<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Rail_tank_car</id>
	<title>Rail tank car - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Rail_tank_car"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;action=history"/>
	<updated>2026-11-21T22:01:56Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=9249&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 1 error: typo (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=9249&amp;oldid=prev"/>
		<updated>2026-11-15T23:38:12Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 1 error: typo (Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 00:38, 16 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l42&quot;&gt;Line 42:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 42:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Markings and specification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Markings and specification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Every tank car carries reporting marks, a set of initials and a number, on both sides and both ends. An &quot;X&quot; as the last initial means that the car is privately owned, and most tank cars are owned by companies other than railroads.&amp;lt;ref name=&quot;CJW-21-125&quot; /&amp;gt; With the initials and number, shippers, carriers and responders can find the contents of the car from the railroad&#039;s computer or the shipping papers.&amp;lt;ref name=&quot;CJW-21-125&quot; /&amp;gt; The hazard class and identification number of the contents are shown separately by [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Hazardous &lt;/del&gt;materials placarding]] on both sides and both ends of the car.&amp;lt;ref name=&quot;CJW-21-112&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Every tank car carries reporting marks, a set of initials and a number, on both sides and both ends. An &quot;X&quot; as the last initial means that the car is privately owned, and most tank cars are owned by companies other than railroads.&amp;lt;ref name=&quot;CJW-21-125&quot; /&amp;gt; With the initials and number, shippers, carriers and responders can find the contents of the car from the railroad&#039;s computer or the shipping papers.&amp;lt;ref name=&quot;CJW-21-125&quot; /&amp;gt; The hazard class and identification number of the contents are shown separately by [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;hazardous &lt;/ins&gt;materials placarding]] on both sides and both ends of the car.&amp;lt;ref name=&quot;CJW-21-112&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The specification marking is stamped into the head and stencilled on the sides of the car. It does not identify the contents, but it shows how the car was built.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The marking DOT-111A60ALW1, explained in the handbook, reads as follows: DOT is the authorising agency, 111 the class, A a separator letter and 60 the tank test pressure in psi. AL stands for the material of construction (the group is absent for steel), W for the construction, and the final 1 for fittings, materials or linings.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On most nonpressure cars the separator letter A has no meaning, but on pressure cars, cryogenic cars and some nonpressure cars the letter indicates how the car is equipped.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The specification marking is stamped into the head and stencilled on the sides of the car. It does not identify the contents, but it shows how the car was built.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The marking DOT-111A60ALW1, explained in the handbook, reads as follows: DOT is the authorising agency, 111 the class, A a separator letter and 60 the tank test pressure in psi. AL stands for the material of construction (the group is absent for steel), W for the construction, and the final 1 for fittings, materials or linings.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On most nonpressure cars the separator letter A has no meaning, but on pressure cars, cryogenic cars and some nonpressure cars the letter indicates how the car is equipped.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5495:rev-9249:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=5495&amp;oldid=prev</id>
		<title>Emma: Add SVG figures fse-rail-tank-car-v1.svg, fse-rail-tank-car-v2.svg, fse-rail-tank-car-v3.svg, fse-rail-tank-car-v4.svg (list-2 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=5495&amp;oldid=prev"/>
		<updated>2026-11-09T08:01:56Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-rail-tank-car-v1.svg, fse-rail-tank-car-v2.svg, fse-rail-tank-car-v3.svg, fse-rail-tank-car-v4.svg (list-2 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 09:01, 9 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l32&quot;&gt;Line 32:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 32:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The tank rests on a car structure of two body bolsters and either a continuous underframe or stub sills, which carries the tank on two trucks.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; A tank may be divided into up to six compartments, each of which counts as a separate tank and may carry a different commodity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Since 1970, new DOT specification cars for regulated hazardous materials have been limited to 130 m³ (34,500 gal), or a gross weight on rail of 286,000 lb (about 130,000 kg).&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Optional features include insulation, a steel jacket that also acts as a heat-radiation shield, linings, claddings and heater coils for products that must be warmed before unloading.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The tank rests on a car structure of two body bolsters and either a continuous underframe or stub sills, which carries the tank on two trucks.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; A tank may be divided into up to six compartments, each of which counts as a separate tank and may carry a different commodity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Since 1970, new DOT specification cars for regulated hazardous materials have been limited to 130 m³ (34,500 gal), or a gross weight on rail of 286,000 lb (about 130,000 kg).&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Optional features include insulation, a steel jacket that also acts as a heat-radiation shield, linings, claddings and heater coils for products that must be warmed before unloading.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-rail-tank-car-v1.svg|thumb|upright=1.5|alt=Side view of a pressure tank car with labelled tank head, shell, jacket, protective housing, body bolsters, trucks, couplers and head shield|Main parts of a rail tank car.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Types of tank cars ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Types of tank cars ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l44&quot;&gt;Line 44:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 45:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The specification marking is stamped into the head and stencilled on the sides of the car. It does not identify the contents, but it shows how the car was built.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The marking DOT-111A60ALW1, explained in the handbook, reads as follows: DOT is the authorising agency, 111 the class, A a separator letter and 60 the tank test pressure in psi. AL stands for the material of construction (the group is absent for steel), W for the construction, and the final 1 for fittings, materials or linings.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On most nonpressure cars the separator letter A has no meaning, but on pressure cars, cryogenic cars and some nonpressure cars the letter indicates how the car is equipped.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The specification marking is stamped into the head and stencilled on the sides of the car. It does not identify the contents, but it shows how the car was built.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The marking DOT-111A60ALW1, explained in the handbook, reads as follows: DOT is the authorising agency, 111 the class, A a separator letter and 60 the tank test pressure in psi. AL stands for the material of construction (the group is absent for steel), W for the construction, and the final 1 for fittings, materials or linings.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On most nonpressure cars the separator letter A has no meaning, but on pressure cars, cryogenic cars and some nonpressure cars the letter indicates how the car is equipped.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-rail-tank-car-v2.svg|thumb|upright=1.5|alt=The marking DOT-111A60ALW1 split into seven groups with leader lines to their meanings|Reading the specification marking DOT-111A60ALW1: agency, class, separator letter, tank test pressure, material, construction and fittings.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, consider the specification DOT-112J340W, which the handbook gives as an example within class DOT-112.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Class DOT-112 is a pressure tank car class, and 340 is the tank test pressure, 340 psi or about 2344 kPa. Pressure-relief valves on tank cars are typically set at 75 % of the tank test pressure.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-130.&amp;lt;/ref&amp;gt; The relief valve of such a car would therefore start to open at about 0.75 × 340 = 255 psi, or about 1760 kPa. The minimum plate thickness for a steel pressure car with a test pressure of 300 psi or more is 17.5 mm (11/16 in.). With high-tensile-strength steels it may be reduced, but never below 12.7 mm (1/2 in.).&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, consider the specification DOT-112J340W, which the handbook gives as an example within class DOT-112.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Class DOT-112 is a pressure tank car class, and 340 is the tank test pressure, 340 psi or about 2344 kPa. Pressure-relief valves on tank cars are typically set at 75 % of the tank test pressure.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-130.&amp;lt;/ref&amp;gt; The relief valve of such a car would therefore start to open at about 0.75 × 340 = 255 psi, or about 1760 kPa. The minimum plate thickness for a steel pressure car with a test pressure of 300 psi or more is 17.5 mm (11/16 in.). With high-tensile-strength steels it may be reduced, but never below 12.7 mm (1/2 in.).&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l64&quot;&gt;Line 64:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 66:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Test results show how much this protection gains. In fire tests on LP-gas railroad tank cars, a BLEVE occurred after 93 minutes in the insulated case and after 25 minutes without insulation.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In one real incident, an insulated LP-gas tank car did not fail until after 20½ hours of fire exposure, which Lemoff (2008) calls an extreme example.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; Damage from impact alone can also lead to delayed failure. A 113.5 m³ (30,000 gal) LP-gas tank car weakened in a derailment failed more than 40 hours later, while its internal pressure was rising with the ambient temperature.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Test results show how much this protection gains. In fire tests on LP-gas railroad tank cars, a BLEVE occurred after 93 minutes in the insulated case and after 25 minutes without insulation.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In one real incident, an insulated LP-gas tank car did not fail until after 20½ hours of fire exposure, which Lemoff (2008) calls an extreme example.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; Damage from impact alone can also lead to delayed failure. A 113.5 m³ (30,000 gal) LP-gas tank car weakened in a derailment failed more than 40 hours later, while its internal pressure was rising with the ambient temperature.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-rail-tank-car-v4.svg|thumb|upright=1.5|alt=Horizontal bar chart: BLEVE after 25 minutes uninsulated and 93 minutes insulated, with thermal protection target of 100 minutes in a pool fire|Time to BLEVE in fire tests on LP-gas tank cars, compared with the design target of thermal protection (tank metal below 427 °C for 100 min in a pool fire, 30 min in a torch fire).]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== BLEVE and fireball hazard ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== BLEVE and fireball hazard ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l101&quot;&gt;Line 101:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 104:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a target on the ground 76 m from the car, R = √(316² + 76²) ≈ 325 m and the heat flux is 828 × 28,600&amp;lt;sup&amp;gt;0.771&amp;lt;/sup&amp;gt; / 325² ≈ 21.4 kW/m². At 244 m the result is about 14.2 kW/m², and at 800 m about 3.1 kW/m². For a three-quarters full car, the flux at 76 m rises to about 22.6 kW/m².&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-5-16&amp;quot; /&amp;gt; Because the fireball centre lies high above the ground, the flux in this model changes little within the first hundred metres.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a target on the ground 76 m from the car, R = √(316² + 76²) ≈ 325 m and the heat flux is 828 × 28,600&amp;lt;sup&amp;gt;0.771&amp;lt;/sup&amp;gt; / 325² ≈ 21.4 kW/m². At 244 m the result is about 14.2 kW/m², and at 800 m about 3.1 kW/m². For a three-quarters full car, the flux at 76 m rises to about 22.6 kW/m².&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-5-16&amp;quot; /&amp;gt; Because the fireball centre lies high above the ground, the flux in this model changes little within the first hundred metres.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-rail-tank-car-v3.svg|thumb|upright=1.5|alt=Line chart of fireball heat flux falling from about 23 kW per square metre at the car to about 2 kW per square metre at 1000 m|Estimated fireball radiation versus ground distance for a half-full 113.5 m³ LP-gas tank car (28,600 kg propane), fireball method of NUREG-1805 (inverse-square, from fireball centre).]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency response ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency response ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3700:rev-5495:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Emma</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=3700&amp;oldid=prev</id>
		<title>Jan: NFPA wiki: fact-check corrections (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=3700&amp;oldid=prev"/>
		<updated>2026-11-07T21:34:29Z</updated>

		<summary type="html">&lt;p&gt;NFPA wiki: fact-check corrections (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 22:34, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;rail tank car&#039;&#039;&#039; (also &#039;&#039;&#039;railroad tank car&#039;&#039;&#039; or simply &#039;&#039;&#039;tank car&#039;&#039;&#039;) is a &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;railroad freight car built around &lt;/del&gt;a &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;closed tank for carrying liquids, liquefied or compressed gases and some solids in bulk&lt;/del&gt;.&amp;lt;ref name=&quot;CJW-21-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;122&lt;/del&gt;&quot;&amp;gt;C. J. Wright (2008b), pp. 21-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;122–21&lt;/del&gt;-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;123&lt;/del&gt;.&amp;lt;/ref&amp;gt; Tank cars carry both hazardous and nonhazardous commodities, and the materials a car may carry depend on its size, construction, fittings and linings.&amp;lt;ref name=&quot;CJW-21-122&quot; /&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;On US railroads&lt;/del&gt;, the majority of hazardous materials shipments &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;move &lt;/del&gt;in tank cars&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;: 85 % in 2005&lt;/del&gt;.&amp;lt;ref name=&quot;CJW-21-112&quot;&amp;gt;C. J. Wright (2008b), pp. 21-111–21-112.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;rail tank car&#039;&#039;&#039; (also &#039;&#039;&#039;railroad tank car&#039;&#039;&#039; or simply &#039;&#039;&#039;tank car&#039;&#039;&#039;) is a &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;type of bulk packaging in which the tank is an integral part of &lt;/ins&gt;a &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;rail transport vehicle&lt;/ins&gt;.&amp;lt;ref name=&quot;CJW-21-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;121&lt;/ins&gt;&quot;&amp;gt;C. J. Wright (2008b), pp. 21-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;121–21&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;122&lt;/ins&gt;.&amp;lt;/ref&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt; The handbook counts more than 250,000 tank cars, which carry compressed and liquefied gases, liquids and solids.&amp;lt;ref name=&quot;CJW-21-121&quot; /&lt;/ins&gt;&amp;gt; Tank cars carry both hazardous and nonhazardous commodities, and the materials a car may carry depend on its size, construction, fittings and linings.&amp;lt;ref name=&quot;CJW-21-122&quot;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt;C. J. Wright (2008b), pp. 21-122–21-123.&amp;lt;&lt;/ins&gt;/&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;ref&lt;/ins&gt;&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;In the 2005 rail statistics for the United States and Canada given in the handbook&lt;/ins&gt;, the majority of hazardous materials shipments&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, 85 %, moved &lt;/ins&gt;in tank cars.&amp;lt;ref name=&quot;CJW-21-112&quot;&amp;gt;C. J. Wright (2008b), pp. 21-111–21-112.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Tank cars range from about 15 m³ (4000 gal) to about 170 m³ (45,000 gal) in capacity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-124.&amp;lt;/ref&amp;gt; They are grouped into nonpressure, pressure and cryogenic classes, each identified by a specification marking on the tank.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-125.&amp;lt;/ref&amp;gt; The main fire hazard arises when a car is damaged in an accident or exposed to fire. A car of [[Liquefied petroleum gas|liquefied petroleum gas]] (LP-gas) that is heated by flames can fail in a BLEVE with a large fireball, as several US derailments have shown.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot;&amp;gt;Lemoff (2008), pp. 6-171–6-172.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot;&amp;gt;Beyler (2002a), pp. 3-302–3-303.&amp;lt;/ref&amp;gt; This article describes tank cars as presented in the 2008 &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, which reflects US and Canadian rules of that time.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Tank cars range from about 15 m³ (4000 gal) to about 170 m³ (45,000 gal) in capacity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-124.&amp;lt;/ref&amp;gt; They are grouped into nonpressure, pressure and cryogenic classes, each identified by a specification marking on the tank.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-125.&amp;lt;/ref&amp;gt; The main fire hazard arises when a car is damaged in an accident or exposed to fire. A car of [[Liquefied petroleum gas|liquefied petroleum gas]] (LP-gas) that is heated by flames can fail in a BLEVE with a large fireball, as several US derailments have shown.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot;&amp;gt;Lemoff (2008), pp. 6-171–6-172.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot;&amp;gt;Beyler (2002a), pp. 3-302–3-303.&amp;lt;/ref&amp;gt; This article describes tank cars as presented in the 2008 &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, which reflects US and Canadian rules of that time.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l22&quot;&gt;Line 22:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 22:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Steel || 17.5 mm (11/16 in.) || Pressure cars with tank test pressure of 300 psi (2068 kPa) and greater&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Steel || 17.5 mm (11/16 in.) || Pressure cars with tank test pressure of 300 psi (2068 kPa) and greater&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|-&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|-&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Steel || 19.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0 &lt;/del&gt;mm (3/4 in.) || Pressure cars in chlorine service&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Steel || 19.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;1 &lt;/ins&gt;mm (3/4 in.) || Pressure cars in chlorine service&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|-&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|-&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Aluminium || 12.7 mm (1/2 in.) || Nonpressure aluminium cars&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;| Aluminium || 12.7 mm (1/2 in.) || Nonpressure aluminium cars&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l66&quot;&gt;Line 66:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 66:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== BLEVE and fireball hazard ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== BLEVE and fireball hazard ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a [[BLEVE]], the tank fails into two or more pieces while the liquid inside is above its boiling point at atmospheric pressure.&amp;lt;ref name=&quot;IS-5-15&quot;&amp;gt;Iqbal and Salley (2004), p. 5-15.&amp;lt;/ref&amp;gt; Lemoff (2008) stresses that a BLEVE is what happens after the container fails, not how it fails. In failures caused by overheating, the tear typically starts in the metal over the vapour space, which the liquid does not cool.&amp;lt;ref name=&quot;Lemoff-6-171&quot; /&amp;gt; Most liquefied gas BLEVEs occur when containers are from slightly less than one-half to about three-fourths full.&amp;lt;ref name=&quot;Lemoff-6-172&quot; /&amp;gt; Pieces can be thrown up to about 0.8 km (½ mile), and deaths from such missiles &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;have occurred up to &lt;/del&gt;244 m (800 ft) from larger containers.&amp;lt;ref name=&quot;Lemoff-6-172&quot; /&amp;gt; Fatal burns can &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;occur &lt;/del&gt;up to 76 m (250 ft) &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;away&lt;/del&gt;.&amp;lt;ref name=&quot;Lemoff-6-172&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In a [[BLEVE]], the tank fails into two or more pieces while the liquid inside is above its boiling point at atmospheric pressure.&amp;lt;ref name=&quot;IS-5-15&quot;&amp;gt;Iqbal and Salley (2004), p. 5-15.&amp;lt;/ref&amp;gt; Lemoff (2008) stresses that a BLEVE is what happens after the container fails, not how it fails. In failures caused by overheating, the tear typically starts in the metal over the vapour space, which the liquid does not cool.&amp;lt;ref name=&quot;Lemoff-6-171&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt; &lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Most liquefied gas BLEVEs occur when containers are from slightly less than one-half to about three-fourths full.&amp;lt;ref name=&quot;Lemoff-6-172&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&quot; /&amp;gt; NUREG-1805 gives a different range, stating that most BLEVEs occur when containers are &quot;less than ½ to ⅓ full of liquid&quot;.&amp;lt;ref name=&quot;IS-5-15&lt;/ins&gt;&quot; /&amp;gt; Pieces can be thrown up to about 0.8 km (½ mile), and deaths from such missiles &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;can occur as far as &lt;/ins&gt;244 m (800 ft) from larger containers.&amp;lt;ref name=&quot;Lemoff-6-172&quot; /&amp;gt; Fatal burns can &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;be suffered &lt;/ins&gt;up to 76 m (250 ft) &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;from the larger containers&lt;/ins&gt;.&amp;lt;ref name=&quot;Lemoff-6-172&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two US derailments described in the SFPE handbook show the fireball hazard. At Oneonta, New York, a derailment involved 27 cars, 7 of which contained 120 m³ (33,000 gal) of liquid propane. Seconds later a [[Fireball|fireball]] rose from the pile of tank cars and heated other tanks, which then failed in several BLEVEs.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; At Crescent City, Illinois, 10 of 15 derailed cars carried 130 m³ (34,000 gal) of LP-gas each. One car rode over the pile and tore a hole in another, and explosions continued for hours, destroying 24 living quarters and 18 businesses.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; Beyler (2002a) puts the size of such fireballs at about 100 m in diameter and their duration at a few seconds.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two US derailments described in the SFPE handbook show the fireball hazard. At Oneonta, New York, a derailment involved 27 cars, 7 of which contained 120 m³ (33,000 gal) of liquid propane. Seconds later a [[Fireball|fireball]] rose from the pile of tank cars and heated other tanks, which then failed in several BLEVEs.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; At Crescent City, Illinois, 10 of 15 derailed cars carried 130 m³ (34,000 gal) of LP-gas each. One car rode over the pile and tore a hole in another, and explosions continued for hours, destroying 24 living quarters and 18 businesses.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; Beyler (2002a) puts the size of such fireballs at about 100 m in diameter and their duration at a few seconds.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l94&quot;&gt;Line 94:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 96:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|}&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|}&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;method is &lt;/del&gt;a point-source &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;model. &lt;/del&gt;NUREG-1805 notes that &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;such models &lt;/del&gt;overestimate the radiation close to the fire. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;They &lt;/del&gt;can be used where a conservative estimate of the hazard is generally acceptable.&amp;lt;ref name=&quot;IS-5-17&quot;&amp;gt;Iqbal and Salley (2004), p. 5-17.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;fireball equation has the inverse-square form of &lt;/ins&gt;a &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;point source, with the distance measured from the centre of the fireball.&amp;lt;ref name=&quot;IS-5-15&quot; /&amp;gt; For &lt;/ins&gt;point-source &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;radiation models, &lt;/ins&gt;NUREG-1805 notes that &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;they &lt;/ins&gt;overestimate the radiation &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;at targets &lt;/ins&gt;close to the fire. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Such models &lt;/ins&gt;can be used where a conservative estimate of the hazard is generally acceptable.&amp;lt;ref name=&quot;IS-5-17&quot;&amp;gt;Iqbal and Salley (2004), p. 5-17.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take the 113.5 m³ (30,000 gal) LP-gas tank car mentioned above, half full of commercial propane.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt; Commercial propane has a liquid density of 504 kg/m³ and gives 0.534 m³ of vapour per kg at 15.5 °C. The propane mass is then 113.5 × 0.5 × 504 ≈ 28,600 kg, and the vapour density is 1/0.534 ≈ 1.87 kg/m³.&amp;lt;ref name=&amp;quot;Lemoff-6-183&amp;quot;&amp;gt;Lemoff (2008), p. 6-183.&amp;lt;/ref&amp;gt; Taking all of the propane as fuel vapour, which is a conservative assumption, the vapour volume is about 15,300 m³ and the fireball flame height is 12.73 × 15,300&amp;lt;sup&amp;gt;1/3&amp;lt;/sup&amp;gt; ≈ 316 m.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take the 113.5 m³ (30,000 gal) LP-gas tank car mentioned above, half full of commercial propane.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt; Commercial propane has a liquid density of 504 kg/m³ and gives 0.534 m³ of vapour per kg at 15.5 °C. The propane mass is then 113.5 × 0.5 × 504 ≈ 28,600 kg, and the vapour density is 1/0.534 ≈ 1.87 kg/m³.&amp;lt;ref name=&amp;quot;Lemoff-6-183&amp;quot;&amp;gt;Lemoff (2008), p. 6-183.&amp;lt;/ref&amp;gt; Taking all of the propane as fuel vapour, which is a conservative assumption, the vapour volume is about 15,300 m³ and the fireball flame height is 12.73 × 15,300&amp;lt;sup&amp;gt;1/3&amp;lt;/sup&amp;gt; ≈ 316 m.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a target on the ground 76 m from the car, R = √(316² + 76²) ≈ 325 m and the heat flux is 828 × 28,600&amp;lt;sup&amp;gt;0.771&amp;lt;/sup&amp;gt; / 325² ≈ 21 kW/m². At 244 m the result is about 14 kW/m², and at 800 m about 3 kW/m². For a three-quarters full car, the flux at 76 m rises to about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;23 &lt;/del&gt;kW/m².&amp;lt;ref name=&quot;IS-5-15&quot; /&amp;gt;&amp;lt;ref name=&quot;IS-5-16&quot; /&amp;gt; Because the fireball centre lies high above the ground, the flux in this model changes little within the first hundred metres.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a target on the ground 76 m from the car, R = √(316² + 76²) ≈ 325 m and the heat flux is 828 × 28,600&amp;lt;sup&amp;gt;0.771&amp;lt;/sup&amp;gt; / 325² ≈ 21&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.4 &lt;/ins&gt;kW/m². At 244 m the result is about 14&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.2 &lt;/ins&gt;kW/m², and at 800 m about 3&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.1 &lt;/ins&gt;kW/m². For a three-quarters full car, the flux at 76 m rises to about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;22.6 &lt;/ins&gt;kW/m².&amp;lt;ref name=&quot;IS-5-15&quot; /&amp;gt;&amp;lt;ref name=&quot;IS-5-16&quot; /&amp;gt; Because the fireball centre lies high above the ground, the flux in this model changes little within the first hundred metres.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency response ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency response ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3205:rev-3700:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Jan</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=3205&amp;oldid=prev</id>
		<title>Jan: New FSE wiki article: Rail tank car (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Rail_tank_car&amp;diff=3205&amp;oldid=prev"/>
		<updated>2026-11-07T21:14:52Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Rail tank car (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;rail tank car&amp;#039;&amp;#039;&amp;#039; (also &amp;#039;&amp;#039;&amp;#039;railroad tank car&amp;#039;&amp;#039;&amp;#039; or simply &amp;#039;&amp;#039;&amp;#039;tank car&amp;#039;&amp;#039;&amp;#039;) is a railroad freight car built around a closed tank for carrying liquids, liquefied or compressed gases and some solids in bulk.&amp;lt;ref name=&amp;quot;CJW-21-122&amp;quot;&amp;gt;C. J. Wright (2008b), pp. 21-122–21-123.&amp;lt;/ref&amp;gt; Tank cars carry both hazardous and nonhazardous commodities, and the materials a car may carry depend on its size, construction, fittings and linings.&amp;lt;ref name=&amp;quot;CJW-21-122&amp;quot; /&amp;gt; On US railroads, the majority of hazardous materials shipments move in tank cars: 85 % in 2005.&amp;lt;ref name=&amp;quot;CJW-21-112&amp;quot;&amp;gt;C. J. Wright (2008b), pp. 21-111–21-112.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Tank cars range from about 15 m³ (4000 gal) to about 170 m³ (45,000 gal) in capacity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-124.&amp;lt;/ref&amp;gt; They are grouped into nonpressure, pressure and cryogenic classes, each identified by a specification marking on the tank.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-125.&amp;lt;/ref&amp;gt; The main fire hazard arises when a car is damaged in an accident or exposed to fire. A car of [[Liquefied petroleum gas|liquefied petroleum gas]] (LP-gas) that is heated by flames can fail in a BLEVE with a large fireball, as several US derailments have shown.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot;&amp;gt;Lemoff (2008), pp. 6-171–6-172.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot;&amp;gt;Beyler (2002a), pp. 3-302–3-303.&amp;lt;/ref&amp;gt; This article describes tank cars as presented in the 2008 &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, which reflects US and Canadian rules of that time.&lt;br /&gt;
&lt;br /&gt;
== Construction ==&lt;br /&gt;
A tank car is typically an enclosed longitudinal cylinder, with or without internal compartments, closed by rounded ends called heads.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-123.&amp;lt;/ref&amp;gt; The shell consists of two to seven rings formed from metal plates. The heads are pressed into a flanged-and-dished or an ellipsoidal shape, of which the 2 to 1 ellipsoidal head is the strongest.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt; Rings and heads are fusion-welded, although some older nonpressure cars are riveted. The finished tank is heated to 593 °C (1100 °F) for 1 hour to relieve welding stresses; representative samples are X-rayed and the tank is hydrostatically tested.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Carbon steel is used in over 90 % of tank car tanks, and aluminium makes up most of the remainder. Stainless steel, called alloy steel in the regulations, is used in a smaller number of cars, and nickel or nickel alloy in some tanks for acid or food service.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt; The regulations set minimum plate thicknesses, which the handbook summarises as follows.&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Minimum tank and jacket plate thickness after forming (US regulations as summarised in the 2008 handbook)&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;br /&gt;
! Material !! Thickness !! Typical use&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 11 gauge, about 3.2 mm (1/8 in.), also aluminium || Jacket of insulated or thermally protected cars&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 11.1 mm (7/16 in.) || Tank of nonpressure cars&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 12.7 mm (1/2 in.) || Head shield for puncture resistance&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 14.3 mm (9/16 in.) || Pressure cars with tank test pressure of 200 psi (1379 kPa) and below&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 17.5 mm (11/16 in.) || Pressure cars with tank test pressure of 300 psi (2068 kPa) and greater&lt;br /&gt;
|-&lt;br /&gt;
| Steel || 19.0 mm (3/4 in.) || Pressure cars in chlorine service&lt;br /&gt;
|-&lt;br /&gt;
| Aluminium || 12.7 mm (1/2 in.) || Nonpressure aluminium cars&lt;br /&gt;
|-&lt;br /&gt;
| Aluminium || 15.9 mm (5/8 in.) || Aluminium pressure cars&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
In the United States, tank cars must meet the mechanical standards for all freight cars and the DOT Hazardous Materials Regulations (49 CFR Part 179). They must also meet the tank car specifications of the Association of American Railroads (AAR).&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt; They also meet or exceed the ASME standards for pressure vessels. Builders need design approval from the AAR Tank Car Committee, and repairs involving welding or alterations may only be made at AAR-certified facilities.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt; In Canada, the tank car requirements are set by Transport Canada.&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The tank rests on a car structure of two body bolsters and either a continuous underframe or stub sills, which carries the tank on two trucks.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; A tank may be divided into up to six compartments, each of which counts as a separate tank and may carry a different commodity.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Since 1970, new DOT specification cars for regulated hazardous materials have been limited to 130 m³ (34,500 gal), or a gross weight on rail of 286,000 lb (about 130,000 kg).&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt; Optional features include insulation, a steel jacket that also acts as a heat-radiation shield, linings, claddings and heater coils for products that must be warmed before unloading.&amp;lt;ref name=&amp;quot;CJW-21-124&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Types of tank cars ==&lt;br /&gt;
The specification of a tank decides which products it may carry.&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-126.&amp;lt;/ref&amp;gt; The handbook distinguishes three main groups, listed with their classes in its table of tank car classes.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Nonpressure tank cars, also called general-service or acid-service cars, carry flammable and combustible liquids, flammable solids, oxidisers, organic peroxides, poisons, corrosives and molten solids, as well as products such as corn syrup.&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt; Their tank test pressures range from 60 to 100 psi (414 to 689 kPa).&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt; Their classes include DOT-103, DOT-104, DOT-111 and DOT-115.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Variants include the insulated tank-within-a-tank car for temperature-sensitive products and the Tank Train, a string of cars connected by hoses and loaded from one end.&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-127&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-127.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Pressure tank cars carry flammable, nonflammable or poisonous gases at higher pressures, and also products such as ethylene oxide, pyrophoric liquids and bromine.&amp;lt;ref name=&amp;quot;CJW-21-128&amp;quot;&amp;gt;C. J. Wright (2008b), pp. 21-128–21-129.&amp;lt;/ref&amp;gt; Their test pressures range from 100 to 600 psi (689 to 4137 kPa). They are noncompartmented and top-loading, with the fittings for loading, unloading, pressure relief and gauging inside a protective housing on a single manway.&amp;lt;ref name=&amp;quot;CJW-21-128&amp;quot; /&amp;gt; Their classes are DOT-105, DOT-109, DOT-112, DOT-114 and DOT-120.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On pressure cars without insulation or jacketed thermal protection, the top two-thirds of the tank are painted white or another reflective colour.&amp;lt;ref name=&amp;quot;CJW-21-128&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Cryogenic liquid tank cars (DOT-113 and AAR-204) carry liquids refrigerated to –104 °C (–155 °F) and below at low pressure, usually 172 kPa (25 psi) or lower.&amp;lt;ref name=&amp;quot;CJW-21-129&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-129.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Typical contents are argon, ethylene, hydrogen, nitrogen and oxygen. The inner tank of alloy steel sits inside an outer tank, and the space between them is insulated and evacuated. This combination protects the contents for only 30 days, so these shipments are time-sensitive.&amp;lt;ref name=&amp;quot;CJW-21-129&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Markings and specification ==&lt;br /&gt;
Every tank car carries reporting marks, a set of initials and a number, on both sides and both ends. An &amp;quot;X&amp;quot; as the last initial means that the car is privately owned, and most tank cars are owned by companies other than railroads.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; With the initials and number, shippers, carriers and responders can find the contents of the car from the railroad&amp;#039;s computer or the shipping papers.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The hazard class and identification number of the contents are shown separately by [[Hazardous materials placarding]] on both sides and both ends of the car.&amp;lt;ref name=&amp;quot;CJW-21-112&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The specification marking is stamped into the head and stencilled on the sides of the car. It does not identify the contents, but it shows how the car was built.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The marking DOT-111A60ALW1, explained in the handbook, reads as follows: DOT is the authorising agency, 111 the class, A a separator letter and 60 the tank test pressure in psi. AL stands for the material of construction (the group is absent for steel), W for the construction, and the final 1 for fittings, materials or linings.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; On most nonpressure cars the separator letter A has no meaning, but on pressure cars, cryogenic cars and some nonpressure cars the letter indicates how the car is equipped.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
As a worked example, consider the specification DOT-112J340W, which the handbook gives as an example within class DOT-112.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Class DOT-112 is a pressure tank car class, and 340 is the tank test pressure, 340 psi or about 2344 kPa. Pressure-relief valves on tank cars are typically set at 75 % of the tank test pressure.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-130.&amp;lt;/ref&amp;gt; The relief valve of such a car would therefore start to open at about 0.75 × 340 = 255 psi, or about 1760 kPa. The minimum plate thickness for a steel pressure car with a test pressure of 300 psi or more is 17.5 mm (11/16 in.). With high-tensile-strength steels it may be reduced, but never below 12.7 mm (1/2 in.).&amp;lt;ref name=&amp;quot;CJW-21-123&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Other markings support identification and maintenance. The volume of the tank is stencilled on both ends and the load limit on both sides, under the reporting marks.&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt; Retest dates of the tank and of any pressure-relief devices are stencilled on the tank or a dataplate. New cars carry two stainless steel identification plates that give the manufacturer, serial number, specification, materials and date of manufacture.&amp;lt;ref name=&amp;quot;CJW-21-126&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fittings and pressure relief ==&lt;br /&gt;
Fittings allow loading, unloading and safe transport, but not every car has every fitting.&amp;lt;ref name=&amp;quot;CJW-21-129&amp;quot; /&amp;gt; A manway gives access to the interior. On pressure cars, usually two liquid valves connected to an eduction pipe to the bottom of the tank are used for liquids, and one or two vapour valves remove vapour or pressurise the tank. Excess flow valves under various fittings close when the flow exceeds a set amount.&amp;lt;ref name=&amp;quot;CJW-21-129&amp;quot; /&amp;gt; Other fittings include bottom outlet valves, gauging devices, sample lines, thermometer wells and sumps. A bottom washout is opened only for cleaning, and once its closure is removed there is no way to control the flow of lading.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Each [[Pressure relief device|pressure relief device]] limits the build-up of internal pressure caused by vaporisation and expansion of the contents. Relief devices on tank cars are set at either 75 % of the tank test pressure or 33 % of the burst pressure.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot; /&amp;gt; A pressure-relief valve is held closed by springs and recloses after operating. A safety vent uses a rupture disc that does not reclose; cars fitted with such vents are stencilled &amp;quot;Not for poisonous or flammable liquids&amp;quot;.&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot; /&amp;gt; Combination devices join a rupture disc or breaking pin to a spring-loaded valve. Some nonpressure tanks also have a vacuum relief valve against negative pressures greater than 0.75 psi (about 5 kPa).&amp;lt;ref name=&amp;quot;CJW-21-130&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A relief valve cannot by itself prevent failure in a fire. Lemoff (2008) explains that a spring-loaded valve only reduces the pressure to somewhat below its start-to-discharge pressure, so the liquid stays above its normal boiling point and the shell remains stressed.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt; Where flames heat the shell above the liquid level, the metal can lose enough strength to fail even though the valve works as designed.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Safety features and fire exposure ==&lt;br /&gt;
In the late 1960s and early 1970s, a series of serious derailments occurred in the United States. Lemoff and Rivkin (2008) give the 1973 LP-gas fire at Kingman, Arizona, as an example of incidents with both impact-caused and fire-caused BLEVEs of tank cars carrying liquefied flammable gases.&amp;lt;ref name=&amp;quot;LR-7-37&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-37.&amp;lt;/ref&amp;gt; As a result, the DOT revised its regulations in 1977.&lt;br /&gt;
&lt;br /&gt;
Under the revised rules, tank cars for these gases had to be thermally protected and fitted with couplers that prevent vertical disengagement. Unless the insulation is held in a steel jacket, they also need steel head shields against punctures.&amp;lt;ref name=&amp;quot;LR-7-37&amp;quot; /&amp;gt; Existing cars had to be retrofitted by the end of 1980. In the few derailments of cars so equipped, a BLEVE either did not occur or was delayed by several hours.&amp;lt;ref name=&amp;quot;LR-7-37&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The handbook describes four of these safety features. Head shields cover the lower part or the whole of each head. Top and bottom shelf couplers have a vertical restraint that reduces the chance of couplers separating in an accident.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; Thermal protection, which is different from insulation, is designed to keep the tank metal below 427 °C (800 °F) for 100 minutes in pool fire impingement or 30 minutes in torch fire impingement.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; It is used mainly on cars for liquefied flammable gases and on some nonpressure cars, such as the DOT-111J100W4 car for ethylene oxide. Skid protection shields bottom outlets, washouts and sumps in a derailment.&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Test results show how much this protection gains. In fire tests on LP-gas railroad tank cars, a BLEVE occurred after 93 minutes in the insulated case and after 25 minutes without insulation.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In one real incident, an insulated LP-gas tank car did not fail until after 20½ hours of fire exposure, which Lemoff (2008) calls an extreme example.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; Damage from impact alone can also lead to delayed failure. A 113.5 m³ (30,000 gal) LP-gas tank car weakened in a derailment failed more than 40 hours later, while its internal pressure was rising with the ambient temperature.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== BLEVE and fireball hazard ==&lt;br /&gt;
In a [[BLEVE]], the tank fails into two or more pieces while the liquid inside is above its boiling point at atmospheric pressure.&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 5-15.&amp;lt;/ref&amp;gt; Lemoff (2008) stresses that a BLEVE is what happens after the container fails, not how it fails. In failures caused by overheating, the tear typically starts in the metal over the vapour space, which the liquid does not cool.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt; Most liquefied gas BLEVEs occur when containers are from slightly less than one-half to about three-fourths full.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; Pieces can be thrown up to about 0.8 km (½ mile), and deaths from such missiles have occurred up to 244 m (800 ft) from larger containers.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; Fatal burns can occur up to 76 m (250 ft) away.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Two US derailments described in the SFPE handbook show the fireball hazard. At Oneonta, New York, a derailment involved 27 cars, 7 of which contained 120 m³ (33,000 gal) of liquid propane. Seconds later a [[Fireball|fireball]] rose from the pile of tank cars and heated other tanks, which then failed in several BLEVEs.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; At Crescent City, Illinois, 10 of 15 derailed cars carried 130 m³ (34,000 gal) of LP-gas each. One car rode over the pile and tore a hole in another, and explosions continued for hours, destroying 24 living quarters and 18 businesses.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt; Beyler (2002a) puts the size of such fireballs at about 100 m in diameter and their duration at a few seconds.&amp;lt;ref name=&amp;quot;Beyler-3-302&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The radiation from a fireball can be estimated with the empirical method of NUREG-1805. For a target relatively distant from the fireball, the heat flux falls with the square of its distance from the centre of the fireball and rises with the mass of fuel.&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot; /&amp;gt; The centre is taken at the fireball flame height, which depends on the volume of the fuel vapour.&amp;lt;ref name=&amp;quot;IS-5-16&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 5-16.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\dot{q}&amp;#039;&amp;#039;_r = \frac{828\, m_F^{0.771}}{R^2}&amp;lt;/math&amp;gt;&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;R = \sqrt{Z_p^2 + L^2}, \qquad Z_p = 12.73\, V_F^{1/3}, \qquad V_F = \frac{m_F}{\rho_F}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Symbols in the fireball equations&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-5-16&amp;quot; /&amp;gt;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot{q}&amp;#039;&amp;#039;_r&amp;lt;/math&amp;gt; || Thermal radiation from the fireball at the target || kW/m²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;m_F&amp;lt;/math&amp;gt; || Mass of fuel vapour || kg&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;R&amp;lt;/math&amp;gt; || Distance from the centre of the fireball to the target || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;Z_p&amp;lt;/math&amp;gt; || Fireball flame height || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;L&amp;lt;/math&amp;gt; || Distance at ground level from the origin || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;V_F&amp;lt;/math&amp;gt; || Volume of fuel vapour || m³&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\rho_F&amp;lt;/math&amp;gt; || Fuel vapour density || kg/m³&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The method is a point-source model. NUREG-1805 notes that such models overestimate the radiation close to the fire. They can be used where a conservative estimate of the hazard is generally acceptable.&amp;lt;ref name=&amp;quot;IS-5-17&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 5-17.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
As a worked example, take the 113.5 m³ (30,000 gal) LP-gas tank car mentioned above, half full of commercial propane.&amp;lt;ref name=&amp;quot;Lemoff-6-171&amp;quot; /&amp;gt; Commercial propane has a liquid density of 504 kg/m³ and gives 0.534 m³ of vapour per kg at 15.5 °C. The propane mass is then 113.5 × 0.5 × 504 ≈ 28,600 kg, and the vapour density is 1/0.534 ≈ 1.87 kg/m³.&amp;lt;ref name=&amp;quot;Lemoff-6-183&amp;quot;&amp;gt;Lemoff (2008), p. 6-183.&amp;lt;/ref&amp;gt; Taking all of the propane as fuel vapour, which is a conservative assumption, the vapour volume is about 15,300 m³ and the fireball flame height is 12.73 × 15,300&amp;lt;sup&amp;gt;1/3&amp;lt;/sup&amp;gt; ≈ 316 m.&lt;br /&gt;
&lt;br /&gt;
For a target on the ground 76 m from the car, R = √(316² + 76²) ≈ 325 m and the heat flux is 828 × 28,600&amp;lt;sup&amp;gt;0.771&amp;lt;/sup&amp;gt; / 325² ≈ 21 kW/m². At 244 m the result is about 14 kW/m², and at 800 m about 3 kW/m². For a three-quarters full car, the flux at 76 m rises to about 23 kW/m².&amp;lt;ref name=&amp;quot;IS-5-15&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-5-16&amp;quot; /&amp;gt; Because the fireball centre lies high above the ground, the flux in this model changes little within the first hundred metres.&lt;br /&gt;
&lt;br /&gt;
== Emergency response ==&lt;br /&gt;
The fire hazards of tank cars are minimal unless a car is damaged in an accident.&amp;lt;ref name=&amp;quot;CJW-21-110&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-110.&amp;lt;/ref&amp;gt; If a fire occurs, the contents must be known before fire fighting starts. A car exposed to radiant heat, and especially to direct flame impingement, should be approached cautiously, because rising vapour pressure can operate the relief device or rupture the tank.&amp;lt;ref name=&amp;quot;CJW-21-110&amp;quot; /&amp;gt; Lemoff (2008) describes protection of an uninsulated liquefied gas container by applying water so that a film of water coats the parts of the shell not wetted by liquid inside.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt; These data apply only to unreactive liquefied flammable gases; with reactive gases, internal heat of reaction can make external cooling ineffective.&amp;lt;ref name=&amp;quot;Lemoff-6-172&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Identification relies on placards, identification numbers, stencilled names, reporting marks and the train consist, the shipping paper that lists the position and contents of every car.&amp;lt;ref name=&amp;quot;CJW-21-112&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-21-125&amp;quot; /&amp;gt; The handbook notes that placards may not be visible because of the orientation of the cars, and that it may not be prudent to approach close enough to read them.&amp;lt;ref name=&amp;quot;CJW-21-112&amp;quot; /&amp;gt; The shipping papers are held by the conductor, who in a hazardous materials emergency is likely to move with the crew at least half a mile (0.8 km) upwind, uphill or upstream.&amp;lt;ref name=&amp;quot;CJW-21-112&amp;quot; /&amp;gt; Responders should not work on or near the track until flaggers have been placed at least 2.4 km (1½ miles) in each direction or the railroad confirms that trains have stopped.&amp;lt;ref name=&amp;quot;CJW-21-114&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-114.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Describing the car accurately to tank car specialists who are not on the scene may be the most useful contribution a responder can make.&amp;lt;ref name=&amp;quot;CJW-21-122&amp;quot; /&amp;gt; For damaged pressure tank cars, this includes the radius of curvature of dents and the depth of scores and gouges, which C. J. Wright (2008a) lists among the damage information to collect.&amp;lt;ref name=&amp;quot;CJW8a-13-132&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-132.&amp;lt;/ref&amp;gt; Carriers and the AAR Bureau of Explosives can send response teams, some with equipment to repair leaks and to transfer the contents of damaged tank cars.&amp;lt;ref name=&amp;quot;CJW-21-113&amp;quot;&amp;gt;C. J. Wright (2008b), p. 21-113.&amp;lt;/ref&amp;gt; LP-gas and other products also travel by road in [[Cargo tank vehicle|cargo tank vehicles]]. Their tanks are basically ASME code tanks, whereas tanks for railcars are covered by specific DOT and Transport Canada specifications.&amp;lt;ref name=&amp;quot;LR-7-37&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Lemoff-6-183&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Emergency Response Guidebook]]&lt;br /&gt;
* [[U.S. Department of Transportation]]&lt;br /&gt;
* [[Chlorine]]&lt;br /&gt;
* [[Cryogenic fluid]]&lt;br /&gt;
* [[Ethylene oxide]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Beyler, C. L. (2002a). Fire hazard calculations for large, open hydrocarbon fires. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-268–3-314). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Lemoff, T. C. (2008). Gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-165–6-186). National Fire Protection Association.&lt;br /&gt;
* Lemoff, T. C., &amp;amp; Rivkin, C. H. (2008). Storage of gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-35–7-42). National Fire Protection Association.&lt;br /&gt;
* Wright, C. J. (2008a). Managing the response to hazardous material incidents. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 13-117–13-144). National Fire Protection Association.&lt;br /&gt;
* Wright, C. J. (2008b). Rail transportation systems. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 21-109–21-134). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Hazardous Materials]]&lt;/div&gt;</summary>
		<author><name>Jan</name></author>
	</entry>
</feed>