<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Semiconductor_fabrication_facility</id>
	<title>Semiconductor fabrication facility - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Semiconductor_fabrication_facility"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;action=history"/>
	<updated>2026-11-21T21:59:00Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=6776&amp;oldid=prev</id>
		<title>Mark: Remove source references from image captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=6776&amp;oldid=prev"/>
		<updated>2026-11-13T07:35:04Z</updated>

		<summary type="html">&lt;p&gt;Remove source references from image captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:35, 13 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l5&quot;&gt;Line 5:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 5:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Each step brings its own chemicals. Photoresist and its developer are the largest volumes of solvent in the fabrication area.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot; /&amp;gt; Negative photoresist is a light-sensitive polymer in a flammable organic solvent such as xylene or toluene. It is developed with xylene and washed with butyl acetate or isopropyl alcohol, whereas positive resist uses alkaline developers and deionised water.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-122.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Each step brings its own chemicals. Photoresist and its developer are the largest volumes of solvent in the fabrication area.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot; /&amp;gt; Negative photoresist is a light-sensitive polymer in a flammable organic solvent such as xylene or toluene. It is developed with xylene and washed with butyl acetate or isopropyl alcohol, whereas positive resist uses alkaline developers and deionised water.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-122.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v4.svg|thumb|upright=1.5|alt=Flow diagram of the wafer fabrication loop with hazard tags for solvents, acids, pyrophoric and toxic gases|The repeated wafer fabrication loop and the main fire hazards of each step&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on DeGiorgio and Peterkin (2008), pp. 9-121–9-123&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v4.svg|thumb|upright=1.5|alt=Flow diagram of the wafer fabrication loop with hazard tags for solvents, acids, pyrophoric and toxic gases|The repeated wafer fabrication loop and the main fire hazards of each step.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Etching removes material in the pattern left by the resist. Wet etching with acid mixtures predominates and is normally done in plastic wet benches with plastic exhaust ductwork.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; Dry etching uses reactive gases containing chlorine or fluorine in a highly energised vacuum chamber. Doping by diffusion takes place at 900 to 1300 °C, and chemical vapour deposition (CVD) builds thin films from reacting gases.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; The gases used include pyrophoric silane as a source of silicon and the highly toxic arsine, phosphine and diborane.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-127.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-128.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Etching removes material in the pattern left by the resist. Wet etching with acid mixtures predominates and is normally done in plastic wet benches with plastic exhaust ductwork.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; Dry etching uses reactive gases containing chlorine or fluorine in a highly energised vacuum chamber. Doping by diffusion takes place at 900 to 1300 °C, and chemical vapour deposition (CVD) builds thin films from reacting gases.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; The gases used include pyrophoric silane as a source of silicon and the highly toxic arsine, phosphine and diborane.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-127.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-128.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l17&quot;&gt;Line 17:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 17:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Air returns through sidewall vents, a perforated raised floor 0.3 to 1.2 m high, or openings into a basement plenum.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Between 80 and 95 percent of the supply is recirculated air. A slight positive pressure of about 40 Pa (0.15 in. water) makes leakage flow outwards.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; High-efficiency particulate air (HEPA) filters must remove 99.97 percent of 0.3 µm particles; in the United States they are tested to UL 586.&amp;lt;ref name=&amp;quot;Webb-10-72&amp;quot;&amp;gt;Webb (2008), p. 10-72.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Air returns through sidewall vents, a perforated raised floor 0.3 to 1.2 m high, or openings into a basement plenum.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Between 80 and 95 percent of the supply is recirculated air. A slight positive pressure of about 40 Pa (0.15 in. water) makes leakage flow outwards.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; High-efficiency particulate air (HEPA) filters must remove 99.97 percent of 0.3 µm particles; in the United States they are tested to UL 586.&amp;lt;ref name=&amp;quot;Webb-10-72&amp;quot;&amp;gt;Webb (2008), p. 10-72.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v1.svg|thumb|upright=1.5|alt=Cross-section of a cleanroom with HEPA ceiling, downward airflow, perforated raised floor, return plenum and recirculation fan|Air handling in a semiconductor cleanroom. Most of the air is recirculated; a slight overpressure keeps leakage flowing outwards&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on DeGiorgio and Peterkin (2008), pp. 9-125–9-126&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v1.svg|thumb|upright=1.5|alt=Cross-section of a cleanroom with HEPA ceiling, downward airflow, perforated raised floor, return plenum and recirculation fan|Air handling in a semiconductor cleanroom. Most of the air is recirculated; a slight overpressure keeps leakage flowing outwards.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a cleanroom, much of the fire loss can come from contamination. A glossary in NUREG-1805, a US Nuclear Regulatory Commission report, notes that smoke and combustion gases may cause more property damage than the fire itself in some locations, naming high-technology clean rooms as an example.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot;&amp;gt;Nolan (2000), as cited in Iqbal and Salley (2004), p. F-51.&amp;lt;/ref&amp;gt; Harmful chemicals from the smoke can be deposited on the products and make them unsuitable for use or salvage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot; /&amp;gt; Materials that meet the FM 4910 criteria produce less smoke and fewer corrosive products when they burn, which reduces such nonthermal damage.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a cleanroom, much of the fire loss can come from contamination. A glossary in NUREG-1805, a US Nuclear Regulatory Commission report, notes that smoke and combustion gases may cause more property damage than the fire itself in some locations, naming high-technology clean rooms as an example.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot;&amp;gt;Nolan (2000), as cited in Iqbal and Salley (2004), p. F-51.&amp;lt;/ref&amp;gt; Harmful chemicals from the smoke can be deposited on the products and make them unsuitable for use or salvage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot; /&amp;gt; Materials that meet the FM 4910 criteria produce less smoke and fewer corrosive products when they burn, which reduces such nonthermal damage.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l57&quot;&gt;Line 57:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 57:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Reading the table value as litres per second, a 0.25 mm orifice at a source pressure of 103.4 bar releases 1.18 L/s of silane. At an exhaust flow of 425 L/s the balance gives 0.28 percent, close to the roughly 0.26 percent read from the NFPA 318 chart; at 708 L/s it gives 0.17 against about 0.18 percent.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Silane has a lower flammability limit of 1.0 percent by volume.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; The handbook uses 25 percent of the LFL as a ventilation target where flammable vapours are released, which here means 0.25 percent.&amp;lt;ref name=&amp;quot;Lataille-8-6&amp;quot;&amp;gt;Lataille (2008), p. 8-6.&amp;lt;/ref&amp;gt; Reaching it needs 1.18/0.0025 = 472 L/s, or about 1,900 L/s with a 0.51 mm orifice.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Reading the table value as litres per second, a 0.25 mm orifice at a source pressure of 103.4 bar releases 1.18 L/s of silane. At an exhaust flow of 425 L/s the balance gives 0.28 percent, close to the roughly 0.26 percent read from the NFPA 318 chart; at 708 L/s it gives 0.17 against about 0.18 percent.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Silane has a lower flammability limit of 1.0 percent by volume.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; The handbook uses 25 percent of the LFL as a ventilation target where flammable vapours are released, which here means 0.25 percent.&amp;lt;ref name=&amp;quot;Lataille-8-6&amp;quot;&amp;gt;Lataille (2008), p. 8-6.&amp;lt;/ref&amp;gt; Reaching it needs 1.18/0.0025 = 472 L/s, or about 1,900 L/s with a 0.51 mm orifice.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v2.svg|thumb|upright=1.5|alt=Line chart of silane concentration against ventilation flow for a 0.25 mm orifice at three source pressures, with a line at 0.25 percent|Average silane concentration in a ventilated gas cabinet with a 0.25 mm restricted flow orifice, from the orifice flow divided by the exhaust flow. The dashed line marks 25 % of the lower flammability limit&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on DeGiorgio and Peterkin (2008), p. 9-127, and National Research Council of Canada et al. (2005), p. 3.3-3&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v2.svg|thumb|upright=1.5|alt=Line chart of silane concentration against ventilation flow for a 0.25 mm orifice at three source pressures, with a line at 0.25 percent|Average silane concentration in a ventilated gas cabinet with a 0.25 mm restricted flow orifice, from the orifice flow divided by the exhaust flow. The dashed line marks 25 % of the lower flammability limit.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Orifice size and source pressure thus govern the exhaust flow needed. The 25 percent target is only an illustration, since the handbook does not state the criterion NFPA 318 applies to gas cabinets.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; A pyrophoric gas may also ignite before it mixes, so the [[Flammability limits|flammability limit]] is not the only design question.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Orifice size and source pressure thus govern the exhaust flow needed. The 25 percent target is only an illustration, since the handbook does not state the criterion NFPA 318 applies to gas cabinets.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; A pyrophoric gas may also ignite before it mixes, so the [[Flammability limits|flammability limit]] is not the only design question.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l108&quot;&gt;Line 108:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 108:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A handbook example places a fire centrally between four sprinklers on a 4.5 m grid (r = 3.18 m), rated 74 °C, in air at 20 °C. For its 4.0 m ceiling the handbook obtains 810 kW.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-161.&amp;lt;/ref&amp;gt; With the fuel at floor level, the same equation gives about 970 kW for a 4.5 m ceiling and 1,900 kW for a 7.0 m ceiling (r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; 0.71 and 0.45). The higher ceiling needs a fire almost twice as large before a sprinkler can operate. The equation only shows whether the ceiling jet can reach the activation temperature; the sensing element then still needs time to heat up.&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A handbook example places a fire centrally between four sprinklers on a 4.5 m grid (r = 3.18 m), rated 74 °C, in air at 20 °C. For its 4.0 m ceiling the handbook obtains 810 kW.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-161.&amp;lt;/ref&amp;gt; With the fuel at floor level, the same equation gives about 970 kW for a 4.5 m ceiling and 1,900 kW for a 7.0 m ceiling (r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; 0.71 and 0.45). The higher ceiling needs a fire almost twice as large before a sprinkler can operate. The equation only shows whether the ceiling jet can reach the activation temperature; the sensing element then still needs time to heat up.&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v3.svg|thumb|upright=1.5|alt=Rising curve of minimum heat release rate against ceiling height from 3 to 8 m, with points at 4.5 m and 7 m|Minimum heat release rate of a steady fire that can operate a 74 °C sprinkler 3.18 m from the fire axis, by ceiling height (ambient 20 °C, thermal lag ignored)&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Budnick et al. (2008), pp. 3-160–3-161, and DeGiorgio and Peterkin (2008), pp. 9-123–9-124&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-semiconductor-fabrication-facility-v3.svg|thumb|upright=1.5|alt=Rising curve of minimum heat release rate against ceiling height from 3 to 8 m, with points at 4.5 m and 7 m|Minimum heat release rate of a steady fire that can operate a 74 °C sprinkler 3.18 m from the fire axis, by ceiling height (ambient 20 °C, thermal lag ignored).]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cleanrooms use very sensitive smoke detection. Spot-type detectors with a laser light source can be up to 100 times more sensitive than LED units and are intended for uses such as cleanrooms.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot;&amp;gt;Dungan (2008a), p. 14-22.&amp;lt;/ref&amp;gt; [[Aspirating smoke detection|Air sampling smoke detectors]] draw air through sampling pipes to a detector with an intense light source and reach very high sensitivity. Transport time limits the pipe length, smoke is diluted in proportion to the number of ports, and the flow at a single port is usually not supervised.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot; /&amp;gt; Wafer stockers can be protected by sprinklers, by high-sensitivity detection with gaseous suppression, or by nonfire-propagating FOUPs tested to FM 4911.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cleanrooms use very sensitive smoke detection. Spot-type detectors with a laser light source can be up to 100 times more sensitive than LED units and are intended for uses such as cleanrooms.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot;&amp;gt;Dungan (2008a), p. 14-22.&amp;lt;/ref&amp;gt; [[Aspirating smoke detection|Air sampling smoke detectors]] draw air through sampling pipes to a detector with an intense light source and reach very high sensitivity. Transport time limits the pipe length, smoke is diluted in proportion to the number of ports, and the flow at a single port is usually not supervised.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot; /&amp;gt; Wafer stockers can be protected by sprinklers, by high-sensitivity detection with gaseous suppression, or by nonfire-propagating FOUPs tested to FM 4911.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5855:rev-6776:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=5855&amp;oldid=prev</id>
		<title>Peter: Add SVG figures fse-semiconductor-fabrication-facility-v1.svg, fse-semiconductor-fabrication-facility-v2.svg, fse-semiconductor-fabrication-facility-v3.svg, fse-semiconductor-fabrication-facility-v4.svg (list-3 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=5855&amp;oldid=prev"/>
		<updated>2026-11-12T12:15:25Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-semiconductor-fabrication-facility-v1.svg, fse-semiconductor-fabrication-facility-v2.svg, fse-semiconductor-fabrication-facility-v3.svg, fse-semiconductor-fabrication-facility-v4.svg (list-3 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 13:15, 12 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l5&quot;&gt;Line 5:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 5:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Each step brings its own chemicals. Photoresist and its developer are the largest volumes of solvent in the fabrication area.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot; /&amp;gt; Negative photoresist is a light-sensitive polymer in a flammable organic solvent such as xylene or toluene. It is developed with xylene and washed with butyl acetate or isopropyl alcohol, whereas positive resist uses alkaline developers and deionised water.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-122.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Each step brings its own chemicals. Photoresist and its developer are the largest volumes of solvent in the fabrication area.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot; /&amp;gt; Negative photoresist is a light-sensitive polymer in a flammable organic solvent such as xylene or toluene. It is developed with xylene and washed with butyl acetate or isopropyl alcohol, whereas positive resist uses alkaline developers and deionised water.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-122.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-semiconductor-fabrication-facility-v4.svg|thumb|upright=1.5|alt=Flow diagram of the wafer fabrication loop with hazard tags for solvents, acids, pyrophoric and toxic gases|The repeated wafer fabrication loop and the main fire hazards of each step. Based on DeGiorgio and Peterkin (2008), pp. 9-121–9-123.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Etching removes material in the pattern left by the resist. Wet etching with acid mixtures predominates and is normally done in plastic wet benches with plastic exhaust ductwork.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; Dry etching uses reactive gases containing chlorine or fluorine in a highly energised vacuum chamber. Doping by diffusion takes place at 900 to 1300 °C, and chemical vapour deposition (CVD) builds thin films from reacting gases.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; The gases used include pyrophoric silane as a source of silicon and the highly toxic arsine, phosphine and diborane.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-127.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-128.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Etching removes material in the pattern left by the resist. Wet etching with acid mixtures predominates and is normally done in plastic wet benches with plastic exhaust ductwork.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; Dry etching uses reactive gases containing chlorine or fluorine in a highly energised vacuum chamber. Doping by diffusion takes place at 900 to 1300 °C, and chemical vapour deposition (CVD) builds thin films from reacting gases.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; The gases used include pyrophoric silane as a source of silicon and the highly toxic arsine, phosphine and diborane.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-127.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-128.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l16&quot;&gt;Line 16:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 17:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Air returns through sidewall vents, a perforated raised floor 0.3 to 1.2 m high, or openings into a basement plenum.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Between 80 and 95 percent of the supply is recirculated air. A slight positive pressure of about 40 Pa (0.15 in. water) makes leakage flow outwards.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; High-efficiency particulate air (HEPA) filters must remove 99.97 percent of 0.3 µm particles; in the United States they are tested to UL 586.&amp;lt;ref name=&amp;quot;Webb-10-72&amp;quot;&amp;gt;Webb (2008), p. 10-72.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Air returns through sidewall vents, a perforated raised floor 0.3 to 1.2 m high, or openings into a basement plenum.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Between 80 and 95 percent of the supply is recirculated air. A slight positive pressure of about 40 Pa (0.15 in. water) makes leakage flow outwards.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; High-efficiency particulate air (HEPA) filters must remove 99.97 percent of 0.3 µm particles; in the United States they are tested to UL 586.&amp;lt;ref name=&amp;quot;Webb-10-72&amp;quot;&amp;gt;Webb (2008), p. 10-72.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-semiconductor-fabrication-facility-v1.svg|thumb|upright=1.5|alt=Cross-section of a cleanroom with HEPA ceiling, downward airflow, perforated raised floor, return plenum and recirculation fan|Air handling in a semiconductor cleanroom. Most of the air is recirculated; a slight overpressure keeps leakage flowing outwards. Based on DeGiorgio and Peterkin (2008), pp. 9-125–9-126.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a cleanroom, much of the fire loss can come from contamination. A glossary in NUREG-1805, a US Nuclear Regulatory Commission report, notes that smoke and combustion gases may cause more property damage than the fire itself in some locations, naming high-technology clean rooms as an example.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot;&amp;gt;Nolan (2000), as cited in Iqbal and Salley (2004), p. F-51.&amp;lt;/ref&amp;gt; Harmful chemicals from the smoke can be deposited on the products and make them unsuitable for use or salvage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot; /&amp;gt; Materials that meet the FM 4910 criteria produce less smoke and fewer corrosive products when they burn, which reduces such nonthermal damage.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a cleanroom, much of the fire loss can come from contamination. A glossary in NUREG-1805, a US Nuclear Regulatory Commission report, notes that smoke and combustion gases may cause more property damage than the fire itself in some locations, naming high-technology clean rooms as an example.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot;&amp;gt;Nolan (2000), as cited in Iqbal and Salley (2004), p. F-51.&amp;lt;/ref&amp;gt; Harmful chemicals from the smoke can be deposited on the products and make them unsuitable for use or salvage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot; /&amp;gt; Materials that meet the FM 4910 criteria produce less smoke and fewer corrosive products when they burn, which reduces such nonthermal damage.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l55&quot;&gt;Line 55:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 57:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Reading the table value as litres per second, a 0.25 mm orifice at a source pressure of 103.4 bar releases 1.18 L/s of silane. At an exhaust flow of 425 L/s the balance gives 0.28 percent, close to the roughly 0.26 percent read from the NFPA 318 chart; at 708 L/s it gives 0.17 against about 0.18 percent.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Silane has a lower flammability limit of 1.0 percent by volume.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; The handbook uses 25 percent of the LFL as a ventilation target where flammable vapours are released, which here means 0.25 percent.&amp;lt;ref name=&amp;quot;Lataille-8-6&amp;quot;&amp;gt;Lataille (2008), p. 8-6.&amp;lt;/ref&amp;gt; Reaching it needs 1.18/0.0025 = 472 L/s, or about 1,900 L/s with a 0.51 mm orifice.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Reading the table value as litres per second, a 0.25 mm orifice at a source pressure of 103.4 bar releases 1.18 L/s of silane. At an exhaust flow of 425 L/s the balance gives 0.28 percent, close to the roughly 0.26 percent read from the NFPA 318 chart; at 708 L/s it gives 0.17 against about 0.18 percent.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Silane has a lower flammability limit of 1.0 percent by volume.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; The handbook uses 25 percent of the LFL as a ventilation target where flammable vapours are released, which here means 0.25 percent.&amp;lt;ref name=&amp;quot;Lataille-8-6&amp;quot;&amp;gt;Lataille (2008), p. 8-6.&amp;lt;/ref&amp;gt; Reaching it needs 1.18/0.0025 = 472 L/s, or about 1,900 L/s with a 0.51 mm orifice.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-semiconductor-fabrication-facility-v2.svg|thumb|upright=1.5|alt=Line chart of silane concentration against ventilation flow for a 0.25 mm orifice at three source pressures, with a line at 0.25 percent|Average silane concentration in a ventilated gas cabinet with a 0.25 mm restricted flow orifice, from the orifice flow divided by the exhaust flow. The dashed line marks 25 % of the lower flammability limit. Based on DeGiorgio and Peterkin (2008), p. 9-127, and National Research Council of Canada et al. (2005), p. 3.3-3.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Orifice size and source pressure thus govern the exhaust flow needed. The 25 percent target is only an illustration, since the handbook does not state the criterion NFPA 318 applies to gas cabinets.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; A pyrophoric gas may also ignite before it mixes, so the [[Flammability limits|flammability limit]] is not the only design question.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Orifice size and source pressure thus govern the exhaust flow needed. The 25 percent target is only an illustration, since the handbook does not state the criterion NFPA 318 applies to gas cabinets.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; A pyrophoric gas may also ignite before it mixes, so the [[Flammability limits|flammability limit]] is not the only design question.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l105&quot;&gt;Line 105:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 108:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A handbook example places a fire centrally between four sprinklers on a 4.5 m grid (r = 3.18 m), rated 74 °C, in air at 20 °C. For its 4.0 m ceiling the handbook obtains 810 kW.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-161.&amp;lt;/ref&amp;gt; With the fuel at floor level, the same equation gives about 970 kW for a 4.5 m ceiling and 1,900 kW for a 7.0 m ceiling (r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; 0.71 and 0.45). The higher ceiling needs a fire almost twice as large before a sprinkler can operate. The equation only shows whether the ceiling jet can reach the activation temperature; the sensing element then still needs time to heat up.&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A handbook example places a fire centrally between four sprinklers on a 4.5 m grid (r = 3.18 m), rated 74 °C, in air at 20 °C. For its 4.0 m ceiling the handbook obtains 810 kW.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-161.&amp;lt;/ref&amp;gt; With the fuel at floor level, the same equation gives about 970 kW for a 4.5 m ceiling and 1,900 kW for a 7.0 m ceiling (r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; 0.71 and 0.45). The higher ceiling needs a fire almost twice as large before a sprinkler can operate. The equation only shows whether the ceiling jet can reach the activation temperature; the sensing element then still needs time to heat up.&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-semiconductor-fabrication-facility-v3.svg|thumb|upright=1.5|alt=Rising curve of minimum heat release rate against ceiling height from 3 to 8 m, with points at 4.5 m and 7 m|Minimum heat release rate of a steady fire that can operate a 74 °C sprinkler 3.18 m from the fire axis, by ceiling height (ambient 20 °C, thermal lag ignored). Based on Budnick et al. (2008), pp. 3-160–3-161, and DeGiorgio and Peterkin (2008), pp. 9-123–9-124.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cleanrooms use very sensitive smoke detection. Spot-type detectors with a laser light source can be up to 100 times more sensitive than LED units and are intended for uses such as cleanrooms.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot;&amp;gt;Dungan (2008a), p. 14-22.&amp;lt;/ref&amp;gt; [[Aspirating smoke detection|Air sampling smoke detectors]] draw air through sampling pipes to a detector with an intense light source and reach very high sensitivity. Transport time limits the pipe length, smoke is diluted in proportion to the number of ports, and the flow at a single port is usually not supervised.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot; /&amp;gt; Wafer stockers can be protected by sprinklers, by high-sensitivity detection with gaseous suppression, or by nonfire-propagating FOUPs tested to FM 4911.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cleanrooms use very sensitive smoke detection. Spot-type detectors with a laser light source can be up to 100 times more sensitive than LED units and are intended for uses such as cleanrooms.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot;&amp;gt;Dungan (2008a), p. 14-22.&amp;lt;/ref&amp;gt; [[Aspirating smoke detection|Air sampling smoke detectors]] draw air through sampling pipes to a detector with an intense light source and reach very high sensitivity. Transport time limits the pipe length, smoke is diluted in proportion to the number of ports, and the flow at a single port is usually not supervised.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot; /&amp;gt; Wafer stockers can be protected by sprinklers, by high-sensitivity detection with gaseous suppression, or by nonfire-propagating FOUPs tested to FM 4911.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3816:rev-5855:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=3816&amp;oldid=prev</id>
		<title>Mark: FSE wiki: fact-check: hedges restored, NFPA 55 MAQ liquefied/nonliquefied, Table 9.9.1 unit reading flagged, FPI example 78 kW/m, Tewarson pages, sprinkler example context (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=3816&amp;oldid=prev"/>
		<updated>2026-11-07T21:38:23Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: fact-check: hedges restored, NFPA 55 MAQ liquefied/nonliquefied, Table 9.9.1 unit reading flagged, FPI example 78 kW/m, Tewarson pages, sprinkler example context (written by Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;amp;diff=3816&amp;amp;oldid=3074&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=3074&amp;oldid=prev</id>
		<title>Mark: New FSE wiki article: Semiconductor fabrication facility (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Semiconductor_fabrication_facility&amp;diff=3074&amp;oldid=prev"/>
		<updated>2026-11-07T21:07:41Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Semiconductor fabrication facility (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;semiconductor fabrication facility&amp;#039;&amp;#039;&amp;#039;, usually called a fab, is a plant in which integrated circuits, or chips, are built up layer by layer on thin wafers of silicon or another semiconductor material inside a cleanroom.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-119.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-120&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-120.&amp;lt;/ref&amp;gt; The finished chips present no unusual fire hazard, but the manufacturing process uses acids, alkalis, flammable liquids, flammable gases, pyrophoric gases and toxic gases.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot; /&amp;gt; The 20th edition of the NFPA &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; (2008) puts the cost of building and equipping a large facility at 2 to 3 billion US dollars.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot; /&amp;gt; Wafers in process are very susceptible to fire and smoke damage, and business interruption adds to the loss.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot; /&amp;gt; In the United States, NFPA 318, &amp;#039;&amp;#039;Standard for the Protection of Semiconductor Fabrication Facilities&amp;#039;&amp;#039;, covers construction, sprinklers, detection, ventilation, tools and chemicals; the handbook describes its 2006 edition.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-124.&amp;lt;/ref&amp;gt; The main protection themes are tools of noncombustible or nonpropagating materials, very early smoke detection, gas detection and the safe handling of pyrophoric silane.&lt;br /&gt;
&lt;br /&gt;
== Manufacturing processes and hazardous materials ==&lt;br /&gt;
Integrated circuits are made from silicon, a semiconductor whose electrical conductivity can be changed by adding minute quantities of chemicals called dopants.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot; /&amp;gt; Other semiconductor materials include gallium arsenide, germanium and indium arsenide. Raw wafers are generally bought from outside suppliers; they are sliced from crystal ingots to a thickness of 0.36 to 0.76 mm, and 300 mm wafers were widely used by 2008.&amp;lt;ref name=&amp;quot;DP-9-120&amp;quot; /&amp;gt; Inside the fab, each wafer passes through repeated steps of applying photoresist, photomasking, developing, etching, doping and deposition until the circuit is complete.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-121.&amp;lt;/ref&amp;gt; Forty or more layers of circuit patterns may be combined on a single chip.&amp;lt;ref name=&amp;quot;DP-9-120&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Each step brings its own chemicals. Photoresist and its developer are the largest volumes of solvent in the fabrication area.&amp;lt;ref name=&amp;quot;DP-9-121&amp;quot; /&amp;gt; Negative photoresist is a light-sensitive polymer in a flammable organic solvent such as xylene or toluene. It is developed with xylene and washed with butyl acetate or isopropyl alcohol, whereas positive resist uses alkaline developers and deionised water.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-122.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Etching removes material in the pattern left by the resist. Wet etching with acid mixtures predominates and is normally done in plastic wet benches with plastic exhaust ductwork.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; Dry etching uses reactive gases containing chlorine or fluorine in a highly energised vacuum chamber. Doping by diffusion takes place at 900 to 1300 °C, and chemical vapour deposition (CVD) builds thin films from reacting gases.&amp;lt;ref name=&amp;quot;DP-9-122&amp;quot; /&amp;gt; The gases used include pyrophoric silane as a source of silicon and the highly toxic arsine, phosphine and diborane.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-127.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-128.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fabs for 300 mm wafers, more than 40 of them by 2008, are highly automated.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-123.&amp;lt;/ref&amp;gt; A front-opening unified pod (FOUP) carries 24 wafers and weighs 8 kg, so overhead hoists and guided vehicles move it rather than people. FOUPs wait in stockers, which are self-contained vertical storage units inside the cleanroom. Most FOUPs are made of combustible plastics, and large-scale tests by FM Global confirmed that they are a significant fire hazard inside a stocker.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt; Their tools are 1.0 to 1.5 times larger than 200 mm tools, and etch tools draw more than 250 A at 208 V. This adds fuel and ignition energy, while fewer operators mean later discovery of a fire.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Cleanroom design and air handling ==&lt;br /&gt;
A cleanroom holds airborne particles below a stated limit, because a single microscopic dust particle can ruin a chip.&amp;lt;ref name=&amp;quot;DP-9-119&amp;quot; /&amp;gt; A Class 100,000 cleanroom holds fewer than 100,000 particles larger than 0.5 µm per cubic foot (0.028 m³), about 3.5 million per cubic metre.&amp;lt;ref name=&amp;quot;DP-9-119-120&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), pp. 9-119–9-120.&amp;lt;/ref&amp;gt; The most advanced chips need Class 1 design: fewer than one particle larger than 0.12 µm per cubic foot. For comparison, normal urban air contains about 5,000,000 particles per cubic foot and fire smoke can contain 1 trillion.&amp;lt;ref name=&amp;quot;DP-9-120&amp;quot; /&amp;gt; Wafer fabrication itself takes place in Class 1 to Class 10,000 cleanrooms.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-125.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Tewarson (2002) describes a sealed room supplied with clean air, built of noncontaminating polymers and protected against contamination from outside, from operators and from accidental fires.&amp;lt;ref name=&amp;quot;Tewarson-3-94&amp;quot;&amp;gt;Tewarson (2002), p. 3-94.&amp;lt;/ref&amp;gt; Nearly all semiconductor cleanrooms use laminar flow, in which air moves in unidirectional layers at 0.2 to 0.5 m/s (40 to 100 ft/min).&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), p. 9-126.&amp;lt;/ref&amp;gt; Up to 10 air changes per minute may occur, with typical airflows of 6 to 15 m³/min per square metre of floor (20 to 50 cfm/ft²).&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Air returns through sidewall vents, a perforated raised floor 0.3 to 1.2 m high, or openings into a basement plenum.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Between 80 and 95 percent of the supply is recirculated air. A slight positive pressure of about 40 Pa (0.15 in. water) makes leakage flow outwards.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; High-efficiency particulate air (HEPA) filters must remove 99.97 percent of 0.3 µm particles; in the United States they are tested to UL 586.&amp;lt;ref name=&amp;quot;Webb-10-72&amp;quot;&amp;gt;Webb (2008), p. 10-72.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In a cleanroom, much of the fire loss can come from contamination. A glossary in NUREG-1805, a US Nuclear Regulatory Commission report, notes that smoke damage in high-technology clean rooms can exceed the physical fire damage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot;&amp;gt;Nolan (2000), as cited in Iqbal and Salley (2004), p. F-51.&amp;lt;/ref&amp;gt; Harmful chemicals from the smoke can be deposited on the products and make them unsuitable for use or salvage.&amp;lt;ref name=&amp;quot;Nolan-F-51&amp;quot; /&amp;gt; Materials that meet the FM 4910 criteria produce less smoke and fewer corrosive products when they burn, which reduces such nonthermal damage.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire and explosion hazards ==&lt;br /&gt;
Most fab hazards, such as plating, crystal growing and flammable liquids and gases, also occur in other industries with established controls.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt; Less common are pyrophoric gases, toxic materials, radio-frequency fields, ionising radiation and the handling that chemical purity demands. For fire protection, three groups stand out: flammable liquids, flammable and pyrophoric gases, and the combustible plastics of tools and wafer carriers.&lt;br /&gt;
&lt;br /&gt;
=== Flammable liquids ===&lt;br /&gt;
Most flammable liquids in chip fabrication are alcohols and alcohol-based mixtures.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Storage and handling generally follow NFPA 30, and containers travel to the cleanroom on purpose-built carts that hold them upright and contain leaks. Liquids not in use belong in listed storage cabinets, and piped supply uses closed, dual-contained bulk dispensing.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; The flash point is the temperature at which a liquid gives off enough vapour for ignition.&amp;lt;ref name=&amp;quot;Lemoff-6-166&amp;quot;&amp;gt;Lemoff (2008), p. 6-166.&amp;lt;/ref&amp;gt; The International Fire Engineering Guidelines list flash points of 13 °C for ethanol and 4 °C for toluene.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot;&amp;gt;National Research Council of Canada et al. (2005), p. 3.3-3.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Flammable, pyrophoric and toxic gases ===&lt;br /&gt;
A [[Pyrophoric material|pyrophoric]] gas is a flammable gas that ignites spontaneously in air, without an ignition source.&amp;lt;ref name=&amp;quot;Lemoff-6-166&amp;quot; /&amp;gt; Examples are [[silane]] and phosphine, and such gases are most likely to be found in semiconductor manufacturing.&amp;lt;ref name=&amp;quot;Lemoff-6-166&amp;quot; /&amp;gt; The International Fire Engineering Guidelines give silane flammability limits of 1.0 and 100 percent by volume and an autoignition temperature of −100 °C.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; In fabs these gases may be used pure or mixed with a carrier gas such as hydrogen or nitrogen.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Released silane may ignite at once with a visible flame, or escape with no ignition or delayed ignition, possibly ending in a detonation.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; In a confined space such as a gas cabinet, silane has been known to detonate. In unconfined areas such as outdoors, pyrophoric gases usually ignite on release and then burn like other flammable gases. Their burning behaviour is not fully understood, mainly because engineering controls have prevented most uncontrolled releases.&amp;lt;ref name=&amp;quot;DP-9-126-127&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), pp. 9-126–9-127.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Pyrophoric and toxic gases should be placed outside the plant and piped to the cleanroom in welded stainless steel tubing.&amp;lt;ref name=&amp;quot;DP-9-126&amp;quot; /&amp;gt; Tools using high concentrations of pyrophoric gases need exhaust gas conditioning and continuous exhaust monitoring. Compressed Gas Association release studies led to publication P32-2000, now G-13, which sets minimum separation distances for silane systems.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; The NFPA 55 (2005) limits in the handbook allow no pyrophoric gas in an unsprinklered control area and 2.8 m³ (100 ft³) in a sprinklered area with gas cabinets.&amp;lt;ref name=&amp;quot;LR-7-39&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-39.&amp;lt;/ref&amp;gt; NFPA 55 also keeps pyrophoric cylinders 6.1 m (20 ft) from flammable, oxidising and toxic gases, unless separated by a noncombustible barrier at least 1.5 m high with a half-hour fire resistance rating.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Arsine, phosphine and diborane are highly toxic, so they are monitored continuously and treated in the tool exhaust.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt; A fixed [[gas detection system]] is needed wherever permanent gas hazards exist, and fabs are a typical application.&amp;lt;ref name=&amp;quot;Cholin-14-106&amp;quot;&amp;gt;Cholin (2008a), p. 14-106.&amp;lt;/ref&amp;gt; Smoke detector spacing rules from NFPA 72 do not apply, because a gas leak has no fire plume to carry gas to the ceiling.&amp;lt;ref name=&amp;quot;Cholin-14-106&amp;quot; /&amp;gt; Readings are usually given as a percentage of the lower flammable limit (LFL).&amp;lt;ref name=&amp;quot;Cholin-14-100&amp;quot;&amp;gt;Cholin (2008a), p. 14-100.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Combustible tools, wet benches and wafer carriers ===&lt;br /&gt;
Workstations, wet benches and other equipment are designed to release few particles and to resist process chemicals.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; The hazard of a wet bench lies in the confined spaces beneath it, vats of flammable liquid on its polypropylene surface and its collector hoods.&amp;lt;ref name=&amp;quot;Mawhinney-16-140&amp;quot;&amp;gt;Mawhinney (2008), p. 16-140.&amp;lt;/ref&amp;gt; Tools inside large minienvironments can contain thousands of pounds (roughly a tonne or more) of [[Plastics in fire|plastics]], which in most cases are shielded from the building sprinklers.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt; Until about 2000 the industry often judged these tools by the UL 94 V-0 rating, developed for small plastic appliances and never intended for them.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt; The UL 94 vertical test exposes a strip 125 mm long and 13 mm wide to a 50 W flame for 10 seconds.&amp;lt;ref name=&amp;quot;MS-2-43&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), p. 2-43.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Silane gas cabinet ventilation ==&lt;br /&gt;
NFPA 318 contains performance-based guidance on silane gas cabinet ventilation rates, based on FM Global research tests.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; The handbook reproduces two NFPA 318 (2006) data sets. One gives the silane flow through restricted flow orifices (RFOs) of 0.25 to 0.51 mm at 3.5 to 103.4 bar; the other gives the average concentration in a ventilated enclosure. For a 0.25 mm orifice at 103.4 bar (1500 psi) the table gives 1.18 and 2.50; the units are not printed, but the pairs match litres per second and cubic feet per minute. The flow through 0.36 mm and 0.25 mm orifices is 49 and 25 percent of the flow through a 0.51 mm orifice.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The concentration chart can be reproduced with a simple volume balance. If the leak mixes completely with the exhaust air, its volume fraction is the leak flow divided by the total flow. Because the leak is small, the total is close to the exhaust flow:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;C = \frac{\dot V_\mathrm{g}}{\dot V_\mathrm{g} + \dot V_\mathrm{e}} \approx \frac{\dot V_\mathrm{g}}{\dot V_\mathrm{e}}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;C&amp;lt;/math&amp;gt; || Average volume fraction of silane in the enclosure exhaust || – (or vol%)&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot V_\mathrm{g}&amp;lt;/math&amp;gt; || Silane flow through the restricted flow orifice || L/s&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot V_\mathrm{e}&amp;lt;/math&amp;gt; || Ventilation (exhaust) flow through the enclosure || L/s&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A cylinder at 103.4 bar with a 0.25 mm orifice releases 1.18 L/s of silane. At an exhaust flow of 425 L/s the balance gives 0.28 percent, close to the 0.26 percent on the NFPA 318 chart; at 708 L/s it gives 0.17 against about 0.18 percent.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Silane has a lower flammability limit of 1.0 percent by volume.&amp;lt;ref name=&amp;quot;IFEG-3.3-3&amp;quot; /&amp;gt; The handbook uses 25 percent of the LFL as a ventilation target where flammable vapours are released, which here means 0.25 percent.&amp;lt;ref name=&amp;quot;Lataille-8-6&amp;quot;&amp;gt;Lataille (2008), p. 8-6.&amp;lt;/ref&amp;gt; Reaching it needs 1.18/0.0025 = 472 L/s, or about 1,900 L/s with a 0.51 mm orifice.&lt;br /&gt;
&lt;br /&gt;
Orifice size and source pressure thus govern the exhaust flow needed. The 25 percent target is only an illustration, since the handbook does not state the criterion NFPA 318 applies to gas cabinets.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; A pyrophoric gas may also ignite before it mixes, so the [[Flammability limits|flammability limit]] is not the only design question.&lt;br /&gt;
&lt;br /&gt;
== Codes, guidelines and material testing ==&lt;br /&gt;
In the United States, NFPA 318 was first published in 1992 and was in its 2006 edition when the handbook was written.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt; It applies to any semiconductor facility with a cleanroom or clean zone. It covers construction including seismic protection, sprinkler and detection design, ventilation and local exhaust, and equipment interlocks and electrical design. Chemical storage and handling is also covered, with particular attention to gas cylinders and bulk silane systems.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt; NFPA 5000 requires buildings with cleanrooms in such facilities to be built to NFPA 318.&amp;lt;ref name=&amp;quot;DP-9-124&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The most significant change in the 2006 edition concerns the tools, which are to be of noncombustible construction.&amp;lt;ref name=&amp;quot;DP-9-127&amp;quot; /&amp;gt; Three exceptions apply: small parts, listed nonfire-propagating materials, and other controls such as sprinklers or detection and suppression systems.&amp;lt;ref name=&amp;quot;DP-9-127-128&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), pp. 9-127–9-128.&amp;lt;/ref&amp;gt; The guidelines of Semiconductor Equipment and Materials International (SEMI) follow a similar order. SEMI S14 asks first to eliminate the hazard, then to use nonpropagating materials, and only then to add detection, suppression or power shutdown.&amp;lt;ref name=&amp;quot;DP-9-124-125&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), pp. 9-124–9-125.&amp;lt;/ref&amp;gt; SEMI S2-0703A requires equipment fire risk to be assessed and reported, with suppression only where the assessment shows a need.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Nonpropagating materials are identified with FM Global Test Standard 4910, whose apparatus is the [[fire propagation apparatus]] of ASTM E2058 and whose method is NFPA 287.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt; It uses small-scale ignition, propagation and combustion tests, with a large-scale validation where needed. That check is the parallel panel test: two panels 2.4 m high facing each other across a 60 kW sand burner for 20 minutes.&amp;lt;ref name=&amp;quot;MS-2-43&amp;quot; /&amp;gt; Underwriters Laboratories developed UL 2360, based on the cone calorimeter, as an alternative route for tool plastics.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Hirschler-6-48&amp;quot;&amp;gt;Hirschler (2008a), p. 6-48.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The fire propagation index (FPI) combines resistance to ignition with the heat released during upward flame spread. The upward test uses air enriched to an oxygen mass fraction of 0.40 to simulate the flame radiation of large fires.&amp;lt;ref name=&amp;quot;Tewarson-3-92&amp;quot;&amp;gt;Tewarson (2002), p. 3-92.&amp;lt;/ref&amp;gt; The index is defined as:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\mathrm{FPI} = \frac{1000\,(0.42\,\dot Q&amp;#039;_\mathrm{ch})^{1/3}}{\mathrm{TRP}} = \frac{750\,(\dot Q&amp;#039;_\mathrm{ch})^{1/3}}{\mathrm{TRP}}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\mathrm{FPI}&amp;lt;/math&amp;gt; || Fire propagation index || (m/s&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt;)/(kW/m)&amp;lt;sup&amp;gt;2/3&amp;lt;/sup&amp;gt;&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot Q&amp;#039;_\mathrm{ch}&amp;lt;/math&amp;gt; || Chemical heat release rate per unit sample width during upward fire propagation || kW/m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\mathrm{TRP}&amp;lt;/math&amp;gt; || Thermal response parameter, which relates the time to ignition to the net heat flux || kW·s&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt;/m²&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Materials with an FPI of 6 or less are nonpropagating, and their smoke development index (SDI), the FPI times the smoke yield, must not exceed 0.4.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt; The handbook defines three classes of tested plastics. Class 1 adds a flame spread of no more than 1.2 m (4 ft) in the parallel panel test.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Tewarson (2002) takes a sheet with a TRP of 95 kW·s&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt;/m² releasing 50 kW over a width of 0.3 m, or 167 kW/m. The FPI is about 43, an accelerating Group 3 material.&amp;lt;ref name=&amp;quot;Tewarson-3-93&amp;quot;&amp;gt;Tewarson (2002), p. 3-93.&amp;lt;/ref&amp;gt; To keep the FPI at 6 or less, this TRP allows only 0.44 kW/m, whereas a cable with a TRP of 535 kW·s&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt;/m² from another example allows 79 kW/m. Highly halogenated and high-temperature polymers meet the cleanroom criteria, and polyethylene, polypropylene and PVC can be modified to do so.&amp;lt;ref name=&amp;quot;Tewarson-3-96&amp;quot;&amp;gt;Tewarson (2002), p. 3-96.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire protection measures ==&lt;br /&gt;
The handbook recommends fire-resistant buildings, with cleanrooms cut off from other areas by construction rated for at least 1 hour.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt; Because of the high values, further compartmentation is highly desirable. Recirculating air should be able to shut down in a fire or spill, while toxic process exhaust keeps running and helps remove smoke. Sprinklers inside fume exhaust ducts need care, because their discharge can significantly reduce the exhaust flow.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
According to the handbook, cleanrooms must be equipped with a fully automatic, fast-response sprinkler system.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt; Fast-response sprinklers have a [[response time index]] (RTI) of 50 m&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt;·s&amp;lt;sup&amp;gt;1/2&amp;lt;/sup&amp;gt; or less, against 80 or more for standard response.&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-160.&amp;lt;/ref&amp;gt; The ceilings of 300 mm fabs, at least 4.5 m and up to 7 m, lengthen sprinkler response, so the fire is larger when sprinklers operate.&amp;lt;ref name=&amp;quot;DP-9-123-124&amp;quot;&amp;gt;DeGiorgio and Peterkin (2008), pp. 9-123–9-124.&amp;lt;/ref&amp;gt; The handbook gives the minimum heat release rate that can operate a sprinkler in the [[ceiling jet]] for r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; &amp;gt; 0.18:&amp;lt;ref name=&amp;quot;Budnick-3-160&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\dot Q_\mathrm{min} = 0.08\,(T_\mathrm{op} - T_\infty)^{3/2}\,h_\mathrm{ceil}^{3/2}\,r&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot Q_\mathrm{min}&amp;lt;/math&amp;gt; || Total heat release rate needed to operate the sprinkler (steady fire) || kW&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;T_\mathrm{op}&amp;lt;/math&amp;gt; || Activation temperature of the sprinkler || °C&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;T_\infty&amp;lt;/math&amp;gt; || Initial ambient temperature || °C&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;h_\mathrm{ceil}&amp;lt;/math&amp;gt; || Distance from the fuel surface to the ceiling || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;r&amp;lt;/math&amp;gt; || Radial distance from the fire axis to the sprinkler || m&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; A handbook example places a fire centrally between four sprinklers on a 4.5 m grid (r = 3.18 m), rated 74 °C, in air at 20 °C.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-161.&amp;lt;/ref&amp;gt; With the fuel at floor level, the equation gives about 970 kW for a 4.5 m ceiling and 1,900 kW for a 7.0 m ceiling (r/h&amp;lt;sub&amp;gt;ceil&amp;lt;/sub&amp;gt; 0.71 and 0.45). The higher ceiling needs a fire almost twice as large before a sprinkler can operate. The real sprinkler operates later still, because the equation ignores the thermal lag of the sensing element.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Cleanrooms use very sensitive smoke detection. Spot-type detectors with a laser light source can be up to 100 times more sensitive than LED units and are intended for uses such as cleanrooms.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot;&amp;gt;Dungan (2008a), p. 14-22.&amp;lt;/ref&amp;gt; [[Aspirating smoke detection|Air sampling smoke detectors]] draw air through sampling pipes to a detector with an intense light source and reach very high sensitivity. Transport time limits the pipe length, smoke is diluted in proportion to the number of ports, and the flow at a single port is usually not supervised.&amp;lt;ref name=&amp;quot;Dungan-14-22&amp;quot; /&amp;gt; Wafer stockers can be protected by sprinklers, by high-sensitivity detection with gaseous suppression, or by nonfire-propagating FOUPs tested to FM 4911.&amp;lt;ref name=&amp;quot;DP-9-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Portable extinguishers follow an extra-hazard schedule, and carbon dioxide (CO&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt;) units are the most common type in cleanrooms.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt; Dry chemical is not recommended: the powder contaminates wafers beyond salvage, and cleaning equipment and replacing HEPA filters is expensive. Wet benches have traditionally been protected by [[Carbon dioxide extinguishing system|carbon dioxide systems]].&amp;lt;ref name=&amp;quot;Mawhinney-16-140&amp;quot; /&amp;gt; FM Global has approved [[Water mist system|water mist systems]] for them, with open nozzles, optical detectors and corrosion-resistant piping.&amp;lt;ref name=&amp;quot;Mawhinney-16-140&amp;quot; /&amp;gt; Selected equipment may also receive fine water spray or gaseous agents such as CO&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt; or FM-200.&amp;lt;ref name=&amp;quot;DP-9-125&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limits and uncertainty ==&lt;br /&gt;
The handbook describes US practice around 2008, with NFPA 318 (2006), NFPA 55 (2005) and SEMI S14-0704.&amp;lt;ref name=&amp;quot;DP-9-124-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;LR-7-39&amp;quot; /&amp;gt; Later editions may differ, and other countries apply their own rules. Pyrophoric gas burning is not fully understood, and silane separation distances rest largely on release studies.&amp;lt;ref name=&amp;quot;DP-9-126-127&amp;quot; /&amp;gt; The volume balance used above assumes complete mixing of the leak with the exhaust air.&lt;br /&gt;
&lt;br /&gt;
The ceiling-jet equations hold for horizontal, unobstructed ceilings without a smoke layer; a layer raises temperatures.&amp;lt;ref name=&amp;quot;HB-3-129&amp;quot;&amp;gt;Hurley and Bukowski (2008), p. 3-129.&amp;lt;/ref&amp;gt; Predicted operating times can be badly wrong when the gas temperature barely exceeds the activation temperature.&amp;lt;ref name=&amp;quot;Budnick-3-161&amp;quot; /&amp;gt; The FPI and SDI criteria come from bench-scale tests, although materials with a low FPI are likely to perform well in the parallel panel test.&amp;lt;ref name=&amp;quot;Hirschler-6-47&amp;quot;&amp;gt;Hirschler (2008a), p. 6-47.&amp;lt;/ref&amp;gt; Health hazards such as ionising, laser, radio-frequency and ultraviolet radiation also occur in fabs but fall outside the handbook&amp;#039;s scope.&amp;lt;ref name=&amp;quot;DP-9-128&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Laser fire hazards]]&lt;br /&gt;
* [[Chemical laboratory]]&lt;br /&gt;
* [[Laboratory fume hood]]&lt;br /&gt;
* [[Data centre fire protection]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Budnick, E. K., Hunt, S. P., &amp;amp; Wright, M. T. (2008). Closed form enclosure fire calculations. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 3-145–3-166). National Fire Protection Association.&lt;br /&gt;
* Cholin, J. M. (2008a). Gas and vapor detection systems and monitors. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 14-99–14-112). National Fire Protection Association.&lt;br /&gt;
* DeGiorgio, V., &amp;amp; Peterkin, H. (2008). Semiconductor manufacturing. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-119–9-129). National Fire Protection Association.&lt;br /&gt;
* Dungan, K. W. (2008a). Automatic fire detectors. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 14-15–14-28). National Fire Protection Association.&lt;br /&gt;
* Hirschler, M. M. (2008a). Concepts and protocols of fire testing. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-35–6-60). National Fire Protection Association.&lt;br /&gt;
* Hurley, M. J., &amp;amp; Bukowski, R. W. (2008). Fire hazard analysis techniques. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 3-121–3-134). National Fire Protection Association.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Lataille, J. I. (2008). Air-Moving equipment. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 8-3–8-15). National Fire Protection Association.&lt;br /&gt;
* Lemoff, T. C. (2008). Gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-165–6-186). National Fire Protection Association.&lt;br /&gt;
* Lemoff, T. C., &amp;amp; Rivkin, C. H. (2008). Storage of gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-35–7-42). National Fire Protection Association.&lt;br /&gt;
* Madrzykowski, D., &amp;amp; Stroup, D. W. (2008). Flammability hazard of materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-31–2-48). National Fire Protection Association.&lt;br /&gt;
* Mawhinney, J. R. (2008). Water mist fire suppression systems. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 16-135–16-180). National Fire Protection Association.&lt;br /&gt;
* National Research Council of Canada, International Code Council, Department of Building and Housing, &amp;amp; Australian Building Codes Board. (2005). &amp;#039;&amp;#039;International fire engineering guidelines&amp;#039;&amp;#039; (2005 ed.). Australian Building Codes Board.&lt;br /&gt;
* Tewarson, A. (2002). Generation of heat and chemical compounds in fires. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-82–3-161). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Webb, W. A. (2008). Air-Conditioning and ventilating systems. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 10-69–10-76). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Special Hazards &amp;amp; Building Types]]&lt;/div&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
</feed>