to ignite combustible material.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium, potassium and strontium peroxides react vigorously with water and release oxygen as well as large amounts of heat.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt; The heat from reaction with just a little water might decompose the contents of an entire container, and a fire is likely if organic material is present.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The first hazard is heat. Calcium oxide, better known as quicklime, reacts vigorously with water and can release enough heat to ignite paper, wood or other combustible material under some conditions.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Dry solid caustic soda and caustic potash are noncombustible, but their heat of solution in water can also be sufficient to ignite combustible material.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium, potassium and strontium peroxides react vigorously with water and release oxygen as well as large amounts of heat.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt; The heat from reaction with just a little water might decompose the contents of an entire container, and a fire is likely if organic material is present.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-water-reactive-material-v1.svg|thumb|upright=1.5|alt=Flow scheme: water meets a water-reactive material and produces heat, flammable gas, toxic gas or oxygen, each with example materials.|What contact with water can release from a water-reactive material, with typical examples of each group. Based on Davenport (2008), pp. 7-46–7-51 and Yu and Newman (2008), p. 2-91.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second hazard is a flammable gas. A number of metals and the metal hydrides release hydrogen, and carbides such as calcium carbide release acetylene.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot;&amp;gt;Yu and Newman (2008), p. 2-91.&amp;lt;/ref&amp;gt; Hydrogen burns in air between 4.0 and 75.0% by volume, has a specific gravity of 0.07 relative to air and an ignition temperature of 500 °C (932 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174.&amp;lt;/ref&amp;gt; Acetylene burns between 2.5 and 81.0% and ignites at 305 °C (581 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen released at low pressure is unlikely to ignite by itself, but it can cause combustion explosions with very rapid pressure rises that are extremely difficult to vent.&amp;lt;ref name=&amp;quot;Lem-6-181&amp;quot;&amp;gt;Lemoff (2008), p. 6-181.&amp;lt;/ref&amp;gt; Heat and gas can also act together: when one-third of its weight of water is added to a water-reactive carbide, the temperature can rise far enough to ignite the gas that is generated.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second hazard is a flammable gas. A number of metals and the metal hydrides release hydrogen, and carbides such as calcium carbide release acetylene.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot;&amp;gt;Yu and Newman (2008), p. 2-91.&amp;lt;/ref&amp;gt; Hydrogen burns in air between 4.0 and 75.0% by volume, has a specific gravity of 0.07 relative to air and an ignition temperature of 500 °C (932 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174.&amp;lt;/ref&amp;gt; Acetylene burns between 2.5 and 81.0% and ignites at 305 °C (581 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen released at low pressure is unlikely to ignite by itself, but it can cause combustion explosions with very rapid pressure rises that are extremely difficult to vent.&amp;lt;ref name=&amp;quot;Lem-6-181&amp;quot;&amp;gt;Lemoff (2008), p. 6-181.&amp;lt;/ref&amp;gt; Heat and gas can also act together: when one-third of its weight of water is added to a water-reactive carbide, the temperature can rise far enough to ignite the gas that is generated.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l32&quot;&gt;Line 32:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 34:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The alkali metals show how these principles are applied. Drums and cases are kept in a dry, fire-resistant room or building used only for alkali metal storage, and because sprinkler protection would be undesirable there, no combustible materials are stored in the same area.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Where exposure fires could endanger equipment containing alkali metals, sprinklers may be considered; Christman (2008) says the then-current NFPA 484 permitted them for lithium storage.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; The room should have no water or steam pipes, enough heat to prevent condensation, and ventilation at a high point to remove any hydrogen released by accidental contact with moisture.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Large quantities are often stored outdoors in aboveground tanks with a nitrogen atmosphere, or argon or helium in the case of lithium, and on workbenches the metal is kept under kerosene or oil.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Because hydrogen may be present, containers should not be opened by hammering on the lid.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The alkali metals show how these principles are applied. Drums and cases are kept in a dry, fire-resistant room or building used only for alkali metal storage, and because sprinkler protection would be undesirable there, no combustible materials are stored in the same area.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Where exposure fires could endanger equipment containing alkali metals, sprinklers may be considered; Christman (2008) says the then-current NFPA 484 permitted them for lithium storage.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; The room should have no water or steam pipes, enough heat to prevent condensation, and ventilation at a high point to remove any hydrogen released by accidental contact with moisture.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Large quantities are often stored outdoors in aboveground tanks with a nitrogen atmosphere, or argon or helium in the case of lithium, and on workbenches the metal is kept under kerosene or oil.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Because hydrogen may be present, containers should not be opened by hammering on the lid.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-water-reactive-material-v4.svg|thumb|upright=1.5|alt=Cut-away of a dry fire-resistant room with drums on metal skids, a heater, a high-level vent for hydrogen and no water pipes or sprinklers.|Main features of a dedicated alkali metal storage room: dry, fire-resistant, without combustibles or water and steam pipes, with drums on metal skids, background heating and a high-level vent for hydrogen. Based on Christman (2008), p. 6-159.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Slye (2008) calls it poor practice to place tanks of heat-reactive and water-reactive flammable liquids next to each other.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot;&amp;gt;Slye (2008), p. 6-198.&amp;lt;/ref&amp;gt; In a ground fire, water applied to protect the heat-reactive tank might penetrate the other tank and cause a violent reaction.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot; /&amp;gt; In laboratories, Anderson (2008a) judges the reaction of water with water-reactive chemicals, even sodium, during a flammable liquid fire in a fume hood too small to rule out water.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot;&amp;gt;Anderson (2008a), p. 9-160.&amp;lt;/ref&amp;gt; Where water-reactive materials are used in a hood, however, special precautions against an inadvertent discharge are needed.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot; /&amp;gt; At pesticide stores, contaminated runoff and the water reactivity of some materials, such as fumigants, argue against water.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot;&amp;gt;Whitford (2008), p. 6-242.&amp;lt;/ref&amp;gt; Operators may then consider posting the NFPA 704 W signal to warn responders not to use water, after consulting the local authorities and insurers.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Slye (2008) calls it poor practice to place tanks of heat-reactive and water-reactive flammable liquids next to each other.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot;&amp;gt;Slye (2008), p. 6-198.&amp;lt;/ref&amp;gt; In a ground fire, water applied to protect the heat-reactive tank might penetrate the other tank and cause a violent reaction.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot; /&amp;gt; In laboratories, Anderson (2008a) judges the reaction of water with water-reactive chemicals, even sodium, during a flammable liquid fire in a fume hood too small to rule out water.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot;&amp;gt;Anderson (2008a), p. 9-160.&amp;lt;/ref&amp;gt; Where water-reactive materials are used in a hood, however, special precautions against an inadvertent discharge are needed.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot; /&amp;gt; At pesticide stores, contaminated runoff and the water reactivity of some materials, such as fumigants, argue against water.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot;&amp;gt;Whitford (2008), p. 6-242.&amp;lt;/ref&amp;gt; Operators may then consider posting the NFPA 704 W signal to warn responders not to use water, after consulting the local authorities and insurers.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l68&quot;&gt;Line 68:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 71:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Consider 200 kg of a material that, once wet, gives off hydrogen at the Division 4.3 gas-release boundary of 1 L/(kg·h), stored in a closed room of 50 m³. The release rate is 200 L/h, or 0.20 m³/h. With a lower flammable limit of 4.0% for hydrogen, the room needs 0.040 × 50 = 2.0 m³ of hydrogen to become flammable throughout, which takes 2.0 / 0.20 = 10 h.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen is much lighter than air, with a specific gravity of 0.07, and the handbook recommends ventilation at a high spot in alkali metal storage rooms to remove it.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; If the gas stayed in the top 0.5 m of a room 2.5 m high, only one-fifth of the volume would have to reach 4.0%, and the time would fall to about 2.0 h. A material releasing gas ten times faster would make the whole room flammable in about 1.0 h. Exactly 1 L/(kg·h) does not by itself satisfy Wright&amp;#039;s “greater than 1” gas-release criterion for Division 4.3.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Consider 200 kg of a material that, once wet, gives off hydrogen at the Division 4.3 gas-release boundary of 1 L/(kg·h), stored in a closed room of 50 m³. The release rate is 200 L/h, or 0.20 m³/h. With a lower flammable limit of 4.0% for hydrogen, the room needs 0.040 × 50 = 2.0 m³ of hydrogen to become flammable throughout, which takes 2.0 / 0.20 = 10 h.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen is much lighter than air, with a specific gravity of 0.07, and the handbook recommends ventilation at a high spot in alkali metal storage rooms to remove it.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; If the gas stayed in the top 0.5 m of a room 2.5 m high, only one-fifth of the volume would have to reach 4.0%, and the time would fall to about 2.0 h. A material releasing gas ten times faster would make the whole room flammable in about 1.0 h. Exactly 1 L/(kg·h) does not by itself satisfy Wright&amp;#039;s “greater than 1” gas-release criterion for Division 4.3.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-water-reactive-material-v3.svg|thumb|upright=1.5|alt=Line chart of hydrogen concentration against time; three straight lines reach the 4.0 per cent limit after 1, 2 and 10 hours.|Hydrogen concentration in a closed 50 m³ room holding 200 kg of wetted material in the worked example, for even mixing, a ceiling layer, and a ten times faster release. Based on C. J. Wright (2008a), p. 13-120 and Lemoff (2008), p. 6-174.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The example shows the order of magnitude only. Real releases can be far faster, as with sodium hydride, which ignites with explosive violence on contact with water, and the result scales directly with the mass and the gas release rate.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; For a design or an emergency plan, the material&amp;#039;s own data are needed. Davenport (2008) describes the then-current United States requirement for manufacturers to issue a material safety data sheet (MSDS) giving reactivity and stability.&amp;lt;ref name=&amp;quot;Dav-7-43&amp;quot;&amp;gt;Davenport (2008), pp. 7-43–7-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The example shows the order of magnitude only. Real releases can be far faster, as with sodium hydride, which ignites with explosive violence on contact with water, and the result scales directly with the mass and the gas release rate.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; For a design or an emergency plan, the material&amp;#039;s own data are needed. Davenport (2008) describes the then-current United States requirement for manufacturers to issue a material safety data sheet (MSDS) giving reactivity and stability.&amp;lt;ref name=&amp;quot;Dav-7-43&amp;quot;&amp;gt;Davenport (2008), pp. 7-43–7-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4247:rev-4543:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Lisa</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4247&amp;oldid=prev</id>
		<title>Peter: FSE wiki: Fact-check: classify Division 4.3 by its actual criterion; correct handbook water-energy units and qualify response statements (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=4247&amp;oldid=prev"/>
		<updated>2026-11-08T00:54:36Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Fact-check: classify Division 4.3 by its actual criterion; correct handbook water-energy units and qualify response statements (written by Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;amp;diff=4247&amp;amp;oldid=3022&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=3022&amp;oldid=prev</id>
		<title>Peter: New FSE wiki article: Water-reactive material (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Water-reactive_material&amp;diff=3022&amp;oldid=prev"/>
		<updated>2026-11-07T21:06:02Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Water-reactive material (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;water-reactive material&amp;#039;&amp;#039;&amp;#039; is a chemical that reacts with water, often violently, and in doing so releases heat, a flammable or toxic gas, or both.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot;&amp;gt;Davenport (2008), p. 7-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Fr-17-41&amp;quot;&amp;gt;Frank (2008), p. 17-41.&amp;lt;/ref&amp;gt; If the material is combustible, the heat of the reaction can ignite the material itself; if it is noncombustible, the heat can still ignite combustible materials nearby.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Typical examples are the alkali metals sodium, potassium and lithium, carbides that give off acetylene, metal hydrides that give off hydrogen, acid anhydrides, quicklime and some inorganic peroxides.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot;&amp;gt;Davenport (2008), p. 7-51.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot;&amp;gt;Davenport (2008), p. 7-46.&amp;lt;/ref&amp;gt; The hazard matters most in fire fighting, because water is normally used on fires involving chemicals, except on chemicals that are dangerously water-reactive.&amp;lt;ref name=&amp;quot;Dav-7-44&amp;quot;&amp;gt;Davenport (2008), p. 7-44.&amp;lt;/ref&amp;gt; In the United States, as described in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, they carry a &amp;quot;W&amp;quot; on the [[NFPA 704]] diamond and travel as Division 4.3 &amp;quot;dangerous when wet&amp;quot; materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-123.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Wr-13-119&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-119.&amp;lt;/ref&amp;gt; They are stored dry, in waterproof and airtight containers, and fires in them are fought with special dry powders, dry sand or inert gases rather than water.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot;&amp;gt;Christman (2008), p. 6-160.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Definition and classification ==&lt;br /&gt;
In the handbook chapter on the storage and handling of chemicals, Davenport (2008) treats water-reactive and air-reactive chemicals as one group, because both liberate significant quantities of heat when they react.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; He names anhydrides, carbides, hydrides and the alkali metals lithium, sodium and potassium as the typical water-reactive chemicals.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; In the SFPE Handbook, Fleming (2002) calls water the most commonly used extinguishing agent, but considers it inappropriate for certain water reactive materials, because its use can produce heat, flammable or toxic gases, or explosions.&amp;lt;ref name=&amp;quot;Fle-4-72&amp;quot;&amp;gt;Fleming (2002), p. 4-72.&amp;lt;/ref&amp;gt; Frank (2008) states the same general rule for materials that react with water and may release oxygen, flammable gases and heat, and lists alkalies, anhydrides, carbides, hydrides, nitrates and peroxides as examples.&amp;lt;ref name=&amp;quot;Fr-17-41&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Transport rules give the term a numerical boundary. In the international hazard classes reproduced by C. J. Wright (2008a), water-reactive solids and liquids belong to Class 4, &amp;quot;flammable solids and reactive liquids and solids&amp;quot;, as Division 4.3, with calcium carbide and potassium as examples.&amp;lt;ref name=&amp;quot;Wr-13-119&amp;quot; /&amp;gt; There, a dangerous-when-wet material is one that, by contact with water, is liable to become spontaneously flammable or to give off flammable or toxic gas at more than 1 L per kilogram per hour.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-120.&amp;lt;/ref&amp;gt; Shipping papers can carry a &amp;quot;DANGEROUS WHEN WET&amp;quot; notation.&amp;lt;ref name=&amp;quot;Wr-13-126&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-126.&amp;lt;/ref&amp;gt; NUREG-1805 lists the same Division 4.3 in its table of United States Department of Transportation hazard classes.&amp;lt;ref name=&amp;quot;IS-B-22&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-22.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The NFPA 704 diamond, as shown by C. J. Wright (2008a) from the 2007 edition of the standard, has four colour-coded quadrants.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; Blue on the left stands for health, red at the top for flammability and yellow on the right for reactivity.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The bottom quadrant carries special information, such as &amp;quot;OX&amp;quot; for oxidisers or a &amp;quot;W&amp;quot; crossed by a horizontal line for water-reactive materials.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The numbers in the quadrants run from 0 for a low hazard to 4 for a high hazard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
United States workplace regulation (OSHA, 29 CFR 1910) names water-reactives among its examples of a &amp;quot;physical hazard&amp;quot;, together with pyrophorics and unstable (reactive) chemicals.&amp;lt;ref name=&amp;quot;HN-13-82&amp;quot;&amp;gt;Hildebrand and Noll (2008), p. 13-82.&amp;lt;/ref&amp;gt; Under the United States Environmental Protection Agency rules summarised by Severson (2008), a waste is reactive if, among other criteria, it reacts violently with water or forms potentially explosive mixtures with it.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot;&amp;gt;Severson (2008), pp. 7-60–7-61.&amp;lt;/ref&amp;gt; A waste that gives off toxic gases, vapours or fumes in dangerous quantities when mixed with water is also reactive.&amp;lt;ref name=&amp;quot;Sev-7-60&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== How the reaction creates a fire hazard ==&lt;br /&gt;
The first hazard is heat. Calcium oxide, better known as quicklime, reacts vigorously with water and can release enough heat to ignite paper, wood or other combustible material under some conditions.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Dry solid caustic soda and caustic potash are noncombustible, but their heat of solution in water can also be sufficient to ignite combustible material.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium, potassium and strontium peroxides react vigorously with water and release oxygen as well as large amounts of heat.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt; The heat from reaction with just a little water might decompose the contents of an entire container, and a fire is likely if organic material is present.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The second hazard is a flammable gas. A number of metals and the metal hydrides release hydrogen, and carbides such as calcium carbide release acetylene.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot;&amp;gt;Yu and Newman (2008), p. 2-91.&amp;lt;/ref&amp;gt; Hydrogen burns in air between 4.0 and 75.0% by volume, has a specific gravity of 0.07 relative to air and an ignition temperature of 500 °C (932 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174.&amp;lt;/ref&amp;gt; Acetylene burns between 2.5 and 81.0% and ignites at 305 °C (581 °F).&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen released at low pressure is unlikely to ignite by itself, but it can cause combustion explosions with very rapid pressure rises that are extremely difficult to vent.&amp;lt;ref name=&amp;quot;Lem-6-181&amp;quot;&amp;gt;Lemoff (2008), p. 6-181.&amp;lt;/ref&amp;gt; Heat and gas can also act together: when one-third of its weight of water is added to a water-reactive carbide, the temperature can rise far enough to ignite the gas that is generated.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Other products are toxic. Cyanide salts react with acidified water to form highly toxic hydrogen cyanide, and phosphorus pentasulfide reacts with water to give hydrogen sulfide, a very toxic gas.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-48&amp;quot;&amp;gt;Davenport (2008), p. 7-48.&amp;lt;/ref&amp;gt; A further danger is physical: violent steam explosions can result when water enters molten metal.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Zalosh (2008) lists the hydration of water-reactive materials among the chemical reactions that can cause explosions.&amp;lt;ref name=&amp;quot;Zal-2-102&amp;quot;&amp;gt;Zalosh (2008), p. 2-102.&amp;lt;/ref&amp;gt; Such reactions can produce gas that overpressurises a vessel without adequate relief vent area, or run away and rapidly raise the pressure of the gases already present.&amp;lt;ref name=&amp;quot;Zal-2-102&amp;quot; /&amp;gt; One example in his table occurred at South Baltimore, Maryland, on 13 October 1998.&amp;lt;ref name=&amp;quot;Zal-2-102&amp;quot; /&amp;gt; There, an excessive rate of steam addition to powdered aluminium, aluminium chloride and water caused an uncontrolled reaction and five injuries.&amp;lt;ref name=&amp;quot;Zal-2-102&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Main groups of water-reactive materials ==&lt;br /&gt;
The alkali metals (caesium, francium, lithium, potassium, rubidium, sodium and alloys such as NaK) are water reactive and generate hydrogen on contact with water.&amp;lt;ref name=&amp;quot;Chr-6-153&amp;quot;&amp;gt;Christman (2008), p. 6-153.&amp;lt;/ref&amp;gt; Lithium, sodium, potassium and NaK react with water at room temperature, and the amount of metal or its particle size does not contribute to the risk of ignition.&amp;lt;ref name=&amp;quot;Chr-6-153&amp;quot; /&amp;gt; Sodium floats on water, with a density of 0.97, and reacts vigorously and melts; the heat of the reaction may ignite the hydrogen released.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot;&amp;gt;Christman (2008), p. 6-159.&amp;lt;/ref&amp;gt; Potassium is usually more reactive than sodium, and the sodium-potassium alloys known as NaK react more vigorously than either metal, with leaks under pressure having ignited spontaneously.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Lithium also forms hydrogen, but its reaction does not generate enough heat to ignite the gas, so hydrogen can build up into an explosive cloud unless the area is well ventilated.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Other metals react with water under some conditions. Magnesium, a [[combustible metal]], combines so readily with oxygen that water applied to a magnesium fire can be decomposed, after which the released hydrogen burns and adds to the intensity of the fire.&amp;lt;ref name=&amp;quot;Chr-6-157&amp;quot;&amp;gt;Christman (2008), p. 6-157.&amp;lt;/ref&amp;gt; The combustion of zirconium dust in air is stimulated by 5 to 10% of water, and some water-moistened metal powders such as zirconium burn with near-explosive violence.&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-154&amp;quot;&amp;gt;Christman (2008), p. 6-154.&amp;lt;/ref&amp;gt; Yet zirconium powder, being highly combustible, is customarily stored and shipped in 3.8 L (1 gal) containers with at least 25% water by volume, and completely immersed powder is difficult to ignite.&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt; Damp hafnium powder releases hydrogen, but at ordinary temperatures not vigorously enough to ignite it.&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt; In titanium melting furnaces, a penetrated water-cooled crucible lets water react explosively with the molten metal.&amp;lt;ref name=&amp;quot;Chr-6-158&amp;quot;&amp;gt;Christman (2008), p. 6-158.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Carbides and hydrides form the next groups. The carbides of sodium and potassium can react explosively with water, while calcium, lithium, potassium and barium carbides decompose in water to form acetylene; the carbides of silicon and tungsten, by contrast, are very stable.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; The same reaction is used on purpose in acetylene generators, which react calcium carbide with water at the consuming site.&amp;lt;ref name=&amp;quot;Lem-6-177&amp;quot;&amp;gt;Lemoff (2008), p. 6-177.&amp;lt;/ref&amp;gt; Metal hydrides react with water to form hydrogen.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Sodium hydride ignites with explosive violence on contact with water and may ignite by absorbing moisture from the air, and lithium hydride dust is likely to explode in humid air.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Acid anhydrides are acids from which water has been removed, and they react with water, usually violently, to regenerate the acid.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; The organic anhydrides are combustible and have lower flash points than their acids, for example 54 °C (129 °F) for acetic anhydride.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Sodium oxide reacts violently with water, and the heat of quicklime has already been described.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Some materials react with both water and air: triethylaluminium, the most common aluminium alkyl, ignites spontaneously in air and on contact with water, and sodium hydrosulfite heats spontaneously on contact with moisture and air.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Fluorine reacts explosively even with water vapour.&amp;lt;ref name=&amp;quot;Dav-7-53&amp;quot;&amp;gt;Davenport (2008), p. 7-53.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Storage and handling ==&lt;br /&gt;
Water-reactive chemicals should be stored in dry areas, in waterproof and airtight containers kept off the floor on skids, in a storage area without combustible material or incompatible chemicals.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Materials that react with both water and air, such as the aluminium alkyls, are stored under inert liquids or inert gas.&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt; Segregation from other materials, from processing operations and from incompatible materials is the first principle of chemical storage, and the possible rupture of vessels and mixing of incompatible materials under fire conditions must be considered.&amp;lt;ref name=&amp;quot;Dav-7-44&amp;quot; /&amp;gt; NFPA 491, a guide to [[chemical incompatibility]], describes more than 3400 dangerous reactions, and safe transport excludes chemicals that can react dangerously with each other from the same outside container.&amp;lt;ref name=&amp;quot;Dav-7-54&amp;quot;&amp;gt;Davenport (2008), p. 7-54.&amp;lt;/ref&amp;gt; The shipping label classifies a chemical for transport purposes only, so storage should be arranged from a thorough knowledge of its fire, health and reactivity hazards.&amp;lt;ref name=&amp;quot;Dav-7-45&amp;quot;&amp;gt;Davenport (2008), p. 7-45.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The alkali metals show how these principles are applied. Drums and cases are kept in a dry, fire-resistant room or building used only for alkali metal storage, and because sprinkler protection would be undesirable there, no combustible materials are stored in the same area.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Where exposure fires could endanger equipment containing alkali metals, sprinklers may be considered, and NFPA 484 permits them for lithium storage.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; The room should have no water or steam pipes, enough heat to prevent condensation, and ventilation at a high point to remove any hydrogen released by accidental contact with moisture.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Large quantities are often stored outdoors in aboveground tanks with a nitrogen atmosphere, or argon or helium in the case of lithium, and on workbenches the metal is kept under kerosene or oil.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; Because hydrogen may be present, containers should not be opened by hammering on the lid.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Slye (2008) calls it poor practice to place tanks of heat-reactive and water-reactive flammable liquids next to each other.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot;&amp;gt;Slye (2008), p. 6-198.&amp;lt;/ref&amp;gt; In a ground fire, water applied to protect the heat-reactive tank might penetrate the other tank and cause a violent reaction.&amp;lt;ref name=&amp;quot;Sly-6-198&amp;quot; /&amp;gt; In laboratories, Anderson (2008a) judges the reaction of water with water-reactive chemicals, even sodium, during a flammable liquid fire in a fume hood too small to rule out water.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot;&amp;gt;Anderson (2008a), p. 9-160.&amp;lt;/ref&amp;gt; Where water-reactive materials are used in a hood, however, special precautions against an inadvertent discharge are needed.&amp;lt;ref name=&amp;quot;And-9-160&amp;quot; /&amp;gt; At pesticide stores, contaminated runoff and the water reactivity of some materials, such as fumigants, argue against water.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot;&amp;gt;Whitford (2008), p. 6-242.&amp;lt;/ref&amp;gt; Operators may then consider posting the NFPA 704 W signal to warn responders not to use water, after consulting the local authorities and insurers.&amp;lt;ref name=&amp;quot;Whi-6-242&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire fighting and extinguishing agents ==&lt;br /&gt;
Water is the most commonly used [[extinguishing agent]], mainly because it is widely available and inexpensive.&amp;lt;ref name=&amp;quot;Fle-4-72&amp;quot; /&amp;gt; It also absorbs much heat: one US gallon takes up 2586.5 kJ when heated from 21 °C to steam at 100 °C, about 683 kJ per litre.&amp;lt;ref name=&amp;quot;Fle-4-72&amp;quot; /&amp;gt; For water-reactive materials the quantity of water decides the outcome, since application of sufficient water can overcome the reaction of minor amounts of these materials.&amp;lt;ref name=&amp;quot;Fle-4-72&amp;quot; /&amp;gt; Frank (2008) describes a range from minor to explosive reactions between water and combustible metals and advises, as a rule, against water on fires of magnesium, titanium, metallic sodium and hafnium.&amp;lt;ref name=&amp;quot;Fr-17-41&amp;quot; /&amp;gt; Water can still be used to cool and protect exposures.&amp;lt;ref name=&amp;quot;Fr-17-41&amp;quot; /&amp;gt; Large quantities of water have extinguished small quantities of burning magnesium where no pools of molten metal were present.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Metal fires form their own class in the [[fire classes|classification of fires]] used for portable extinguishers.&amp;lt;ref name=&amp;quot;Con-17-71&amp;quot;&amp;gt;Conroy (2008), pp. 17-71–17-72.&amp;lt;/ref&amp;gt; Class D fires involve combustible metals such as magnesium, titanium, zirconium, sodium, lithium and potassium, and require special agents known as dry powder.&amp;lt;ref name=&amp;quot;Con-17-71&amp;quot; /&amp;gt; Because the metals differ, even a Class D agent may be hazardous on the wrong metal.&amp;lt;ref name=&amp;quot;Con-17-87&amp;quot;&amp;gt;Conroy (2008), p. 17-87.&amp;lt;/ref&amp;gt; In the United States practice described by Conroy (2008), the maximum travel distance to a Class D extinguisher is 22.9 m (75 ft).&amp;lt;ref name=&amp;quot;Con-17-87&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Water, foam and vaporising liquids should never be used on alkali metal fires.&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt; Graphite-based powders, dry sand, dry sodium chloride, dry lithium chloride and dry soda ash blanket the fire while the metal cools below its ignition temperature.&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt; Nitrogen blanketing works for sodium, potassium and NaK, but not for lithium, which can burn in nitrogen and needs argon or helium instead.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-160&amp;quot; /&amp;gt; More generally, certain metals react exothermically with nitrogen, which leaves helium and argon as the only acceptable inert gases for them.&amp;lt;ref name=&amp;quot;YN-2-91&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Chemical fires need agent choices of their own. Fires involving hydrides can be smothered with a graphite-based powder or with dry, finely divided dolomite.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-52&amp;quot;&amp;gt;Davenport (2008), p. 7-52.&amp;lt;/ref&amp;gt; A hydride fire in an enclosed space should not be put out, because hydrogen keeps evolving after extinguishment and creates an explosion hazard.&amp;lt;ref name=&amp;quot;Dav-7-52&amp;quot; /&amp;gt; Fires of aluminium alkyls, which react with both air and water, can be contained by dry chemical while the material burns out under control.&amp;lt;ref name=&amp;quot;Dav-7-52&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Foam and wetting agents do not remove the problem. One condition for a foam to be fully effective is that the burning liquid is not water reactive.&amp;lt;ref name=&amp;quot;Sch-17-46&amp;quot;&amp;gt;Scheffey (2008), p. 17-46.&amp;lt;/ref&amp;gt; Medium- and high-expansion foams should not be used on water-reactive metals or on materials such as triethylaluminium and phosphorus pentoxide unless tests show them to be acceptable.&amp;lt;ref name=&amp;quot;SH-4-129&amp;quot;&amp;gt;Scheffey and Hickey (2002), p. 4-129.&amp;lt;/ref&amp;gt; Wet water, which is water with a wetting agent, has the same limitations as plain water on chemicals that react with water.&amp;lt;ref name=&amp;quot;Fr-17-36&amp;quot;&amp;gt;Frank (2008), p. 17-36.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
These limits shape [[hazardous materials response]]. Manual fire fighting at stores of reactive chemicals may be severely limited by toxicity, smoke or the risk of explosion, and where explosion is possible it should be conducted from a remote location.&amp;lt;ref name=&amp;quot;Dav-7-44&amp;quot; /&amp;gt; Christman (2008) stresses prefire planning, so that fire departments know before arrival which combustible metals are present at the businesses they protect.&amp;lt;ref name=&amp;quot;Chr-6-155&amp;quot;&amp;gt;Christman (2008), p. 6-155.&amp;lt;/ref&amp;gt; In terms of the fire triangle of fuel, oxygen and temperature, water applied to a burning combustible metal is broken down into hydrogen and oxygen that feed the fire, while the reaction itself adds heat.&amp;lt;ref name=&amp;quot;VR-4.2&amp;quot;&amp;gt;Van Rossum (2027), §4.2.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-155&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Worked example: gas release at the Division 4.3 threshold ==&lt;br /&gt;
The Division 4.3 boundary of 1 L of gas per kilogram per hour allows a rough estimate of how fast a flammable atmosphere could form if wetted material stands in a closed room.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt; The estimate assumes that the gas is hydrogen, that it mixes evenly through the room volume, and that there is no ventilation or leakage. The time to reach the lower flammable limit is then the gas volume needed for that limit divided by the release rate:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;t = \frac{x_\mathrm{LFL}\,V}{r\,m}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;t&amp;lt;/math&amp;gt; || Time until the room reaches the lower flammable limit || h&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;x_\mathrm{LFL}&amp;lt;/math&amp;gt; || Lower flammable limit of the gas, as a volume fraction || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;V&amp;lt;/math&amp;gt; || Free volume of the room || m³&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;r&amp;lt;/math&amp;gt; || Gas release rate per kilogram of material || m³/(kg·h)&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;m&amp;lt;/math&amp;gt; || Mass of wetted material || kg&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Consider 200 kg of a material that, once wet, gives off hydrogen at exactly the threshold rate of 1 L/(kg·h), stored in a closed room of 50 m³. The release rate is 200 L/h, or 0.20 m³/h. With a lower flammable limit of 4.0% for hydrogen, the room needs 0.040 × 50 = 2.0 m³ of hydrogen to become flammable throughout, which takes 2.0 / 0.20 = 10 h.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt; Hydrogen is much lighter than air, with a specific gravity of 0.07, and the handbook recommends ventilation at a high spot in alkali metal storage rooms to remove it.&amp;lt;ref name=&amp;quot;Lem-6-174&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; If the gas stayed in the top 0.5 m of a room 2.5 m high, only one-fifth of the volume would have to reach 4.0%, and the time would fall to about 2.0 h. A material releasing gas ten times faster would make the whole room flammable in about 1.0 h.&lt;br /&gt;
&lt;br /&gt;
The example shows the order of magnitude only. Real releases can be far faster, as with sodium hydride, which ignites with explosive violence on contact with water, and the result scales directly with the mass and the gas release rate.&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; For a design or an emergency plan, the material&amp;#039;s own data are needed. Under United States law, manufacturers must issue a material safety data sheet (MSDS) that gives its reactivity and stability.&amp;lt;ref name=&amp;quot;Dav-7-43&amp;quot;&amp;gt;Davenport (2008), pp. 7-43–7-44.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limits and common misconceptions ==&lt;br /&gt;
A frequent misconception is that all water-reactive materials react alike. The alkali metals themselves differ widely: the heat of the sodium-water reaction can ignite the hydrogen it releases, whereas the lithium-water reaction does not, which allows unburned hydrogen to accumulate instead.&amp;lt;ref name=&amp;quot;Chr-6-159&amp;quot; /&amp;gt; A second misconception is that a small amount of water is always safer than a large one. With sodium and potassium peroxides, a little water can decompose a whole container, and burning lithium aluminium hydride solutions in ether burn more intensely when small amounts of water are added.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt; Conversely, large quantities of water can overcome the reaction of minor amounts of material.&amp;lt;ref name=&amp;quot;Fle-4-72&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Water-reactivity also does not rule out sprinklers in every case. For magnesium, automatic sprinklers are considered desirable because they give automatic notification and control of the fire.&amp;lt;ref name=&amp;quot;Chr-6-157&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Chr-6-158&amp;quot; /&amp;gt; Their water may at first intensify the magnesium fire, but it protects the structure and prevents ignition of surrounding combustibles.&amp;lt;ref name=&amp;quot;Chr-6-158&amp;quot; /&amp;gt; Noncombustible materials are not harmless either: peroxides, quicklime and caustics do not burn, yet their reaction with water can start a fire in nearby combustibles.&amp;lt;ref name=&amp;quot;Dav-7-46&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-51&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Dav-7-50&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The classifications described here are those of the United States and of the international transport classes, as presented in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;.&amp;lt;ref name=&amp;quot;Wr-13-119&amp;quot; /&amp;gt; Its description of the NFPA 704 marking follows the 2001 and 2007 editions of the standard.&amp;lt;ref name=&amp;quot;Wr-13-123&amp;quot; /&amp;gt; The Division 4.3 rate of 1 L/(kg·h) is a boundary for transport classification.&amp;lt;ref name=&amp;quot;Wr-13-120&amp;quot; /&amp;gt; A transport label classifies a chemical for transport purposes only, so storage has to be based on its full fire, health and reactivity hazards.&amp;lt;ref name=&amp;quot;Dav-7-45&amp;quot; /&amp;gt; Caustics, for example, appear in the handbook both as water- and air-reactive chemicals and as corrosives, which shows that one label rarely describes all the hazards of a chemical.&amp;lt;ref name=&amp;quot;Dav-7-52&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Magnesium fire]]&lt;br /&gt;
* [[Pyrophoric material]]&lt;br /&gt;
* [[Unstable reactive material]]&lt;br /&gt;
* [[Acetylene]]&lt;br /&gt;
* [[Hazardous materials placarding]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Anderson, R. R. (2008a). Fire protection of laboratories using chemicals. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-157–9-166). National Fire Protection Association.&lt;br /&gt;
* Christman, T. (2008). Metals. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-153–6-164). National Fire Protection Association.&lt;br /&gt;
* Conroy, M. T. (2008). Fire extinguisher use and maintenance. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 17-71–17-92). National Fire Protection Association.&lt;br /&gt;
* Davenport, J. A. (2008). Storage and handling of chemicals. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-43–7-55). National Fire Protection Association.&lt;br /&gt;
* Fleming, R. P. (2002). Automatic sprinkler system calculations. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 4-72–4-87). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Frank, J. A. (2008). Characteristics and hazards of water and water additives for fire suppression. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 17-31–17-43). National Fire Protection Association.&lt;br /&gt;
* Hildebrand, M. S., &amp;amp; Noll, G. G. (2008). Public fire protection and hazmat management. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 13-81–13-98). National Fire Protection Association.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Lemoff, T. C. (2008). Gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-165–6-186). National Fire Protection Association.&lt;br /&gt;
* Scheffey, J. L. (2008). Foam extinguishing agents and systems. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 17-45–17-70). National Fire Protection Association.&lt;br /&gt;
* Scheffey, J. L., &amp;amp; Hickey, H. E. (2002). Foam system calculations. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 4-123–4-148). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Severson, P. R. (2008). Hazardous waste control. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-57–7-69). National Fire Protection Association.&lt;br /&gt;
* Slye, O. M., Jr. (2008). Flammable and combustible liquids. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-197–6-208). National Fire Protection Association.&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
* Whitford, F. (2008). Pesticides in the workplace. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-233–6-245). National Fire Protection Association.&lt;br /&gt;
* Wright, C. J. (2008a). Managing the response to hazardous material incidents. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 13-117–13-144). National Fire Protection Association.&lt;br /&gt;
* Yu, H.-Z., &amp;amp; Newman, J. S. (2008). Theory of fire extinguishment. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-79–2-92). National Fire Protection Association.&lt;br /&gt;
* Zalosh, R. (2008). Explosions. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-93–2-106). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Hazardous Materials]]&lt;/div&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
</feed>