<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Incinerator</id>
	<title>Incinerator - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Incinerator"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Incinerator&amp;action=history"/>
	<updated>2026-11-21T23:29:58Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=6685&amp;oldid=prev</id>
		<title>Mark: Remove source references from image captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=6685&amp;oldid=prev"/>
		<updated>2026-11-13T07:31:17Z</updated>

		<summary type="html">&lt;p&gt;Remove source references from image captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:31, 13 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l7&quot;&gt;Line 7:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 7:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Three basic types are used for solid waste in industrial, institutional and commercial facilities.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A multiple-chamber incinerator has a primary chamber, in which the waste burns out, and one or more secondary chambers, in which combustibles carried in the flue gas are burned. It runs with 200 to 300 % excess air and is now used almost only for pathological waste such as animal carcasses.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A controlled-air incinerator works in two stages. Waste in the primary chamber burns under starved-air, or oxygen-deficient, conditions, and the smoke and volatile gases then burn in a secondary chamber with 100 to 200 % excess air. Most solid waste incinerators built in the 30 to 40 years before 2008 were of this type.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Three basic types are used for solid waste in industrial, institutional and commercial facilities.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A multiple-chamber incinerator has a primary chamber, in which the waste burns out, and one or more secondary chambers, in which combustibles carried in the flue gas are burned. It runs with 200 to 300 % excess air and is now used almost only for pathological waste such as animal carcasses.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A controlled-air incinerator works in two stages. Waste in the primary chamber burns under starved-air, or oxygen-deficient, conditions, and the smoke and volatile gases then burn in a secondary chamber with 100 to 200 % excess air. Most solid waste incinerators built in the 30 to 40 years before 2008 were of this type.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v1.svg|thumb|upright=1.5|alt=Cross-section of a two-chamber controlled-air incinerator with mechanical loader, starved-air primary chamber, secondary chamber, burners and stack|Controlled-air incinerator. Waste burns with too little air in the primary chamber; its smoke and volatile gases burn out with 100 to 200 % excess air in the secondary chamber above&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Doucet and Gilyeat (2008), pp. 11-6–11-7&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v1.svg|thumb|upright=1.5|alt=Cross-section of a two-chamber controlled-air incinerator with mechanical loader, starved-air primary chamber, secondary chamber, burners and stack|Controlled-air incinerator. Waste burns with too little air in the primary chamber; its smoke and volatile gases burn out with 100 to 200 % excess air in the secondary chamber above.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A rotary kiln is an inclined cylindrical chamber that turns slowly on its axis. The rotation tumbles the waste and moves the ash to the discharge end, and a separate secondary chamber burns the flue gas combustibles.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Kilns accept solids, sludges, liquids and fumes and are used mainly for hazardous and mixed waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-21.&amp;lt;/ref&amp;gt; In a multiple-hearth incinerator, used almost only for sludge, rotating rabble arms push the sludge across a vertical stack of refractory hearths. A fluidised-bed incinerator injects the waste into a hot bed of sand that a high-pressure blower keeps in suspension.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A rotary kiln is an inclined cylindrical chamber that turns slowly on its axis. The rotation tumbles the waste and moves the ash to the discharge end, and a separate secondary chamber burns the flue gas combustibles.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Kilns accept solids, sludges, liquids and fumes and are used mainly for hazardous and mixed waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-21.&amp;lt;/ref&amp;gt; In a multiple-hearth incinerator, used almost only for sludge, rotating rabble arms push the sludge across a vertical stack of refractory hearths. A fluidised-bed incinerator injects the waste into a hot bed of sand that a high-pressure blower keeps in suspension.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l48&quot;&gt;Line 48:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 48:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Clearance to combustibles|Clearances to combustible materials]] keep exposed combustibles below dangerous temperatures and were set by testing laboratories and field experience.&amp;lt;ref name=&amp;quot;GoreWillse-10-28&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-28.&amp;lt;/ref&amp;gt; Table 2 gives the standard clearances for incinerators, which apply unless a listed appliance shows otherwise.&amp;lt;ref name=&amp;quot;GoreWillse-10-29&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-29.&amp;lt;/ref&amp;gt; For brick-encased commercial units, the clearance above may be reduced to 914 mm (36 in.) and those at the sides and rear to 457 mm (18 in.). Domestic units need at least 1219 mm (48 in.) above the charging door.&amp;lt;ref name=&amp;quot;GoreWillse-10-30&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-30.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Clearance to combustibles|Clearances to combustible materials]] keep exposed combustibles below dangerous temperatures and were set by testing laboratories and field experience.&amp;lt;ref name=&amp;quot;GoreWillse-10-28&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-28.&amp;lt;/ref&amp;gt; Table 2 gives the standard clearances for incinerators, which apply unless a listed appliance shows otherwise.&amp;lt;ref name=&amp;quot;GoreWillse-10-29&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-29.&amp;lt;/ref&amp;gt; For brick-encased commercial units, the clearance above may be reduced to 914 mm (36 in.) and those at the sides and rear to 457 mm (18 in.). Domestic units need at least 1219 mm (48 in.) above the charging door.&amp;lt;ref name=&amp;quot;GoreWillse-10-30&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-30.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v4.svg|thumb|upright=1.5|alt=Plan and elevation of a domestic and a commercial incinerator with dimensioned clearances to combustible walls and ceiling|Standard clearances from incinerators to combustible material in US practice around 2008, unless a listed appliance shows otherwise&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Gore Willse (2008a), pp. 10-29–10-30&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v4.svg|thumb|upright=1.5|alt=Plan and elevation of a domestic and a commercial incinerator with dimensioned clearances to combustible walls and ceiling|Standard clearances from incinerators to combustible material in US practice around 2008, unless a listed appliance shows otherwise.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;{| class=&amp;quot;wikitable&amp;quot;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;{| class=&amp;quot;wikitable&amp;quot;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l69&quot;&gt;Line 69:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 69:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Mechanical loaders are almost always used above about 136 kg/h (300 lb/h). NFPA 82 requires charging controls that prevent flames, combustion gases and heat from escaping during loading, which in effect calls for a mechanical loader unless the unit is batch-loaded.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; In a hopper and ram loader, the hopper cover closes, the fire door opens, a ram pushes the waste in and withdraws, and the fire door closes before the cover reopens. Because one door is always shut, the loader works as an airlock.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Mechanical loaders are almost always used above about 136 kg/h (300 lb/h). NFPA 82 requires charging controls that prevent flames, combustion gases and heat from escaping during loading, which in effect calls for a mechanical loader unless the unit is batch-loaded.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; In a hopper and ram loader, the hopper cover closes, the fire door opens, a ram pushes the waste in and withdraws, and the fire door closes before the cover reopens. Because one door is always shut, the loader works as an airlock.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v2.svg|thumb|upright=1.5|alt=Six-step sequence of a hopper and ram incinerator loader showing that the hopper cover and the fire door are never open at the same time|Loading cycle of a hopper and ram loader. Because the hopper cover and the fire door are never open together, the loader works as an airlock between the furnace and the room&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Doucet and Gilyeat (2008), p. 11-8&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v2.svg|thumb|upright=1.5|alt=Six-step sequence of a hopper and ram incinerator loader showing that the hopper cover and the fire door are never open at the same time|Loading cycle of a hopper and ram loader. Because the hopper cover and the fire door are never open together, the loader works as an airlock between the furnace and the room.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two faults need attention. Waste lodged under the fire door can stop it closing, ignite and spread fire back into the hopper, so the door should be closed by power, not gravity. The hot ram face can also pick up melting plastic bags and carry burning material back, so the ram should be water-cooled or quenched after every stroke.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Recommended extras are a flame scanner, a high-temperature sprinkler over the hopper independent of the room [[Sprinkler system|sprinkler system]], and an emergency switch that injects the hopper contents at once.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two faults need attention. Waste lodged under the fire door can stop it closing, ignite and spread fire back into the hopper, so the door should be closed by power, not gravity. The hot ram face can also pick up melting plastic bags and carry burning material back, so the ram should be water-cooled or quenched after every stroke.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Recommended extras are a flame scanner, a high-temperature sprinkler over the hopper independent of the room [[Sprinkler system|sprinkler system]], and an emergency switch that injects the hopper contents at once.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l108&quot;&gt;Line 108:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 108:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v3.svg|thumb|upright=1.5|alt=Line chart of equivalence ratio against air supply per kilogram of waste for cellulose and polyethylene, with the 10 to 20 kg per kg band shaded|Equivalence ratio against air supply for cellulose and polyethylene. The shaded band is the 10 to 20 kg of air per kilogram typical of incinerators; above the line at 1 the burning is fuel-rich&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Drysdale (2002), p. 1-93; Doucet and Gilyeat (2008), p. 11-9; Gann and Bryner (2008), p. 6-13&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-incinerator-v3.svg|thumb|upright=1.5|alt=Line chart of equivalence ratio against air supply per kilogram of waste for cellulose and polyethylene, with the 10 to 20 kg per kg band shaded|Equivalence ratio against air supply for cellulose and polyethylene. The shaded band is the 10 to 20 kg of air per kilogram typical of incinerators; above the line at 1 the burning is fuel-rich.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&amp;#039;&amp;#039;T&amp;#039;&amp;#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. On this assumption, without auxiliary fuel input, the louver needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area; actual sizing must use total heat input, including auxiliary burners.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&amp;#039;&amp;#039;T&amp;#039;&amp;#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. On this assumption, without auxiliary fuel input, the louver needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area; actual sizing must use total heat input, including auxiliary burners.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5823:rev-6685:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=5823&amp;oldid=prev</id>
		<title>Peter: Add SVG figures fse-incinerator-v1.svg, fse-incinerator-v2.svg, fse-incinerator-v3.svg, fse-incinerator-v4.svg (list-3 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=5823&amp;oldid=prev"/>
		<updated>2026-11-12T12:12:13Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-incinerator-v1.svg, fse-incinerator-v2.svg, fse-incinerator-v3.svg, fse-incinerator-v4.svg (list-3 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 13:12, 12 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l7&quot;&gt;Line 7:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 7:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Three basic types are used for solid waste in industrial, institutional and commercial facilities.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A multiple-chamber incinerator has a primary chamber, in which the waste burns out, and one or more secondary chambers, in which combustibles carried in the flue gas are burned. It runs with 200 to 300 % excess air and is now used almost only for pathological waste such as animal carcasses.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A controlled-air incinerator works in two stages. Waste in the primary chamber burns under starved-air, or oxygen-deficient, conditions, and the smoke and volatile gases then burn in a secondary chamber with 100 to 200 % excess air. Most solid waste incinerators built in the 30 to 40 years before 2008 were of this type.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Three basic types are used for solid waste in industrial, institutional and commercial facilities.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A multiple-chamber incinerator has a primary chamber, in which the waste burns out, and one or more secondary chambers, in which combustibles carried in the flue gas are burned. It runs with 200 to 300 % excess air and is now used almost only for pathological waste such as animal carcasses.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A controlled-air incinerator works in two stages. Waste in the primary chamber burns under starved-air, or oxygen-deficient, conditions, and the smoke and volatile gases then burn in a secondary chamber with 100 to 200 % excess air. Most solid waste incinerators built in the 30 to 40 years before 2008 were of this type.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-incinerator-v1.svg|thumb|upright=1.5|alt=Cross-section of a two-chamber controlled-air incinerator with mechanical loader, starved-air primary chamber, secondary chamber, burners and stack|Controlled-air incinerator. Waste burns with too little air in the primary chamber; its smoke and volatile gases burn out with 100 to 200 % excess air in the secondary chamber above. Based on Doucet and Gilyeat (2008), pp. 11-6–11-7.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A rotary kiln is an inclined cylindrical chamber that turns slowly on its axis. The rotation tumbles the waste and moves the ash to the discharge end, and a separate secondary chamber burns the flue gas combustibles.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Kilns accept solids, sludges, liquids and fumes and are used mainly for hazardous and mixed waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-21.&amp;lt;/ref&amp;gt; In a multiple-hearth incinerator, used almost only for sludge, rotating rabble arms push the sludge across a vertical stack of refractory hearths. A fluidised-bed incinerator injects the waste into a hot bed of sand that a high-pressure blower keeps in suspension.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A rotary kiln is an inclined cylindrical chamber that turns slowly on its axis. The rotation tumbles the waste and moves the ash to the discharge end, and a separate secondary chamber burns the flue gas combustibles.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Kilns accept solids, sludges, liquids and fumes and are used mainly for hazardous and mixed waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-21.&amp;lt;/ref&amp;gt; In a multiple-hearth incinerator, used almost only for sludge, rotating rabble arms push the sludge across a vertical stack of refractory hearths. A fluidised-bed incinerator injects the waste into a hot bed of sand that a high-pressure blower keeps in suspension.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l47&quot;&gt;Line 47:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 48:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Clearance to combustibles|Clearances to combustible materials]] keep exposed combustibles below dangerous temperatures and were set by testing laboratories and field experience.&amp;lt;ref name=&amp;quot;GoreWillse-10-28&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-28.&amp;lt;/ref&amp;gt; Table 2 gives the standard clearances for incinerators, which apply unless a listed appliance shows otherwise.&amp;lt;ref name=&amp;quot;GoreWillse-10-29&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-29.&amp;lt;/ref&amp;gt; For brick-encased commercial units, the clearance above may be reduced to 914 mm (36 in.) and those at the sides and rear to 457 mm (18 in.). Domestic units need at least 1219 mm (48 in.) above the charging door.&amp;lt;ref name=&amp;quot;GoreWillse-10-30&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-30.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[Clearance to combustibles|Clearances to combustible materials]] keep exposed combustibles below dangerous temperatures and were set by testing laboratories and field experience.&amp;lt;ref name=&amp;quot;GoreWillse-10-28&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-28.&amp;lt;/ref&amp;gt; Table 2 gives the standard clearances for incinerators, which apply unless a listed appliance shows otherwise.&amp;lt;ref name=&amp;quot;GoreWillse-10-29&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-29.&amp;lt;/ref&amp;gt; For brick-encased commercial units, the clearance above may be reduced to 914 mm (36 in.) and those at the sides and rear to 457 mm (18 in.). Domestic units need at least 1219 mm (48 in.) above the charging door.&amp;lt;ref name=&amp;quot;GoreWillse-10-30&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-30.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-incinerator-v4.svg|thumb|upright=1.5|alt=Plan and elevation of a domestic and a commercial incinerator with dimensioned clearances to combustible walls and ceiling|Standard clearances from incinerators to combustible material in US practice around 2008, unless a listed appliance shows otherwise. Based on Gore Willse (2008a), pp. 10-29–10-30.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;{| class=&amp;quot;wikitable&amp;quot;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;{| class=&amp;quot;wikitable&amp;quot;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l67&quot;&gt;Line 67:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 69:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Mechanical loaders are almost always used above about 136 kg/h (300 lb/h). NFPA 82 requires charging controls that prevent flames, combustion gases and heat from escaping during loading, which in effect calls for a mechanical loader unless the unit is batch-loaded.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; In a hopper and ram loader, the hopper cover closes, the fire door opens, a ram pushes the waste in and withdraws, and the fire door closes before the cover reopens. Because one door is always shut, the loader works as an airlock.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Mechanical loaders are almost always used above about 136 kg/h (300 lb/h). NFPA 82 requires charging controls that prevent flames, combustion gases and heat from escaping during loading, which in effect calls for a mechanical loader unless the unit is batch-loaded.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; In a hopper and ram loader, the hopper cover closes, the fire door opens, a ram pushes the waste in and withdraws, and the fire door closes before the cover reopens. Because one door is always shut, the loader works as an airlock.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-incinerator-v2.svg|thumb|upright=1.5|alt=Six-step sequence of a hopper and ram incinerator loader showing that the hopper cover and the fire door are never open at the same time|Loading cycle of a hopper and ram loader. Because the hopper cover and the fire door are never open together, the loader works as an airlock between the furnace and the room. Based on Doucet and Gilyeat (2008), p. 11-8.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two faults need attention. Waste lodged under the fire door can stop it closing, ignite and spread fire back into the hopper, so the door should be closed by power, not gravity. The hot ram face can also pick up melting plastic bags and carry burning material back, so the ram should be water-cooled or quenched after every stroke.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Recommended extras are a flame scanner, a high-temperature sprinkler over the hopper independent of the room [[Sprinkler system|sprinkler system]], and an emergency switch that injects the hopper contents at once.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two faults need attention. Waste lodged under the fire door can stop it closing, ignite and spread fire back into the hopper, so the door should be closed by power, not gravity. The hot ram face can also pick up melting plastic bags and carry burning material back, so the ram should be water-cooled or quenched after every stroke.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Recommended extras are a flame scanner, a high-temperature sprinkler over the hopper independent of the room [[Sprinkler system|sprinkler system]], and an emergency switch that injects the hopper contents at once.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l105&quot;&gt;Line 105:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 108:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-incinerator-v3.svg|thumb|upright=1.5|alt=Line chart of equivalence ratio against air supply per kilogram of waste for cellulose and polyethylene, with the 10 to 20 kg per kg band shaded|Equivalence ratio against air supply for cellulose and polyethylene. The shaded band is the 10 to 20 kg of air per kilogram typical of incinerators; above the line at 1 the burning is fuel-rich. Based on Drysdale (2002), p. 1-93; Doucet and Gilyeat (2008), p. 11-9; Gann and Bryner (2008), p. 6-13.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&amp;#039;&amp;#039;T&amp;#039;&amp;#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. On this assumption, without auxiliary fuel input, the louver needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area; actual sizing must use total heat input, including auxiliary burners.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&amp;#039;&amp;#039;T&amp;#039;&amp;#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. On this assumption, without auxiliary fuel input, the louver needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area; actual sizing must use total heat input, including auxiliary burners.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4229:rev-5823:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=4229&amp;oldid=prev</id>
		<title>Mark: FSE wiki: Source audit: clarify compartment-fire CO yields, auxiliary fuel in air sizing, and medical-waste ash hazard (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=4229&amp;oldid=prev"/>
		<updated>2026-11-08T00:19:54Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Source audit: clarify compartment-fire CO yields, auxiliary fuel in air sizing, and medical-waste ash hazard (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 01:19, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l32&quot;&gt;Line 32:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 32:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Gore Willse (2008a) describes complete, or stoichiometric, combustion as the state in which all of the fuel is oxidised by the air supplied. Air left over is excess air, and practical burners run with some of it. Primary air enters with the fuel, and secondary air is supplied to the combustion zone.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-9.&amp;lt;/ref&amp;gt; [[Incomplete combustion]] can produce hazardous [[Carbon monoxide|carbon monoxide]] and usually results from too little air, poor mixing or a temperature too low to sustain combustion.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot; /&amp;gt; Boiler designers summarise the requirements as the three Ts of combustion: time, temperature and turbulence.&amp;lt;ref name=&amp;quot;Mattern-10-92&amp;quot;&amp;gt;Mattern et al. (2008), p. 10-92.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Gore Willse (2008a) describes complete, or stoichiometric, combustion as the state in which all of the fuel is oxidised by the air supplied. Air left over is excess air, and practical burners run with some of it. Primary air enters with the fuel, and secondary air is supplied to the combustion zone.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-9.&amp;lt;/ref&amp;gt; [[Incomplete combustion]] can produce hazardous [[Carbon monoxide|carbon monoxide]] and usually results from too little air, poor mixing or a temperature too low to sustain combustion.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot; /&amp;gt; Boiler designers summarise the requirements as the three Ts of combustion: time, temperature and turbulence.&amp;lt;ref name=&amp;quot;Mattern-10-92&amp;quot;&amp;gt;Mattern et al. (2008), p. 10-92.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The [[Equivalence ratio|equivalence ratio]] is the actual fuel-to-air mass ratio divided by the stoichiometric one. Values below 1 mean a fuel-lean, well-ventilated fire, and values above 1 a fuel-rich fire that favours carbon monoxide.&amp;lt;ref name=&quot;GannBryner-6-13&quot;&amp;gt;Gann and Bryner (2008), p. 6-13.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Below about 0.5 &lt;/del&gt;the carbon monoxide yield is typically less than 0.01&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, and above &lt;/del&gt;about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;1&lt;/del&gt;.5 &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;it &lt;/del&gt;levels off at about 0.2 kg per kilogram of fuel.&amp;lt;ref name=&quot;GannBryner-6-13&quot; /&amp;gt; An oxygen-deficient primary chamber thus works on the fuel-rich side, and the secondary chamber with excess air burns out its smoke and volatile gases.&amp;lt;ref name=&quot;Doucet-11-6&quot; /&amp;gt; Halogenated plastics also release acid gases: [[Hydrogen chloride|hydrogen chloride]] forms during pyrolysis even without flaming and is released from PVC at about 225 to 275 °C.&amp;lt;ref name=&quot;GannBryner-6-13&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The [[Equivalence ratio|equivalence ratio]] is the actual fuel-to-air mass ratio divided by the stoichiometric one. Values below 1 mean a fuel-lean, well-ventilated fire, and values above 1 a fuel-rich fire that favours carbon monoxide.&amp;lt;ref name=&quot;GannBryner-6-13&quot;&amp;gt;Gann and Bryner (2008), p. 6-13.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;In &lt;/ins&gt;the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;compartment-fire studies summarised by Gann and Bryner, &lt;/ins&gt;carbon monoxide yield is typically less than 0.01 &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;below an equivalence ratio of &lt;/ins&gt;about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0&lt;/ins&gt;.5&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. It &lt;/ins&gt;levels off at about 0.2 kg per kilogram of fuel &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;above about 1.5. These are not incinerator emission factors&lt;/ins&gt;.&amp;lt;ref name=&quot;GannBryner-6-13&quot; /&amp;gt; An oxygen-deficient primary chamber thus works on the fuel-rich side, and the secondary chamber with excess air burns out its smoke and volatile gases.&amp;lt;ref name=&quot;Doucet-11-6&quot; /&amp;gt; Halogenated plastics also release acid gases: [[Hydrogen chloride|hydrogen chloride]] forms during pyrolysis even without flaming and is released from PVC at about 225 to 275 °C.&amp;lt;ref name=&quot;GannBryner-6-13&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire and explosion hazards ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Fire and explosion hazards ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l106&quot;&gt;Line 106:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 106:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&quot;Doucet-11-9&quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&#039;&#039;T&#039;&#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&quot;VR-3.2&quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;The &lt;/del&gt;louver &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;then &lt;/del&gt;needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area.&amp;lt;ref name=&quot;Doucet-11-10&quot; /&amp;gt;&amp;lt;ref name=&quot;Drysdale-1-93&quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&quot;Doucet-11-7&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&quot;Doucet-11-9&quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&#039;&#039;T&#039;&#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&quot;VR-3.2&quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;On this assumption, without auxiliary fuel input, the &lt;/ins&gt;louver needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;; actual sizing must use total heat input, including auxiliary burners&lt;/ins&gt;.&amp;lt;ref name=&quot;Doucet-11-10&quot; /&amp;gt;&amp;lt;ref name=&quot;Drysdale-1-93&quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&quot;Doucet-11-7&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Applications and fire experience ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Applications and fire experience ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Severson (2008) &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;states that &lt;/del&gt;incineration &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;is &lt;/del&gt;the preferred treatment for AIDS-contaminated and combustible infectious waste, reducing &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;its &lt;/del&gt;volume by up to 95 % and &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;rendering it harmless&lt;/del&gt;.&amp;lt;ref name=&quot;Severson-7-64&quot;&amp;gt;Severson (2008), p. 7-64.&amp;lt;/ref&amp;gt; Industrial plants incinerate [[Hazardous waste|hazardous waste]] and waste solvents, using an auxiliary gas or oil burner to hold the destruction temperature and usually a scrubber for acid gases.&amp;lt;ref name=&quot;Severson-7-66&quot;&amp;gt;Severson (2008), p. 7-66.&amp;lt;/ref&amp;gt; Davenport (2008) notes that US standards for hazardous waste require incinerators to achieve 99.9 % destruction efficiency.&amp;lt;ref name=&quot;Davenport-7-55&quot;&amp;gt;Davenport (2008), p. 7-55.&amp;lt;/ref&amp;gt; Waste with halogenated aromatic compounds needs at least 1204 °C (2200 °F).&amp;lt;ref name=&quot;Doucet-11-22&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Severson (2008) &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;describes &lt;/ins&gt;incineration &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;as &lt;/ins&gt;the preferred treatment for AIDS-contaminated and combustible infectious waste, reducing &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;the &lt;/ins&gt;volume &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for disposal &lt;/ins&gt;by up to 95 % and &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;removing its infectious hazard when properly operated&lt;/ins&gt;.&amp;lt;ref name=&quot;Severson-7-64&quot;&amp;gt;Severson (2008), p. 7-64&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.&amp;lt;/ref&amp;gt; The residual ash can still require hazardous-waste disposal.&amp;lt;ref name=&quot;Doucet-11-23&quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-23&lt;/ins&gt;.&amp;lt;/ref&amp;gt; Industrial plants incinerate [[Hazardous waste|hazardous waste]] and waste solvents, using an auxiliary gas or oil burner to hold the destruction temperature and usually a scrubber for acid gases.&amp;lt;ref name=&quot;Severson-7-66&quot;&amp;gt;Severson (2008), p. 7-66.&amp;lt;/ref&amp;gt; Davenport (2008) notes that US standards for hazardous waste require incinerators to achieve 99.9 % destruction efficiency.&amp;lt;ref name=&quot;Davenport-7-55&quot;&amp;gt;Davenport (2008), p. 7-55.&amp;lt;/ref&amp;gt; Waste with halogenated aromatic compounds needs at least 1204 °C (2200 °F).&amp;lt;ref name=&quot;Doucet-11-22&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Wastewater treatment plants burn sludge mostly in multiple-hearth or fluid-bed units, and the ash can be toxic.&amp;lt;ref name=&amp;quot;Wheeler-9-148&amp;quot; /&amp;gt; Municipal solid waste is burned either with little processing, in mass burn plants, or after processing into refuse-derived fuel.&amp;lt;ref name=&amp;quot;Dungan-7-11&amp;quot;&amp;gt;Dungan (2008b), p. 7-11.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot;&amp;gt;Dungan (2008b), p. 7-12.&amp;lt;/ref&amp;gt; Shredders that prepare such fuel can explode, usually from dust ignited by tramp metal.&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Wastewater treatment plants burn sludge mostly in multiple-hearth or fluid-bed units, and the ash can be toxic.&amp;lt;ref name=&amp;quot;Wheeler-9-148&amp;quot; /&amp;gt; Municipal solid waste is burned either with little processing, in mass burn plants, or after processing into refuse-derived fuel.&amp;lt;ref name=&amp;quot;Dungan-7-11&amp;quot;&amp;gt;Dungan (2008b), p. 7-11.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot;&amp;gt;Dungan (2008b), p. 7-12.&amp;lt;/ref&amp;gt; Shredders that prepare such fuel can explode, usually from dust ignited by tramp metal.&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l120&quot;&gt;Line 120:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 120:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Some older gravity [[Waste chute|waste chute]] systems discharged straight into an incinerator, and some chutes even served as its chimney. Under NFPA 82 as summarised in 2008, chutes may not discharge directly into an incinerator, and automatic transfer from a chute terminal room is not recommended.&amp;lt;ref name=&amp;quot;Doucet-11-5&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-5.&amp;lt;/ref&amp;gt; Outdoor rubbish should be kept at least 15 m (50 ft) from ignition sources such as incinerators.&amp;lt;ref name=&amp;quot;Mattern-11-36&amp;quot;&amp;gt;Mattern (2008b), p. 11-36.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Mattern-11-37&amp;quot;&amp;gt;Mattern (2008b), p. 11-37.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Some older gravity [[Waste chute|waste chute]] systems discharged straight into an incinerator, and some chutes even served as its chimney. Under NFPA 82 as summarised in 2008, chutes may not discharge directly into an incinerator, and automatic transfer from a chute terminal room is not recommended.&amp;lt;ref name=&amp;quot;Doucet-11-5&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-5.&amp;lt;/ref&amp;gt; Outdoor rubbish should be kept at least 15 m (50 ft) from ignition sources such as incinerators.&amp;lt;ref name=&amp;quot;Mattern-11-36&amp;quot;&amp;gt;Mattern (2008b), p. 11-36.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Mattern-11-37&amp;quot;&amp;gt;Mattern (2008b), p. 11-37.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Incineration does not make every waste harmless. Only organic constituents are destroyed by combustion or pyrolysis.&amp;lt;ref name=&quot;Doucet-11-19&quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-19.&amp;lt;/ref&amp;gt; Ash and scrubber sludge must be disposed of off site, ash may need testing for heavy metals, and hazardous residues go to a permitted facility.&amp;lt;ref name=&quot;Doucet-11-23&quot;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt;Doucet and Gilyeat (2008), p. 11-23.&amp;lt;&lt;/del&gt;/&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;ref&lt;/del&gt;&amp;gt; Catalytic units cannot oxidise silicones, chlorine compounds or metallic fumes such as tin, mercury and zinc.&amp;lt;ref name=&quot;Ostrowski-8-85&quot;&amp;gt;Ostrowski (2008a), p. 8-85.&amp;lt;/ref&amp;gt; No single chimney lining material suits all operating conditions and waste types.&amp;lt;ref name=&quot;Doucet-11-9&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Incineration does not make every waste harmless. Only organic constituents are destroyed by combustion or pyrolysis.&amp;lt;ref name=&quot;Doucet-11-19&quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-19.&amp;lt;/ref&amp;gt; Ash and scrubber sludge must be disposed of off site, ash may need testing for heavy metals, and hazardous residues go to a permitted facility.&amp;lt;ref name=&quot;Doucet-11-23&quot; /&amp;gt; Catalytic units cannot oxidise silicones, chlorine compounds or metallic fumes such as tin, mercury and zinc.&amp;lt;ref name=&quot;Ostrowski-8-85&quot;&amp;gt;Ostrowski (2008a), p. 8-85.&amp;lt;/ref&amp;gt; No single chimney lining material suits all operating conditions and waste types.&amp;lt;ref name=&quot;Doucet-11-9&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The requirements above are US practice as summarised in the 20th edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; (2008), which does not name the NFPA 82 edition. They are not universal and may differ from current editions and from rules in other countries. The chapter adds that state and local regulations in the United States may be more stringent than federal regulations or standards.&amp;lt;ref name=&amp;quot;Doucet-11-25&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-25.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The requirements above are US practice as summarised in the 20th edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; (2008), which does not name the NFPA 82 edition. They are not universal and may differ from current editions and from rules in other countries. The chapter adds that state and local regulations in the United States may be more stringent than federal regulations or standards.&amp;lt;ref name=&amp;quot;Doucet-11-25&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-25.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3065:rev-4229:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=3065&amp;oldid=prev</id>
		<title>Mark: New FSE wiki article: Incinerator (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Incinerator&amp;diff=3065&amp;oldid=prev"/>
		<updated>2026-11-07T21:07:17Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Incinerator (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;An &amp;#039;&amp;#039;&amp;#039;incinerator&amp;#039;&amp;#039;&amp;#039; is an engineered furnace that treats and disposes of waste by high-temperature combustion.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-6.&amp;lt;/ref&amp;gt; Properly designed and operated systems can reduce the weight and volume of most municipal, commercial and institutional solid waste by as much as 95 %. Incinerators destroy pathological and biomedical waste at hospitals and research facilities, as well as hazardous and toxic industrial waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Larger [[Wastewater treatment plant|wastewater treatment plants]] often incinerate their sewage sludge.&amp;lt;ref name=&amp;quot;Wheeler-9-148&amp;quot;&amp;gt;Wheeler (2008), p. 9-148.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For fire safety the process cuts both ways. Prompt destruction reduces the amount of combustible waste stored in a building, but an incinerator room brings together stored waste, flames, hot flue gases, hot ash and an auxiliary fuel supply.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; In the United States the installation is governed largely by NFPA 82, &amp;#039;&amp;#039;Standard on Incinerators and Waste and Linen Handling Systems and Equipment&amp;#039;&amp;#039;. The 20th edition of the NFPA &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; (2008) summarises its provisions for waste charging, ash removal, chimneys and air supply.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-8.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-9.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-10.&amp;lt;/ref&amp;gt; Among the main design variables are temperature, residence time, turbulence and the air supply, which typically amounts to 10 to 20 kg of air per kilogram of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-20&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-20.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Definition and types ==&lt;br /&gt;
Doucet and Gilyeat (2008) define incineration as an engineered process that uses high-temperature combustion for the treatment and disposal of waste. Older incinerators were little more than single-chamber fireboxes with uncontrolled burning, notorious for smoke and odour. The handbook states that properly designed, constructed and operated modern systems can be completely fire safe.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Three basic types are used for solid waste in industrial, institutional and commercial facilities.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A multiple-chamber incinerator has a primary chamber, in which the waste burns out, and one or more secondary chambers, in which combustibles carried in the flue gas are burned. It runs with 200 to 300 % excess air and is now used almost only for pathological waste such as animal carcasses.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; A controlled-air incinerator works in two stages. Waste in the primary chamber burns under starved-air, or oxygen-deficient, conditions, and the smoke and volatile gases then burn in a secondary chamber with 100 to 200 % excess air. Most solid waste incinerators built in the 30 to 40 years before 2008 were of this type.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A rotary kiln is an inclined cylindrical chamber that turns slowly on its axis. The rotation tumbles the waste and moves the ash to the discharge end, and a separate secondary chamber burns the flue gas combustibles.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Kilns accept solids, sludges, liquids and fumes and are used mainly for hazardous and mixed waste.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-21.&amp;lt;/ref&amp;gt; In a multiple-hearth incinerator, used almost only for sludge, rotating rabble arms push the sludge across a vertical stack of refractory hearths. A fluidised-bed incinerator injects the waste into a hot bed of sand that a high-pressure blower keeps in suspension.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Liquid injection incinerators burn atomised liquid waste in suspension, and gaseous waste is burned in flares, thermal burners or catalytic burners.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-22&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-22.&amp;lt;/ref&amp;gt; Industrial vapour incinerators, which include direct-flame afterburners and catalytic units, destroy process exhaust vapours, for example from ovens.&amp;lt;ref name=&amp;quot;Ostrowski-8-84&amp;quot;&amp;gt;Ostrowski (2008a), p. 8-84.&amp;lt;/ref&amp;gt; Table 1 gives the operating ranges listed in the handbook for the main industrial types.&amp;lt;ref name=&amp;quot;Doucet-11-21&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Table 1. Industrial waste incinerators (Doucet and Gilyeat, 2008, p. 11-21)&lt;br /&gt;
! Type !! Typical waste !! Combustion temperature !! Residence time&lt;br /&gt;
|-&lt;br /&gt;
| Rotary kiln || Most organic wastes; solids and sludges, also liquids and gases || 815–1650 °C (1500–3000 °F) || Several seconds to several hours&lt;br /&gt;
|-&lt;br /&gt;
| Multiple hearth || Most organic wastes, largely sewage sludge || 760–980 °C (1400–1800 °F) || Up to several hours&lt;br /&gt;
|-&lt;br /&gt;
| Liquid injection || Pumpable liquids and slurries only || 650–1650 °C (1200–3000 °F) || 0.1–1.0 s&lt;br /&gt;
|-&lt;br /&gt;
| Fluidised bed || Most organic wastes; ideal for liquids || 760–870 °C (1400–1600 °F) || Seconds for gases and liquids, longer for solids&lt;br /&gt;
|-&lt;br /&gt;
| Pyrolysis || Mainly as fuel; solids and sludges || 480–815 °C (900–1500 °F) || Normally 12–15 min&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Combustion in an incinerator ==&lt;br /&gt;
[[Pyrolysis]] is the decomposition of a material by heating, in which large molecules break down into smaller ones and release combustible gases. It needs no oxygen, but the combustion of those gases does.&amp;lt;ref name=&amp;quot;VR-3.1&amp;quot;&amp;gt;Van Rossum (2027), §3.1.&amp;lt;/ref&amp;gt; Solid waste therefore burns in two steps: the solid decomposes, and the released gases burn in the flames.&amp;lt;ref name=&amp;quot;VR-4.1&amp;quot;&amp;gt;Van Rossum (2027), §4.1.&amp;lt;/ref&amp;gt; A pyrolysis unit heats waste without oxygen, distils off the volatiles and leaves ash and char, and the volatiles are burned in a separate chamber with excess air.&amp;lt;ref name=&amp;quot;Doucet-11-20&amp;quot; /&amp;gt; Controlled-air incinerators, with their starved-air primary chamber, are also called pyrolytic incinerators.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Gore Willse (2008a) describes complete, or stoichiometric, combustion as the state in which all of the fuel is oxidised by the air supplied. Air left over is excess air, and practical burners run with some of it. Primary air enters with the fuel, and secondary air is supplied to the combustion zone.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-9.&amp;lt;/ref&amp;gt; [[Incomplete combustion]] can produce hazardous [[Carbon monoxide|carbon monoxide]] and usually results from too little air, poor mixing or a temperature too low to sustain combustion.&amp;lt;ref name=&amp;quot;GoreWillse-10-9&amp;quot; /&amp;gt; Boiler designers summarise the requirements as the three Ts of combustion: time, temperature and turbulence.&amp;lt;ref name=&amp;quot;Mattern-10-92&amp;quot;&amp;gt;Mattern et al. (2008), p. 10-92.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The [[Equivalence ratio|equivalence ratio]] is the actual fuel-to-air mass ratio divided by the stoichiometric one. Values below 1 mean a fuel-lean, well-ventilated fire, and values above 1 a fuel-rich fire that favours carbon monoxide.&amp;lt;ref name=&amp;quot;GannBryner-6-13&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-13.&amp;lt;/ref&amp;gt; Below about 0.5 the carbon monoxide yield is typically less than 0.01, and above about 1.5 it levels off at about 0.2 kg per kilogram of fuel.&amp;lt;ref name=&amp;quot;GannBryner-6-13&amp;quot; /&amp;gt; An oxygen-deficient primary chamber thus works on the fuel-rich side, and the secondary chamber with excess air burns out its smoke and volatile gases.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Halogenated plastics also release acid gases: [[Hydrogen chloride|hydrogen chloride]] forms during pyrolysis even without flaming and is released from PVC at about 225 to 275 °C.&amp;lt;ref name=&amp;quot;GannBryner-6-13&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Fire and explosion hazards ==&lt;br /&gt;
Doucet and Gilyeat (2008) list the hazards inherent in incineration. They are combustible, sometimes highly volatile waste; high-temperature flaming combustion; ducting of hot gases; hot ash; and the fuel and combustion systems. Safety therefore depends on layout, waste flow patterns, operation and maintenance as well as on sprinklers and fire-rated rooms.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The equipment works under severe conditions: widely fluctuating temperatures, thermal shock from wet waste, slagging and spalling of the refractory, acid attack and abrasion.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt; Explosions inside the chambers can be caused by aerosol cans, and Mattern (2008b) adds mercury batteries and other pressurised containers.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Mattern-11-34&amp;quot;&amp;gt;Mattern (2008b), p. 11-34.&amp;lt;/ref&amp;gt; Cracks or distortions could let flames and hot gases escape into the building, so the units must be built to resist these conditions.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-7.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Severson (2008) lists the principal operating hazards. These are overheating from feeding much volatile material or waste with a higher heat of combustion, structural failure from overheating or corrosion, and acid corrosion or failure of the scrubber.&amp;lt;ref name=&amp;quot;Severson-7-63&amp;quot;&amp;gt;Severson (2008), p. 7-63.&amp;lt;/ref&amp;gt; Burning a flammable solvent in a waste mixture might also release a toxic pesticide, or its combustion products, to the atmosphere.&amp;lt;ref name=&amp;quot;Severson-7-62&amp;quot;&amp;gt;Severson (2008), p. 7-62.&amp;lt;/ref&amp;gt; Vapour incinerators have been damaged by fires in the ducts between the process and the incinerator, by explosions of vapours accumulated before or during start-up and by overheating. Causes included poor duct cleaning, incomplete prepurging, operator error and faulty controls.&amp;lt;ref name=&amp;quot;Ostrowski-8-84&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Ash remains a hazard after it leaves the furnace. Hot ash with partly burned items can ignite when exposed to room air during cleanout, and quenched residues in ash carts may still ignite spontaneously when disturbed.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; [[Smouldering]] in a fuel layer becomes nearly steady when air is forced through it, a configuration that Ohlemiller (2002) notes in some incinerators and coal burners.&amp;lt;ref name=&amp;quot;Ohlemiller-2-202&amp;quot;&amp;gt;Ohlemiller (2002), p. 2-202.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Design and installation requirements ==&lt;br /&gt;
Casings normally accessible to personnel must be insulated or shielded so that their surface does not exceed 71 °C (160 °F).&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt; Metal handles of operating doors may rise by no more than 22 K (40 °F), and non-metallic handles by no more than 33 K (60 °F). Each incinerator needs an explosion-relief door or panel with an effective area of 0.0929 m² per 2.83 m³ (1 ft² per 100 ft³) of primary chamber volume.&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt; All parts, including chambers, breechings and ash areas, must be accessible for inspection and repair.&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Clearance to combustibles|Clearances to combustible materials]] keep exposed combustibles below dangerous temperatures and were set by testing laboratories and field experience.&amp;lt;ref name=&amp;quot;GoreWillse-10-28&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-28.&amp;lt;/ref&amp;gt; Table 2 gives the standard clearances for incinerators, which apply unless a listed appliance shows otherwise.&amp;lt;ref name=&amp;quot;GoreWillse-10-29&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-29.&amp;lt;/ref&amp;gt; For brick-encased commercial units, the clearance above may be reduced to 914 mm (36 in.) and those at the sides and rear to 457 mm (18 in.). Domestic units need at least 1219 mm (48 in.) above the charging door.&amp;lt;ref name=&amp;quot;GoreWillse-10-30&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-30.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Table 2. Standard clearances from incinerators to combustible material (Gore Willse, 2008a, pp. 10-29–10-30)&lt;br /&gt;
! Incinerator !! Above top !! From front !! From back !! From sides&lt;br /&gt;
|-&lt;br /&gt;
| Domestic type || 914 mm (36 in.) || 1219 mm (48 in.) || 914 mm (36 in.) || 914 mm (36 in.)&lt;br /&gt;
|-&lt;br /&gt;
| Commercial-industrial, all sizes || 1220 mm (48 in.) || 2440 mm (96 in.) || 910 mm (36 in.) || 910 mm (36 in.)&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Incinerators and their waste and residue handling systems must be placed in a separate fire-rated room with fire-rated opening protectives, which may also house the building heating equipment.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt; Kampmeyer (2008) notes that incinerator rooms are often separated by 2 hour rated construction.&amp;lt;ref name=&amp;quot;Kampmeyer-18-74&amp;quot;&amp;gt;Kampmeyer (2008), p. 18-74.&amp;lt;/ref&amp;gt; In New York City, both the 1968 and the 2003 building codes required Class A or B interior finish in incinerator combustion rooms. This is a flame spread rating of 0 to 75 as defined in ASTM E84.&amp;lt;ref name=&amp;quot;RazzaGrill-24&amp;quot;&amp;gt;Razza and Grill (2005c), p. 24.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Chimneys and breechings must follow NFPA 82 and NFPA 211. Those for hot flue gases should be refractory-lined and insulated, and those for the wet gases downstream of a scrubber must resist acidic corrosion.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; An incinerator chimney may serve no other purpose, and it may be connected to a boiler chimney only if it is built and controlled for both services.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Spark arresters are required on incinerators, typically wire mesh with openings of about 13 mm (½ in.).&amp;lt;ref name=&amp;quot;GoreWillse-10-50&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-50.&amp;lt;/ref&amp;gt; Draft hoods, a standard feature in [[Gas appliance venting|gas appliance venting]], are not required on incinerators.&amp;lt;ref name=&amp;quot;GoreWillse-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Most incinerators fire [[Natural gas|natural gas]] or distillate fuel oil in auxiliary burners. These provide ignition, warm-up and temperature control and should have automatic ignition and flame safeguards.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Wiring within about 0.3 m (1 ft) of a casing should have high-temperature insulation, and control panels should be at least about 0.9 m (3 ft) away.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt; Confined incinerator rooms need an air-supply louver or blower for combustion air and for ventilation air that removes heat radiated from the casings.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt; In health care buildings this air should be taken from, and discharged to, the outside.&amp;lt;ref name=&amp;quot;OConnor-20-152&amp;quot;&amp;gt;O&amp;#039;Connor (2008), p. 20-152.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Waste charging and ash removal ==&lt;br /&gt;
Charging has a particularly high fire hazard potential, because loading opens a direct path between flaming combustion and the building.&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt; Manual loading through a charging door has mostly been used on small and batch-loaded units, and many US states no longer accept it because of air pollution.&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Where it is allowed, the opening should be at least 610 mm × 610 mm (24 × 24 in.), the door should latch positively, and an interlock should stop the primary burners when it opens.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Mechanical loaders are almost always used above about 136 kg/h (300 lb/h). NFPA 82 requires charging controls that prevent flames, combustion gases and heat from escaping during loading, which in effect calls for a mechanical loader unless the unit is batch-loaded.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; In a hopper and ram loader, the hopper cover closes, the fire door opens, a ram pushes the waste in and withdraws, and the fire door closes before the cover reopens. Because one door is always shut, the loader works as an airlock.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Two faults need attention. Waste lodged under the fire door can stop it closing, ignite and spread fire back into the hopper, so the door should be closed by power, not gravity. The hot ram face can also pick up melting plastic bags and carry burning material back, so the ram should be water-cooled or quenched after every stroke.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt; Recommended extras are a flame scanner, a high-temperature sprinkler over the hopper independent of the room [[Sprinkler system|sprinkler system]], and an emergency switch that injects the hopper contents at once.&amp;lt;ref name=&amp;quot;Doucet-11-8&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Almost all incinerators burning more than about 454 kg/h (1000 lb/h) have automatic or semiautomatic ash removal.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Water should not be sprayed into the furnace to quench ash, because thermal shock damages the refractory. NFPA 82 requires the ash removed during cleanout to be quenched or contained, for example by water sprays, a wet quench pit or a special enclosure.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Ash carts should be stored in a fire-rated area away from waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Air supply and explosion relief calculations ==&lt;br /&gt;
The stoichiometric air requirement is the mass of air needed to burn one kilogram of fuel completely. Drysdale (2002) shows that the heat released per gram of air consumed is roughly constant, about 3 kJ/g, for most fuels.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot;&amp;gt;Drysdale (2002), p. 1-93.&amp;lt;/ref&amp;gt; Dividing the [[Heat of combustion|heat of combustion]] by this value gives the stoichiometric air-to-fuel ratio. The excess air and the equivalence ratio follow from the air actually supplied, while the relief and louver areas grow in proportion to chamber volume and total heat input:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;r_{st} = \frac{\Delta H_c}{\Delta H_{c,\mathrm{air}}} \qquad EA = \frac{r_a}{r_{st}} - 1 \qquad \phi = \frac{r_{st}}{r_a}&amp;lt;/math&amp;gt;&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;A_{v} = 0.0328 \, V_{p} \qquad A_{l} = 550 \, \dot{Q}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;r_{st}&amp;lt;/math&amp;gt; || Stoichiometric air-to-fuel mass ratio || kg air/kg fuel&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;r_a&amp;lt;/math&amp;gt; || Air actually supplied per unit mass of waste || kg air/kg waste&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\Delta H_c&amp;lt;/math&amp;gt; || Heat of combustion of the fuel || kJ/g&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\Delta H_{c,\mathrm{air}}&amp;lt;/math&amp;gt; || Heat released per unit mass of air consumed || kJ/g&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;EA&amp;lt;/math&amp;gt; || Excess air (multiply by 100 for per cent) || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\phi&amp;lt;/math&amp;gt; || Equivalence ratio || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;A_v&amp;lt;/math&amp;gt; || Effective area of the explosion-relief door or panel || m²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;V_p&amp;lt;/math&amp;gt; || Volume of the primary combustion chamber || m³&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;A_l&amp;lt;/math&amp;gt; || Free area of the outside-air louver || mm²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\dot{Q}&amp;lt;/math&amp;gt; || Total heat input || kW&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The constant 0.0328 m²/m³ is the handbook rule of 0.0929 m² per 2.83 m³. The constant 550 mm²/kW converts the louver rule of 1 in.² of free area per 4000 Btu/h, or 645 mm² per 1.17 kW.&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt; The heat released per unit mass of air is not constant for every fuel: carbon monoxide (4.10 kJ/g) and ethyne (3.65 kJ/g) are clear exceptions.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For most combustible materials the stoichiometric ratio lies between 3 and 16 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Janssens-3-44&amp;quot;&amp;gt;Janssens (2002), p. 3-44.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For cellulose, with 16.09 kJ/g and 3.15 kJ per gram of air, the stoichiometric ratio is 16.09 / 3.15 = 5.1 kg of air per kilogram.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; gives a similar result: about 1.25 kg of oxygen per kilogram of cellulosic fuel, divided by 0.232 kg of oxygen per kilogram of dry air, is 5.4 kg of air.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Janssens-3-46&amp;quot;&amp;gt;Janssens (2002), p. 3-46.&amp;lt;/ref&amp;gt; Polyethylene needs 43.28 / 2.93 = 14.8 kg.&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; The handbook&amp;#039;s 10 to 20 kg of air per kilogram therefore means about 96 to 290 % excess air for cellulose-like waste, or an equivalence ratio of 0.51 to 0.26. This is the same order as the excess air quoted for the incinerator types.&amp;lt;ref name=&amp;quot;Doucet-11-6&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; Moisture and ash in real waste lower the demand and plastics raise it, so the result is a check, not a design value.&lt;br /&gt;
&lt;br /&gt;
As a worked example, take an incinerator burning 454 kg/h (1000 lb/h) of waste.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt; At 10 to 20 kg of air per kilogram, it needs 4540 to 9070 kg/h, or 1.26 to 2.52 kg/s, of combustion air. With an air density of 353/&amp;#039;&amp;#039;T&amp;#039;&amp;#039;, about 1.2 kg/m³ at 20 °C, this is 1.05 to 2.09 m³/s.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt; Estimating the heat input with dry cellulose gives 454/3600 × 16.09 MJ/kg ≈ 2030 kW. The louver then needs 550 × 2030 ≈ 1,120,000 mm², rounded up to 1.2 m² of free area.&amp;lt;ref name=&amp;quot;Doucet-11-10&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Drysdale-1-93&amp;quot; /&amp;gt; For an assumed primary chamber of 3.0 m³, the relief area is 0.0328 × 3.0 = 0.098 m², rounded up to 0.10 m².&amp;lt;ref name=&amp;quot;Doucet-11-7&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Applications and fire experience ==&lt;br /&gt;
Severson (2008) states that incineration is the preferred treatment for AIDS-contaminated and combustible infectious waste, reducing its volume by up to 95 % and rendering it harmless.&amp;lt;ref name=&amp;quot;Severson-7-64&amp;quot;&amp;gt;Severson (2008), p. 7-64.&amp;lt;/ref&amp;gt; Industrial plants incinerate [[Hazardous waste|hazardous waste]] and waste solvents, using an auxiliary gas or oil burner to hold the destruction temperature and usually a scrubber for acid gases.&amp;lt;ref name=&amp;quot;Severson-7-66&amp;quot;&amp;gt;Severson (2008), p. 7-66.&amp;lt;/ref&amp;gt; Davenport (2008) notes that US standards for hazardous waste require incinerators to achieve 99.9 % destruction efficiency.&amp;lt;ref name=&amp;quot;Davenport-7-55&amp;quot;&amp;gt;Davenport (2008), p. 7-55.&amp;lt;/ref&amp;gt; Waste with halogenated aromatic compounds needs at least 1204 °C (2200 °F).&amp;lt;ref name=&amp;quot;Doucet-11-22&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Wastewater treatment plants burn sludge mostly in multiple-hearth or fluid-bed units, and the ash can be toxic.&amp;lt;ref name=&amp;quot;Wheeler-9-148&amp;quot; /&amp;gt; Municipal solid waste is burned either with little processing, in mass burn plants, or after processing into refuse-derived fuel.&amp;lt;ref name=&amp;quot;Dungan-7-11&amp;quot;&amp;gt;Dungan (2008b), p. 7-11.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot;&amp;gt;Dungan (2008b), p. 7-12.&amp;lt;/ref&amp;gt; Shredders that prepare such fuel can explode, usually from dust ignited by tramp metal.&amp;lt;ref name=&amp;quot;Dungan-7-12&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fire statistics treat most incinerator fires as confined fires. In the US National Fire Incident Reporting System (NFIRS) version 5.0, incident type 115 covers incinerator overload or malfunction. Confined fires are small, generally stay within a noncombustible container and allow abbreviated reporting.&amp;lt;ref name=&amp;quot;Ahrens-3-66&amp;quot;&amp;gt;Ahrens et al. (2008), p. 3-66.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Ahrens-3-67&amp;quot;&amp;gt;Ahrens et al. (2008), p. 3-67.&amp;lt;/ref&amp;gt; The reported number rose from 8 in 1999 to 492 in 2003, about 0.2 % of reported structure fires. These are raw counts that grew as departments adopted version 5.0, not national estimates.&amp;lt;ref name=&amp;quot;Ahrens-3-77&amp;quot;&amp;gt;Ahrens et al. (2008), p. 3-77.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
National estimates for US industrial and manufacturing properties in 1999 to 2002 give about 100 confined incinerator fires a year, 1 % of all fires in these properties.&amp;lt;ref name=&amp;quot;Demers-20-207&amp;quot;&amp;gt;Demers (2008a), p. 20-207.&amp;lt;/ref&amp;gt; These caused no civilian deaths, 3 civilian injuries and about US$2 million in direct damage. The values are projections from fires reported to municipal fire departments, so fires handled only by industrial fire brigades are excluded.&amp;lt;ref name=&amp;quot;Demers-20-207&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limits and misconceptions ==&lt;br /&gt;
Some older gravity [[Waste chute|waste chute]] systems discharged straight into an incinerator, and some chutes even served as its chimney. Under NFPA 82 as summarised in 2008, chutes may not discharge directly into an incinerator, and automatic transfer from a chute terminal room is not recommended.&amp;lt;ref name=&amp;quot;Doucet-11-5&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-5.&amp;lt;/ref&amp;gt; Outdoor rubbish should be kept at least 15 m (50 ft) from ignition sources such as incinerators.&amp;lt;ref name=&amp;quot;Mattern-11-36&amp;quot;&amp;gt;Mattern (2008b), p. 11-36.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Mattern-11-37&amp;quot;&amp;gt;Mattern (2008b), p. 11-37.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Incineration does not make every waste harmless. Only organic constituents are destroyed by combustion or pyrolysis.&amp;lt;ref name=&amp;quot;Doucet-11-19&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-19.&amp;lt;/ref&amp;gt; Ash and scrubber sludge must be disposed of off site, ash may need testing for heavy metals, and hazardous residues go to a permitted facility.&amp;lt;ref name=&amp;quot;Doucet-11-23&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-23.&amp;lt;/ref&amp;gt; Catalytic units cannot oxidise silicones, chlorine compounds or metallic fumes such as tin, mercury and zinc.&amp;lt;ref name=&amp;quot;Ostrowski-8-85&amp;quot;&amp;gt;Ostrowski (2008a), p. 8-85.&amp;lt;/ref&amp;gt; No single chimney lining material suits all operating conditions and waste types.&amp;lt;ref name=&amp;quot;Doucet-11-9&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The requirements above are US practice as summarised in the 20th edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; (2008), which does not name the NFPA 82 edition. They are not universal and may differ from current editions and from rules in other countries. The chapter adds that state and local regulations in the United States may be more stringent than federal regulations or standards.&amp;lt;ref name=&amp;quot;Doucet-11-25&amp;quot;&amp;gt;Doucet and Gilyeat (2008), p. 11-25.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Chimney fire]]&lt;br /&gt;
* [[Fuel oil system]]&lt;br /&gt;
* [[HVAC system fire protection]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Ahrens, M., Frazier, P., &amp;amp; Kelch, G. (2008). Use of fire incident data and statistics. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 3-61–3-92). National Fire Protection Association.&lt;br /&gt;
* Davenport, J. A. (2008). Storage and handling of chemicals. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-43–7-55). National Fire Protection Association.&lt;br /&gt;
* Demers, D. P. (2008a). Industrial occupancies. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 20-203–20-210). National Fire Protection Association.&lt;br /&gt;
* Doucet, L. G., &amp;amp; Gilyeat, S. S. (2008). Waste handling and control. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 11-3–11-25). National Fire Protection Association.&lt;br /&gt;
* Drysdale, D. D. (2002). Thermochemistry. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-90–1-98). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Dungan, K. W. (2008b). Storage and handling of solid fuels. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-3–7-13). National Fire Protection Association.&lt;br /&gt;
* Gann, R. G., &amp;amp; Bryner, N. P. (2008). Combustion products and their effects on life safety. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-11–6-34). National Fire Protection Association.&lt;br /&gt;
* Gore Willse, P. J. (2008a). Heating systems and appliances. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 10-9–10-56). National Fire Protection Association.&lt;br /&gt;
* Janssens, M. (2002). Calorimetry. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-38–3-62). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Kampmeyer, J. E. (2008). Penetration sealing. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 18-73–18-78). National Fire Protection Association.&lt;br /&gt;
* Mattern, L. J. (2008b). Housekeeping practices. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 11-27–11-38). National Fire Protection Association.&lt;br /&gt;
* Mattern, L. J., Catania, E., &amp;amp; Ehrlich, S. (2008). Boiler furnaces. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 10-91–10-104). National Fire Protection Association.&lt;br /&gt;
* O&amp;#039;Connor, D. J. (2008). Health care occupancies. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 20-139–20-155). National Fire Protection Association.&lt;br /&gt;
* Ohlemiller, T. J. (2002). Smoldering combustion. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-200–2-210). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Ostrowski, R. (2008a). Industrial and commercial heat utilization equipment. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 8-71–8-92). National Fire Protection Association.&lt;br /&gt;
* Razza, J. C., &amp;amp; Grill, R. A. (2005c). &amp;#039;&amp;#039;Comparison of the 1968 and current (2003) New York City Building Code provisions&amp;#039;&amp;#039; (NIST NCSTAR 1-1F). National Institute of Standards and Technology.&lt;br /&gt;
* Severson, P. R. (2008). Hazardous waste control. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-57–7-69). National Fire Protection Association.&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
* Wheeler, J. F. (2008). Protection of wastewater treatment plants. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-141–9-155). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Building Services &amp;amp; Electrical]]&lt;/div&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
</feed>