<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Gas_appliance_venting</id>
	<title>Gas appliance venting - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Gas_appliance_venting"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;action=history"/>
	<updated>2026-11-21T22:40:58Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=9146&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 1 error: arithmetic (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=9146&amp;oldid=prev"/>
		<updated>2026-11-15T23:32:46Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 1 error: arithmetic (Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 00:32, 16 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l29&quot;&gt;Line 29:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 29:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|}&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;|}&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The estimate assumes gases near atmospheric pressure, air-like flue-gas density and a vent filled with gas of uniform temperature; it omits flow resistance and wind.&amp;lt;ref name=&quot;VR-3.2&quot; /&amp;gt; Draft hood appliances such as furnaces, water heaters and boilers must pass spillage tests with only 1.5 m (5 ft) of vent height. Wall furnaces need a vent outlet at least 3.7 m (12 ft) above the floor.&amp;lt;ref name=&quot;GW-10-49&quot;&amp;gt;Gore Willse (2008a), p. 10-49.&amp;lt;/ref&amp;gt; With outdoor air at 20 °C (1.20 kg/m³) and a mean vent gas temperature of 150 °C (0.83 kg/m³), a 1.5 m vent gives Δp ≈ 9.81 × 1.5 × 0.37 ≈ 5.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;5 &lt;/del&gt;Pa. A 3.7 m vent gives about 13 Pa.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The estimate assumes gases near atmospheric pressure, air-like flue-gas density and a vent filled with gas of uniform temperature; it omits flow resistance and wind.&amp;lt;ref name=&quot;VR-3.2&quot; /&amp;gt; Draft hood appliances such as furnaces, water heaters and boilers must pass spillage tests with only 1.5 m (5 ft) of vent height. Wall furnaces need a vent outlet at least 3.7 m (12 ft) above the floor.&amp;lt;ref name=&quot;GW-10-49&quot;&amp;gt;Gore Willse (2008a), p. 10-49.&amp;lt;/ref&amp;gt; With outdoor air at 20 °C (1.20 kg/m³) and a mean vent gas temperature of 150 °C (0.83 kg/m³), a 1.5 m vent gives Δp ≈ 9.81 × 1.5 × 0.37 ≈ 5.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;4 &lt;/ins&gt;Pa. A 3.7 m vent gives about 13 Pa.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-6654:rev-9146:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=6654&amp;oldid=prev</id>
		<title>Mark: Remove source references from image captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=6654&amp;oldid=prev"/>
		<updated>2026-11-13T07:29:59Z</updated>

		<summary type="html">&lt;p&gt;Remove source references from image captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:29, 13 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l32&quot;&gt;Line 32:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 32:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v3.svg|thumb|upright=1.5|alt=Line chart of natural draft in pascals against mean vent gas temperature for vent heights of 1.5 and 3.7 metres, staying below about 17 Pa|Natural draft of a vent against mean vent gas temperature, from Δp = g h (ρa − ρg) with ρ = 353/T and outdoor air at 20 °C&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Van Rossum (2027), §3.2, and Gore Willse (2008a), pp. 10-45 and 10-49&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v3.svg|thumb|upright=1.5|alt=Line chart of natural draft in pascals against mean vent gas temperature for vent heights of 1.5 and 3.7 metres, staying below about 17 Pa|Natural draft of a vent against mean vent gas temperature, from Δp = g h (ρa − ρg) with ρ = 353/T and outdoor air at 20 °C.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The draft hood protects the appliance from variations in this weak draft. It is built into the appliance or forms part of the vent connector.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt; It lets the flue gases escape readily if there is no draft, a backdraft or a blockage beyond the hood. It also prevents a backdraft from entering the appliance and neutralises the stack action of the chimney or vent.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; For gas appliances with draft hoods, chimney draft therefore has very little influence on combustion, and the chimney serves only as a conduit for the combustion products.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Draft hoods are generally required on vented appliances, except for direct-vent appliances and units with power burners or mechanical forced venting.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The draft hood protects the appliance from variations in this weak draft. It is built into the appliance or forms part of the vent connector.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt; It lets the flue gases escape readily if there is no draft, a backdraft or a blockage beyond the hood. It also prevents a backdraft from entering the appliance and neutralises the stack action of the chimney or vent.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; For gas appliances with draft hoods, chimney draft therefore has very little influence on combustion, and the chimney serves only as a conduit for the combustion products.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Draft hoods are generally required on vented appliances, except for direct-vent appliances and units with power burners or mechanical forced venting.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v1.svg|thumb|upright=1.5|alt=Section through a gas furnace with draft hood, vent connector and Type B vent rising through a roof, with flue gas, dilution air and spill paths|A natural-draft gas venting system with draft hood, vent connector and Type B vent&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Gore Willse (2008a), pp. 10-38, 10-43, 10-46 and 10-49&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v1.svg|thumb|upright=1.5|alt=Section through a gas furnace with draft hood, vent connector and Type B vent rising through a roof, with flue gas, dilution air and spill paths|A natural-draft gas venting system with draft hood, vent connector and Type B vent.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Vent types ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Vent types ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l64&quot;&gt;Line 64:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 64:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;NFPA 54 therefore defines four categories of vented gas appliances.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances operate with a nonpositive vent static pressure and a vent gas temperature that avoids excessive condensate in the vent. Category II appliances also have a nonpositive vent pressure, but a vent gas temperature that may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III appliances operate with a positive vent pressure and avoid excessive condensate, while Category IV appliances have a positive vent pressure and may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The category can be determined only in the laboratory under the relevant ANSI test standard, and it is shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;NFPA 54 therefore defines four categories of vented gas appliances.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances operate with a nonpositive vent static pressure and a vent gas temperature that avoids excessive condensate in the vent. Category II appliances also have a nonpositive vent pressure, but a vent gas temperature that may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III appliances operate with a positive vent pressure and avoid excessive condensate, while Category IV appliances have a positive vent pressure and may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The category can be determined only in the laboratory under the relevant ANSI test standard, and it is shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v2.svg|thumb|upright=1.5|alt=Two by two matrix of gas appliance venting categories I to IV by vent pressure and condensate, with the vent type each needs|The four venting categories of gas appliances in NFPA 54 and the vents they need&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Gore Willse (2008a), pp. 10-42–10-45&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v2.svg|thumb|upright=1.5|alt=Two by two matrix of gas appliance venting categories I to IV by vent pressure and condensate, with the vent type each needs|The four venting categories of gas appliances in NFPA 54 and the vents they need.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The category sets the type of vent. Categories III and IV need vents that withstand positive pressure and are sealed against leakage, while Categories I and II rely on natural draft through a vertical vent.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Categories II and IV need corrosion-resistant vents that contain and dispose of condensate, and few if any Category II appliances are on the market.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances use conventional systems, mainly Type B vents and masonry chimneys. Masonry chimneys heat up slowly and often have to be relined with aluminium or stainless steel to limit condensation.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III and IV appliances can typically vent horizontally through a side wall, with the materials, sizes and joint sealants specified by the manufacturer.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The category sets the type of vent. Categories III and IV need vents that withstand positive pressure and are sealed against leakage, while Categories I and II rely on natural draft through a vertical vent.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Categories II and IV need corrosion-resistant vents that contain and dispose of condensate, and few if any Category II appliances are on the market.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances use conventional systems, mainly Type B vents and masonry chimneys. Masonry chimneys heat up slowly and often have to be relined with aluminium or stainless steel to limit condensation.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III and IV appliances can typically vent horizontally through a side wall, with the materials, sizes and joint sealants specified by the manufacturer.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l81&quot;&gt;Line 81:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 81:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Spillage, backdrafting and carbon monoxide ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Spillage, backdrafting and carbon monoxide ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Modern buildings can make venting harder. The 2008 handbook describes tighter houses that admit less air through infiltration, while attic fans, down-draft cooking ranges and other exhaust devices remove more air than can easily be replaced.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The building then becomes depressurised. If the pressure drop in the building exceeds the draft of the chimney or vent, flue gases and air are drawn down through the venting system into the building. This is called backdrafting.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; If combustion is not complete, carbon monoxide can then reach dangerous concentrations indoors.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Modern buildings can make venting harder. The 2008 handbook describes tighter houses that admit less air through infiltration, while attic fans, down-draft cooking ranges and other exhaust devices remove more air than can easily be replaced.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The building then becomes depressurised. If the pressure drop in the building exceeds the draft of the chimney or vent, flue gases and air are drawn down through the venting system into the building. This is called backdrafting.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; If combustion is not complete, carbon monoxide can then reach dangerous concentrations indoors.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v4.svg|thumb|upright=1.5|alt=House section: exhaust fans remove air, outdoor air is drawn down a gas vent, CO spreads indoors and a CO alarm sits in the hallway|Backdrafting in a depressurised house and the measures described in the 2008 handbook&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Gore Willse (2008a), p. 10-35, and Black (2008), pp. 14-113 and 14-115&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-gas-appliance-venting-v4.svg|thumb|upright=1.5|alt=House section: exhaust fans remove air, outdoor air is drawn down a gas vent, CO spreads indoors and a CO alarm sits in the hallway|Backdrafting in a depressurised house and the measures described in the 2008 handbook.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The worked example above shows how small the buoyancy pressure can be in a short vent. Direct-vent, sealed-combustion appliances take their combustion air directly from outdoors and are essentially immune to this problem, and appliances with powered exhausts are less likely to backdraft.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; For natural draft appliances, the handbook calls for an empirical test of draft and vent flow at installation. The test is run with exhaust fans and other appliances operating, to simulate the worst case.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The handbook also reports an increasing use of make-up air requirements in tight, mechanically ventilated houses.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The worked example above shows how small the buoyancy pressure can be in a short vent. Direct-vent, sealed-combustion appliances take their combustion air directly from outdoors and are essentially immune to this problem, and appliances with powered exhausts are less likely to backdraft.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; For natural draft appliances, the handbook calls for an empirical test of draft and vent flow at installation. The test is run with exhaust fans and other appliances operating, to simulate the worst case.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The handbook also reports an increasing use of make-up air requirements in tight, mechanically ventilated houses.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5783:rev-6654:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=5783&amp;oldid=prev</id>
		<title>Peter: Add SVG figures fse-gas-appliance-venting-v1.svg, fse-gas-appliance-venting-v2.svg, fse-gas-appliance-venting-v3.svg, fse-gas-appliance-venting-v4.svg (list-3 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=5783&amp;oldid=prev"/>
		<updated>2026-11-12T12:08:13Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-gas-appliance-venting-v1.svg, fse-gas-appliance-venting-v2.svg, fse-gas-appliance-venting-v3.svg, fse-gas-appliance-venting-v4.svg (list-3 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 13:08, 12 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l32&quot;&gt;Line 32:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 32:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At the 38 °C lower-end flue gas temperature cited for a condensing appliance, the same 1.5 m vent would generate only about 1 Pa of buoyancy pressure without its required mechanical venting.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-gas-appliance-venting-v3.svg|thumb|upright=1.5|alt=Line chart of natural draft in pascals against mean vent gas temperature for vent heights of 1.5 and 3.7 metres, staying below about 17 Pa|Natural draft of a vent against mean vent gas temperature, from Δp = g h (ρa − ρg) with ρ = 353/T and outdoor air at 20 °C. Based on Van Rossum (2027), §3.2, and Gore Willse (2008a), pp. 10-45 and 10-49.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The draft hood protects the appliance from variations in this weak draft. It is built into the appliance or forms part of the vent connector.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt; It lets the flue gases escape readily if there is no draft, a backdraft or a blockage beyond the hood. It also prevents a backdraft from entering the appliance and neutralises the stack action of the chimney or vent.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; For gas appliances with draft hoods, chimney draft therefore has very little influence on combustion, and the chimney serves only as a conduit for the combustion products.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Draft hoods are generally required on vented appliances, except for direct-vent appliances and units with power burners or mechanical forced venting.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The draft hood protects the appliance from variations in this weak draft. It is built into the appliance or forms part of the vent connector.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt; It lets the flue gases escape readily if there is no draft, a backdraft or a blockage beyond the hood. It also prevents a backdraft from entering the appliance and neutralises the stack action of the chimney or vent.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; For gas appliances with draft hoods, chimney draft therefore has very little influence on combustion, and the chimney serves only as a conduit for the combustion products.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Draft hoods are generally required on vented appliances, except for direct-vent appliances and units with power burners or mechanical forced venting.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-gas-appliance-venting-v1.svg|thumb|upright=1.5|alt=Section through a gas furnace with draft hood, vent connector and Type B vent rising through a roof, with flue gas, dilution air and spill paths|A natural-draft gas venting system with draft hood, vent connector and Type B vent. Based on Gore Willse (2008a), pp. 10-38, 10-43, 10-46 and 10-49.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Vent types ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Vent types ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l62&quot;&gt;Line 62:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 64:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;NFPA 54 therefore defines four categories of vented gas appliances.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances operate with a nonpositive vent static pressure and a vent gas temperature that avoids excessive condensate in the vent. Category II appliances also have a nonpositive vent pressure, but a vent gas temperature that may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III appliances operate with a positive vent pressure and avoid excessive condensate, while Category IV appliances have a positive vent pressure and may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The category can be determined only in the laboratory under the relevant ANSI test standard, and it is shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;NFPA 54 therefore defines four categories of vented gas appliances.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances operate with a nonpositive vent static pressure and a vent gas temperature that avoids excessive condensate in the vent. Category II appliances also have a nonpositive vent pressure, but a vent gas temperature that may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III appliances operate with a positive vent pressure and avoid excessive condensate, while Category IV appliances have a positive vent pressure and may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The category can be determined only in the laboratory under the relevant ANSI test standard, and it is shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-gas-appliance-venting-v2.svg|thumb|upright=1.5|alt=Two by two matrix of gas appliance venting categories I to IV by vent pressure and condensate, with the vent type each needs|The four venting categories of gas appliances in NFPA 54 and the vents they need. Based on Gore Willse (2008a), pp. 10-42–10-45.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The category sets the type of vent. Categories III and IV need vents that withstand positive pressure and are sealed against leakage, while Categories I and II rely on natural draft through a vertical vent.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Categories II and IV need corrosion-resistant vents that contain and dispose of condensate, and few if any Category II appliances are on the market.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances use conventional systems, mainly Type B vents and masonry chimneys. Masonry chimneys heat up slowly and often have to be relined with aluminium or stainless steel to limit condensation.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III and IV appliances can typically vent horizontally through a side wall, with the materials, sizes and joint sealants specified by the manufacturer.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The category sets the type of vent. Categories III and IV need vents that withstand positive pressure and are sealed against leakage, while Categories I and II rely on natural draft through a vertical vent.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Categories II and IV need corrosion-resistant vents that contain and dispose of condensate, and few if any Category II appliances are on the market.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances use conventional systems, mainly Type B vents and masonry chimneys. Masonry chimneys heat up slowly and often have to be relined with aluminium or stainless steel to limit condensation.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III and IV appliances can typically vent horizontally through a side wall, with the materials, sizes and joint sealants specified by the manufacturer.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l78&quot;&gt;Line 78:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 81:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Spillage, backdrafting and carbon monoxide ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Spillage, backdrafting and carbon monoxide ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Modern buildings can make venting harder. The 2008 handbook describes tighter houses that admit less air through infiltration, while attic fans, down-draft cooking ranges and other exhaust devices remove more air than can easily be replaced.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The building then becomes depressurised. If the pressure drop in the building exceeds the draft of the chimney or vent, flue gases and air are drawn down through the venting system into the building. This is called backdrafting.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; If combustion is not complete, carbon monoxide can then reach dangerous concentrations indoors.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Modern buildings can make venting harder. The 2008 handbook describes tighter houses that admit less air through infiltration, while attic fans, down-draft cooking ranges and other exhaust devices remove more air than can easily be replaced.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The building then becomes depressurised. If the pressure drop in the building exceeds the draft of the chimney or vent, flue gases and air are drawn down through the venting system into the building. This is called backdrafting.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; If combustion is not complete, carbon monoxide can then reach dangerous concentrations indoors.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-gas-appliance-venting-v4.svg|thumb|upright=1.5|alt=House section: exhaust fans remove air, outdoor air is drawn down a gas vent, CO spreads indoors and a CO alarm sits in the hallway|Backdrafting in a depressurised house and the measures described in the 2008 handbook. Based on Gore Willse (2008a), p. 10-35, and Black (2008), pp. 14-113 and 14-115.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The worked example above shows how small the buoyancy pressure can be in a short vent. Direct-vent, sealed-combustion appliances take their combustion air directly from outdoors and are essentially immune to this problem, and appliances with powered exhausts are less likely to backdraft.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; For natural draft appliances, the handbook calls for an empirical test of draft and vent flow at installation. The test is run with exhaust fans and other appliances operating, to simulate the worst case.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The handbook also reports an increasing use of make-up air requirements in tight, mechanically ventilated houses.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The worked example above shows how small the buoyancy pressure can be in a short vent. Direct-vent, sealed-combustion appliances take their combustion air directly from outdoors and are essentially immune to this problem, and appliances with powered exhausts are less likely to backdraft.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; For natural draft appliances, the handbook calls for an empirical test of draft and vent flow at installation. The test is run with exhaust fans and other appliances operating, to simulate the worst case.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The handbook also reports an increasing use of make-up air requirements in tight, mechanically ventilated houses.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4228:rev-5783:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=4228&amp;oldid=prev</id>
		<title>Mark: FSE wiki: fact-check: scope vent draft and combustion examples; date historical rules and CO figures (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=4228&amp;oldid=prev"/>
		<updated>2026-11-08T00:19:10Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: fact-check: scope vent draft and combustion examples; date historical rules and CO figures (written by Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;amp;diff=4228&amp;amp;oldid=3616&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=3616&amp;oldid=prev</id>
		<title>Mark: New FSE wiki article: Gas appliance venting (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Gas_appliance_venting&amp;diff=3616&amp;oldid=prev"/>
		<updated>2026-11-07T21:32:19Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Gas appliance venting (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;&amp;#039;&amp;#039;&amp;#039;Gas appliance venting&amp;#039;&amp;#039;&amp;#039; is the removal of the combustion products of gas-fired appliances to the outdoors through a vent connector and a chimney, gas vent or other venting system.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-35.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-42&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-42.&amp;lt;/ref&amp;gt; A good venting system carries the flue gases safely to the outdoors, protects the building from their heat and resists the condensate that they can form.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-43.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-44.&amp;lt;/ref&amp;gt; When it fails, the products spill into the building, and [[incomplete combustion]] then lets [[carbon monoxide]] (CO) build up to dangerous levels.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; In the United States, CO accumulation is generally caused by faulty heating appliances, too little make-up air, or chimneys and vents that are blocked, badly designed, badly installed or missing.&amp;lt;ref name=&amp;quot;BL-14-113&amp;quot;&amp;gt;Black (2008), p. 14-113.&amp;lt;/ref&amp;gt; United States practice follows NFPA 54, the &amp;#039;&amp;#039;National Fuel Gas Code&amp;#039;&amp;#039;, which sorts vented appliances into four categories by vent pressure and vent gas temperature.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Fan-assisted and condensing appliances, developed in the 1970s and 1980s, have replaced the simple and mostly trouble-free venting of older appliances with careful vent design.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Purpose and principles ==&lt;br /&gt;
Combustion is complete when all of the fuel is oxidised by the air supplied to it, and gas appliances operate with some excess air because perfect combustion is impractical.&amp;lt;ref name=&amp;quot;GW-10-9&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-9.&amp;lt;/ref&amp;gt; Incomplete combustion in a fuel-burning device can produce hazardous carbon monoxide. It usually results from an inadequate air supply, insufficient mixing of air and gas, or a temperature too low to sustain combustion.&amp;lt;ref name=&amp;quot;GW-10-9&amp;quot; /&amp;gt; For methane, the main component of [[natural gas]], complete combustion consumes two molecules of oxygen per molecule of fuel and forms one molecule of carbon dioxide and two of water.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-16&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-16.&amp;lt;/ref&amp;gt; With air containing 21 % oxygen, a simple calculation gives about 9.5 volumes of air per volume of methane and a flue gas that is about 19 % water vapour by volume.&amp;lt;ref name=&amp;quot;VR-4.2&amp;quot;&amp;gt;Van Rossum (2027), §4.2.&amp;lt;/ref&amp;gt; That water vapour is the source of the condensation problems of modern vents.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Natural gas is the most commonly used gas fuel in the United States, and [[liquefied petroleum gas]] is popular in sparsely settled areas and recreational vehicles.&amp;lt;ref name=&amp;quot;GW-10-16&amp;quot; /&amp;gt; Injection burners, in which a jet of gas draws primary air into the burner, are common in residential and commercial gas appliances.&amp;lt;ref name=&amp;quot;GW-10-16&amp;quot; /&amp;gt; NFPA 54 specifies which gas appliances must be vented. Generally, larger heating appliances such as boilers and furnaces need venting, whereas smaller appliances such as listed cooking stoves and hot plates do not.&amp;lt;ref name=&amp;quot;GW-10-39&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-39.&amp;lt;/ref&amp;gt; Several unvented appliances in one space may still need venting if their aggregate input exceeds 0.2 kW/m³ (20 Btu/h per ft³) of the space.&amp;lt;ref name=&amp;quot;GW-10-41&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-41.&amp;lt;/ref&amp;gt; A space of 30 m³ thus reaches this threshold at about 6 kW of total input.&lt;br /&gt;
&lt;br /&gt;
Venting works together with the supply of air. Rooms such as furnace and boiler rooms need a means of supplying air for combustion and ventilation, and NFPA 31 and NFPA 54 give recommendations because no universal formula exists.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; A chimney or vent connector is the pipe or breeching that joins an appliance to its chimney or vent, unless the chimney or vent is attached directly to the appliance.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; In the 2008 handbook, the installation, alteration and repair of gas appliances and gas piping is reserved for qualified agencies fully experienced in this work.&amp;lt;ref name=&amp;quot;GW-10-17&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-17.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Natural draft and the draft hood ==&lt;br /&gt;
Traditional gas appliances rely on natural draft. Before the 1980s, most gas furnaces had an atmospheric burner, a heat exchanger and a draft hood at the outlet. The mixture of flue gas and dilution air was drawn up the chimney or vent by the buoyancy of the warm gases.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; This buoyancy is a form of the [[stack effect]]: a warm gas column is lighter than the surrounding cold air, and a vertical duct strengthens the effect because the gas cannot mix sideways.&amp;lt;ref name=&amp;quot;VR-6.6&amp;quot;&amp;gt;Van Rossum (2027), §6.6.&amp;lt;/ref&amp;gt; The available draft can be estimated as the pressure difference between a cold air column and a warm gas column of the same height. The density of air and flue gas follows approximately from their absolute temperature.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot;&amp;gt;Van Rossum (2027), §3.2.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\Delta p \approx g \cdot h \cdot \left(\rho_a - \rho_g\right), \qquad \rho \approx \frac{353}{T}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\Delta p&amp;lt;/math&amp;gt; || Draft, the pressure difference that drives the flow || Pa&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;g&amp;lt;/math&amp;gt; || Acceleration due to gravity, 9.81 || m/s²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;h&amp;lt;/math&amp;gt; || Height of the vent from the appliance to the outlet || m&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\rho_a&amp;lt;/math&amp;gt;, &amp;lt;math&amp;gt;\rho_g&amp;lt;/math&amp;gt; || Density of outdoor air and of the vent gas || kg/m³&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;T&amp;lt;/math&amp;gt; || Absolute temperature of the gas concerned || K&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The relation holds for gases near atmospheric pressure and for a vent filled with gas of uniform temperature.&amp;lt;ref name=&amp;quot;VR-3.2&amp;quot; /&amp;gt; Draft hood appliances such as furnaces, water heaters and boilers must pass spillage tests with only 1.5 m (5 ft) of vent height. Wall furnaces need a vent outlet at least 3.7 m (12 ft) above the floor.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-49.&amp;lt;/ref&amp;gt; With outdoor air at 20 °C (1.20 kg/m³) and a mean vent gas temperature of 150 °C (0.83 kg/m³), a 1.5 m vent gives Δp ≈ 9.81 × 1.5 × 0.37 ≈ 5.5 Pa. A 3.7 m vent gives about 13 Pa.&lt;br /&gt;
&lt;br /&gt;
At the 38 °C flue gas temperature of a condensing appliance, the same 1.5 m vent would give only about 1 Pa.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-45.&amp;lt;/ref&amp;gt; The vent gas temperatures in this example are illustrative values. For comparison, residential oil burners are designed for a draft of 10 to 15 Pa, and forced-draft boilers may run their chimney at 120 to 370 Pa above atmospheric pressure.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The draft hood protects the appliance from variations in this weak draft. It is built into the appliance or forms part of the vent connector.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-46.&amp;lt;/ref&amp;gt; It lets the flue gases escape readily if there is no draft, a backdraft or a blockage beyond the hood. It also prevents a backdraft from entering the appliance and neutralises the stack action of the chimney or vent.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; For gas appliances with draft hoods, chimney draft therefore has very little influence on combustion, and the chimney serves only as a conduit for the combustion products.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Draft hoods are generally required on vented appliances, except for direct-vent appliances and units with power burners or mechanical forced venting.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Vent types ==&lt;br /&gt;
Vents are laboratory-tested, factory-built units for venting fuel-burning appliances, and each type has a specific use.&amp;lt;ref name=&amp;quot;GW-10-42&amp;quot; /&amp;gt; The handbook&amp;#039;s vent selection chart, summarised in the table, shows which vent serves which appliance.&amp;lt;ref name=&amp;quot;GW-10-42&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; Single-wall metal pipe must be made of galvanised sheet steel of at least 0.51 mm (No. 20 gauge) or another noncombustible, corrosion-resistant material.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; Its use is restricted to runs directly from the appliance space through the roof or an exterior wall. It may not start in or pass through an attic or other concealed space, nor through any floor or ceiling.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt; For metal chimneys, the handbook stresses corrosion-resistant metal when the gases are at or below 177 °C (350 °F), because exposed outdoor sections may fall below the dew point and condense continuously.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Vent type !! Used for&lt;br /&gt;
|-&lt;br /&gt;
| Type B gas vent || Listed gas appliances with draft hoods and other Category I appliances listed for Type B vents, such as furnaces, boilers, water heaters and room heaters&lt;br /&gt;
|-&lt;br /&gt;
| Type BW gas vent || Listed vented gas wall furnaces&lt;br /&gt;
|-&lt;br /&gt;
| Type L vent || Oil appliances listed for Type L vents, and gas appliances listed for Type B vents&lt;br /&gt;
|-&lt;br /&gt;
| Special gas vent || Listed Category II, III and IV gas appliances, as specified by the appliance manufacturer&lt;br /&gt;
|-&lt;br /&gt;
| Pellet vent || Listed pellet-burning appliances&lt;br /&gt;
|-&lt;br /&gt;
| Single-wall metal pipe || Residential and low-heat gas appliances with draft hoods, and incinerators used outdoors; not solid-fuel appliances&lt;br /&gt;
|-&lt;br /&gt;
| Plastic pipe (PVC) || Category IV appliances, within the limits of the manufacturer&amp;#039;s instructions&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Efficiency and venting categories ==&lt;br /&gt;
Older gas furnaces with draft hoods typically reached an annual fuel utilisation efficiency (AFUE) of 65 to 75 %.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; The National Appliance Energy Efficiency Act of 1987 requires all gas furnaces in the United States to reach at least 78 %, and most standard furnaces now achieve 78 to 83 %.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; To reach this, the standing pilot was replaced by intermittent ignition, the draft hood was mostly eliminated and a small fan was added at the flue outlet.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; High-efficiency condensing furnaces exceed 90 % by cooling the flue gases below their dew point in a second heat exchanger.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
These changes altered the vent conditions. Lower heat loss and lower gas flow make the vent cooler and reduce the available draft. Without dilution air, the humidity and dew point of the vent gases rise, and the vent stays wet with corrosive condensate for longer.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt; A fan at the appliance outlet also makes pressurisation of the vent more likely. The vent must then be designed for positive pressure, or sized and configured so that pressurisation cannot occur.&amp;lt;ref name=&amp;quot;GW-10-43&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
NFPA 54 therefore defines four categories of vented gas appliances.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances operate with a nonpositive vent static pressure and a vent gas temperature that avoids excessive condensate in the vent. Category II appliances also have a nonpositive vent pressure, but a vent gas temperature that may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III appliances operate with a positive vent pressure and avoid excessive condensate, while Category IV appliances have a positive vent pressure and may cause excessive condensate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The category can be determined only in the laboratory under the relevant ANSI test standard, and it is shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The category sets the type of vent. Categories III and IV need vents that withstand positive pressure and are sealed against leakage, while Categories I and II rely on natural draft through a vertical vent.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Categories II and IV need corrosion-resistant vents that contain and dispose of condensate, and few if any Category II appliances are on the market.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category I appliances use conventional systems, mainly Type B vents and masonry chimneys. Masonry chimneys heat up slowly and often have to be relined with aluminium or stainless steel to limit condensation.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Category III and IV appliances can typically vent horizontally through a side wall, with the materials, sizes and joint sealants specified by the manufacturer.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Vent sizing changed in the 1990s. NFPA 54 has provided sizing tables since the 1950s, originally for draft hood appliances and based only on the maximum capacity that prevents spillage.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Research, much of it sponsored by the Gas Research Institute, added a minimum vent capacity. A vent that is too large for the connected input warms up slowly and stays wet for longer, which may corrode it.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; The acceptable vent size therefore lies between a minimum and a maximum, and for some combinations of appliance and vent geometry no acceptable size exists.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Installation: clearances, termination and separation ==&lt;br /&gt;
Vents and connectors must keep a [[clearance to combustibles]].&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; In the 2008 handbook, which reproduces the NFPA 211 table, a single-wall connector from a listed gas appliance with a draft hood that is suitable for a Type B vent needs 152 mm (6 in.). Boilers and furnaces with listed gas burners and draft hoods need 229 mm (9 in.), and gas appliances without draft hoods need 457 mm (18 in.).&amp;lt;ref name=&amp;quot;GW-10-38&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-38.&amp;lt;/ref&amp;gt; Listed Type B and other vents follow the clearances of their listing.&amp;lt;ref name=&amp;quot;GW-10-45&amp;quot; /&amp;gt; Where single-wall pipe from an appliance listed for a Type B vent passes through a combustible roof, it needs a noncombustible thimble at least 100 mm (4 in.) larger in diameter. The thimble extends 457 mm (18 in.) above and 152 mm (6 in.) below the roof.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The outlet must stand high enough above the roof. The commonly cited rule in the handbook requires a gas vent or Type L vent to end at least 0.61 m (2 ft) above the roof, against 0.92 m (3 ft) for a chimney.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; An outlet less than 3.1 m (10 ft) from a ridge, wall or parapet must also be at least 0.61 m above it.&amp;lt;ref name=&amp;quot;GW-10-49&amp;quot; /&amp;gt; Because airflow over a building creates eddy zones on the lee side, these dimensions are sometimes not enough, as the many special vent caps and chimney extensions show.&amp;lt;ref name=&amp;quot;GW-10-50&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-50.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Vents that pass through floors of buildings that require protection of vertical openings must be enclosed. The enclosing walls need a fire resistance rating of at least 1 hour in buildings of less than four storeys and at least 2 hours in taller buildings.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt; The handbook lists this requirement under [[firestopping]]. One appliance per flue gives the best operation, although two or three gas appliances may share a masonry chimney flue at one level if the sizes follow the capacity tables in NFPA 54.&amp;lt;ref name=&amp;quot;GW-10-47&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-47.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Gas appliances also change the life of masonry chimneys. Condensation of flue gas moisture in a masonry chimney serving low-temperature gas appliances can disintegrate the mortar and leave the chimney weak and easily toppled.&amp;lt;ref name=&amp;quot;GW-10-50&amp;quot; /&amp;gt; Liners listed for Category I gas appliances are often aluminium and unsuitable for other residential appliances, so NFPA 54 and NFPA 211 require a warning notice near the chimney inlet.&amp;lt;ref name=&amp;quot;GW-10-48&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-48.&amp;lt;/ref&amp;gt; A solid-fuel appliance connected to such a liner would expose it to temperatures for which it is not designed, and creosote deposits from wood burning are the fuel of a [[chimney fire]].&amp;lt;ref name=&amp;quot;GW-10-48&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-52&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-52.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Spillage, backdrafting and carbon monoxide ==&lt;br /&gt;
Modern buildings make venting harder. Tighter houses admit less air through infiltration, while attic fans, down-draft cooking ranges and other exhaust devices remove more air than can easily be replaced.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; The building then becomes depressurised. If the pressure drop in the building exceeds the draft of the chimney or vent, flue gases and air are drawn down through the venting system into the building. This is called backdrafting.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; If combustion is not complete, carbon monoxide can then reach dangerous concentrations indoors.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The worked example above shows how small the margin is, because the draft of a short vent is only a few pascals. Direct-vent, sealed-combustion appliances take their combustion air directly from outdoors and are essentially immune to this problem, and appliances with powered exhausts are less likely to backdraft.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; For natural draft appliances, the handbook calls for an empirical test of draft and vent flow at installation. The test is run with exhaust fans and other appliances operating, to simulate the worst case.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt; Codes increasingly require make-up air in tight, mechanically ventilated houses.&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Carbon monoxide is a colourless, odourless gas, and the vast majority of deaths from CO poisoning occur in one- and two-family dwellings.&amp;lt;ref name=&amp;quot;BL-14-113&amp;quot; /&amp;gt; United States death certificate data show 200 to 300 unintentional-injury deaths a year from CO.&amp;lt;ref name=&amp;quot;BL-14-113&amp;quot; /&amp;gt; Haemoglobin binds CO about 250 times more strongly than oxygen, and the resulting carboxyhaemoglobin (COHb) reduces the oxygen-carrying capacity of the blood.&amp;lt;ref name=&amp;quot;GB-6-14&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-14.&amp;lt;/ref&amp;gt; Overventilated burning produces little CO, whereas fuel-rich burning produces the products of incomplete combustion. In hood experiments, CO yields rose once the equivalence ratio exceeded about 0.6.&amp;lt;ref name=&amp;quot;GL-2-55&amp;quot;&amp;gt;Gottuk and Lattimer (2002), pp. 2-55–2-60.&amp;lt;/ref&amp;gt; Black (2008) gives an equation for the COHb level after an exposure of &amp;#039;&amp;#039;t&amp;#039;&amp;#039; minutes to a constant CO concentration in parts per million (ppm).&amp;lt;ref name=&amp;quot;BL-14-114&amp;quot;&amp;gt;Black (2008), p. 14-114.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\%COHb_t = \%COHb_0 \, e^{-t/(2398B)} + 218 \left[1 - e^{-t/(2398B)}\right] \left[0.0003 + \frac{ppm_{CO}}{1316}\right]&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;\%COHb_t&amp;lt;/math&amp;gt;, &amp;lt;math&amp;gt;\%COHb_0&amp;lt;/math&amp;gt; || COHb in the blood at time &amp;#039;&amp;#039;t&amp;#039;&amp;#039; and at the start of exposure || %&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;t&amp;lt;/math&amp;gt; || Exposure time || min&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;B&amp;lt;/math&amp;gt; || Constant for work effort, 0.0404 || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;ppm_{CO}&amp;lt;/math&amp;gt; || CO concentration in the inhaled air || ppm&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
For a non-smoker, the initial COHb level can be taken as 0.8 %.&amp;lt;ref name=&amp;quot;PU-2-164&amp;quot;&amp;gt;Purser (2002), p. 2-164.&amp;lt;/ref&amp;gt; Exposure to 400 ppm, a level at which headache and nausea appear after 1 to 2 hours, then gives about 31 % COHb after 60 minutes and about 47 % after 120 minutes.&amp;lt;ref name=&amp;quot;BL-14-114&amp;quot; /&amp;gt; Most deaths from CO in fires have been associated with COHb levels of 50 to 70 %, although both lower and higher values occur.&amp;lt;ref name=&amp;quot;GB-6-14&amp;quot; /&amp;gt; The values in the handbook table are approximate and apply to healthy adults, while children, the elderly and people with existing conditions may be more susceptible.&amp;lt;ref name=&amp;quot;BL-14-114&amp;quot; /&amp;gt; In the United States, NFPA 720 (2005) places a [[carbon monoxide alarm]] outside each sleeping area of dwellings with a fuel-burning appliance, a fireplace or an attached garage, where such alarms are required or desired.&amp;lt;ref name=&amp;quot;BL-14-115&amp;quot;&amp;gt;Black (2008), p. 14-115.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Unvented gas heaters ==&lt;br /&gt;
Gas room heaters and cooking appliances listed for unvented use are the exceptions to the venting rule.&amp;lt;ref name=&amp;quot;GW-10-23&amp;quot;&amp;gt;Gore Willse (2008a), p. 10-23.&amp;lt;/ref&amp;gt; Listed unvented room heaters have an oxygen depletion safety shutoff that stops the gas supply if the oxygen in the room falls below about 18 %. They may not be used in institutions such as convalescent homes.&amp;lt;ref name=&amp;quot;GW-10-41&amp;quot; /&amp;gt; Fuel-burning room heaters are not installed in sleeping quarters for transients, as in hotels and motels. Where heaters are allowed in sleeping quarters and in rooms usually kept closed, the handbook recommends direct-vent appliances.&amp;lt;ref name=&amp;quot;GW-10-23&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The 1996 edition of the &amp;#039;&amp;#039;National Fuel Gas Code&amp;#039;&amp;#039; allowed listed unvented wall-mounted heaters in bedrooms and bathrooms under limits. The [[authority having jurisdiction]] has to approve the installation, a bathroom heater may not exceed 1760 W (6000 Btu/h) and a bedroom heater 2930 W (10,000 Btu/h).&amp;lt;ref name=&amp;quot;GW-10-41&amp;quot; /&amp;gt; The room must also be an unconfined space with a volume of at least 4.8 m³ per kW of heater input (50 ft³ per 1000 Btu/h).&amp;lt;ref name=&amp;quot;GW-10-41&amp;quot; /&amp;gt; A bedroom heater at the 2.93 kW limit therefore needs a room of at least 14 m³, for example 5.9 m² of floor area at a ceiling height of 2.4 m. The change followed problems in the southern United States, where old unvented heaters, many of them installed before 1940, could neither be repaired nor legally replaced.&amp;lt;ref name=&amp;quot;GW-10-41&amp;quot; /&amp;gt; The standard to which these heaters are listed requires an oxygen depletion sensor to ensure adequate combustion air.&amp;lt;ref name=&amp;quot;GW-10-42&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limitations and misconceptions ==&lt;br /&gt;
The category of an existing gas appliance cannot be checked on site. The handbook states that it cannot be determined reliably by field testing, and that it is part of the certification shown on the rating plate.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; Venting arrangements that worked for older appliances are not automatically acceptable either. Combinations of input and vent configuration that were routine in the past must be carefully scrutinised for mid-efficiency, fan-assisted appliances and may be unacceptable.&amp;lt;ref name=&amp;quot;GW-10-44&amp;quot; /&amp;gt; A draft hood also does not make venting failure harmless. It relieves backdrafts at the appliance, but the gases it releases spill into the room.&amp;lt;ref name=&amp;quot;GW-10-46&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;GW-10-35&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Venting is also a risk-management problem. In the causal-sequence example of Meacham (2002), a blocked ventilation opening or too much fuel on a fire leads to smoke, CO and high temperatures indoors. The countermeasures include providing an opening that cannot be obstructed and cleaning it regularly.&amp;lt;ref name=&amp;quot;ME-5-157&amp;quot;&amp;gt;Meacham (2002), p. 5-157.&amp;lt;/ref&amp;gt; Outside the United States, rules are expressed differently. In New Zealand, Building Code clause C2.3, as reproduced in the 2013 commentary, requires fixed appliances using controlled combustion to have a low probability of creating explosive or hazardous conditions in or around the building.&amp;lt;ref name=&amp;quot;MB-14&amp;quot;&amp;gt;Ministry of Business, Innovation and Employment (2013), pp. 14–15.&amp;lt;/ref&amp;gt; The values and requirements in this article are those of NFPA 54, NFPA 211 and NFPA 720 as summarised in the 2008 handbook; later editions may differ.&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Commercial kitchen exhaust]]&lt;br /&gt;
* [[Flame safeguard]]&lt;br /&gt;
* [[Fuel oil system]]&lt;br /&gt;
* [[Incinerator]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Black, A. (2008). Carbon monoxide detection in residential occupancies. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 14-113–14-117). National Fire Protection Association.&lt;br /&gt;
* Gann, R. G., &amp;amp; Bryner, N. P. (2008). Combustion products and their effects on life safety. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-11–6-34). National Fire Protection Association.&lt;br /&gt;
* Gore Willse, P. J. (2008a). Heating systems and appliances. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 10-9–10-56). National Fire Protection Association.&lt;br /&gt;
* Gottuk, D. T., &amp;amp; Lattimer, B. Y. (2002). Effect of combustion conditions on species production. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-54–2-82). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Meacham, B. J. (2002). Building fire risk analysis. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 5-153–5-175). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Ministry of Business, Innovation and Employment. (2013). &amp;#039;&amp;#039;Commentary for Building Code clauses C1–C6 and Verification Method C/VM2&amp;#039;&amp;#039;.&lt;br /&gt;
* Purser, D. A. (2002). Toxicity assessment of combustion products. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-83–2-171). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
&lt;br /&gt;
[[Category:Building Services &amp;amp; Electrical]]&lt;/div&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
</feed>