<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Polyurethane_foam</id>
	<title>Polyurethane foam - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Polyurethane_foam"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;action=history"/>
	<updated>2026-11-21T22:15:29Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4830&amp;oldid=prev</id>
		<title>Linda: Remove bibliographic source lines from image captions and descriptions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4830&amp;oldid=prev"/>
		<updated>2026-11-08T07:25:13Z</updated>

		<summary type="html">&lt;p&gt;Remove bibliographic source lines from image captions and descriptions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:25, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l14&quot;&gt;Line 14:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 14:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Drysdale illustrates the effect with everyday experience: a hand placed on a block of polyurethane foam feels warm, because the foam does not conduct heat away from the skin. He gives a thermal inertia of 950 W²·s/(m⁴·K²) for the foam and 780,000 W²·s/(m⁴·K²) for oak.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot;&amp;gt;Drysdale (2008), p. 2-8.&amp;lt;/ref&amp;gt; Polyurethane foam can therefore be ignited very easily, whereas solid polyurethane of high density is relatively difficult to ignite.&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot; /&amp;gt; NUREG-1805 draws the general conclusion that density is the most important material property for ignition: the surface of a low-density material heats more rapidly and ignites sooner.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot;&amp;gt;Iqbal and Salley (2004), pp. 6-5, 6-7.&amp;lt;/ref&amp;gt; In experiments by the US National Institute of Standards and Technology (NIST) after the Station fire, wall-mounted ether-based polyurethane foam ignited within 10 seconds when exposed to pyrotechnics like those used in the nightclub. The sparks did not have enough energy to ignite birch plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Drysdale illustrates the effect with everyday experience: a hand placed on a block of polyurethane foam feels warm, because the foam does not conduct heat away from the skin. He gives a thermal inertia of 950 W²·s/(m⁴·K²) for the foam and 780,000 W²·s/(m⁴·K²) for oak.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot;&amp;gt;Drysdale (2008), p. 2-8.&amp;lt;/ref&amp;gt; Polyurethane foam can therefore be ignited very easily, whereas solid polyurethane of high density is relatively difficult to ignite.&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot; /&amp;gt; NUREG-1805 draws the general conclusion that density is the most important material property for ignition: the surface of a low-density material heats more rapidly and ignites sooner.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot;&amp;gt;Iqbal and Salley (2004), pp. 6-5, 6-7.&amp;lt;/ref&amp;gt; In experiments by the US National Institute of Standards and Technology (NIST) after the Station fire, wall-mounted ether-based polyurethane foam ignited within 10 seconds when exposed to pyrotechnics like those used in the nightclub. The sparks did not have enough energy to ignite birch plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v1.svg|thumb|upright=1.5|alt=Log-scale bar chart of thermal inertia: polyurethane foam 950, fibre insulation board 20,000, asbestos 90,000, oak 780,000, steel 160,000,000.|Thermal inertia kρc of polyurethane foam compared with other materials, on a logarithmic scale&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Drysdale (2008), p. 2-8&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v1.svg|thumb|upright=1.5|alt=Log-scale bar chart of thermal inertia: polyurethane foam 950, fibre insulation board 20,000, asbestos 90,000, oak 780,000, steel 160,000,000.|Thermal inertia kρc of polyurethane foam compared with other materials, on a logarithmic scale.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Measured ignition properties vary widely. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039;, citing Babrauskas (2003), give a minimum heat flux for piloted ignition of below 10 to 16 kW/m² for flexible foam and below 10 kW/m² for rigid foam. For autoignition the values are 16 kW/m² for flexible foam and 22 to 26 kW/m² for rigid foam.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; Table 6.17.7 of the NFPA handbook lists 16 to 30 kW/m² for flexible and 20 to 28 kW/m² for rigid foams. It gives ignition temperatures of 729 to 852 K (456 to 579 °C) for flexible foams, whereas NUREG-1805 lists 280 °C.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-7.&amp;lt;/ref&amp;gt; Babrauskas attributes such spreads to differences in specimen size, orientation, air flow, heat flux and composition.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Measured ignition properties vary widely. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039;, citing Babrauskas (2003), give a minimum heat flux for piloted ignition of below 10 to 16 kW/m² for flexible foam and below 10 kW/m² for rigid foam. For autoignition the values are 16 kW/m² for flexible foam and 22 to 26 kW/m² for rigid foam.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; Table 6.17.7 of the NFPA handbook lists 16 to 30 kW/m² for flexible and 20 to 28 kW/m² for rigid foams. It gives ignition temperatures of 729 to 852 K (456 to 579 °C) for flexible foams, whereas NUREG-1805 lists 280 °C.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-7.&amp;lt;/ref&amp;gt; Babrauskas attributes such spreads to differences in specimen size, orientation, air flow, heat flux and composition.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l48&quot;&gt;Line 48:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 48:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper assumed value of 16 kW/m², the formula gives about 0.62 s for the foam. It gives about 212 s for plywood under the same exposure.&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot; /&amp;gt; The illustrative calculation therefore yields 0.22–0.62 s for the foam and 212 s for plywood. These are model outputs for the stated inputs, not measured ignition times or general predictions. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m².&amp;lt;ref name=&amp;quot;IS-6-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper assumed value of 16 kW/m², the formula gives about 0.62 s for the foam. It gives about 212 s for plywood under the same exposure.&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot; /&amp;gt; The illustrative calculation therefore yields 0.22–0.62 s for the foam and 212 s for plywood. These are model outputs for the stated inputs, not measured ignition times or general predictions. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m².&amp;lt;ref name=&amp;quot;IS-6-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v2.svg|thumb|upright=1.5|alt=Illustrative ignition-time curves: two assumed critical heat fluxes for foam and a curve using a published value for plywood.|Illustrative model curves for polyurethane foam with assumed critical heat fluxes of 10 and 16 kW/m², compared with plywood at 16 kW/m²&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Iqbal and Salley (2004), pp. 6-7–6-8, and Budnick et al. (2008), p. 3-159&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v2.svg|thumb|upright=1.5|alt=Illustrative ignition-time curves: two assumed critical heat fluxes for foam and a curve using a published value for plywood.|Illustrative model curves for polyurethane foam with assumed critical heat fluxes of 10 and 16 kW/m², compared with plywood at 16 kW/m².]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at these calculated times is 1.0 to 1.7 mm. A foam cushion or wall lining thicker than this depth would satisfy the thermally thick assumption for this illustration.&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot; /&amp;gt; In a separate NIST experiment, pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood; that exposure was different from the fixed heat flux assumed here.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at these calculated times is 1.0 to 1.7 mm. A foam cushion or wall lining thicker than this depth would satisfy the thermally thick assumption for this illustration.&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot; /&amp;gt; In a separate NIST experiment, pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood; that exposure was different from the fixed heat flux assumed here.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l54&quot;&gt;Line 54:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 54:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The way the foam decomposes shapes its role among [[plastics in fire]]. As a class, polyurethanes do not break down below 475 K (202 °C). A major mechanism is the breaking of the bond between polyol and isocyanate formed during polymerisation: the isocyanate vaporises and recondenses as a smoke, while the liquid polyol remains and decomposes further.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-128.&amp;lt;/ref&amp;gt; In flexible foams one decomposition path produces gaseous isocyanates that repolymerise in the gas phase and condense as a &amp;quot;yellow smoke&amp;quot;.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-114–1-115.&amp;lt;/ref&amp;gt; The NFPA handbook describes the same process as the formation of liquid polyols and gaseous isocyanates, and notes that some polyurethane foams form a char.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-32–2-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The way the foam decomposes shapes its role among [[plastics in fire]]. As a class, polyurethanes do not break down below 475 K (202 °C). A major mechanism is the breaking of the bond between polyol and isocyanate formed during polymerisation: the isocyanate vaporises and recondenses as a smoke, while the liquid polyol remains and decomposes further.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-128.&amp;lt;/ref&amp;gt; In flexible foams one decomposition path produces gaseous isocyanates that repolymerise in the gas phase and condense as a &amp;quot;yellow smoke&amp;quot;.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-114–1-115.&amp;lt;/ref&amp;gt; The NFPA handbook describes the same process as the formation of liquid polyols and gaseous isocyanates, and notes that some polyurethane foams form a char.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-32–2-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v4.svg|thumb|upright=1.5|alt=Flowchart: heated foam splits into isocyanate vapour, which condenses as yellow smoke, and liquid polyol, which forms a burning pool.|Simplified decomposition path of flexible polyurethane foam. Above about 475 K the polyol–isocyanate bond breaks into isocyanate vapour and liquid polyol&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Beyler and Hirschler (2002), pp. 1-114–1-115, 1-128&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v4.svg|thumb|upright=1.5|alt=Flowchart: heated foam splits into isocyanate vapour, which condenses as yellow smoke, and liquid polyol, which forms a burning pool.|Simplified decomposition path of flexible polyurethane foam. Above about 475 K the polyol–isocyanate bond breaks into isocyanate vapour and liquid polyol.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The liquid stage matters in real fires. In a fire in bulk storage of flexible foam blocks, the liquefied plastic can form a pool that burns like a flammable liquid with a high flash point. Fire fighters may therefore meet a pool fire similar to a Class B fire beneath burning foam.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Studies in England showed that pool burning can account for about 50 % of the peak [[heat release rate]] of an upholstered chair.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-126.&amp;lt;/ref&amp;gt; Expanded, low-density foam also generally burns with a higher heat release rate than the same polymer in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50b&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The liquid stage matters in real fires. In a fire in bulk storage of flexible foam blocks, the liquefied plastic can form a pool that burns like a flammable liquid with a high flash point. Fire fighters may therefore meet a pool fire similar to a Class B fire beneath burning foam.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Studies in England showed that pool burning can account for about 50 % of the peak [[heat release rate]] of an upholstered chair.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-126.&amp;lt;/ref&amp;gt; Expanded, low-density foam also generally burns with a higher heat release rate than the same polymer in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50b&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l76&quot;&gt;Line 76:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 76:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Babrauskas notes that a medium-sized sofa can reach 2 to 3 MW only 3 to 5 minutes after ignition, and that about 5 MW is common for large sofas. Less than 2 MW is enough to cause flashover in a room with a normal-sized door.&amp;lt;ref name=&amp;quot;BA-6-120&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-120.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; uses 2.5 MW as a guide value for an average living-room sofa.&amp;lt;ref name=&amp;quot;VR-4.5&amp;quot;&amp;gt;Van Rossum (2027), §4.5.&amp;lt;/ref&amp;gt; When polyurethane foam replaced traditional padding in the 1970s, the heat release rates of furniture rose to many times those of traditional types.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-29.&amp;lt;/ref&amp;gt; These values make the foam a main driver of the [[upholstered furniture fire]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Babrauskas notes that a medium-sized sofa can reach 2 to 3 MW only 3 to 5 minutes after ignition, and that about 5 MW is common for large sofas. Less than 2 MW is enough to cause flashover in a room with a normal-sized door.&amp;lt;ref name=&amp;quot;BA-6-120&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-120.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; uses 2.5 MW as a guide value for an average living-room sofa.&amp;lt;ref name=&amp;quot;VR-4.5&amp;quot;&amp;gt;Van Rossum (2027), §4.5.&amp;lt;/ref&amp;gt; When polyurethane foam replaced traditional padding in the 1970s, the heat release rates of furniture rose to many times those of traditional types.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-29.&amp;lt;/ref&amp;gt; These values make the foam a main driver of the [[upholstered furniture fire]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v3.svg|thumb|upright=1.5|alt=Range bars of peak heat release rate: cotton items 40 to 970 kW, polyurethane items 810 to 3,120 kW, with a line at 2,000 kW for flashover.|Peak heat release rates of cotton and polyurethane furnishings in unconfined burning, with the level of about 2 MW that can cause flashover in a room with a normal door&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on NFPA 921 (2004), as cited in Custer (2008), p. 2-50, and Babrauskas (2008b), p. 6-120&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-polyurethane-foam-v3.svg|thumb|upright=1.5|alt=Range bars of peak heat release rate: cotton items 40 to 970 kW, polyurethane items 810 to 3,120 kW, with a line at 2,000 kW for flashover.|Peak heat release rates of cotton and polyurethane furnishings in unconfined burning, with the level of about 2 MW that can cause flashover in a room with a normal door.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests relevant to [[mattress flammability]], mattresses show the same pattern. In SFPE Handbook data, a polyurethane foam mattress of 14 kg with PVC ticking reached 2,630 kW, and mattresses of 4 to 6 kg reached 760 to 1,620 kW. A neoprene mattress of 18 kg reached only 70 kW.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-21.&amp;lt;/ref&amp;gt; In another series, mattresses with a bench-scale heat release rate below 165 kW/m² gave room fires of less than 100 kW. Those above it gave fires of 1 to 2 MW, with an abrupt transition.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot; /&amp;gt; In US prisons, certain types of polyurethane foam mattresses are a significant fuel source because they support fast fire development, high heat release and heavy smoke production.&amp;lt;ref name=&amp;quot;JA-20-134&amp;quot;&amp;gt;Jaeger (2008), p. 20-134.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests relevant to [[mattress flammability]], mattresses show the same pattern. In SFPE Handbook data, a polyurethane foam mattress of 14 kg with PVC ticking reached 2,630 kW, and mattresses of 4 to 6 kg reached 760 to 1,620 kW. A neoprene mattress of 18 kg reached only 70 kW.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-21.&amp;lt;/ref&amp;gt; In another series, mattresses with a bench-scale heat release rate below 165 kW/m² gave room fires of less than 100 kW. Those above it gave fires of 1 to 2 MW, with an abrupt transition.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot; /&amp;gt; In US prisons, certain types of polyurethane foam mattresses are a significant fuel source because they support fast fire development, high heat release and heavy smoke production.&amp;lt;ref name=&amp;quot;JA-20-134&amp;quot;&amp;gt;Jaeger (2008), p. 20-134.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4416:rev-4830:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4416&amp;oldid=prev</id>
		<title>Lisa: Add 4 watermarked NFPA SVG illustrations</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4416&amp;oldid=prev"/>
		<updated>2026-11-08T06:43:52Z</updated>

		<summary type="html">&lt;p&gt;Add 4 watermarked NFPA SVG illustrations&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 07:43, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l14&quot;&gt;Line 14:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 14:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Drysdale illustrates the effect with everyday experience: a hand placed on a block of polyurethane foam feels warm, because the foam does not conduct heat away from the skin. He gives a thermal inertia of 950 W²·s/(m⁴·K²) for the foam and 780,000 W²·s/(m⁴·K²) for oak.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot;&amp;gt;Drysdale (2008), p. 2-8.&amp;lt;/ref&amp;gt; Polyurethane foam can therefore be ignited very easily, whereas solid polyurethane of high density is relatively difficult to ignite.&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot; /&amp;gt; NUREG-1805 draws the general conclusion that density is the most important material property for ignition: the surface of a low-density material heats more rapidly and ignites sooner.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot;&amp;gt;Iqbal and Salley (2004), pp. 6-5, 6-7.&amp;lt;/ref&amp;gt; In experiments by the US National Institute of Standards and Technology (NIST) after the Station fire, wall-mounted ether-based polyurethane foam ignited within 10 seconds when exposed to pyrotechnics like those used in the nightclub. The sparks did not have enough energy to ignite birch plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Drysdale illustrates the effect with everyday experience: a hand placed on a block of polyurethane foam feels warm, because the foam does not conduct heat away from the skin. He gives a thermal inertia of 950 W²·s/(m⁴·K²) for the foam and 780,000 W²·s/(m⁴·K²) for oak.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot;&amp;gt;Drysdale (2008), p. 2-8.&amp;lt;/ref&amp;gt; Polyurethane foam can therefore be ignited very easily, whereas solid polyurethane of high density is relatively difficult to ignite.&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot; /&amp;gt; NUREG-1805 draws the general conclusion that density is the most important material property for ignition: the surface of a low-density material heats more rapidly and ignites sooner.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot;&amp;gt;Iqbal and Salley (2004), pp. 6-5, 6-7.&amp;lt;/ref&amp;gt; In experiments by the US National Institute of Standards and Technology (NIST) after the Station fire, wall-mounted ether-based polyurethane foam ignited within 10 seconds when exposed to pyrotechnics like those used in the nightclub. The sparks did not have enough energy to ignite birch plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-polyurethane-foam-v1.svg|thumb|upright=1.5|alt=Log-scale bar chart of thermal inertia: polyurethane foam 950, fibre insulation board 20,000, asbestos 90,000, oak 780,000, steel 160,000,000.|Thermal inertia kρc of polyurethane foam compared with other materials, on a logarithmic scale. Based on Drysdale (2008), p. 2-8.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Measured ignition properties vary widely. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039;, citing Babrauskas (2003), give a minimum heat flux for piloted ignition of below 10 to 16 kW/m² for flexible foam and below 10 kW/m² for rigid foam. For autoignition the values are 16 kW/m² for flexible foam and 22 to 26 kW/m² for rigid foam.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; Table 6.17.7 of the NFPA handbook lists 16 to 30 kW/m² for flexible and 20 to 28 kW/m² for rigid foams. It gives ignition temperatures of 729 to 852 K (456 to 579 °C) for flexible foams, whereas NUREG-1805 lists 280 °C.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-7.&amp;lt;/ref&amp;gt; Babrauskas attributes such spreads to differences in specimen size, orientation, air flow, heat flux and composition.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Measured ignition properties vary widely. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039;, citing Babrauskas (2003), give a minimum heat flux for piloted ignition of below 10 to 16 kW/m² for flexible foam and below 10 kW/m² for rigid foam. For autoignition the values are 16 kW/m² for flexible foam and 22 to 26 kW/m² for rigid foam.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; Table 6.17.7 of the NFPA handbook lists 16 to 30 kW/m² for flexible and 20 to 28 kW/m² for rigid foams. It gives ignition temperatures of 729 to 852 K (456 to 579 °C) for flexible foams, whereas NUREG-1805 lists 280 °C.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-7.&amp;lt;/ref&amp;gt; Babrauskas attributes such spreads to differences in specimen size, orientation, air flow, heat flux and composition.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l47&quot;&gt;Line 47:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 48:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper assumed value of 16 kW/m², the formula gives about 0.62 s for the foam. It gives about 212 s for plywood under the same exposure.&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot; /&amp;gt; The illustrative calculation therefore yields 0.22–0.62 s for the foam and 212 s for plywood. These are model outputs for the stated inputs, not measured ignition times or general predictions. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m².&amp;lt;ref name=&amp;quot;IS-6-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper assumed value of 16 kW/m², the formula gives about 0.62 s for the foam. It gives about 212 s for plywood under the same exposure.&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot; /&amp;gt; The illustrative calculation therefore yields 0.22–0.62 s for the foam and 212 s for plywood. These are model outputs for the stated inputs, not measured ignition times or general predictions. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m².&amp;lt;ref name=&amp;quot;IS-6-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-polyurethane-foam-v2.svg|thumb|upright=1.5|alt=Illustrative ignition-time curves: two assumed critical heat fluxes for foam and a curve using a published value for plywood.|Illustrative model curves for polyurethane foam with assumed critical heat fluxes of 10 and 16 kW/m², compared with plywood at 16 kW/m². Based on Iqbal and Salley (2004), pp. 6-7–6-8, and Budnick et al. (2008), p. 3-159.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at these calculated times is 1.0 to 1.7 mm. A foam cushion or wall lining thicker than this depth would satisfy the thermally thick assumption for this illustration.&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot; /&amp;gt; In a separate NIST experiment, pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood; that exposure was different from the fixed heat flux assumed here.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at these calculated times is 1.0 to 1.7 mm. A foam cushion or wall lining thicker than this depth would satisfy the thermally thick assumption for this illustration.&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot; /&amp;gt; In a separate NIST experiment, pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood; that exposure was different from the fixed heat flux assumed here.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l52&quot;&gt;Line 52:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 54:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The way the foam decomposes shapes its role among [[plastics in fire]]. As a class, polyurethanes do not break down below 475 K (202 °C). A major mechanism is the breaking of the bond between polyol and isocyanate formed during polymerisation: the isocyanate vaporises and recondenses as a smoke, while the liquid polyol remains and decomposes further.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-128.&amp;lt;/ref&amp;gt; In flexible foams one decomposition path produces gaseous isocyanates that repolymerise in the gas phase and condense as a &amp;quot;yellow smoke&amp;quot;.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-114–1-115.&amp;lt;/ref&amp;gt; The NFPA handbook describes the same process as the formation of liquid polyols and gaseous isocyanates, and notes that some polyurethane foams form a char.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-32–2-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The way the foam decomposes shapes its role among [[plastics in fire]]. As a class, polyurethanes do not break down below 475 K (202 °C). A major mechanism is the breaking of the bond between polyol and isocyanate formed during polymerisation: the isocyanate vaporises and recondenses as a smoke, while the liquid polyol remains and decomposes further.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-128.&amp;lt;/ref&amp;gt; In flexible foams one decomposition path produces gaseous isocyanates that repolymerise in the gas phase and condense as a &amp;quot;yellow smoke&amp;quot;.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-114–1-115.&amp;lt;/ref&amp;gt; The NFPA handbook describes the same process as the formation of liquid polyols and gaseous isocyanates, and notes that some polyurethane foams form a char.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-32–2-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-polyurethane-foam-v4.svg|thumb|upright=1.5|alt=Flowchart: heated foam splits into isocyanate vapour, which condenses as yellow smoke, and liquid polyol, which forms a burning pool.|Simplified decomposition path of flexible polyurethane foam. Above about 475 K the polyol–isocyanate bond breaks into isocyanate vapour and liquid polyol. Based on Beyler and Hirschler (2002), pp. 1-114–1-115, 1-128.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The liquid stage matters in real fires. In a fire in bulk storage of flexible foam blocks, the liquefied plastic can form a pool that burns like a flammable liquid with a high flash point. Fire fighters may therefore meet a pool fire similar to a Class B fire beneath burning foam.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Studies in England showed that pool burning can account for about 50 % of the peak [[heat release rate]] of an upholstered chair.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-126.&amp;lt;/ref&amp;gt; Expanded, low-density foam also generally burns with a higher heat release rate than the same polymer in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50b&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The liquid stage matters in real fires. In a fire in bulk storage of flexible foam blocks, the liquefied plastic can form a pool that burns like a flammable liquid with a high flash point. Fire fighters may therefore meet a pool fire similar to a Class B fire beneath burning foam.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Studies in England showed that pool burning can account for about 50 % of the peak [[heat release rate]] of an upholstered chair.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-126.&amp;lt;/ref&amp;gt; Expanded, low-density foam also generally burns with a higher heat release rate than the same polymer in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50b&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l73&quot;&gt;Line 73:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 76:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Babrauskas notes that a medium-sized sofa can reach 2 to 3 MW only 3 to 5 minutes after ignition, and that about 5 MW is common for large sofas. Less than 2 MW is enough to cause flashover in a room with a normal-sized door.&amp;lt;ref name=&amp;quot;BA-6-120&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-120.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; uses 2.5 MW as a guide value for an average living-room sofa.&amp;lt;ref name=&amp;quot;VR-4.5&amp;quot;&amp;gt;Van Rossum (2027), §4.5.&amp;lt;/ref&amp;gt; When polyurethane foam replaced traditional padding in the 1970s, the heat release rates of furniture rose to many times those of traditional types.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-29.&amp;lt;/ref&amp;gt; These values make the foam a main driver of the [[upholstered furniture fire]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Babrauskas notes that a medium-sized sofa can reach 2 to 3 MW only 3 to 5 minutes after ignition, and that about 5 MW is common for large sofas. Less than 2 MW is enough to cause flashover in a room with a normal-sized door.&amp;lt;ref name=&amp;quot;BA-6-120&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-120.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; uses 2.5 MW as a guide value for an average living-room sofa.&amp;lt;ref name=&amp;quot;VR-4.5&amp;quot;&amp;gt;Van Rossum (2027), §4.5.&amp;lt;/ref&amp;gt; When polyurethane foam replaced traditional padding in the 1970s, the heat release rates of furniture rose to many times those of traditional types.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-29.&amp;lt;/ref&amp;gt; These values make the foam a main driver of the [[upholstered furniture fire]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-polyurethane-foam-v3.svg|thumb|upright=1.5|alt=Range bars of peak heat release rate: cotton items 40 to 970 kW, polyurethane items 810 to 3,120 kW, with a line at 2,000 kW for flashover.|Peak heat release rates of cotton and polyurethane furnishings in unconfined burning, with the level of about 2 MW that can cause flashover in a room with a normal door. Based on NFPA 921 (2004), as cited in Custer (2008), p. 2-50, and Babrauskas (2008b), p. 6-120.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests relevant to [[mattress flammability]], mattresses show the same pattern. In SFPE Handbook data, a polyurethane foam mattress of 14 kg with PVC ticking reached 2,630 kW, and mattresses of 4 to 6 kg reached 760 to 1,620 kW. A neoprene mattress of 18 kg reached only 70 kW.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-21.&amp;lt;/ref&amp;gt; In another series, mattresses with a bench-scale heat release rate below 165 kW/m² gave room fires of less than 100 kW. Those above it gave fires of 1 to 2 MW, with an abrupt transition.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot; /&amp;gt; In US prisons, certain types of polyurethane foam mattresses are a significant fuel source because they support fast fire development, high heat release and heavy smoke production.&amp;lt;ref name=&amp;quot;JA-20-134&amp;quot;&amp;gt;Jaeger (2008), p. 20-134.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In tests relevant to [[mattress flammability]], mattresses show the same pattern. In SFPE Handbook data, a polyurethane foam mattress of 14 kg with PVC ticking reached 2,630 kW, and mattresses of 4 to 6 kg reached 760 to 1,620 kW. A neoprene mattress of 18 kg reached only 70 kW.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-21.&amp;lt;/ref&amp;gt; In another series, mattresses with a bench-scale heat release rate below 165 kW/m² gave room fires of less than 100 kW. Those above it gave fires of 1 to 2 MW, with an abrupt transition.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot; /&amp;gt; In US prisons, certain types of polyurethane foam mattresses are a significant fuel source because they support fast fire development, high heat release and heavy smoke production.&amp;lt;ref name=&amp;quot;JA-20-134&amp;quot;&amp;gt;Jaeger (2008), p. 20-134.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4131:rev-4416:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Lisa</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4131&amp;oldid=prev</id>
		<title>Peter: FSE wiki: Fact-check: distinguish illustrative critical-flux assumptions from measured minimum ignition flux and correct gypsum thickness (written by GPT-6)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=4131&amp;oldid=prev"/>
		<updated>2026-11-07T22:17:03Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Fact-check: distinguish illustrative critical-flux assumptions from measured minimum ignition flux and correct gypsum thickness (written by GPT-6)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 23:17, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l40&quot;&gt;Line 40:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 40:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The relation assumes a thermally thick material, through which the heat wave has not yet reached the rear face. A slab behaves in this way until the heated depth, approximately &amp;lt;math&amp;gt;2\sqrt{\alpha t}&amp;lt;/math&amp;gt; with &amp;#039;&amp;#039;α&amp;#039;&amp;#039; the thermal diffusivity, approaches its thickness.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot; /&amp;gt; The critical heat flux and the ignition temperature are not unique material constants. Each correlation derives them in its own way from test data, and NUREG-1805 warns that the critical heat flux should not be confused with the minimum heat flux for ignition.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The relation assumes a thermally thick material, through which the heat wave has not yet reached the rear face. A slab behaves in this way until the heated depth, approximately &amp;lt;math&amp;gt;2\sqrt{\alpha t}&amp;lt;/math&amp;gt; with &amp;#039;&amp;#039;α&amp;#039;&amp;#039; the thermal diffusivity, approaches its thickness.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot; /&amp;gt; The critical heat flux and the ignition temperature are not unique material constants. Each correlation derives them in its own way from test data, and NUREG-1805 warns that the critical heat flux should not be confused with the minimum heat flux for ignition.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, NUREG-1805 lists for polyurethane foam an ignition temperature of 280 °C and a thermal inertia of 0.00095 (kW/(m²·K))²·s. For 12.3 mm plywood it gives 390 °C and 0.16 (kW/(m²·K))²·s.&amp;lt;ref name=&quot;IS-6-7&quot; /&amp;gt; The NFPA handbook gives a critical heat flux of 16 kW/m² for plywood.&amp;lt;ref name=&quot;BU-3-159&quot;&amp;gt;Quintiere (1998), as cited in Budnick et al. (2008), p. 3-159.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;For &lt;/del&gt;the foam &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;no single value &lt;/del&gt;is available, &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;so the range of &lt;/del&gt;10 &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;to &lt;/del&gt;16 kW/m² from the minimum &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;fluxes &lt;/del&gt;quoted above &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;is used&lt;/del&gt;.&amp;lt;ref name=&quot;IFEG-3.3-4&quot; /&amp;gt; With an exposure of 25 kW/m², an ambient temperature of 20 °C and the lower value for the foam, the &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;foam needs&lt;/del&gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, NUREG-1805 lists for polyurethane foam an ignition temperature of 280 °C and a thermal inertia of 0.00095 (kW/(m²·K))²·s. For 12.3 mm plywood it gives 390 °C and 0.16 (kW/(m²·K))²·s.&amp;lt;ref name=&quot;IS-6-7&quot; /&amp;gt; The NFPA handbook gives a critical heat flux of 16 kW/m² for plywood.&amp;lt;ref name=&quot;BU-3-159&quot;&amp;gt;Quintiere (1998), as cited in Budnick et al. (2008), p. 3-159.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt; &lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;No measured critical heat flux for &lt;/ins&gt;the foam is available &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;in these sources. To show the formula&#039;s sensitivity&lt;/ins&gt;, &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;assume &lt;/ins&gt;10 &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and &lt;/ins&gt;16 kW/m² &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;as illustrative values, taken &lt;/ins&gt;from the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;separate &lt;/ins&gt;minimum&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;-flux data &lt;/ins&gt;quoted above.&amp;lt;ref name=&quot;IFEG-3.3-4&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&quot; /&amp;gt; These data are not measured critical heat fluxes for this correlation.&amp;lt;ref name=&quot;IS-6-5&lt;/ins&gt;&quot; /&amp;gt; With an exposure of 25 kW/m², an ambient temperature of 20 °C and the lower &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;assumed &lt;/ins&gt;value for the foam, the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;formula gives&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;t_{ig} = \frac{\pi}{4} \times 0.00095 \times \frac{(280-20)^2}{(25-10)^2} \approx 0.22\ \mathrm{s}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;t_{ig} = \frac{\pi}{4} \times 0.00095 \times \frac{(280-20)^2}{(25-10)^2} \approx 0.22\ \mathrm{s}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper value of 16 kW/m², the &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;foam needs &lt;/del&gt;about 0.62 s. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The plywood needs &lt;/del&gt;about 212 s under the same exposure.&amp;lt;ref name=&quot;IS-6-8&quot; /&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Rounded down to the safe side, the foam surface ignites within &lt;/del&gt;0.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2 to 0&lt;/del&gt;.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6 &lt;/del&gt;s and the &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;plywood after about 210 s&lt;/del&gt;, &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;several hundred &lt;/del&gt;times &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;later&lt;/del&gt;. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m²&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, the same order as the calculated value for plywood&lt;/del&gt;.&amp;lt;ref name=&quot;IS-6-4&quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With the upper &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;assumed &lt;/ins&gt;value of 16 kW/m², the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;formula gives &lt;/ins&gt;about 0.62 s &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for the foam&lt;/ins&gt;. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;It gives &lt;/ins&gt;about 212 s &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for plywood &lt;/ins&gt;under the same exposure.&amp;lt;ref name=&quot;IS-6-8&quot; /&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The illustrative calculation therefore yields &lt;/ins&gt;0.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;22–0&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;62 &lt;/ins&gt;s &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for the foam &lt;/ins&gt;and &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;212 s for plywood. These are model outputs for &lt;/ins&gt;the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;stated inputs&lt;/ins&gt;, &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;not measured ignition &lt;/ins&gt;times &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;or general predictions&lt;/ins&gt;. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m².&amp;lt;ref name=&quot;IS-6-4&quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;the moment of ignition &lt;/del&gt;is &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;only &lt;/del&gt;1.0 to 1.7 mm. A foam cushion or wall lining &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;therefore behaves as &lt;/del&gt;thermally thick.&amp;lt;ref name=&quot;VR-5.5&quot; /&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The result is consistent with the &lt;/del&gt;NIST &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;observation that &lt;/del&gt;pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood.&amp;lt;ref name=&quot;MS-2-34&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth at &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;these calculated times &lt;/ins&gt;is 1.0 to 1.7 mm. A foam cushion or wall lining &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;thicker than this depth would satisfy the &lt;/ins&gt;thermally thick &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;assumption for this illustration&lt;/ins&gt;.&amp;lt;ref name=&quot;VR-5.5&quot; /&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;In a separate &lt;/ins&gt;NIST &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;experiment, &lt;/ins&gt;pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;; that exposure was different from the fixed heat flux assumed here&lt;/ins&gt;.&amp;lt;ref name=&quot;MS-2-34&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l97&quot;&gt;Line 97:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 99:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Rigid and sprayed foams used as [[foam plastic insulation]] raise similar problems. Untreated rigid polyurethane burns rapidly and is readily ignited, while fire-retardant grades resist small, short ignition sources and often stop burning when the flame is removed. In a 1969 review of fires, a high rate of flame spread appeared to be especially typical of sprayed-on polyurethane and rigid polyurethane boards, and tunnel flame spread ratings ranged from 5 to 1,375.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Rigid and sprayed foams used as [[foam plastic insulation]] raise similar problems. Untreated rigid polyurethane burns rapidly and is readily ignited, while fire-retardant grades resist small, short ignition sources and often stop burning when the flame is removed. In a 1969 review of fires, a high rate of flame spread appeared to be especially typical of sprayed-on polyurethane and rigid polyurethane boards, and tunnel flame spread ratings ranged from 5 to 1,375.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the United States, model building codes as described in the 2008 handbook require foamed plastic wall insulation to be covered by a thermal barrier such as 12.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;5 &lt;/del&gt;mm (½ in.) gypsum board.&amp;lt;ref name=&quot;BC-6-229&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; NFPA 101 and NFPA 5000, as described by Hirschler (2008b), do not allow foam plastics as interior finish unless fire tests support their use.&amp;lt;ref name=&quot;HI-18-36&quot;&amp;gt;Hirschler (2008b), p. 18-36.&amp;lt;/ref&amp;gt; In New Zealand, the 2013 commentary to the first edition of C/VM2 treats exposed polyurethane foams as typical Group Number 4 linings. Such linings lead to flashover within 2 minutes and are not acceptable in occupied spaces.&amp;lt;ref name=&quot;MBIE-21&quot;&amp;gt;Ministry of Business, Innovation and Employment (2013), p. 21.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the United States, model building codes as described in the 2008 handbook require foamed plastic wall insulation to be covered by a thermal barrier such as 12.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;7 &lt;/ins&gt;mm (½ in.) gypsum board.&amp;lt;ref name=&quot;BC-6-229&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; NFPA 101 and NFPA 5000, as described by Hirschler (2008b), do not allow foam plastics as interior finish unless fire tests support their use.&amp;lt;ref name=&quot;HI-18-36&quot;&amp;gt;Hirschler (2008b), p. 18-36.&amp;lt;/ref&amp;gt; In New Zealand, the 2013 commentary to the first edition of C/VM2 treats exposed polyurethane foams as typical Group Number 4 linings. Such linings lead to flashover within 2 minutes and are not acceptable in occupied spaces.&amp;lt;ref name=&quot;MBIE-21&quot;&amp;gt;Ministry of Business, Innovation and Employment (2013), p. 21.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Industrial uses carry their own risks. In 1975, at the Browns Ferry nuclear power plant in the United States, electricians checking a cable penetration seal of polyurethane with a candle flame ignited the sealant. The fire spread to the grouped cables, reached temperatures up to 816 °C and damaged more than 1,600 cables.&amp;lt;ref name=&amp;quot;IS-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;SH-9-187&amp;quot;&amp;gt;Sheridan (2008), p. 9-187.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Industrial uses carry their own risks. In 1975, at the Browns Ferry nuclear power plant in the United States, electricians checking a cable penetration seal of polyurethane with a candle flame ignited the sealant. The fire spread to the grouped cables, reached temperatures up to 816 °C and damaged more than 1,600 cables.&amp;lt;ref name=&amp;quot;IS-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;SH-9-187&amp;quot;&amp;gt;Sheridan (2008), p. 9-187.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3287:rev-4131:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=3287&amp;oldid=prev</id>
		<title>Peter: FSE wiki: Worked example: use the handbook critical heat flux of plywood (16 kW/m2, Budnick et al. 2008) and a 10-16 kW/m2 range for the foam (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=3287&amp;oldid=prev"/>
		<updated>2026-11-07T21:18:18Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Worked example: use the handbook critical heat flux of plywood (16 kW/m2, Budnick et al. 2008) and a 10-16 kW/m2 range for the foam (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 22:18, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l40&quot;&gt;Line 40:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 40:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The relation assumes a thermally thick material, through which the heat wave has not yet reached the rear face. A slab behaves in this way until the heated depth, approximately &amp;lt;math&amp;gt;2\sqrt{\alpha t}&amp;lt;/math&amp;gt; with &amp;#039;&amp;#039;α&amp;#039;&amp;#039; the thermal diffusivity, approaches its thickness.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot; /&amp;gt; The critical heat flux and the ignition temperature are not unique material constants. Each correlation derives them in its own way from test data, and NUREG-1805 warns that the critical heat flux should not be confused with the minimum heat flux for ignition.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The relation assumes a thermally thick material, through which the heat wave has not yet reached the rear face. A slab behaves in this way until the heated depth, approximately &amp;lt;math&amp;gt;2\sqrt{\alpha t}&amp;lt;/math&amp;gt; with &amp;#039;&amp;#039;α&amp;#039;&amp;#039; the thermal diffusivity, approaches its thickness.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot; /&amp;gt; The critical heat flux and the ignition temperature are not unique material constants. Each correlation derives them in its own way from test data, and NUREG-1805 warns that the critical heat flux should not be confused with the minimum heat flux for ignition.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, NUREG-1805 lists for polyurethane foam an ignition temperature of 280 °C and a thermal inertia of 0.00095 (kW/(m²·K))²·s. For 12.3 mm plywood it gives 390 °C and 0.16 (kW/(m²·K))²·s.&amp;lt;ref name=&quot;IS-6-7&quot; /&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;NUREG-1805 lists &lt;/del&gt;a critical heat flux of &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;10 &lt;/del&gt;kW/m² for &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;red oak and Douglas fir. The same value is assumed here for the &lt;/del&gt;plywood &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and for the foam, for which it lies at the lower end of the range quoted above&lt;/del&gt;.&amp;lt;ref name=&quot;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;IS&lt;/del&gt;-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/del&gt;-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/del&gt;&quot;&amp;gt;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Iqbal and Salley &lt;/del&gt;(&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2004&lt;/del&gt;), p. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/del&gt;-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/del&gt;.&amp;lt;/ref&amp;gt; With an exposure of &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;20 &lt;/del&gt;kW/m² &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and &lt;/del&gt;an ambient temperature of 20 °C, the foam needs&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, NUREG-1805 lists for polyurethane foam an ignition temperature of 280 °C and a thermal inertia of 0.00095 (kW/(m²·K))²·s. For 12.3 mm plywood it gives 390 °C and 0.16 (kW/(m²·K))²·s.&amp;lt;ref name=&quot;IS-6-7&quot; /&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The NFPA handbook gives &lt;/ins&gt;a critical heat flux of &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;16 &lt;/ins&gt;kW/m² for plywood.&amp;lt;ref name=&quot;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;BU&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;3&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;159&lt;/ins&gt;&quot;&amp;gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Quintiere (1998), as cited in Budnick et al. &lt;/ins&gt;(&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2008&lt;/ins&gt;), p. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;3&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;159&lt;/ins&gt;.&amp;lt;/ref&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt; For the foam no single value is available, so the range of 10 to 16 kW/m² from the minimum fluxes quoted above is used.&amp;lt;ref name=&quot;IFEG-3.3-4&quot; /&lt;/ins&gt;&amp;gt; With an exposure of &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;25 &lt;/ins&gt;kW/m²&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, &lt;/ins&gt;an ambient temperature of 20 °C &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;and the lower value for the foam&lt;/ins&gt;, the foam needs&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&quot;block&quot;&amp;gt;t_{ig} = \frac{\pi}{4} \times 0.00095 \times \frac{(280-20)^2}{(&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;20&lt;/del&gt;-10)^2} \approx 0.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;50&lt;/del&gt;\ \mathrm{s}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&quot;block&quot;&amp;gt;t_{ig} = \frac{\pi}{4} \times 0.00095 \times \frac{(280-20)^2}{(&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;25&lt;/ins&gt;-10)^2} \approx 0.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;22&lt;/ins&gt;\ \mathrm{s}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;while &lt;/del&gt;the &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;plywood needs about 172 s under the same conditions. If the critical heat flux &lt;/del&gt;of &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;the foam is taken as &lt;/del&gt;16 kW/m² &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;instead&lt;/del&gt;, the foam &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;still ignites after only &lt;/del&gt;about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;3&lt;/del&gt;.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;1 &lt;/del&gt;s.&amp;lt;ref name=&quot;IS-6-8&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&quot; /&amp;gt;&amp;lt;ref name=&quot;IFEG-3.3-4&lt;/del&gt;&quot; /&amp;gt; Rounded down to the safe side, the foam surface ignites within 0.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;5 &lt;/del&gt;to &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;3 &lt;/del&gt;s and the plywood after about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;170 &lt;/del&gt;s, &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;a factor of &lt;/del&gt;several hundred.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;With &lt;/ins&gt;the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;upper value &lt;/ins&gt;of 16 kW/m², the foam &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;needs &lt;/ins&gt;about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;62 &lt;/ins&gt;s&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. The plywood needs about 212 s under the same exposure&lt;/ins&gt;.&amp;lt;ref name=&quot;IS-6-8&quot; /&amp;gt; Rounded down to the safe side, the foam surface ignites within 0.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2 &lt;/ins&gt;to &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0.6 &lt;/ins&gt;s and the plywood after about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;210 &lt;/ins&gt;s, several hundred &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;times later. For comparison, NUREG-1805 reports measured ignition times of 150 s for hardboard at 30 kW/m² and 250 s for wood particle board at 20 kW/m², the same order as the calculated value for plywood&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;ref name=&quot;IS-6-4&quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt;&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth is only 1.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6 &lt;/del&gt;to &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;3&lt;/del&gt;.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;9 &lt;/del&gt;mm. A foam cushion or wall lining therefore behaves as thermally thick.&amp;lt;ref name=&quot;VR-5.5&quot; /&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt; For comparison, NUREG-1805 reports a measured ignition time of 250 s for wood particle board at 20 kW/m², the same order as the calculated value for plywood.&amp;lt;ref name=&quot;IS-6-4&quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&lt;/del&gt;&amp;gt; The result is consistent with the NIST observation that pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood.&amp;lt;ref name=&quot;MS-2-34&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;at the moment of ignition &lt;/ins&gt;is only 1.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0 &lt;/ins&gt;to &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;1&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;7 &lt;/ins&gt;mm. A foam cushion or wall lining therefore behaves as thermally thick.&amp;lt;ref name=&quot;VR-5.5&quot; /&amp;gt; The result is consistent with the NIST observation that pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood.&amp;lt;ref name=&quot;MS-2-34&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Burning behaviour and heat release ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l117&quot;&gt;Line 117:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 117:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Beyler, C. L., &amp;amp; Hirschler, M. M. (2002). Thermal decomposition of polymers. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-110–1-131). National Fire Protection Association; Society of Fire Protection Engineers.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Beyler, C. L., &amp;amp; Hirschler, M. M. (2002). Thermal decomposition of polymers. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-110–1-131). National Fire Protection Association; Society of Fire Protection Engineers.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;* Budnick, E. K., Hunt, S. P., &amp;amp; Wright, M. T. (2008). Closed form enclosure fire calculations. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &#039;&#039;Fire protection handbook&#039;&#039; (20th ed., pp. 3-145–3-166). National Fire Protection Association.&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Custer, R. L. P. (2008). Dynamics of compartment fire growth. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-49–2-58). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Custer, R. L. P. (2008). Dynamics of compartment fire growth. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-49–2-58). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Drysdale, D. (2008). Physics and chemistry of fire. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-3–2-20). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Drysdale, D. (2008). Physics and chemistry of fire. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-3–2-20). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3217:rev-3287:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=3217&amp;oldid=prev</id>
		<title>Peter: New FSE wiki article: Polyurethane foam (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Polyurethane_foam&amp;diff=3217&amp;oldid=prev"/>
		<updated>2026-11-07T21:15:21Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Polyurethane foam (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Polyurethane foam&amp;#039;&amp;#039;&amp;#039; is a cellular plastic made from polyurethane, a polymer formed by the reaction of isocyanates with materials such as polyols, and is produced as flexible, semi-flexible and rigid foam.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-222.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BH-1-111&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-111–1-112.&amp;lt;/ref&amp;gt; Flexible foam is by far the dominant padding in upholstered furniture and is widely used in mattresses, while rigid foam is used as thermal insulation in buildings.&amp;lt;ref name=&amp;quot;BA-6-109&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-109.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-124&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In fire safety the material is known for its very low thermal inertia.&lt;br /&gt;
&lt;br /&gt;
A typical foam has a density of about 20 kg/m³ and a thermal conductivity of 0.034 W/(m·K), so its surface heats up quickly and it ignites easily.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-34–2-35.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot;&amp;gt;Drysdale (2008), p. 2-17.&amp;lt;/ref&amp;gt; Once it burns, flexible foam can melt into a burning pool and produce dense smoke, and as a nitrogen-containing polymer it can release hydrogen cyanide as well as carbon monoxide.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-225.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;GB-6-13&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-13.&amp;lt;/ref&amp;gt; A polyurethane sofa has reached a peak heat release rate of 3,120 kW in tests.&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot;&amp;gt;NFPA 921 (2004), as cited in Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt; The foam can also smoulder for long periods after ignition by a cigarette.&amp;lt;ref name=&amp;quot;BA-6-109&amp;quot; /&amp;gt; In 2003 polyurethane foam on the walls of the Station nightclub in the United States was ignited by pyrotechnics, and 100 people died.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Composition and manufacture ==&lt;br /&gt;
Polyurethanes are a group of polymers produced in two general forms: foams, which may be flexible, semi-flexible or rigid, and elastomers, which include casting compounds, adhesives, coatings and spandex fibre. The basic reaction joins isocyanates with materials that carry reactive hydrogen, such as polyethers, castor oils, amines, carboxylic acids and water. By varying the number of branchings in the molecule, polyurethanes can be made either thermoplastic or thermosetting.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In the SFPE Handbook, Beyler and Hirschler describe polyurethanes as polymers with the characteristic group –NH–COO– in their repeating unit, normally made by condensation of polyisocyanates and polyols. Their principal use is as flexible and rigid foams or as thermal insulation.&amp;lt;ref name=&amp;quot;BH-1-111&amp;quot; /&amp;gt; Rigid polyurethanes are so highly cross-linked that it becomes impossible to speak of a molecular weight.&amp;lt;ref name=&amp;quot;BH-1-129&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-129.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A foam is any polymeric material with a low-density cellular structure, in which the cells can be open or closed.&amp;lt;ref name=&amp;quot;BC-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), pp. 6-209–6-210.&amp;lt;/ref&amp;gt; Flexible urethane foams for upholstery and garments, and rigid foams for poured-in-place construction or refrigeration insulation, are blown by steam and carbon dioxide. Both gases are by-products of the reaction that forms the urethane resin, and foams of lower density can be made by adding a low-boiling hydrocarbon to the mixture.&amp;lt;ref name=&amp;quot;OU-9-62&amp;quot;&amp;gt;Ouellette (2008), p. 9-62.&amp;lt;/ref&amp;gt; Reaction injection moulding is used mainly for polyurethane elastomers and foams with a solid skin and a cellular core. Two or more pressurised reactive streams are mixed at high pressure and injected into a mould, where the reaction continues until the product has set.&amp;lt;ref name=&amp;quot;OU-9-60&amp;quot;&amp;gt;Ouellette (2008), p. 9-60.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Flexible foam is used in upholstered furniture, bedding, sponges, toys, clothing and medical dressings, and rigid urethane foam is used for insulation in building construction.&amp;lt;ref name=&amp;quot;BC-6-222&amp;quot; /&amp;gt; In furniture, polyurethane foams became common in the 1960s. They were first used plain, but today often carry a &amp;quot;topper&amp;quot; layer of polyester batting.&amp;lt;ref name=&amp;quot;BA-6-106&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-106.&amp;lt;/ref&amp;gt; A 1997 survey by the US Consumer Product Safety Commission found polyester batting over polyurethane foam in 76 % of upholstered furniture, polyurethane foam alone in 17 % and other padding in 6 %.&amp;lt;ref name=&amp;quot;BA-6-106&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-110&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-110.&amp;lt;/ref&amp;gt; The handbook lists densities of 29 to 47 kg/m³ for flexible foams and 36 to 321 kg/m³ for rigid foams.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot;&amp;gt;Babrauskas (2008a), p. 6-283.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Thermal properties and ignitability ==&lt;br /&gt;
The ease of ignition of polyurethane foam follows from its thermal properties. Typical values are a thermal conductivity of 0.034 W/(m·K), a density of 20 kg/m³ and a heat capacity of 1,400 J/(kg·K).&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot;&amp;gt;Van Rossum (2027), §5.5.&amp;lt;/ref&amp;gt; For yellow pine the conductivity is more than 4 times higher, the density more than 30 times and the heat capacity twice as high. Polyurethane therefore cannot conduct heat away from its surface as well as wood and needs less energy to ignite.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt; The product of the three properties, the thermal inertia &amp;#039;&amp;#039;kρc&amp;#039;&amp;#039;, is about 950 W²·s/(m⁴·K²) for the foam against about 255,000 W²·s/(m⁴·K²) for pine, a factor of about 270.&lt;br /&gt;
&lt;br /&gt;
Drysdale illustrates the effect with everyday experience: a hand placed on a block of polyurethane foam feels warm, because the foam does not conduct heat away from the skin. He gives a thermal inertia of 950 W²·s/(m⁴·K²) for the foam and 780,000 W²·s/(m⁴·K²) for oak.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot;&amp;gt;Drysdale (2008), p. 2-8.&amp;lt;/ref&amp;gt; Polyurethane foam can therefore be ignited very easily, whereas solid polyurethane of high density is relatively difficult to ignite.&amp;lt;ref name=&amp;quot;DR-2-17&amp;quot; /&amp;gt; NUREG-1805 draws the general conclusion that density is the most important material property for ignition: the surface of a low-density material heats more rapidly and ignites sooner.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot;&amp;gt;Iqbal and Salley (2004), pp. 6-5, 6-7.&amp;lt;/ref&amp;gt; In experiments by the US National Institute of Standards and Technology (NIST) after the Station fire, wall-mounted ether-based polyurethane foam ignited within 10 seconds when exposed to pyrotechnics like those used in the nightclub. The sparks did not have enough energy to ignite birch plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Measured ignition properties vary widely. The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039;, citing Babrauskas (2003), give a minimum heat flux for piloted ignition of below 10 to 16 kW/m² for flexible foam and below 10 kW/m² for rigid foam. For autoignition the values are 16 kW/m² for flexible foam and 22 to 26 kW/m² for rigid foam.&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot;&amp;gt;Babrauskas (2003), as cited in National Research Council of Canada et al. (2005), p. 3.3-4.&amp;lt;/ref&amp;gt; Table 6.17.7 of the NFPA handbook lists 16 to 30 kW/m² for flexible and 20 to 28 kW/m² for rigid foams. It gives ignition temperatures of 729 to 852 K (456 to 579 °C) for flexible foams, whereas NUREG-1805 lists 280 °C.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-7.&amp;lt;/ref&amp;gt; Babrauskas attributes such spreads to differences in specimen size, orientation, air flow, heat flux and composition.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Estimating the time to ignition ==&lt;br /&gt;
For a thick solid exposed to a constant radiant heat flux, the time to ignition is the time its surface needs to reach the ignition temperature. This time grows with the thermal inertia and with the square of the temperature rise required. It falls with the square of the amount by which the heat flux exceeds the critical heat flux, below which ignition does not occur. NUREG-1805 gives this relation as the method of Mikkola and Wichman, taken from the SFPE engineering guide on piloted ignition:&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-8.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;t_{ig} = \frac{\pi}{4}\, k\rho c\, \frac{\left(T_{ig} - T_a\right)^2}{\left(\dot q&amp;#039;&amp;#039;_r - \dot q&amp;#039;&amp;#039;_{cr}\right)^2}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;t_{ig}&amp;lt;/math&amp;gt; || Time to ignition || s&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;k\rho c&amp;lt;/math&amp;gt; || Thermal inertia of the material || (kW/(m²·K))²·s&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;T_{ig}&amp;lt;/math&amp;gt; || Ignition temperature || °C&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;T_a&amp;lt;/math&amp;gt; || Ambient temperature || °C&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot q&amp;#039;&amp;#039;_r&amp;lt;/math&amp;gt; || External (radiant) heat flux || kW/m²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot q&amp;#039;&amp;#039;_{cr}&amp;lt;/math&amp;gt; || Critical heat flux for ignition || kW/m²&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The relation assumes a thermally thick material, through which the heat wave has not yet reached the rear face. A slab behaves in this way until the heated depth, approximately &amp;lt;math&amp;gt;2\sqrt{\alpha t}&amp;lt;/math&amp;gt; with &amp;#039;&amp;#039;α&amp;#039;&amp;#039; the thermal diffusivity, approaches its thickness.&amp;lt;ref name=&amp;quot;DR-2-8&amp;quot; /&amp;gt; The critical heat flux and the ignition temperature are not unique material constants. Each correlation derives them in its own way from test data, and NUREG-1805 warns that the critical heat flux should not be confused with the minimum heat flux for ignition.&amp;lt;ref name=&amp;quot;IS-6-5&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
As a worked example, NUREG-1805 lists for polyurethane foam an ignition temperature of 280 °C and a thermal inertia of 0.00095 (kW/(m²·K))²·s. For 12.3 mm plywood it gives 390 °C and 0.16 (kW/(m²·K))²·s.&amp;lt;ref name=&amp;quot;IS-6-7&amp;quot; /&amp;gt; NUREG-1805 lists a critical heat flux of 10 kW/m² for red oak and Douglas fir. The same value is assumed here for the plywood and for the foam, for which it lies at the lower end of the range quoted above.&amp;lt;ref name=&amp;quot;IS-6-6&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-6.&amp;lt;/ref&amp;gt; With an exposure of 20 kW/m² and an ambient temperature of 20 °C, the foam needs&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;t_{ig} = \frac{\pi}{4} \times 0.00095 \times \frac{(280-20)^2}{(20-10)^2} \approx 0.50\ \mathrm{s}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
while the plywood needs about 172 s under the same conditions. If the critical heat flux of the foam is taken as 16 kW/m² instead, the foam still ignites after only about 3.1 s.&amp;lt;ref name=&amp;quot;IS-6-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IFEG-3.3-4&amp;quot; /&amp;gt; Rounded down to the safe side, the foam surface ignites within 0.5 to 3 s and the plywood after about 170 s, a factor of several hundred.&lt;br /&gt;
&lt;br /&gt;
With a thermal diffusivity of 1.21 × 10&amp;lt;sup&amp;gt;−6&amp;lt;/sup&amp;gt; m²/s for the foam, the heated depth is only 1.6 to 3.9 mm. A foam cushion or wall lining therefore behaves as thermally thick.&amp;lt;ref name=&amp;quot;VR-5.5&amp;quot; /&amp;gt; For comparison, NUREG-1805 reports a measured ignition time of 250 s for wood particle board at 20 kW/m², the same order as the calculated value for plywood.&amp;lt;ref name=&amp;quot;IS-6-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 6-4.&amp;lt;/ref&amp;gt; The result is consistent with the NIST observation that pyrotechnic sparks ignited exposed foam within 10 seconds but did not ignite plywood.&amp;lt;ref name=&amp;quot;MS-2-34&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Burning behaviour and heat release ==&lt;br /&gt;
The way the foam decomposes shapes its role among [[plastics in fire]]. As a class, polyurethanes do not break down below 475 K (202 °C). A major mechanism is the breaking of the bond between polyol and isocyanate formed during polymerisation: the isocyanate vaporises and recondenses as a smoke, while the liquid polyol remains and decomposes further.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot;&amp;gt;Beyler and Hirschler (2002), p. 1-128.&amp;lt;/ref&amp;gt; In flexible foams one decomposition path produces gaseous isocyanates that repolymerise in the gas phase and condense as a &amp;quot;yellow smoke&amp;quot;.&amp;lt;ref name=&amp;quot;BH-1-114&amp;quot;&amp;gt;Beyler and Hirschler (2002), pp. 1-114–1-115.&amp;lt;/ref&amp;gt; The NFPA handbook describes the same process as the formation of liquid polyols and gaseous isocyanates, and notes that some polyurethane foams form a char.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot;&amp;gt;Madrzykowski and Stroup (2008), pp. 2-32–2-33.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The liquid stage matters in real fires. In a fire in bulk storage of flexible foam blocks, the liquefied plastic can form a pool that burns like a flammable liquid with a high flash point. Fire fighters may therefore meet a pool fire similar to a Class B fire beneath burning foam.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BC-6-230&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-230.&amp;lt;/ref&amp;gt; Studies in England showed that pool burning can account for about 50 % of the peak [[heat release rate]] of an upholstered chair.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-126.&amp;lt;/ref&amp;gt; Expanded, low-density foam also generally burns with a higher heat release rate than the same polymer in rigid, unexpanded form.&amp;lt;ref name=&amp;quot;CU-2-50b&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The table shows peak heat release rates of furnishings in unconfined burning, as listed in NFPA 921 (2004 edition) and reproduced in the 2008 handbook.&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot; /&amp;gt; Masses are converted from pounds, and the polyurethane items burn several times more intensely than the cotton ones of similar mass.&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Representative peak heat release rates, unconfined burning&amp;lt;ref name=&amp;quot;CU-2-50&amp;quot; /&amp;gt;&lt;br /&gt;
! Item !! Mass (kg) !! Peak heat release rate (kW)&lt;br /&gt;
|-&lt;br /&gt;
| Cotton easy chair || 17.7–31.8 || 290–370&lt;br /&gt;
|-&lt;br /&gt;
| Cotton mattress || 11.8–13.2 || 40–970&lt;br /&gt;
|-&lt;br /&gt;
| Polyurethane mattress || 3.2–14.1 || 810–2,630&lt;br /&gt;
|-&lt;br /&gt;
| Polyurethane easy chair || 12.2–27.7 || 1,350–1,990&lt;br /&gt;
|-&lt;br /&gt;
| Polyurethane sofa || 51.3 || 3,120&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Babrauskas notes that a medium-sized sofa can reach 2 to 3 MW only 3 to 5 minutes after ignition, and that about 5 MW is common for large sofas. Less than 2 MW is enough to cause flashover in a room with a normal-sized door.&amp;lt;ref name=&amp;quot;BA-6-120&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-120.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; uses 2.5 MW as a guide value for an average living-room sofa.&amp;lt;ref name=&amp;quot;VR-4.5&amp;quot;&amp;gt;Van Rossum (2027), §4.5.&amp;lt;/ref&amp;gt; When polyurethane foam replaced traditional padding in the 1970s, the heat release rates of furniture rose to many times those of traditional types.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-29.&amp;lt;/ref&amp;gt; These values make the foam a main driver of the [[upholstered furniture fire]].&lt;br /&gt;
&lt;br /&gt;
In tests relevant to [[mattress flammability]], mattresses show the same pattern. In SFPE Handbook data, a polyurethane foam mattress of 14 kg with PVC ticking reached 2,630 kW, and mattresses of 4 to 6 kg reached 760 to 1,620 kW. A neoprene mattress of 18 kg reached only 70 kW.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-21.&amp;lt;/ref&amp;gt; In another series, mattresses with a bench-scale heat release rate below 165 kW/m² gave room fires of less than 100 kW. Those above it gave fires of 1 to 2 MW, with an abrupt transition.&amp;lt;ref name=&amp;quot;BAS-3-21&amp;quot; /&amp;gt; In US prisons, certain types of polyurethane foam mattresses are a significant fuel source because they support fast fire development, high heat release and heavy smoke production.&amp;lt;ref name=&amp;quot;JA-20-134&amp;quot;&amp;gt;Jaeger (2008), p. 20-134.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Values for the heat of combustion differ with formulation and method. The handbook tables give a net heat of combustion of 26.30 MJ/kg for polyurethane and 22.70 MJ/kg for an ester-based grade, and the &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; give 26 MJ/kg for polyurethane foam.&amp;lt;ref name=&amp;quot;BA-6-278&amp;quot;&amp;gt;Babrauskas (2008a), p. 6-278.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;IFEG-3.3-6&amp;quot;&amp;gt;National Research Council of Canada et al. (2005), p. 3.3-6.&amp;lt;/ref&amp;gt; The Australian Fire Safety Verification Method data sheets give chemical heats of combustion of 17.6 MJ/kg for flexible and 16.9 MJ/kg for rigid foam from well-ventilated bench-scale tests.&amp;lt;ref name=&amp;quot;ABCB-B2-21&amp;quot;&amp;gt;Australian Building Codes Board (2020a), Data Sheet B2, p. 21.&amp;lt;/ref&amp;gt; The effective heat of gasification of flexible foam is low, 1.2 to 2.7 MJ/kg.&amp;lt;ref name=&amp;quot;BA-6-283&amp;quot; /&amp;gt; A low heat of gasification increases the hazard, because less heat is needed to produce fuel vapour.&amp;lt;ref name=&amp;quot;MS-2-32&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Smoke and toxic gases ==&lt;br /&gt;
Dense smoke is characteristic of both treated and untreated urethane foams. In a study of smoke density cited in the handbook, urethane foams under flaming or non-flaming exposure obscured vision within a fraction of a minute, and under flaming exposure in less than 15 seconds.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt; For modelling, the Australian data sheets give soot yields of 0.188 kg/kg for flexible and 0.118 kg/kg for rigid foam, values that NUREG-1805 also lists.&amp;lt;ref name=&amp;quot;ABCB-B2-21&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-18-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 18-4.&amp;lt;/ref&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; quotes 0.23 kg/kg for polyurethane.&amp;lt;ref name=&amp;quot;VR-6.2&amp;quot;&amp;gt;Karlsson and Quintiere (2000), as cited in Van Rossum (2027), §6.2.&amp;lt;/ref&amp;gt; The C/VM2 commentary of New Zealand points out that reported soot yields for flexible polyurethane range from 0.01 to 0.23, more than an order of magnitude. Carbon monoxide yields vary by a factor of 4 and the effective heat of combustion by about ±25 %, because of different test conditions and additives.&amp;lt;ref name=&amp;quot;MBIE-57&amp;quot;&amp;gt;Ministry of Business, Innovation and Employment (2013), p. 57.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Because polyurethane contains nitrogen, its fire gases can include hydrogen cyanide (HCN). Nitrogen-containing polymers release HCN in smouldering fires, during pyrolysis and in flaming combustion.&amp;lt;ref name=&amp;quot;GB-6-13&amp;quot; /&amp;gt; The lethal dose of HCN is about 25 times smaller than that of carbon monoxide.&amp;lt;ref name=&amp;quot;GB-6-15&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-15.&amp;lt;/ref&amp;gt; The yields of HCN and carbon monoxide from polyurethanes increase with the pyrolysis temperature, and other toxic products include nitrogen oxides, nitriles and tolylene diisocyanate.&amp;lt;ref name=&amp;quot;BH-1-128&amp;quot; /&amp;gt; The &amp;#039;&amp;#039;International Fire Engineering Guidelines&amp;#039;&amp;#039; note that smouldering polyurethane foam can yield significant HCN, so analysis cannot always be restricted to carbon monoxide.&amp;lt;ref name=&amp;quot;IFEG-2.4-12&amp;quot;&amp;gt;National Research Council of Canada et al. (2005), p. 2.4-12.&amp;lt;/ref&amp;gt; Concern about &amp;quot;supertoxicants&amp;quot; in fire smoke has diminished, and one of the few documented examples was a neurotoxin formed from a non-commercial rigid polyurethane foam.&amp;lt;ref name=&amp;quot;GB-6-17&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-17.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The NIST reconstruction of the Station nightclub fire shows how fast these hazards develop. Non-fire-retardant, ether-based polyurethane foam was glued over plywood panelling in a drummer&amp;#039;s alcove, and within 60 seconds the alcove was fully involved. In less than 90 seconds, the gas temperature at 1.4 m above the floor exceeded 400 °C and the heat flux exceeded 30 kW/m². At the same time the oxygen volume fraction fell below 0.05, while the HCN and carbon monoxide fractions exceeded 0.0015 and 0.03.&amp;lt;ref name=&amp;quot;GB-6-28&amp;quot;&amp;gt;Gann and Bryner (2008), pp. 6-28–6-29.&amp;lt;/ref&amp;gt; Occupants would likely have had less than 1.5 minutes to escape. In a duplicate test with automatic sprinklers, the sprinklers operated within 30 seconds and conditions remained tenable.&amp;lt;ref name=&amp;quot;GB-6-29&amp;quot;&amp;gt;Gann and Bryner (2008), pp. 6-29–6-30.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Smouldering ==&lt;br /&gt;
Flexible foam also takes part in [[smouldering]], the slow, flameless combustion typically started by a cigarette in upholstery or bedding. This scenario makes smouldering a major contributor to residential fire deaths. The combination of a cellulosic fabric with polyurethane foam can smoulder over a much wider range of conditions than the foam alone, because the fabric adds heat to the foam while competing for oxygen.&amp;lt;ref name=&amp;quot;OH-2-206&amp;quot;&amp;gt;Ohlemiller (2002), p. 2-206.&amp;lt;/ref&amp;gt; Without oxygen many flexible foams form no char, yet char oxidation is a necessary source of heat for smouldering. In one test configuration the evolved gases contained 6 to 7 mole % carbon monoxide.&amp;lt;ref name=&amp;quot;OH-2-202&amp;quot;&amp;gt;Ohlemiller (2002), p. 2-202.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Smouldering may or may not turn into flaming. Times of 22 minutes to several hours between placing a cigarette and the onset of flaming have been reported, and in a closed room flaming can revert to smouldering when the oxygen runs out.&amp;lt;ref name=&amp;quot;BA-6-109&amp;quot; /&amp;gt; In polyurethane foam the transition to flaming appeared to start within the char layer left behind by the smoulder front, rather than at the foam surface.&amp;lt;ref name=&amp;quot;OH-2-208&amp;quot;&amp;gt;Ohlemiller (2002), p. 2-208.&amp;lt;/ref&amp;gt; Smouldering fires involving polyurethane foams have also produced smoke explosions, when unburned fuel and carbon monoxide formed a flammable mixture that later ignited.&amp;lt;ref name=&amp;quot;IS-15-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 15-4.&amp;lt;/ref&amp;gt; Soaking or even immersing a smouldering item in water may not ensure extinction. The handbook advises removing such items from the premises, tearing them apart and wetting the pieces thoroughly.&amp;lt;ref name=&amp;quot;BA-6-110&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire-retardant grades and protection ==&lt;br /&gt;
Several strategies reduce the hazard of furniture foam. In California, Technical Bulletin 117 tested naked foams with a vertical Bunsen burner, and a small amount of fire retardant normally produced a dramatic improvement in this test. The state has required fire-retardant-treated, or equivalent, furniture foams since 1975.&amp;lt;ref name=&amp;quot;BA-6-113&amp;quot;&amp;gt;Babrauskas (2008b), pp. 6-113, 6-115.&amp;lt;/ref&amp;gt; Full-scale tests at NIST showed, however, that a chair with foam complying with Technical Bulletin 117 gave essentially the same heat release rate as one with ordinary foam.&amp;lt;ref name=&amp;quot;BAS-3-29&amp;quot; /&amp;gt; Advanced foam formulations mainly improve the heat release rate rather than the ignitability.&amp;lt;ref name=&amp;quot;BA-6-115&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-115.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In the United Kingdom, regulations from the late 1980s required furniture and mattresses to resist small flames and cigarettes. Furniture there generally uses advanced fire-retardant polyurethane foams, and a government survey claimed a 40:1 benefit to cost ratio, although a US reanalysis disputed this.&amp;lt;ref name=&amp;quot;BA-6-107&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-107.&amp;lt;/ref&amp;gt; Babrauskas adds that materials with much lower toxicity per gram are not available, so reducing the heat release rate is the practical way to limit the toxic hazard of furniture.&amp;lt;ref name=&amp;quot;BA-6-124&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-124.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Design measures also work. The simplest strategy is to use less foam, because peak heat release rate depends strongly on the mass of upholstery. Ordinary high-resiliency foam can be replaced by combustion-modified high-resiliency foam, and lightweight interliners of 70 to 170 g/m² between fabric and foam act as a radiation shield and flame barrier.&amp;lt;ref name=&amp;quot;BA-6-124&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;BA-6-125&amp;quot;&amp;gt;Babrauskas (2008b), p. 6-125.&amp;lt;/ref&amp;gt; For mattresses, an add-on barrier cover reduced the peak heat release rate of one commercial mattress from 1,900 kW to 100 kW. Mattresses made with a barrier in the factory gave 20 to 40 kW.&amp;lt;ref name=&amp;quot;BA-6-126&amp;quot; /&amp;gt; Such [[flame retardant]] treatments and barriers are at the core of mattress and furniture fire standards.&lt;br /&gt;
&lt;br /&gt;
Rigid and sprayed foams used as [[foam plastic insulation]] raise similar problems. Untreated rigid polyurethane burns rapidly and is readily ignited, while fire-retardant grades resist small, short ignition sources and often stop burning when the flame is removed. In a 1969 review of fires, a high rate of flame spread appeared to be especially typical of sprayed-on polyurethane and rigid polyurethane boards, and tunnel flame spread ratings ranged from 5 to 1,375.&amp;lt;ref name=&amp;quot;BC-6-225&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In the United States, model building codes as described in the 2008 handbook require foamed plastic wall insulation to be covered by a thermal barrier such as 12.5 mm (½ in.) gypsum board.&amp;lt;ref name=&amp;quot;BC-6-229&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-229.&amp;lt;/ref&amp;gt; NFPA 101 and NFPA 5000, as described by Hirschler (2008b), do not allow foam plastics as interior finish unless fire tests support their use.&amp;lt;ref name=&amp;quot;HI-18-36&amp;quot;&amp;gt;Hirschler (2008b), p. 18-36.&amp;lt;/ref&amp;gt; In New Zealand, the 2013 commentary to the first edition of C/VM2 treats exposed polyurethane foams as typical Group Number 4 linings. Such linings lead to flashover within 2 minutes and are not acceptable in occupied spaces.&amp;lt;ref name=&amp;quot;MBIE-21&amp;quot;&amp;gt;Ministry of Business, Innovation and Employment (2013), p. 21.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Industrial uses carry their own risks. In 1975, at the Browns Ferry nuclear power plant in the United States, electricians checking a cable penetration seal of polyurethane with a candle flame ignited the sealant. The fire spread to the grouped cables, reached temperatures up to 816 °C and damaged more than 1,600 cables.&amp;lt;ref name=&amp;quot;IS-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;SH-9-187&amp;quot;&amp;gt;Sheridan (2008), p. 9-187.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Thermoplastics and thermosets]]&lt;br /&gt;
* [[Rubber and elastomers]]&lt;br /&gt;
* [[Furniture calorimeter]]&lt;br /&gt;
* [[Cone calorimeter]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Australian Building Codes Board. (2020a). &amp;#039;&amp;#039;Data sheets: Fire Safety Verification Method&amp;#039;&amp;#039; (Handbook annex, Print version 1.1).&lt;br /&gt;
* Babrauskas, V. (2002b). Heat release rates. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-1–3-37). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Babrauskas, V. (2008a). Tables and charts. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-269–6-294). National Fire Protection Association.&lt;br /&gt;
* Babrauskas, V. (2008b). Upholstered furniture and mattresses. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-103–6-128). National Fire Protection Association.&lt;br /&gt;
* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;br /&gt;
* Beyler, C. L., &amp;amp; Hirschler, M. M. (2002). Thermal decomposition of polymers. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-110–1-131). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Custer, R. L. P. (2008). Dynamics of compartment fire growth. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-49–2-58). National Fire Protection Association.&lt;br /&gt;
* Drysdale, D. (2008). Physics and chemistry of fire. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-3–2-20). National Fire Protection Association.&lt;br /&gt;
* Gann, R. G., &amp;amp; Bryner, N. P. (2008). Combustion products and their effects on life safety. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-11–6-34). National Fire Protection Association.&lt;br /&gt;
* Hirschler, M. M. (2008b). Interior finish. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 18-23–18-42). National Fire Protection Association.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Jaeger, T. W. (2008). Detention and correctional occupancies. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 20-129–20-138). National Fire Protection Association.&lt;br /&gt;
* Madrzykowski, D., &amp;amp; Stroup, D. W. (2008). Flammability hazard of materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-31–2-48). National Fire Protection Association.&lt;br /&gt;
* Ministry of Business, Innovation and Employment. (2013). &amp;#039;&amp;#039;Commentary for Building Code clauses C1–C6 and Verification Method C/VM2&amp;#039;&amp;#039;.&lt;br /&gt;
* National Research Council of Canada, International Code Council, Department of Building and Housing, &amp;amp; Australian Building Codes Board. (2005). &amp;#039;&amp;#039;International fire engineering guidelines&amp;#039;&amp;#039; (2005 ed.). Australian Building Codes Board.&lt;br /&gt;
* Ohlemiller, T. J. (2002). Smoldering combustion. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-200–2-210). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Ouellette, G. (2008). Plastics industry and related process hazards. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-53–9-65). National Fire Protection Association.&lt;br /&gt;
* Sheridan, D. J. (2008). Electric generating plants. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-179–9-189). National Fire Protection Association.&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
&lt;br /&gt;
[[Category:Materials &amp;amp; Fire Testing]]&lt;/div&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
</feed>