<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Thermoplastics_and_thermosets</id>
	<title>Thermoplastics and thermosets - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Thermoplastics_and_thermosets"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;action=history"/>
	<updated>2026-11-21T23:37:07Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4815&amp;oldid=prev</id>
		<title>Linda: Remove bibliographic source lines from image captions and descriptions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4815&amp;oldid=prev"/>
		<updated>2026-11-08T07:25:10Z</updated>

		<summary type="html">&lt;p&gt;Remove bibliographic source lines from image captions and descriptions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:25, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l9&quot;&gt;Line 9:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 9:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA handbook treats polymers as one division of the non-metals and divides them into elastomers, thermosets and thermoplastics.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Its examples of thermosets are alkyds, allyls, epoxies, melamine, phenolics, polyesters, polyurethane, silicones and urea. Its examples of thermoplastics are ABS (acrylonitrile-butadiene-styrene), acetals, acrylics, cellulosics, fluoroplastics, ionomers, nylons, olefins, polycarbonate, polyester, polyimide, polystyrene and the vinyls, which include [[polyvinyl chloride]] (PVC).&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Elastomers, the synthetic rubbers, form a separate class.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA handbook treats polymers as one division of the non-metals and divides them into elastomers, thermosets and thermoplastics.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Its examples of thermosets are alkyds, allyls, epoxies, melamine, phenolics, polyesters, polyurethane, silicones and urea. Its examples of thermoplastics are ABS (acrylonitrile-butadiene-styrene), acetals, acrylics, cellulosics, fluoroplastics, ionomers, nylons, olefins, polycarbonate, polyester, polyimide, polystyrene and the vinyls, which include [[polyvinyl chloride]] (PVC).&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Elastomers, the synthetic rubbers, form a separate class.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v2.svg|thumb|upright=1.5|alt=Tree diagram: polymers split into thermosets, thermoplastics and elastomers, each with a list of example materials.|The family of polymers, with examples of thermosets, thermoplastics and elastomers&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Benedetti and Colonna (2008), p. 6-210&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v2.svg|thumb|upright=1.5|alt=Tree diagram: polymers split into thermosets, thermoplastics and elastomers, each with a list of example materials.|The family of polymers, with examples of thermosets, thermoplastics and elastomers.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Most finished plastics are not pure polymers. They contain plasticisers, colourants, fillers, stabilisers, reinforcing agents, lubricants or other additives, and the number of product formulations runs into the thousands. The final form of a product, whether solid sections, films, sheets, foams, mouldings, fibres, pellets or powders, also has a significant effect on its fire properties.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Most finished plastics are not pure polymers. They contain plasticisers, colourants, fillers, stabilisers, reinforcing agents, lubricants or other additives, and the number of product formulations runs into the thousands. The final form of a product, whether solid sections, films, sheets, foams, mouldings, fibres, pellets or powders, also has a significant effect on its fire properties.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l17&quot;&gt;Line 17:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 17:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v1.svg|thumb|upright=1.5|alt=Left: separate polymer chains that slide apart into a melt on heating. Right: a cross-linked network that stays solid and forms char.|Thermoplastics consist of separate, partly branched chains that soften and flow when heated (left). In thermosets, cross-links join the chains into a network that cannot flow; on strong heating it decomposes and tends to char (right)&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Benedetti and Colonna (2008), p. 6-210 and Beyler and Hirschler (2002), pp. 1-112, 1-123&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v1.svg|thumb|upright=1.5|alt=Left: separate polymer chains that slide apart into a melt on heating. Right: a cross-linked network that stays solid and forms char.|Thermoplastics consist of separate, partly branched chains that soften and flow when heated (left). In thermosets, cross-links join the chains into a network that cannot flow; on strong heating it decomposes and tends to char (right).]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l77&quot;&gt;Line 77:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 77:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v3.svg|thumb|upright=1.5|alt=Bar chart of net heats of combustion: polyethylene 44.6 MJ/kg highest, urea formaldehyde 14.6 MJ/kg lowest; thermoplastics and thermosets overlap.|Net heat of combustion of five thermoplastics and four thermosets&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Babrauskas (2008a), pp. 6-273–6-279&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v3.svg|thumb|upright=1.5|alt=Bar chart of net heats of combustion: polyethylene 44.6 MJ/kg highest, urea formaldehyde 14.6 MJ/kg lowest; thermoplastics and thermosets overlap.|Net heat of combustion of five thermoplastics and four thermosets.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; (2005), citing Babrauskas (2003), give piloted and autoignition temperatures by category of solid, with ± values whose statistical meaning is not specified in the table. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics are listed at 382 ± 70 °C and 469 ± 79 °C; elastomers at 318 ± 42 °C and 353 ± 56 °C. Wood, paper and cotton are listed as ranges: 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; The reported central values are higher for thermosets than for thermoplastics, but their stated ± intervals overlap.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; (2005), citing Babrauskas (2003), give piloted and autoignition temperatures by category of solid, with ± values whose statistical meaning is not specified in the table. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics are listed at 382 ± 70 °C and 469 ± 79 °C; elastomers at 318 ± 42 °C and 353 ± 56 °C. Wood, paper and cotton are listed as ranges: 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; The reported central values are higher for thermosets than for thermoplastics, but their stated ± intervals overlap.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v4.svg|thumb|upright=1.5|alt=Dot plot of reported ignition temperature values and ± intervals for thermoplastics, thermosets, halogenated plastics and elastomers; wood is shown as a range.|Reported piloted and autoignition temperatures for categories of solids. The cited table does not define the statistical meaning of ±&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-thermoplastics-and-thermosets-v4.svg|thumb|upright=1.5|alt=Dot plot of reported ignition temperature values and ± intervals for thermoplastics, thermosets, halogenated plastics and elastomers; wood is shown as a range.|Reported piloted and autoignition temperatures for categories of solids. The cited table does not define the statistical meaning of ±.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4465:rev-4815:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4465&amp;oldid=prev</id>
		<title>Lisa: Add 4 watermarked NFPA SVG illustrations</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4465&amp;oldid=prev"/>
		<updated>2026-11-08T06:51:20Z</updated>

		<summary type="html">&lt;p&gt;Add 4 watermarked NFPA SVG illustrations&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 07:51, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l9&quot;&gt;Line 9:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 9:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA handbook treats polymers as one division of the non-metals and divides them into elastomers, thermosets and thermoplastics.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Its examples of thermosets are alkyds, allyls, epoxies, melamine, phenolics, polyesters, polyurethane, silicones and urea. Its examples of thermoplastics are ABS (acrylonitrile-butadiene-styrene), acetals, acrylics, cellulosics, fluoroplastics, ionomers, nylons, olefins, polycarbonate, polyester, polyimide, polystyrene and the vinyls, which include [[polyvinyl chloride]] (PVC).&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Elastomers, the synthetic rubbers, form a separate class.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA handbook treats polymers as one division of the non-metals and divides them into elastomers, thermosets and thermoplastics.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Its examples of thermosets are alkyds, allyls, epoxies, melamine, phenolics, polyesters, polyurethane, silicones and urea. Its examples of thermoplastics are ABS (acrylonitrile-butadiene-styrene), acetals, acrylics, cellulosics, fluoroplastics, ionomers, nylons, olefins, polycarbonate, polyester, polyimide, polystyrene and the vinyls, which include [[polyvinyl chloride]] (PVC).&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Elastomers, the synthetic rubbers, form a separate class.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-thermoplastics-and-thermosets-v2.svg|thumb|upright=1.5|alt=Tree diagram: polymers split into thermosets, thermoplastics and elastomers, each with a list of example materials.|The family of polymers, with examples of thermosets, thermoplastics and elastomers. Based on Benedetti and Colonna (2008), p. 6-210.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Most finished plastics are not pure polymers. They contain plasticisers, colourants, fillers, stabilisers, reinforcing agents, lubricants or other additives, and the number of product formulations runs into the thousands. The final form of a product, whether solid sections, films, sheets, foams, mouldings, fibres, pellets or powders, also has a significant effect on its fire properties.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Most finished plastics are not pure polymers. They contain plasticisers, colourants, fillers, stabilisers, reinforcing agents, lubricants or other additives, and the number of product formulations runs into the thousands. The final form of a product, whether solid sections, films, sheets, foams, mouldings, fibres, pellets or powders, also has a significant effect on its fire properties.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l16&quot;&gt;Line 16:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 17:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-thermoplastics-and-thermosets-v1.svg|thumb|upright=1.5|alt=Left: separate polymer chains that slide apart into a melt on heating. Right: a cross-linked network that stays solid and forms char.|Thermoplastics consist of separate, partly branched chains that soften and flow when heated (left). In thermosets, cross-links join the chains into a network that cannot flow; on strong heating it decomposes and tends to char (right). Based on Benedetti and Colonna (2008), p. 6-210 and Beyler and Hirschler (2002), pp. 1-112, 1-123.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l75&quot;&gt;Line 75:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 77:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-thermoplastics-and-thermosets-v3.svg|thumb|upright=1.5|alt=Bar chart of net heats of combustion: polyethylene 44.6 MJ/kg highest, urea formaldehyde 14.6 MJ/kg lowest; thermoplastics and thermosets overlap.|Net heat of combustion of five thermoplastics and four thermosets. Based on Babrauskas (2008a), pp. 6-273–6-279.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; (2005), citing Babrauskas (2003), give piloted and autoignition temperatures by category of solid, with ± values whose statistical meaning is not specified in the table. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics are listed at 382 ± 70 °C and 469 ± 79 °C; elastomers at 318 ± 42 °C and 353 ± 56 °C. Wood, paper and cotton are listed as ranges: 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; The reported central values are higher for thermosets than for thermoplastics, but their stated ± intervals overlap.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; (2005), citing Babrauskas (2003), give piloted and autoignition temperatures by category of solid, with ± values whose statistical meaning is not specified in the table. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics are listed at 382 ± 70 °C and 469 ± 79 °C; elastomers at 318 ± 42 °C and 353 ± 56 °C. Wood, paper and cotton are listed as ranges: 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; The reported central values are higher for thermosets than for thermoplastics, but their stated ± intervals overlap.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-thermoplastics-and-thermosets-v4.svg|thumb|upright=1.5|alt=Dot plot of reported ignition temperature values and ± intervals for thermoplastics, thermosets, halogenated plastics and elastomers; wood is shown as a range.|Reported piloted and autoignition temperatures for categories of solids. The cited table does not define the statistical meaning of ±. Based on Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4296:rev-4465:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Lisa</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4296&amp;oldid=prev</id>
		<title>Peter: FSE wiki: Fact-check: limit melting and storage claims; clarify ignition intervals and historical fire-rating statement (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=4296&amp;oldid=prev"/>
		<updated>2026-11-08T02:41:29Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Fact-check: limit melting and storage claims; clarify ignition intervals and historical fire-rating statement (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 03:41, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Thermoplastics and thermosets&amp;#039;&amp;#039;&amp;#039; are the two groups into which plastics are divided according to their response to heat. A thermoplastic can be softened by heating and hardened by cooling again and again, and in the softened state it can be shaped by flow, for example by moulding or extrusion. A thermoset has been cured by heat or by other means and is then substantially infusible and insoluble.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; The difference lies in the structure of the molecules. Rigid, cross-linked molecules give a thermosetting plastic, while more flexible chains that are not rigidly linked to each other give a thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Thermoplastics and thermosets&amp;#039;&amp;#039;&amp;#039; are the two groups into which plastics are divided according to their response to heat. A thermoplastic can be softened by heating and hardened by cooling again and again, and in the softened state it can be shaped by flow, for example by moulding or extrusion. A thermoset has been cured by heat or by other means and is then substantially infusible and insoluble.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; The difference lies in the structure of the molecules. Rigid, cross-linked molecules give a thermosetting plastic, while more flexible chains that are not rigidly linked to each other give a thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a fire the distinction shapes how a plastic burns. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Thermoplastics &lt;/del&gt;melt &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and can &lt;/del&gt;form a burning pool with a large surface area&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, whereas thermosets &lt;/del&gt;stay solid, tend to form a char and generally burn more slowly.&amp;lt;ref name=&quot;CU-2-50&quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt; Melting thermoplastics can also produce flaming drips that start secondary fires.&amp;lt;ref name=&quot;BC-6-225&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-225.&amp;lt;/ref&amp;gt; Both groups are combustible, and the form of a product, its additives and the fire exposure often matter as much as the group to which its polymer belongs.&amp;lt;ref name=&quot;BC-6-211&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-211.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;GB-6-12&quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; In the United States, the plastics grouping used for sprinkler protection, as described in the 2008 edition of the &#039;&#039;Fire Protection Handbook&#039;&#039;, places common thermoplastics such as polyethylene and polystyrene in the most hazardous group.&amp;lt;ref name=&quot;GO-16-73&quot;&amp;gt;Golinveaux (2008), p. 16-73.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a fire the distinction shapes how a plastic burns. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Many thermoplastics &lt;/ins&gt;melt&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;; the melt may &lt;/ins&gt;form a burning pool with a large surface area&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Thermosets &lt;/ins&gt;stay solid, tend to form a char and generally burn more slowly.&amp;lt;ref name=&quot;CU-2-50&quot;&amp;gt;Custer (2008), p. 2-50&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;BH-1-123&quot;&amp;gt;Beyler and Hirschler (2002), p. 1-123&lt;/ins&gt;.&amp;lt;/ref&amp;gt; Melting thermoplastics can also produce flaming drips that start secondary fires.&amp;lt;ref name=&quot;BC-6-225&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-225.&amp;lt;/ref&amp;gt; Both groups are combustible, and the form of a product, its additives and the fire exposure often matter as much as the group to which its polymer belongs.&amp;lt;ref name=&quot;BC-6-211&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-211.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;GB-6-12&quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; In the United States, the plastics grouping used for sprinkler protection, as described in the 2008 edition of the &#039;&#039;Fire Protection Handbook&#039;&#039;, places common thermoplastics such as polyethylene and polystyrene in the most hazardous group.&amp;lt;ref name=&quot;GO-16-73&quot;&amp;gt;Golinveaux (2008), p. 16-73.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Definitions and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Definitions and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l15&quot;&gt;Line 15:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 15:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Polymers are very large molecules formed in polymerisation reactions, which link small molecules into larger ones that contain repeating structural units.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Ouellette illustrates this with polyethylene. Its starting molecule, ethylene, is a gas with a molecular weight of 28. A chain of 6 of these units is a liquid, 35 units give a grease and 140 units a wax. At 430 units the molecular weight reaches 12,000 and the product is a hard resin.&amp;lt;ref name=&amp;quot;OU-9-54&amp;quot;&amp;gt;Ouellette (2008), p. 9-54.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Polymers are very large molecules formed in polymerisation reactions, which link small molecules into larger ones that contain repeating structural units.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Ouellette illustrates this with polyethylene. Its starting molecule, ethylene, is a gas with a molecular weight of 28. A chain of 6 of these units is a liquid, 35 units give a grease and 140 units a wax. At 430 units the molecular weight reaches 12,000 and the product is a hard resin.&amp;lt;ref name=&amp;quot;OU-9-54&amp;quot;&amp;gt;Ouellette (2008), p. 9-54.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&quot;BC-6-210&quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&quot;BH-1-123&quot;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt;Beyler and Hirschler (2002), p. 1-123.&amp;lt;&lt;/del&gt;/&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;ref&lt;/del&gt;&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&quot;BC-6-210&quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&quot;BH-1-123&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l46&quot;&gt;Line 46:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 46:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests on office workstations for the World Trade Center investigation, the thermoplastic fabric on the privacy panels melted and rolled downward into a mass with much less surface area before it ignited. Its contribution to the peak heat release rate was therefore negligible. The office chair consisted largely of thermoplastic materials and approached its peak burning rate only when its support shell began to melt and flow to the floor.&amp;lt;ref name=&amp;quot;OH-41&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 41.&amp;lt;/ref&amp;gt; Because such behaviour could not be predicted from cone calorimeter results alone, the computer simulations used cone calorimeter data directly only for the carpet, the desk and the privacy panels. The carpet and the panels were modelled as thermoplastics, with a burning rate proportional to the heat flux from the surroundings. The desk was modelled as a charring solid, in which a pyrolysis front leaves an insulating layer of char behind.&amp;lt;ref name=&amp;quot;OH-61&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 61.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests on office workstations for the World Trade Center investigation, the thermoplastic fabric on the privacy panels melted and rolled downward into a mass with much less surface area before it ignited. Its contribution to the peak heat release rate was therefore negligible. The office chair consisted largely of thermoplastic materials and approached its peak burning rate only when its support shell began to melt and flow to the floor.&amp;lt;ref name=&amp;quot;OH-41&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 41.&amp;lt;/ref&amp;gt; Because such behaviour could not be predicted from cone calorimeter results alone, the computer simulations used cone calorimeter data directly only for the carpet, the desk and the privacy panels. The carpet and the panels were modelled as thermoplastics, with a burning rate proportional to the heat flux from the surroundings. The desk was modelled as a charring solid, in which a pyrolysis front leaves an insulating layer of char behind.&amp;lt;ref name=&amp;quot;OH-61&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 61.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage the hazard depends on chemical composition, physical form and storage arrangement. Ouellette &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;names &lt;/del&gt;polystyrene, ABS, polyurethane, polyethylene, polypropylene &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and &lt;/del&gt;plasticised PVC &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;as thermoplastics &lt;/del&gt;that present a fire hazard&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, and thermosets such as polyesters to a lesser extent&lt;/del&gt;. In a fire these materials &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;can &lt;/del&gt;melt or break down into &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;their &lt;/del&gt;monomers or &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;into &lt;/del&gt;compounds of lower molecular weight, which &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;act and &lt;/del&gt;burn like flammable liquids. Fluorocarbons, unplasticised PVC and phenolics, by contrast, can be protected in the same way as ordinary Class III commodities such as wood and paper.&amp;lt;ref name=&quot;OU-9-63&quot;&amp;gt;Ouellette (2008), p. 9-63.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage the hazard depends on chemical composition, physical form and storage arrangement. Ouellette &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;lists &lt;/ins&gt;polystyrene, ABS, polyurethane, polyethylene, polypropylene&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, &lt;/ins&gt;plasticised PVC &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and polyester thermosets among plastics &lt;/ins&gt;that &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;can &lt;/ins&gt;present a &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;storage &lt;/ins&gt;fire hazard. In a fire these materials &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;may &lt;/ins&gt;melt or break down into monomers or compounds of lower molecular weight, which &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;can &lt;/ins&gt;burn like flammable liquids. Fluorocarbons, unplasticised PVC and phenolics, by contrast, can be protected in the same way as ordinary Class III commodities such as wood and paper.&amp;lt;ref name=&quot;OU-9-63&quot;&amp;gt;Ouellette (2008), p. 9-63.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Typical property values ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Typical property values ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l76&quot;&gt;Line 76:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 76:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &#039;&#039;International Fire Engineering Guidelines&#039;&#039; (2005), citing Babrauskas (2003), give &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;mean &lt;/del&gt;piloted and autoignition temperatures by category of solid. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;reach &lt;/del&gt;382 ± 70 °C and 469 ± 79 °C&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, &lt;/del&gt;elastomers 318 ± 42 °C and 353 ± 56 °C&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, and wood&lt;/del&gt;, paper and cotton 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&quot;IFEG-3.3-4&quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;On average &lt;/del&gt;thermosets &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;therefore ignite at higher temperatures&lt;/del&gt;, but &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;the scatter within each category is wide and the ranges &lt;/del&gt;overlap.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ignition temperatures show a similar spread. The &#039;&#039;International Fire Engineering Guidelines&#039;&#039; (2005), citing Babrauskas (2003), give piloted and autoignition temperatures by category of solid&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, with ± values whose statistical meaning is not specified in the table&lt;/ins&gt;. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;are listed at &lt;/ins&gt;382 ± 70 °C and 469 ± 79 °C&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;; &lt;/ins&gt;elastomers &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;at &lt;/ins&gt;318 ± 42 °C and 353 ± 56 °C&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Wood&lt;/ins&gt;, paper and cotton &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;are listed as ranges: &lt;/ins&gt;250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&quot;IFEG-3.3-4&quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The reported central values are higher for &lt;/ins&gt;thermosets &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;than for thermoplastics&lt;/ins&gt;, but &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;their stated ± intervals &lt;/ins&gt;overlap.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l88&quot;&gt;Line 88:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 88:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Flame retardant]]s are added to both groups during manufacture. They may be blended into the polymer mix or react with it and change its molecular structure. Halogen compounds tend to inhibit burning in the gas phase, while phosphorus compounds promote char formation and can form a glassy insulating layer. A retardant that works in one polymer does not necessarily work in another, so a system for polystyrene will not necessarily work for polyethylene or nylon.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; Retardants are effective against small, short exposures, but in a severe exposure such as a fully developed room fire, treated and untreated plastics typically behave alike.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Flame retardant]]s are added to both groups during manufacture. They may be blended into the polymer mix or react with it and change its molecular structure. Halogen compounds tend to inhibit burning in the gas phase, while phosphorus compounds promote char formation and can form a glassy insulating layer. A retardant that works in one polymer does not necessarily work in another, so a system for polystyrene will not necessarily work for polyethylene or nylon.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; Retardants are effective against small, short exposures, but in a severe exposure such as a fully developed room fire, treated and untreated plastics typically behave alike.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A common misconception is that thermosets do not burn. All plastics are combustible to varying degrees, and plastics other than cellulose nitrate are classed as ordinary combustibles for fire fighting.&amp;lt;ref name=&quot;BC-6-230&quot; /&amp;gt; Inherently fire-resistant polymers and polymers with fire-retardant additives still burn under severe enough thermal conditions.&amp;lt;ref name=&quot;GB-6-12&quot; /&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The &lt;/del&gt;lack of stability at high temperature and &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;the &lt;/del&gt;inherent combustibility &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;of plastics have so far &lt;/del&gt;ruled &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;them &lt;/del&gt;out where fire-resistance ratings &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;are &lt;/del&gt;required. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;One exception is &lt;/del&gt;special silicone foams for sealing openings in fire walls.&amp;lt;ref name=&quot;BC-6-211&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A common misconception is that thermosets do not burn. All plastics are combustible to varying degrees, and plastics other than cellulose nitrate are classed as ordinary combustibles for fire fighting.&amp;lt;ref name=&quot;BC-6-230&quot; /&amp;gt; Inherently fire-resistant polymers and polymers with fire-retardant additives still burn under severe enough thermal conditions.&amp;lt;ref name=&quot;GB-6-12&quot; /&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;In the 2008 handbook, Benedetti and Colonna stated that &lt;/ins&gt;lack of stability at high temperature and inherent combustibility &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;had generally &lt;/ins&gt;ruled out &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;plastics &lt;/ins&gt;where fire-resistance ratings &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;were &lt;/ins&gt;required. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;They identified &lt;/ins&gt;special silicone foams for sealing openings in fire walls &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;as an exception&lt;/ins&gt;.&amp;lt;ref name=&quot;BC-6-211&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The opposite misconception, that thermoplastics are always easy to ignite, is also wrong. Thermoplastic textile fibres such as nylon, olefin and polyester shrink away from a heat source and are generally more difficult to ignite than fabrics containing cellulose.&amp;lt;ref name=&amp;quot;SC-6-79&amp;quot;&amp;gt;Stull and Chines (2008), p. 6-79.&amp;lt;/ref&amp;gt; Medium and heavy thermoplastic upholstery fabrics generally resist ignition by cigarettes, although they do not resist flame ignition.&amp;lt;ref name=&amp;quot;BA-6-103&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-103.&amp;lt;/ref&amp;gt; The handbook lists polyurethane among the thermosets, yet polyurethanes can also be made thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In a fire, flexible [[polyurethane foam]] can form a pool of burning liquid, similar to a fire in a combustible liquid with a high flash point.&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The opposite misconception, that thermoplastics are always easy to ignite, is also wrong. Thermoplastic textile fibres such as nylon, olefin and polyester shrink away from a heat source and are generally more difficult to ignite than fabrics containing cellulose.&amp;lt;ref name=&amp;quot;SC-6-79&amp;quot;&amp;gt;Stull and Chines (2008), p. 6-79.&amp;lt;/ref&amp;gt; Medium and heavy thermoplastic upholstery fabrics generally resist ignition by cigarettes, although they do not resist flame ignition.&amp;lt;ref name=&amp;quot;BA-6-103&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-103.&amp;lt;/ref&amp;gt; The handbook lists polyurethane among the thermosets, yet polyurethanes can also be made thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In a fire, flexible [[polyurethane foam]] can form a pool of burning liquid, similar to a fire in a combustible liquid with a high flash point.&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-2941:rev-4296:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=2941&amp;oldid=prev</id>
		<title>Peter: New FSE wiki article: Thermoplastics and thermosets (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Thermoplastics_and_thermosets&amp;diff=2941&amp;oldid=prev"/>
		<updated>2026-11-07T21:01:50Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Thermoplastics and thermosets (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Thermoplastics and thermosets&amp;#039;&amp;#039;&amp;#039; are the two groups into which plastics are divided according to their response to heat. A thermoplastic can be softened by heating and hardened by cooling again and again, and in the softened state it can be shaped by flow, for example by moulding or extrusion. A thermoset has been cured by heat or by other means and is then substantially infusible and insoluble.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; The difference lies in the structure of the molecules. Rigid, cross-linked molecules give a thermosetting plastic, while more flexible chains that are not rigidly linked to each other give a thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In a fire the distinction shapes how a plastic burns. Thermoplastics melt and can form a burning pool with a large surface area, whereas thermosets stay solid, tend to form a char and generally burn more slowly.&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt; Melting thermoplastics can also produce flaming drips that start secondary fires.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-225.&amp;lt;/ref&amp;gt; Both groups are combustible, and the form of a product, its additives and the fire exposure often matter as much as the group to which its polymer belongs.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-211.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; In the United States, the plastics grouping used for sprinkler protection, as described in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, places common thermoplastics such as polyethylene and polystyrene in the most hazardous group.&amp;lt;ref name=&amp;quot;GO-16-73&amp;quot;&amp;gt;Golinveaux (2008), p. 16-73.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Definitions and classification ==&lt;br /&gt;
The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; uses the ASTM definitions. A plastic is a material that contains one or more organic polymeric substances of large molecular weight as an essential ingredient. It is solid in its finished state, and at some stage of its manufacture or processing it can be shaped by flow.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; The definitions of thermoplastic and thermoset given in the lead come from the same list of terms. The handbook chapter on the plastics industry repeats them and states that, whatever their properties or form, all plastics fall into one of these two groups.&amp;lt;ref name=&amp;quot;OU-9-53&amp;quot;&amp;gt;Ouellette (2008), p. 9-53.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;OU-9-56&amp;quot;&amp;gt;Ouellette (2008), pp. 9-56–9-57.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In the &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039;, Beyler and Hirschler classify polymers by their physical properties, in particular the elastic modulus and the elongation at fracture. This gives three classes: elastomers, plastics and fibres. Elastomers have elastic moduli of 10&amp;lt;sup&amp;gt;5&amp;lt;/sup&amp;gt; to 10&amp;lt;sup&amp;gt;6&amp;lt;/sup&amp;gt; N/m² and can be stretched by roughly 500 to 1,000 %. Plastics have moduli of 10&amp;lt;sup&amp;gt;7&amp;lt;/sup&amp;gt; to 10&amp;lt;sup&amp;gt;8&amp;lt;/sup&amp;gt; N/m² and elongations of 100 to 200 %, and fibres have moduli of 10&amp;lt;sup&amp;gt;9&amp;lt;/sup&amp;gt; to 10&amp;lt;sup&amp;gt;10&amp;lt;/sup&amp;gt; N/m² and break after 10 to 30 %.&amp;lt;ref name=&amp;quot;BH-1-111&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-111.&amp;lt;/ref&amp;gt; Within the plastics they separate thermoplastics, whose deformation at elevated temperatures is reversible, from thermosets, which undergo irreversible changes when heated.&amp;lt;ref name=&amp;quot;BH-1-111&amp;quot; /&amp;gt; The two definitions agree in substance: the ASTM wording stresses repeated softening and the infusible end state, while the SFPE wording stresses whether the change on heating can be reversed.&lt;br /&gt;
&lt;br /&gt;
The NFPA handbook treats polymers as one division of the non-metals and divides them into elastomers, thermosets and thermoplastics.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Its examples of thermosets are alkyds, allyls, epoxies, melamine, phenolics, polyesters, polyurethane, silicones and urea. Its examples of thermoplastics are ABS (acrylonitrile-butadiene-styrene), acetals, acrylics, cellulosics, fluoroplastics, ionomers, nylons, olefins, polycarbonate, polyester, polyimide, polystyrene and the vinyls, which include [[polyvinyl chloride]] (PVC).&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Elastomers, the synthetic rubbers, form a separate class.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Most finished plastics are not pure polymers. They contain plasticisers, colourants, fillers, stabilisers, reinforcing agents, lubricants or other additives, and the number of product formulations runs into the thousands. The final form of a product, whether solid sections, films, sheets, foams, mouldings, fibres, pellets or powders, also has a significant effect on its fire properties.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Molecular structure ==&lt;br /&gt;
Polymers are very large molecules formed in polymerisation reactions, which link small molecules into larger ones that contain repeating structural units.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Ouellette illustrates this with polyethylene. Its starting molecule, ethylene, is a gas with a molecular weight of 28. A chain of 6 of these units is a liquid, 35 units give a grease and 140 units a wax. At 430 units the molecular weight reaches 12,000 and the product is a hard resin.&amp;lt;ref name=&amp;quot;OU-9-54&amp;quot;&amp;gt;Ouellette (2008), p. 9-54.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The step that separates the two groups is cross-linking. Cross-linking is the formation of chemical bonds between adjacent molecules, which creates a network that reduces solubility or resists flow on heating. When the plastic becomes highly resistant to flow at all temperatures up to thermal decomposition, it is called a thermoset.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt; Beyler and Hirschler add that cross-linking raises the melting temperature and, like stiffening of the polymer chain, can make a material infusible. Many aromatic polymers have melting temperatures above their decomposition temperatures, and this makes them thermosetting as well.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-123.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The boundary between the groups is not sharp. Thermoplastics can be cross-linked after extrusion, chemically or by irradiation, to give a thermoset product.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Polyethylene treated in this way becomes a thermoset with high heat resistance.&amp;lt;ref name=&amp;quot;BC-6-221&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-221.&amp;lt;/ref&amp;gt; Polyurethanes can be made either thermoplastic or thermosetting by varying the number of branchings in the molecule.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt; The same principle applies to rubber. Vulcanisation is a curing process that cross-links rubber, and vulcanised rubber cannot be reshaped or remoulded when it is reheated.&amp;lt;ref name=&amp;quot;BC-6-223&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-223.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Manufacture and processing ==&lt;br /&gt;
Thermosets are hardened into a permanent shape during manufacture. They usually cannot be softened by heating, and those that can be softened cannot be remelted or returned to the state they had before curing. Their components are sold as liquid monomer and polymer mixtures or as partially polymerised moulding compounds. They are usually formed with heat, sometimes under pressure, although some cure at room temperature.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; Thermoplastics do not cure or set when heated, because heat softens them. They can be softened and rehardened repeatedly, but thermal ageing eventually degrades the material and limits the number of reheating cycles.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The two groups therefore behave differently in [[plastics processing]]. Conversion into finished articles by moulding, extrusion, foaming or casting usually involves heating the plastic until it flows into a shape that it keeps on cooling. With thermoplastics no chemical reaction normally takes place. With thermosetting resins, the reaction that cross-links the material into its final, unchangeable form is a significant part of the operation.&amp;lt;ref name=&amp;quot;OU-9-55&amp;quot;&amp;gt;Ouellette (2008), p. 9-55.&amp;lt;/ref&amp;gt; For a thermoplastic, heat melts the compound and cooling hardens it in the mould; for a thermoset, heat triggers the chemical reaction that cures the resin in the mould under pressure.&amp;lt;ref name=&amp;quot;OU-9-57&amp;quot;&amp;gt;Ouellette (2008), p. 9-57.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Some processes belong mainly to one group. Blow moulding of hollow products such as bottles and fuel tanks is generally used only with thermoplastics. Compression moulding is the most common way of forming thermosets, although it can also be used for thermoplastics. Extrusion forms thermoplastics into sheet, film, tubes, rods and profiles and is used to coat wire and cable.&amp;lt;ref name=&amp;quot;OU-9-57&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;OU-9-58&amp;quot;&amp;gt;Ouellette (2008), p. 9-58.&amp;lt;/ref&amp;gt; Moulding and extrusion normally run at 149 to 343 °C (300 to 650 °F), depending on the plastic, so overheated heater bands and stuck temperature controllers are a known source of ignition in plastics plants.&amp;lt;ref name=&amp;quot;OU-9-62&amp;quot;&amp;gt;Ouellette (2008), p. 9-62.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Behaviour on heating ==&lt;br /&gt;
In &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;, [[pyrolysis]] is described as the decomposition of a material by heating, in which large molecules are broken down into smaller ones and pyrolysis gases are formed. Pyrolysis needs no oxygen, but the combustion of the gases does.&amp;lt;ref name=&amp;quot;VR-3.1&amp;quot;&amp;gt;Van Rossum (2027), §3.1.&amp;lt;/ref&amp;gt; All solid combustibles must undergo pyrolysis to produce the gaseous fuel for flaming combustion.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), p. 2-32.&amp;lt;/ref&amp;gt; Gann and Bryner note that polymers exposed to enough heat typically first undergo a phase change, such as melting in the case of thermoplastics, and then decompose chemically. Both steps absorb heat and produce volatile products of low molecular weight.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A thermoplastic can be softened without irreversible change as long as it stays below its minimum thermal decomposition temperature. Its behaviour depends on its crystallinity. A crystalline polymer has a well-defined melting temperature, whereas an amorphous polymer has a glass transition temperature above which it becomes soft and rubbery. The glass transition temperature is the upper limit for the practical use of a plastic and the lower limit for an elastomer. Most polymers are only partly crystalline, so melting usually extends over a range of 10 °C or more. Many polymers start to decompose before they melt.&amp;lt;ref name=&amp;quot;BH-1-112&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-112.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Thermoplastics such as polypropylene follow a two-step path: they melt into a liquid, and the melt then vaporises into gaseous fuel.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot; /&amp;gt; Thermoplastics generally soften and melt without forming char. Polymethyl methacrylate (PMMA) pyrolyses with very little melt and leaves no residue, but rigid PVC does char when burned.&amp;lt;ref name=&amp;quot;MS-2-33&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), p. 2-33.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Thermosets are infusible and insoluble once formed, so simple phase changes on heating are not possible. Like cellulosic materials, they have no fluid state and show no notable physical transformation before they decompose.&amp;lt;ref name=&amp;quot;BH-1-112&amp;quot; /&amp;gt; Thermoset plastics form a char layer as they pyrolyse. The char insulates the unpyrolysed fuel beneath it from the heat source and slows pyrolysis unless the external heat flux increases.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;MS-2-33&amp;quot; /&amp;gt; Phenolic resin, for example, starts to decompose at about 575 K (302 °C), and in thermogravimetric tests at 3.3 °C/min it leaves 50 to 60 % of its mass as char. Epoxy resins are less stable than phenolic resins.&amp;lt;ref name=&amp;quot;BH-1-127&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-127.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The chemistry of decomposition follows four general mechanisms: random-chain scission, end-chain scission, chain stripping and cross-linking.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-114.&amp;lt;/ref&amp;gt; In simple thermoplastics the most common reaction breaks bonds in the main polymer chain. End-chain scission releases the monomer, a process known as unzipping, while random-chain scission produces monomers, short chains called oligomers and other species. Cross-linking builds larger structures that are less easily volatilised and is therefore important in char formation.&amp;lt;ref name=&amp;quot;BH-1-118&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-118.&amp;lt;/ref&amp;gt; Charring is not restricted to thermosets, because PVC and polyacrylonitrile cross-link while they decompose. Char also has a drawback: it can sustain smouldering combustion after the flames have been reduced.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire behaviour ==&lt;br /&gt;
These differences in melting and charring are a central theme of [[plastics in fire]]. Custer explains that thermoplastics produce a liquid melt when heated. The melt may form a pool with a large surface area and release energy more rapidly than polymers that stay solid. Thermosetting materials remain solid, generally tend to form a char layer and burn more slowly.&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot; /&amp;gt; Gann and Bryner state the same tendency: highly cross-linked thermoset polymers normally burn less readily than thermoplastics.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Melting can help or harm. A thermoplastic article may melt away from the flame front, which inhibits further burning, or it may produce flaming, tar-like drips that are difficult to extinguish and can start secondary fires.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt; The rate of melting compared with the burning rate, and the viscosity of the melt, are important for the hazard. A large amount of low-viscosity, possibly flaming melt can spread fire to new surfaces, which is especially dangerous when the melting material is part of a wall or ceiling lining.&amp;lt;ref name=&amp;quot;MS-2-33&amp;quot; /&amp;gt; Beyler and Hirschler give two contrasting examples: polyethylene melts and flows readily, while high-quality cast PMMA shows only a slight tendency to flow under fire conditions.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The physical form of a thermoplastic changes its fire behaviour. Moulding pellets in bags, drums or cartons give the air little access to the surface. The same plastic moulded into hollow objects such as torch cases burns vigorously until the heat melts the shapes and reduces the exposed surface. Melting is hazardous when burning drips carry flame to a lower floor or spread fuel for later ignition.&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Foamed polymers generally burn more rapidly than the same formulation in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot; /&amp;gt; The surface flame spread of some plastics can reach about 0.6 m/s (2 ft/s), ten times the rate across most wood surfaces.&amp;lt;ref name=&amp;quot;BC-6-224&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-224.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In tests on office workstations for the World Trade Center investigation, the thermoplastic fabric on the privacy panels melted and rolled downward into a mass with much less surface area before it ignited. Its contribution to the peak heat release rate was therefore negligible. The office chair consisted largely of thermoplastic materials and approached its peak burning rate only when its support shell began to melt and flow to the floor.&amp;lt;ref name=&amp;quot;OH-41&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 41.&amp;lt;/ref&amp;gt; Because such behaviour could not be predicted from cone calorimeter results alone, the computer simulations used cone calorimeter data directly only for the carpet, the desk and the privacy panels. The carpet and the panels were modelled as thermoplastics, with a burning rate proportional to the heat flux from the surroundings. The desk was modelled as a charring solid, in which a pyrolysis front leaves an insulating layer of char behind.&amp;lt;ref name=&amp;quot;OH-61&amp;quot;&amp;gt;Ohlemiller et al. (2005), p. 61.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In storage the hazard depends on chemical composition, physical form and storage arrangement. Ouellette names polystyrene, ABS, polyurethane, polyethylene, polypropylene and plasticised PVC as thermoplastics that present a fire hazard, and thermosets such as polyesters to a lesser extent. In a fire these materials can melt or break down into their monomers or into compounds of lower molecular weight, which act and burn like flammable liquids. Fluorocarbons, unplasticised PVC and phenolics, by contrast, can be protected in the same way as ordinary Class III commodities such as wood and paper.&amp;lt;ref name=&amp;quot;OU-9-63&amp;quot;&amp;gt;Ouellette (2008), p. 9-63.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Typical property values ==&lt;br /&gt;
Table 6.17.2 of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; lists heats of combustion, per kilogram of fuel, and transition temperatures for a wide range of plastics. For thermosets it gives the entry &amp;quot;thermoset&amp;quot; in place of a melting temperature.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot;&amp;gt;Babrauskas (2008a), pp. 6-273–6-279.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-281&amp;quot;&amp;gt;Babrauskas (2008a), p. 6-281.&amp;lt;/ref&amp;gt; The table below shows selected values.&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Net heat of combustion and transition temperatures of selected plastics&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;br /&gt;
! Polymer !! Group !! Net heat of combustion (MJ/kg) !! Glass transition temperature (°C) !! Melting temperature (°C)&lt;br /&gt;
|-&lt;br /&gt;
| Polyethylene || Thermoplastic || 44.60 || −125 (high-density grade) || 120–137 (high-density grade)&lt;br /&gt;
|-&lt;br /&gt;
| Polypropylene || Thermoplastic || 43.10 || −13 || 160–176&lt;br /&gt;
|-&lt;br /&gt;
| Polystyrene || Thermoplastic || 40.51 || 100 || 110–115&lt;br /&gt;
|-&lt;br /&gt;
| Polymethyl methacrylate || Thermoplastic || 25.10 || 114 || 160–200&lt;br /&gt;
|-&lt;br /&gt;
| Polyvinyl chloride, rigid || Thermoplastic || 16.89 || 81 || 210–230&lt;br /&gt;
|-&lt;br /&gt;
| Epoxy, hardened || Thermoset || 28.90 || 120 || none (thermoset)&lt;br /&gt;
|-&lt;br /&gt;
| Phenol formaldehyde || Thermoset || 28.60 || 170 || none (thermoset)&lt;br /&gt;
|-&lt;br /&gt;
| Melamine formaldehyde || Thermoset || 18.13 || not listed || none (thermoset)&lt;br /&gt;
|-&lt;br /&gt;
| Urea formaldehyde || Thermoset || 14.61 || not listed || none (thermoset)&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The values show that the heat of combustion is not a property of the group. Among the thermoplastics listed, the net heat of combustion ranges from 16.89 MJ/kg for rigid PVC to 44.60 MJ/kg for polyethylene, a factor of about 2.6. The thermosets listed range from 14.61 to 28.90 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt; Chemical composition matters more: polymers that contain halogen atoms, such as PVC, burn with difficulty, although plasticisers increase their propensity to burn.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; Compiled transition temperatures also vary between sources. The &amp;#039;&amp;#039;SFPE Handbook&amp;#039;&amp;#039; gives PMMA a glass transition temperature of 50 °C and a melting range of 90 to 105 °C, against 114 °C and 160 to 200 °C in the NFPA table.&amp;lt;ref name=&amp;quot;BH-1-113&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-113.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-273&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Ignition temperatures show a similar spread. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; (2005), citing Babrauskas (2003), give mean piloted and autoignition temperatures by category of solid. For thermoplastics these are 369 ± 73 °C and 457 ± 63 °C, and for thermosetting plastics 441 ± 100 °C and 514 ± 92 °C. Halogenated plastics reach 382 ± 70 °C and 469 ± 79 °C, elastomers 318 ± 42 °C and 353 ± 56 °C, and wood, paper and cotton 250 to 365 °C and 250 to 400 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; On average thermosets therefore ignite at higher temperatures, but the scatter within each category is wide and the ranges overlap.&lt;br /&gt;
&lt;br /&gt;
== Fire testing and classification ==&lt;br /&gt;
Melting thermoplastics are a known problem in fire testing. When plastics were first used in construction, they were tested in the Steiner tunnel, even where the tunnel was not appropriate. Samples that cannot be held in place above the tunnel floor, or that melt and continue burning on the floor, which is typical of thermoplastics, still give results that are often misleading.&amp;lt;ref name=&amp;quot;HI-6-43&amp;quot;&amp;gt;Hirschler (2008a), p. 6-43.&amp;lt;/ref&amp;gt; In the chapter on interior finish, Hirschler advises suspicion of tunnel results for thermoplastic materials that drip to the floor of the tunnel during testing.&amp;lt;ref name=&amp;quot;HI-18-27&amp;quot;&amp;gt;Hirschler (2008b), p. 18-27.&amp;lt;/ref&amp;gt; Beyler and Hirschler make the same point more generally: many standard fire tests that allow materials to flow away from the heat source are unsuitable for assessing the hazard of flowing or dripping materials.&amp;lt;ref name=&amp;quot;BH-1-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Small-scale tests with a small, low-intensity ignition source, such as the oxygen index test (ASTM D2863) and UL 94, are used mostly for product development and production control. They are unsuitable for judging fire behaviour under room fire conditions.&amp;lt;ref name=&amp;quot;BC-6-227&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-227.&amp;lt;/ref&amp;gt; Because formulation and product form affect fire properties so strongly, the handbook stresses testing products in their end-use configuration.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt; The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; likewise note that the type of fuel likely to be present, thermoplastic or thermosetting, can affect fire dynamics and should be recorded when the fuel in a compartment is surveyed.&amp;lt;ref name=&amp;quot;IFEG-2.4-3&amp;quot;&amp;gt;Drysdale (1999), as cited in National Research Council of Canada et al. (2005), p. 2.4-3.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In the United States, NFPA standards, as described by Golinveaux (2008), place plastics into three groups for the design of sprinkler protection in storage. Group A plastics present the most severe hazard, Group B plastics behave like Class IV commodities and Group C plastics like Class III commodities. Plastics can produce about 1.5 to 3 times as much heat per unit mass as wood or paper.&amp;lt;ref name=&amp;quot;GO-16-73&amp;quot; /&amp;gt; Group A contains many thermoplastics, including ABS, acrylic, acetal, polycarbonate, polyethylene, polypropylene, polystyrene and highly plasticised PVC, but also polyurethane and fibreglass-reinforced polyester. Group C contains the thermosets melamine, phenolic and urea formaldehyde together with rigid PVC and fluoroplastics such as polytetrafluoroethylene.&amp;lt;ref name=&amp;quot;GO-16-73&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;GO-16-74&amp;quot;&amp;gt;Golinveaux (2008), p. 16-74.&amp;lt;/ref&amp;gt; The grouping thus follows fire severity rather than the thermoplastic or thermoset label.&lt;br /&gt;
&lt;br /&gt;
== Flame retardants and limits of the distinction ==&lt;br /&gt;
[[Flame retardant]]s are added to both groups during manufacture. They may be blended into the polymer mix or react with it and change its molecular structure. Halogen compounds tend to inhibit burning in the gas phase, while phosphorus compounds promote char formation and can form a glassy insulating layer. A retardant that works in one polymer does not necessarily work in another, so a system for polystyrene will not necessarily work for polyethylene or nylon.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; Retardants are effective against small, short exposures, but in a severe exposure such as a fully developed room fire, treated and untreated plastics typically behave alike.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A common misconception is that thermosets do not burn. All plastics are combustible to varying degrees, and plastics other than cellulose nitrate are classed as ordinary combustibles for fire fighting.&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot; /&amp;gt; Inherently fire-resistant polymers and polymers with fire-retardant additives still burn under severe enough thermal conditions.&amp;lt;ref name=&amp;quot;GB-6-12&amp;quot; /&amp;gt; The lack of stability at high temperature and the inherent combustibility of plastics have so far ruled them out where fire-resistance ratings are required. One exception is special silicone foams for sealing openings in fire walls.&amp;lt;ref name=&amp;quot;BC-6-211&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The opposite misconception, that thermoplastics are always easy to ignite, is also wrong. Thermoplastic textile fibres such as nylon, olefin and polyester shrink away from a heat source and are generally more difficult to ignite than fabrics containing cellulose.&amp;lt;ref name=&amp;quot;SC-6-79&amp;quot;&amp;gt;Stull and Chines (2008), p. 6-79.&amp;lt;/ref&amp;gt; Medium and heavy thermoplastic upholstery fabrics generally resist ignition by cigarettes, although they do not resist flame ignition.&amp;lt;ref name=&amp;quot;BA-6-103&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-103.&amp;lt;/ref&amp;gt; The handbook lists polyurethane among the thermosets, yet polyurethanes can also be made thermoplastic.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In a fire, flexible [[polyurethane foam]] can form a pool of burning liquid, similar to a fire in a combustible liquid with a high flash point.&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Group A plastics]]&lt;br /&gt;
* [[Rubber and elastomers]]&lt;br /&gt;
* [[Foam plastic insulation]]&lt;br /&gt;
* [[UL 94 flammability test]]&lt;br /&gt;
* [[Cellulose nitrate film]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Babrauskas, V. (2008a). Tables and charts. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-269–6-294). National Fire Protection Association.&lt;br /&gt;
* Babrauskas, V. (2008b). Upholstered furniture and mattresses. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-103–6-128). National Fire Protection Association.&lt;br /&gt;
* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;br /&gt;
* Beyler, C. L., &amp;amp; Hirschler, M. M. (2002). Thermal decomposition of polymers. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-110–1-131). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Custer, R. L. P. (2008). Dynamics of compartment fire growth. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-49–2-58). National Fire Protection Association.&lt;br /&gt;
* Gann, R. G., &amp;amp; Bryner, N. P. (2008). Combustion products and their effects on life safety. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-11–6-34). National Fire Protection Association.&lt;br /&gt;
* Golinveaux, J. E. (2008). Sprinkler systems for storage facilities. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 16-71–16-89). National Fire Protection Association.&lt;br /&gt;
* Hirschler, M. M. (2008a). Concepts and protocols of fire testing. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-35–6-60). National Fire Protection Association.&lt;br /&gt;
* Hirschler, M. M. (2008b). Interior finish. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 18-23–18-42). National Fire Protection Association.&lt;br /&gt;
* Madrzykowski, D., &amp;amp; Stroup, D. W. (2008). Flammability hazard of materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-31–2-48). National Fire Protection Association.&lt;br /&gt;
* National Research Council of Canada, International Code Council, Department of Building and Housing, &amp;amp; Australian Building Codes Board. (2005). &amp;#039;&amp;#039;International fire engineering guidelines&amp;#039;&amp;#039; (2005 ed.). Australian Building Codes Board.&lt;br /&gt;
* Ohlemiller, T. J., Mulholland, G. W., Maranghides, A., Filliben, J. J., &amp;amp; Gann, R. G. (2005). &amp;#039;&amp;#039;Fire tests of single office workstations&amp;#039;&amp;#039; (NIST NCSTAR 1-5C). National Institute of Standards and Technology.&lt;br /&gt;
* Ouellette, G. (2008). Plastics industry and related process hazards. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-53–9-65). National Fire Protection Association.&lt;br /&gt;
* Stull, J. O., &amp;amp; Chines, S. A. (2008). Fibers and textiles. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-75–6-102). National Fire Protection Association.&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
&lt;br /&gt;
[[Category:Materials &amp;amp; Fire Testing]]&lt;/div&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
</feed>