<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Sprinkler_pipe_materials</id>
	<title>Sprinkler pipe materials - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Sprinkler_pipe_materials"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;action=history"/>
	<updated>2026-11-21T22:23:07Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=9326&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 19 errors: citation (19) (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=9326&amp;oldid=prev"/>
		<updated>2026-11-15T23:42:36Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 19 errors: citation (19) (Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;amp;diff=9326&amp;amp;oldid=6228&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=6228&amp;oldid=prev</id>
		<title>Mark: Add SVG figures fse-sprinkler-pipe-materials-v1.svg, fse-sprinkler-pipe-materials-v2.svg, fse-sprinkler-pipe-materials-v3.svg (list-5 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=6228&amp;oldid=prev"/>
		<updated>2026-11-12T18:32:58Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-sprinkler-pipe-materials-v1.svg, fse-sprinkler-pipe-materials-v2.svg, fse-sprinkler-pipe-materials-v3.svg (list-5 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 19:32, 12 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l5&quot;&gt;Line 5:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 5:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Material, bore and permitted application ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Material, bore and permitted application ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[Sprinkler system|sprinkler system]] can use steel, copper and appropriately listed nonmetallic products within their stated conditions; [[Hydraulic calculation|hydraulic calculation]] needs the actual bore of the selected pipe. The [[Hazen-Williams formula]] then represents resistance using compatible condition assumptions. Pipe dimensions and product characteristics must therefore be established before a nominal size is treated as a hydraulic input. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52–4-53.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[Sprinkler system|sprinkler system]] can use steel, copper and appropriately listed nonmetallic products within their stated conditions; [[Hydraulic calculation|hydraulic calculation]] needs the actual bore of the selected pipe. The [[Hazen-Williams formula]] then represents resistance using compatible condition assumptions. Pipe dimensions and product characteristics must therefore be established before a nominal size is treated as a hydraulic input. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52–4-53.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-sprinkler-pipe-materials-v1.svg|thumb|upright=1.5|alt=Sprinkler pipe materials: functional relationships. Mechanism and application limits are distinguished.|Sprinkler pipe materials: functional relationships. Schematic explanation; dimensions are not installation instructions.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook discusses chlorinated [[Polyvinyl chloride|polyvinyl chloride]], abbreviated CPVC, as a particular sprinkler piping material; it must be distinguished from ordinary polyvinyl chloride and from an unrestricted claim about all plastic pipe. Listing conditions can govern exposure, installation and joining. The material name alone does not transfer those conditions to a different product. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook discusses chlorinated [[Polyvinyl chloride|polyvinyl chloride]], abbreviated CPVC, as a particular sprinkler piping material; it must be distinguished from ordinary polyvinyl chloride and from an unrestricted claim about all plastic pipe. Listing conditions can govern exposure, installation and joining. The material name alone does not transfer those conditions to a different product. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l12&quot;&gt;Line 12:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 13:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Pipe resistance and internal condition ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Pipe resistance and internal condition ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Moving water loses mechanical energy through interaction with pipe walls and through changes in direction or section; turbulent mixing contributes to this dissipation. The resistance depends on the actual internal bore and its condition, not simply the name printed on the pipe. Valves, elbows, entries and other fittings introduce additional local losses. &amp;lt;ref name=&amp;quot;T_4-49_4-56&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-49–4-56.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Moving water loses mechanical energy through interaction with pipe walls and through changes in direction or section; turbulent mixing contributes to this dissipation. The resistance depends on the actual internal bore and its condition, not simply the name printed on the pipe. Valves, elbows, entries and other fittings introduce additional local losses. &amp;lt;ref name=&amp;quot;T_4-49_4-56&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-49–4-56.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-sprinkler-pipe-materials-v2.svg|thumb|upright=1.5|alt=Distributed and local resistance. Mechanism and application limits are distinguished.|Distributed and local resistance. Schematic explanation; dimensions are not installation instructions.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The Darcy-Weisbach equation expresses distributed loss through a dimensionless friction factor; that factor depends on the flow regime and, for turbulent flow, on relative roughness. The Hazen-Williams formula instead uses an empirical coefficient for water service. These methods describe related hydraulic behaviour, but their coefficients do not have interchangeable meanings. &amp;lt;ref name=&amp;quot;T_4-50_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-50–4-53.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The Darcy-Weisbach equation expresses distributed loss through a dimensionless friction factor; that factor depends on the flow regime and, for turbulent flow, on relative roughness. The Hazen-Williams formula instead uses an empirical coefficient for water service. These methods describe related hydraulic behaviour, but their coefficients do not have interchangeable meanings. &amp;lt;ref name=&amp;quot;T_4-50_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-50–4-53.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l25&quot;&gt;Line 25:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 27:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Applying the Hazen-Williams relation ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Applying the Hazen-Williams relation ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The Hazen-Williams relation represents pipe friction through an empirical water-flow equation; Titus explains that its coefficient is fitted to flow behaviour rather than derived from a complete fluid-property model. Water temperature and the range of pipe conditions therefore matter to its interpretation. It is not a general-purpose equation for every liquid used in fire protection. &amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The Hazen-Williams relation represents pipe friction through an empirical water-flow equation; Titus explains that its coefficient is fitted to flow behaviour rather than derived from a complete fluid-property model. Water temperature and the range of pipe conditions therefore matter to its interpretation. It is not a general-purpose equation for every liquid used in fire protection. &amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-sprinkler-pipe-materials-v3.svg|thumb|upright=1.5|alt=Flow sensitivity of empirical friction. Mechanism and application limits are distinguished.|Flow sensitivity of empirical friction. Schematic explanation; dimensions are not installation instructions.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The following form expresses the pressure loss through a straight length in kilopascals; it is obtained by converting Titus&amp;#039;s bar-per-metre form and multiplying by pipe length. Flow is in litres per minute and actual internal diameter is in millimetres. Changing those units without changing the constant produces a different and incorrect calculation. &amp;lt;ref name=&amp;quot;T_4-52&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The following form expresses the pressure loss through a straight length in kilopascals; it is obtained by converting Titus&amp;#039;s bar-per-metre form and multiplying by pipe length. Flow is in litres per minute and actual internal diameter is in millimetres. Changing those units without changing the constant produces a different and incorrect calculation. &amp;lt;ref name=&amp;quot;T_4-52&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3887:rev-6228:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=3887&amp;oldid=prev</id>
		<title>Daan: Refine sentence flow and printed-page reference locators (written by GPT-6)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=3887&amp;oldid=prev"/>
		<updated>2026-11-07T21:40:13Z</updated>

		<summary type="html">&lt;p&gt;Refine sentence flow and printed-page reference locators (written by GPT-6)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;amp;diff=3887&amp;amp;oldid=3500&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Daan</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=3500&amp;oldid=prev</id>
		<title>Daan: New FSE wiki article: Sprinkler pipe materials (written by GPT-6)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Sprinkler_pipe_materials&amp;diff=3500&amp;oldid=prev"/>
		<updated>2026-11-07T21:28:42Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Sprinkler pipe materials (written by GPT-6)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Sprinkler pipe materials&amp;#039;&amp;#039;&amp;#039; are the pipe and joining materials used to convey water through a sprinkler installation under its specified service conditions. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot;&amp;gt;Cote (2008), ch. 16.3, pp. 16-41–16-42.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-75_4-76&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-75–4-76.&amp;lt;/ref&amp;gt; Their suitability depends on more than hydraulic roughness. Internal diameter, joining method, pressure capability, thermal exposure and support conditions all matter. A product&amp;#039;s material family does not establish that every pipe made from that material has the same permitted sprinkler application. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Sprinkler performance combines thermal operation, timely water delivery and an effective discharge pattern. These functions are related, but evidence for one does not establish all the others. The protected hazard and the installed geometry remain part of the design basis. Hydraulic calculations establish delivery under stated assumptions, while the suitability of those assumptions depends on the application and the supporting fire-performance evidence. &amp;lt;ref name=&amp;quot;F_4-72_4-75_4-85_4-87&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-72–4-75,4-85–4-87.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_16_1_16-4_16-9&amp;quot;&amp;gt;Cote (2008), ch. 16.1, pp. 16-4–16-9.&amp;lt;/ref&amp;gt; Heat access and water access can be obstructed separately. &amp;lt;ref name=&amp;quot;H_16_3_16-45_16-47&amp;quot;&amp;gt;Cote (2008), ch. 16.3, pp. 16-45–16-47.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Material, bore and permitted application ==&lt;br /&gt;
A [[Sprinkler system|sprinkler system]] can use steel, copper and appropriately listed nonmetallic products within their stated conditions. [[Hydraulic calculation]] needs the actual bore of the selected pipe. The [[Hazen-Williams formula]] then represents resistance using compatible condition assumptions. Pipe dimensions and product characteristics must therefore be established before a nominal size is treated as a hydraulic input. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52–4-53.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The handbook discusses chlorinated [[Polyvinyl chloride|polyvinyl chloride]], abbreviated CPVC, as a particular sprinkler piping material. It must be distinguished from ordinary polyvinyl chloride and from an unrestricted claim about all plastic pipe. Listing conditions can govern exposure, installation and joining. The material name alone does not transfer those conditions to a different product. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Pipe hangers]] connect the selected pipe to the building support arrangement, while temperature and movement influence integrity. [[Microbiologically influenced corrosion]] is relevant to metallic deterioration, with biological fouling representing a different concern for nonmetallic passages. These are separate mechanisms from distributed friction. Material selection consequently combines hydraulic, physical and application-specific evidence. &amp;lt;ref name=&amp;quot;H_16_4_16-55_16-58&amp;quot;&amp;gt;Cote (2008), ch. 16.4, pp. 16-55,16-58.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_15_5_15-79_15-81&amp;quot;&amp;gt;Cote (2008), ch. 15.5, pp. 15-79–15-81.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Pipe resistance and internal condition ==&lt;br /&gt;
Moving water loses mechanical energy through interaction with pipe walls and through changes in direction or section. Turbulent mixing contributes to this dissipation. The resistance depends on the actual internal bore and its condition, not simply the name printed on the pipe. Valves, elbows, entries and other fittings introduce additional local losses. &amp;lt;ref name=&amp;quot;T_4-49_4-56&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-49–4-56.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The Darcy-Weisbach equation expresses distributed loss through a dimensionless friction factor. That factor depends on the flow regime and, for turbulent flow, on relative roughness. The Hazen-Williams formula instead uses an empirical coefficient for water service. These methods describe related hydraulic behaviour, but their coefficients do not have interchangeable meanings. &amp;lt;ref name=&amp;quot;T_4-50_4-53&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-50–4-53.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
At fixed diameter and roughness coefficient, Hazen-Williams loss increases approximately with flow raised to the power 1.85. Doubling flow therefore produces considerably more than twice the loss. Increasing bore has a strong opposite effect because diameter appears with an exponent of 4.87. This explains why a short restricted connection can materially influence an otherwise generous water supply. &amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;F_4-75_4-81&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-75–4-81.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fittings can be represented by local resistance coefficients or by equivalent pipe lengths where the selected method permits. Equivalent length is a calculation device, not an extra measured length on the drawing. Its use must remain consistent with the pipe and friction assumptions behind the published value. A special valve&amp;#039;s measured pressure-loss curve may provide a better representation than a generic fitting allowance. &amp;lt;ref name=&amp;quot;T_4-56&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-56.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_15_3_15-59&amp;quot;&amp;gt;Cote (2008), ch. 15.3, pp. 15-59.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Age and deposits introduce further uncertainty. Corrosion can increase roughness, reduce the effective bore and release material that later obstructs a smaller passage. These mechanisms are distinct, so changing a roughness coefficient does not necessarily represent a local blockage. Inspection findings and flow measurements help determine whether the calculation still describes the installation. &amp;lt;ref name=&amp;quot;H_15_5_15-79_15-81&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_11_16-212&amp;quot;&amp;gt;Cote (2008), ch. 16.11, pp. 16-212.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A sound comparison keeps elevation, flow and valve state consistent between observations. A high static pressure can coexist with poor flowing performance because frictional loss emerges when water moves. Conversely, a pressure difference caused by elevation does not establish pipe deterioration. The interpretation depends on the physical route and the condition under which each reading was taken. &amp;lt;ref name=&amp;quot;T_4-47_4-52&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-47–4-52.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-81&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-81.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Applying the Hazen-Williams relation ==&lt;br /&gt;
The Hazen-Williams relation represents pipe friction through an empirical water-flow equation. Titus explains that its coefficient is fitted to flow behaviour rather than derived from a complete fluid-property model. Water temperature and the range of pipe conditions therefore matter to its interpretation. It is not a general-purpose equation for every liquid used in fire protection. &amp;lt;ref name=&amp;quot;T_4-52_4-53&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The following form expresses the pressure loss through a straight length in kilopascals. It is obtained by converting Titus&amp;#039;s bar-per-metre form and multiplying by pipe length. Flow is in litres per minute and actual internal diameter is in millimetres. Changing those units without changing the constant produces a different and incorrect calculation. &amp;lt;ref name=&amp;quot;T_4-52&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\Delta p=6.05\times10^7\frac{LQ^{1.85}}{C^{1.85}D^{4.87}}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\Delta p,L&amp;lt;/math&amp;gt; || Frictional pressure loss and pipe length || kPa; m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;Q,D&amp;lt;/math&amp;gt; || Water flow and actual internal diameter || L/min; mm&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;C&amp;lt;/math&amp;gt; || Empirical Hazen-Williams coefficient || dimensionless&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Titus compares methods using a flow of approximately 1,893 L/min through 30.48 m of pipe with a 102.26 mm internal diameter. Using a C-factor of 100 gives approximately 69.4 kPa loss by this formula. The example demonstrates the method with stated inputs; it does not prescribe that coefficient for every steel pipe. Different condition assumptions produce different predictions for the same nominal pipe. &amp;lt;ref name=&amp;quot;T_4-56&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Sensitivity can be illustrated without selecting another installation. Doubling flow at fixed diameter and C-factor multiplies the calculated loss by approximately 3.61. Reducing C from 120 to 80 multiplies loss by approximately 2.12 at unchanged flow. These recalculated ratios follow directly from the exponents and help explain why condition and demand assumptions matter. Titus cautions that Hazen-Williams becomes unsuitable for coefficients appreciably below 100, particularly for very rough pipes. The C-factor comparison therefore illustrates equation sensitivity rather than validating a severely deteriorated installation. &amp;lt;ref name=&amp;quot;T_4-52_4-54&amp;quot;&amp;gt;Titus (2002), ch. 4-2, pp. 4-52–4-54.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_15_3_15-53&amp;quot;&amp;gt;Cote (2008), ch. 15.3, pp. 15-53.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The formula describes distributed resistance, not every possible obstruction. A partially closed valve or a lodged object can create a concentrated restriction that needs separate representation. Corrosion may affect both roughness and bore, while internal debris can move during testing or operation. Treating all these effects as an arbitrary change to C can hide the physical defect being investigated. &amp;lt;ref name=&amp;quot;H_15_5_15-79_15-81&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_11_16-212&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Discharge, pressure and assigned area ==&lt;br /&gt;
Hydraulic calculation starts with the water discharge required at an individual operating sprinkler. In a density-area design, the assigned area and selected application density determine that minimum discharge. The assigned area comes from the spacing method used for the design. It is not an assertion that every point beneath the sprinkler receives an identical local quantity. &amp;lt;ref name=&amp;quot;F_4-74_4-75&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-74–4-75.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_16_1_16-6_16-8&amp;quot;&amp;gt;Cote (2008), ch. 16.1, pp. 16-6–16-8.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The discharge coefficient, or K-factor, relates flow to the square root of pressure at the sprinkler. Its numerical value depends on the units used for both quantities. A value stated for pressure in bar cannot be inserted unchanged when pressure is in kilopascals. The unit convention is part of the coefficient&amp;#039;s definition. &amp;lt;ref name=&amp;quot;H_16_2_16-25_16-26&amp;quot;&amp;gt;Cote (2008), ch. 16.2, pp. 16-25–16-26.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-75&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-75.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;q=dA_s=K\sqrt{p},\qquad p=\left(\frac{q}{K}\right)^2&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;q&amp;lt;/math&amp;gt; || Required sprinkler flow || L/min&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;d,A_s&amp;lt;/math&amp;gt; || Design density and assigned area || L/(min·m²); m²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;p&amp;lt;/math&amp;gt; || Sprinkler discharge pressure || kPa&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;K&amp;lt;/math&amp;gt; || Discharge coefficient in this convention || L/(min·√kPa)&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Using the rounded metric inputs in Fleming&amp;#039;s example, 6.1 L/(min·m²) over 15.6 m² requires 95.2 L/min. With a nominal K-factor of 8.0 L/(min·√kPa), the calculated pressure is approximately 142 kPa. The corresponding bar-based K-factor is 80 L/(min·√bar). The example illustrates the calculation method, rather than selecting a density for a new hazard. &amp;lt;ref name=&amp;quot;F_4-75&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_2_16-25_16-26&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Other sprinklers in the operating area may have greater pressure than the limiting sprinkler. Their individual discharges then exceed the minimum flow calculated from density and coverage alone. Total demand is the sum of those actual calculated flows, with applicable additional demands considered separately. Simply multiplying nominal density by nominal design area can therefore understate the hydraulic result. &amp;lt;ref name=&amp;quot;H_16_3_16-48_16-49&amp;quot;&amp;gt;Cote (2008), ch. 16.3, pp. 16-48–16-49.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-75_4-80&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-75–4-80.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A higher K-factor reduces the pressure required for a specified flow. It does not establish a particular spray pattern, response sensitivity or suitability for storage. Those characteristics depend on the complete sprinkler design and its tested application. Hydraulic equivalence is therefore narrower than equivalent fire protection performance. &amp;lt;ref name=&amp;quot;H_16_2_16-23_16-27&amp;quot;&amp;gt;Cote (2008), ch. 16.2, pp. 16-23–16-27.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_16_5_16-80&amp;quot;&amp;gt;Cote (2008), ch. 16.5, pp. 16-80.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Structural support and load transfer ==&lt;br /&gt;
Water-based piping needs a continuous path by which its weight reaches the building structure. The supported load includes the pipe and its contained water. Hangers, attachments and the structural members receiving those attachments all participate in that path. Checking a hanger rod alone cannot establish the capacity of the whole support arrangement. &amp;lt;ref name=&amp;quot;H_16_4_16-55_16-58&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;F_4-84_4-85&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-84–4-85.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A trapeze hanger introduces a spanning member between available support points. It is useful where the pipe route does not coincide with the building&amp;#039;s structural members. The member carries bending as well as transferring load to its end connections. Its span, section and load position therefore influence its behaviour. &amp;lt;ref name=&amp;quot;H_16_4_16-58&amp;quot;&amp;gt;Cote (2008), ch. 16.4, pp. 16-58.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-84&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-84.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The historical NFPA 13 provisions discussed by the handbook distinguish hanger requirements from the capacity required of the supporting structure. This prevents a single component factor from being applied indiscriminately to every part of the assembly. The source describes trapezes as an extension of the building support arrangement. The engineering assessment follows the actual load path and the relevant design basis. &amp;lt;ref name=&amp;quot;H_16_4_16-58&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fleming gives an equivalent-span method for a single off-centre load on a trapeze. The relation compares the bending effect with a centred load on an equivalent span. &amp;lt;ref name=&amp;quot;F_4-84&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;L_e=\frac{4ab}{a+b}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;L_e&amp;lt;/math&amp;gt; || Equivalent centred span || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;a,b&amp;lt;/math&amp;gt; || Distances from the load to the respective supports || m&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The source illustrates the relation using unequal support distances. If the distances to the end supports are 0.457 m and 2.591 m, the equivalent centred span is approximately 1.55 m. This example illustrates how load position affects bending. It does not establish the capacity of a member, connection or supporting building component. &amp;lt;ref name=&amp;quot;F_4-84&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The hydraulic route and the structural route intersect but answer different questions. Pipe diameter and material influence both water resistance and supported weight. A hydraulically adequate pipe still needs appropriate support and attachment. Conversely, a strong support system does not establish that the internal bore or available pressure meets the discharge demand. &amp;lt;ref name=&amp;quot;H_16_3_16-41_16-42&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_4_16-55_16-58&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;F_4-75_4-85&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-75–4-85.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Changes around the pipework can compromise the intended support. The handbook&amp;#039;s inspection discussion includes loose hangers and inappropriate additional loads applied to sprinkler piping. Attachment to a different structural member also changes the load path. These conditions belong to the installed system assessment, rather than being resolved by an unchanged hydraulic calculation. &amp;lt;ref name=&amp;quot;H_16_11_16-210&amp;quot;&amp;gt;Cote (2008), ch. 16.11, pp. 16-210.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;I_1_7-8&amp;quot;&amp;gt;National Research Council of Canada et al. (2005), pp. 1.7-8.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Corrosion, deposits and diagnosis ==&lt;br /&gt;
Microbiologically influenced corrosion describes microbial participation in corrosion processes. Organisms and their biofilms can change local chemistry and establish conditions that promote metal loss. The presence of bacteria does not by itself prove that they caused a particular failure. The handbook explicitly distinguishes evidence of organisms from a defensible diagnosis of their role. &amp;lt;ref name=&amp;quot;H_15_5_15-75_15-78_15-81&amp;quot;&amp;gt;Cote (2008), ch. 15.5, pp. 15-75,15-78–15-81.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Biofilms can create local differences in oxygen concentration and other chemical conditions. Deposits may maintain an aggressive local environment even after a treatment reduces viable organisms. A high microbial count is therefore not a direct measurement of corrosion rate. A low count at one sampling time likewise does not reconstruct the previous history of an affected pipe. &amp;lt;ref name=&amp;quot;H_15_5_15-79_15-81&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Both wet and dry sprinkler arrangements can be affected by internal deterioration. A dry system can retain water in low points and expose that water to oxygen in the gas supply. Water chemistry and deposits also matter in wet systems. Plastic components can experience biological fouling even though the same metallic corrosion mechanism does not apply to the plastic itself. &amp;lt;ref name=&amp;quot;H_15_5_15-79_15-81&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_11_16-211_16-212&amp;quot;&amp;gt;Cote (2008), ch. 16.11, pp. 16-211–16-212.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The consequences need separate description. Wall loss can lead to leakage or loss of integrity, while deposits increase resistance or reduce the effective bore. Detached material can migrate and obstruct a smaller downstream opening. No single roughness coefficient represents every combination of these effects. The hydraulic model and the assessment of physical condition therefore answer complementary questions. &amp;lt;ref name=&amp;quot;H_15_5_15-80_15-81&amp;quot;&amp;gt;Cote (2008), ch. 15.5, pp. 15-80–15-81.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;T_4-50_4-53&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_11_16-212&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A useful investigation combines observations of the metal, deposits, water chemistry and microbiology. The handbook cautions against assigning cause from a single test result. Cleaning and treatment also require separate evaluation because removing organisms does not restore lost wall thickness. The remaining installation must still meet its structural and hydraulic functions. &amp;lt;ref name=&amp;quot;H_15_5_15-80_15-81&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The maintenance implication is broader than finding a chemical treatment. Source-water condition, retained water, internal debris and future inspection all affect continued performance. Treatment concentrations can be difficult to control in intermittently flowing sprinkler networks. The available handbook discussion explains these limitations without providing a current product-specific treatment specification. &amp;lt;ref name=&amp;quot;H_15_5_15-81&amp;quot;&amp;gt;Cote (2008), ch. 15.5, pp. 15-81.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;I_1_7-8&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Tested applications and system boundaries ==&lt;br /&gt;
A sprinkler&amp;#039;s hydraulic coefficient is only one of its defining properties. Its orientation, temperature rating, thermal sensitivity and distribution pattern also affect performance. Special sprinklers are developed and evaluated for particular arrangements. Matching one property does not establish that another model can serve the same application. &amp;lt;ref name=&amp;quot;H_16_2_16-17_16-27&amp;quot;&amp;gt;Cote (2008), ch. 16.2, pp. 16-17–16-27.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-72_4-75&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-72–4-75.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The term listing refers here to the conditions under which equipment has been evaluated for its intended use. Those conditions can include installation position, permitted coverage, pressure and construction details. The handbook repeatedly links special sprinkler performance to these conditions. A larger orifice or faster element alone does not reproduce an established application. &amp;lt;ref name=&amp;quot;H_16_2_16-23_16-27&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;H_16_5_16-80&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The distinction is particularly clear for control-mode specific-application and early-suppression fast-response sprinklers. Their discharge criteria use specified operating sprinklers and minimum pressure for the relevant arrangement. Conventional density-area calculations use a different basis. Moving numerical values between these methods can remove the fire-test assumptions that gave the values meaning. &amp;lt;ref name=&amp;quot;H_16_5_16-79_16-83&amp;quot;&amp;gt;Cote (2008), ch. 16.5, pp. 16-79–16-83.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
System type also forms part of the boundary. A wet system delivers water differently from a dry or detection-controlled arrangement. Delays, gas evacuation and release logic can change the fire before useful water discharge begins. A criterion developed for one arrangement cannot be presumed valid for another merely because both use the same sprinkler body. &amp;lt;ref name=&amp;quot;H_16_3_16-34_16-38&amp;quot;&amp;gt;Cote (2008), ch. 16.3, pp. 16-34–16-38.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-85&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-85.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The United States NFPA provisions discussed in the 2008 handbook belong to the editions and development history reported there. Fleming&amp;#039;s SFPE chapter was published in 2002 and describes an earlier stage of the standards. These sources explain the engineering basis and historical criteria. They do not establish which edition a present jurisdiction has adopted. &amp;lt;ref name=&amp;quot;H_16_3_16-33&amp;quot;&amp;gt;Cote (2008), ch. 16.3, pp. 16-33.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;F_4-72_4-73&amp;quot;&amp;gt;Fleming (2002), ch. 4-3, pp. 4-72–4-73.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
This distinction also affects replacement and alteration. A substitute needs the performance characteristics relevant to the installation, while changes to storage or construction may require a different design basis. Maintenance preserves an existing function; a changed hazard raises a design question. Inspection records therefore need to identify both the equipment and the conditions it is intended to protect. &amp;lt;ref name=&amp;quot;H_16_11_16-205_16-210&amp;quot;&amp;gt;Cote (2008), ch. 16.11, pp. 16-205–16-210.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;H_16_5_16-72&amp;quot;&amp;gt;Cote (2008), ch. 16.5, pp. 16-72.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Pipe schedule system]]&lt;br /&gt;
* [[NFPA 13]]&lt;br /&gt;
* [[Fire control and fire suppression]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Cote, A. E. (Ed.). (2008). &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed.). National Fire Protection Association.&lt;br /&gt;
* Fleming, R. P. (2002). Automatic sprinkler system calculations. In P. J. DiNenno (Ed.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 4-72–4-87). National Fire Protection Association.&lt;br /&gt;
* National Research Council of Canada, International Code Council, Department of Building and Housing, &amp;amp; Australian Building Codes Board. (2005). &amp;#039;&amp;#039;International fire engineering guidelines&amp;#039;&amp;#039;. Australian Building Codes Board.&lt;br /&gt;
* Titus, J. J. (2002). Hydraulics. In P. J. DiNenno (Ed.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 4-44–4-71). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Fire Suppression]]&lt;/div&gt;</summary>
		<author><name>Daan</name></author>
	</entry>
</feed>