<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Flammable_gas</id>
	<title>Flammable gas - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Flammable_gas"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;action=history"/>
	<updated>2026-11-21T21:58:54Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=9242&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 1 error: content (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=9242&amp;oldid=prev"/>
		<updated>2026-11-15T23:37:50Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 1 error: content (Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 00:37, 16 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l6&quot;&gt;Line 6:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 6:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook chapter on gases uses the term gas only for substances that are gaseous at normal temperature and pressure (NTP), about 21 °C (70 °F) and 101 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; In the United States, NFPA 55, as described in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, is the standard for the storage, use and handling of compressed gases. It defines a flammable gas as a material that is a gas at 20 °C (68 °F) or less at 101.325 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; It must also be ignitable at that pressure in a mixture of 13 % or less by volume with air, or have a flammable range with air of at least 12 %, regardless of the lower limit.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; A flammable liquefied gas is a liquefied compressed gas that is partly liquid at 20 °C in its charged container and that is flammable.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook chapter on gases uses the term gas only for substances that are gaseous at normal temperature and pressure (NTP), about 21 °C (70 °F) and 101 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; In the United States, NFPA 55, as described in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, is the standard for the storage, use and handling of compressed gases. It defines a flammable gas as a material that is a gas at 20 °C (68 °F) or less at 101.325 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; It must also be ignitable at that pressure in a mixture of 13 % or less by volume with air, or have a flammable range with air of at least 12 %, regardless of the lower limit.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; A flammable liquefied gas is a liquefied compressed gas that is partly liquid at 20 °C in its charged container and that is flammable.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the 2008 handbook, Lemoff notes that these definitions match those in the DOT regulations then used to label gases for transport in the United States.&amp;lt;ref name=&quot;L-6-166&quot; /&amp;gt; They are also described as essentially identical to the United Nations protocols for international gas shipments.&amp;lt;ref name=&quot;L-6-166&quot; /&amp;gt; In that account of the DOT hazard classes, flammable gases form Division 2.1, with propane, butadiene, acetylene and methyl chloride as examples.&amp;lt;ref name=&quot;CJW-13-119&quot;&amp;gt;C. J. Wright (2008a), pp. 13-119–13-120.&amp;lt;/ref&amp;gt; In the &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2007 &lt;/del&gt;edition of NFPA 704, the highest flammability rating, 4, covers materials that turn rapidly or completely into vapour at atmospheric pressure and normal ambient temperature and burn readily.&amp;lt;ref name=&quot;CJW-13-123&quot;&amp;gt;C. J. Wright (2008a), p. 13-123.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the 2008 handbook, Lemoff notes that these definitions match those in the DOT regulations then used to label gases for transport in the United States.&amp;lt;ref name=&quot;L-6-166&quot; /&amp;gt; They are also described as essentially identical to the United Nations protocols for international gas shipments.&amp;lt;ref name=&quot;L-6-166&quot; /&amp;gt; In that account of the DOT hazard classes, flammable gases form Division 2.1, with propane, butadiene, acetylene and methyl chloride as examples.&amp;lt;ref name=&quot;CJW-13-119&quot;&amp;gt;C. J. Wright (2008a), pp. 13-119–13-120.&amp;lt;/ref&amp;gt; In the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2001 &lt;/ins&gt;edition of NFPA 704, the highest flammability rating, 4, covers materials that turn rapidly or completely into vapour at atmospheric pressure and normal ambient temperature and burn readily.&amp;lt;ref name=&quot;CJW-13-123&quot;&amp;gt;C. J. Wright (2008a), p. 13-123.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 55 classification described by Lemoff places flammable gases among the physical-hazard classes, next to nonflammable, oxidising, pyrophoric and unstable reactive gases.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Pyrophoric gases are flammable gases that ignite spontaneously in air, such as silane and phosphine, and are found mostly in semiconductor manufacturing.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Some gases that can be made to burn are still treated as nonflammable because their range is narrow or their lower limit high. Anhydrous ammonia is the handbook&amp;#039;s example: DOT classified it as a nonflammable gas for interstate transport at the time.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The NFPA 55 classification described by Lemoff places flammable gases among the physical-hazard classes, next to nonflammable, oxidising, pyrophoric and unstable reactive gases.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Pyrophoric gases are flammable gases that ignite spontaneously in air, such as silane and phosphine, and are found mostly in semiconductor manufacturing.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Some gases that can be made to burn are still treated as nonflammable because their range is narrow or their lower limit high. Anhydrous ammonia is the handbook&amp;#039;s example: DOT classified it as a nonflammable gas for interstate transport at the time.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-6639:rev-9242:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=6639&amp;oldid=prev</id>
		<title>Mark: Remove source references from image captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=6639&amp;oldid=prev"/>
		<updated>2026-11-13T07:29:22Z</updated>

		<summary type="html">&lt;p&gt;Remove source references from image captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:29, 13 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l84&quot;&gt;Line 84:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 84:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v1.svg|thumb|upright=1.5|alt=Horizontal bars from lower to upper flammable limit for eight gases, with a vertical line at 13 percent by volume.|Flammable ranges of eight gases in air. Under the US criteria &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;described by Lemoff (2008)&lt;/del&gt;, a gas meets the flammable-gas definition if its lower limit is at most 13 % or its range is at least 12 percentage points wide; anhydrous ammonia meets neither.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v1.svg|thumb|upright=1.5|alt=Horizontal bars from lower to upper flammable limit for eight gases, with a vertical line at 13 percent by volume.|Flammable ranges of eight gases in air. Under the US criteria, a gas meets the flammable-gas definition if its lower limit is at most 13 % or its range is at least 12 percentage points wide; anhydrous ammonia meets neither.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4868:rev-6639:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4868&amp;oldid=prev</id>
		<title>Linda: Remove bibliographic source lines from image captions and descriptions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4868&amp;oldid=prev"/>
		<updated>2026-11-08T07:27:16Z</updated>

		<summary type="html">&lt;p&gt;Remove bibliographic source lines from image captions and descriptions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:27, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l55&quot;&gt;Line 55:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 55:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about 414 to 758 kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Conventional structures withstand only about 3.45 to 6.89 kPa (0.5 to 1.0 psi).&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about 414 to 758 kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Conventional structures withstand only about 3.45 to 6.89 kPa (0.5 to 1.0 psi).&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v3.svg|thumb|upright=1.5|alt=Two bars on a logarithmic pressure scale: 414 to 758 kPa for a room full of gas mixture, 3.45 to 6.89 kPa for conventional structures.|Pressure that an enclosure full of a flammable gas–air mixture would have to withstand, compared with the strength of conventional structures. Most combustion explosions occur with less than 25 % of the room filled&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Lemoff (2008), p. 6-175&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v3.svg|thumb|upright=1.5|alt=Two bars on a logarithmic pressure scale: 414 to 758 kPa for a room full of gas mixture, 3.45 to 6.89 kPa for conventional structures.|Pressure that an enclosure full of a flammable gas–air mixture would have to withstand, compared with the strength of conventional structures. Most combustion explosions occur with less than 25 % of the room filled.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l62&quot;&gt;Line 62:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 62:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;If the release is not ignited at once, a cloud forms and drifts downwind. A remote ignition source can then ignite it, producing a vapour cloud fire, or [[flash fire]], that burns back towards the release point.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; The burning cloud can then start a steady jet flame or pool fire at the source.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; Where the cloud is large and the flame accelerates, a [[vapour cloud explosion]] can follow. Turbulent jet releases, partial confinement, congested equipment and ignition delays all promote the rapid flame speeds involved.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Damaging overpressures in a virtually unconfined cloud need flame speeds of the order of 100 m/s.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Propane, propylene, ethylene and aromatic hydrocarbons have been involved in many such explosions.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;If the release is not ignited at once, a cloud forms and drifts downwind. A remote ignition source can then ignite it, producing a vapour cloud fire, or [[flash fire]], that burns back towards the release point.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; The burning cloud can then start a steady jet flame or pool fire at the source.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; Where the cloud is large and the flame accelerates, a [[vapour cloud explosion]] can follow. Turbulent jet releases, partial confinement, congested equipment and ignition delays all promote the rapid flame speeds involved.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Damaging overpressures in a virtually unconfined cloud need flame speeds of the order of 100 m/s.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Propane, propylene, ethylene and aromatic hydrocarbons have been involved in many such explosions.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v2.svg|thumb|upright=1.5|alt=Gas-release event tree: prompt ignition gives a jet fire, delayed ignition a flash fire or explosion; unignited gas may disperse or accumulate.|Possible outcomes of a flammable gas release. Immediate ignition gives a jet fire; delayed ignition of a drifting cloud gives a flash fire that can burn back to a jet fire, or an explosion where confinement and congestion are present&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Beyler (2002a), p. 3-269, Lemoff (2008), pp. 6-174 to 6-175, and Zalosh (2008), p. 2-104&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v2.svg|thumb|upright=1.5|alt=Gas-release event tree: prompt ignition gives a jet fire, delayed ignition a flash fire or explosion; unignited gas may disperse or accumulate.|Possible outcomes of a flammable gas release. Immediate ignition gives a jet fire; delayed ignition of a drifting cloud gives a flash fire that can burn back to a jet fire, or an explosion where confinement and congestion are present.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flammable gases also arise from processes. In nuclear power plants the most common is hydrogen, used to cool generators and released in battery rooms.&amp;lt;ref name=&amp;quot;IS-1-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 1-8.&amp;lt;/ref&amp;gt; In electric vehicles, a battery in thermal runaway can release flammable gases. Ignited, they can cause a flare fire or a gas cloud explosion.&amp;lt;ref name=&amp;quot;VdG-22&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 22.&amp;lt;/ref&amp;gt; If they are not ignited at once, they can accumulate in a confined or poorly ventilated car park and explode once the lower explosion limit is reached.&amp;lt;ref name=&amp;quot;VdG-27&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 27.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flammable gases also arise from processes. In nuclear power plants the most common is hydrogen, used to cool generators and released in battery rooms.&amp;lt;ref name=&amp;quot;IS-1-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 1-8.&amp;lt;/ref&amp;gt; In electric vehicles, a battery in thermal runaway can release flammable gases. Ignited, they can cause a flare fire or a gas cloud explosion.&amp;lt;ref name=&amp;quot;VdG-22&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 22.&amp;lt;/ref&amp;gt; If they are not ignited at once, they can accumulate in a confined or poorly ventilated car park and explode once the lower explosion limit is reached.&amp;lt;ref name=&amp;quot;VdG-27&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 27.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l73&quot;&gt;Line 73:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 73:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Cholin (2008a), p. 14-103&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l84&quot;&gt;Line 84:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 84:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v1.svg|thumb|upright=1.5|alt=Horizontal bars from lower to upper flammable limit for eight gases, with a vertical line at 13 percent by volume.|Flammable ranges of eight gases in air. Under the US criteria described by Lemoff (2008), a gas meets the flammable-gas definition if its lower limit is at most 13 % or its range is at least 12 percentage points wide; anhydrous ammonia meets neither&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Lemoff (2008), pp. 6-165 and 6-174&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v1.svg|thumb|upright=1.5|alt=Horizontal bars from lower to upper flammable limit for eight gases, with a vertical line at 13 percent by volume.|Flammable ranges of eight gases in air. Under the US criteria described by Lemoff (2008), a gas meets the flammable-gas definition if its lower limit is at most 13 % or its range is at least 12 percentage points wide; anhydrous ammonia meets neither.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l109&quot;&gt;Line 109:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 109:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The mixing factor ranges from 0.2 for rooms ventilated only by infiltration through cracks to 0.9 for a perforated ceiling supply with several exhausts.&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-10.&amp;lt;/ref&amp;gt; As an assumed example, a room of 4 m × 4 m × 3 m (48 m³) has two air changes per hour, or 1.6 m³/min. A natural gas leak of 0.02 m³/min then gives a long-term modelled room concentration of 0.02/1.6 = 1.25 %. That is about 27 % of the lower limit of 4.7 %, so the calculated room concentration stays below that limit.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The concentration reaches one-fifth of the lower limit, 0.94 %, when 1 − e&amp;lt;sup&amp;gt;−&amp;#039;&amp;#039;KN&amp;#039;&amp;#039;&amp;lt;/sup&amp;gt; = 0.94/1.25 = 0.752. With perfect mixing (&amp;#039;&amp;#039;K&amp;#039;&amp;#039; = 1) this takes 1.39 air changes, or about 42 minutes.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The mixing factor ranges from 0.2 for rooms ventilated only by infiltration through cracks to 0.9 for a perforated ceiling supply with several exhausts.&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-10.&amp;lt;/ref&amp;gt; As an assumed example, a room of 4 m × 4 m × 3 m (48 m³) has two air changes per hour, or 1.6 m³/min. A natural gas leak of 0.02 m³/min then gives a long-term modelled room concentration of 0.02/1.6 = 1.25 %. That is about 27 % of the lower limit of 4.7 %, so the calculated room concentration stays below that limit.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The concentration reaches one-fifth of the lower limit, 0.94 %, when 1 − e&amp;lt;sup&amp;gt;−&amp;#039;&amp;#039;KN&amp;#039;&amp;#039;&amp;lt;/sup&amp;gt; = 0.94/1.25 = 0.752. With perfect mixing (&amp;#039;&amp;#039;K&amp;#039;&amp;#039; = 1) this takes 1.39 air changes, or about 42 minutes.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v4.svg|thumb|upright=1.5|alt=Two rising curves of gas concentration against time levelling off at 1.25 percent, with a dashed line at 0.94 percent.|Modelled concentration in a 48 m³ room with two air changes per hour after a natural gas leak of 0.02 m³/min starts, for perfect mixing (K = 1) and K = 0.2, with the NFPA 69 method&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Iqbal and Salley (2004), p. 16-9&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v4.svg|thumb|upright=1.5|alt=Two rising curves of gas concentration against time levelling off at 1.25 percent, with a dashed line at 0.94 percent.|Modelled concentration in a 48 m³ room with two air changes per hour after a natural gas leak of 0.02 m³/min starts, for perfect mixing (K = 1) and K = 0.2, with the NFPA 69 method.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The same leak of propane would reach 58 % of its lower limit of 2.15 %.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; In this room, a propane leak of about 0.034 m³/min would bring the modelled room concentration to the lower limit; at 21 °C and 101 kPa this is roughly 3.8 kg/h. Real rooms are not perfectly mixed, and the handbook warns that practical ventilation systems can handle only rather nominal release rates.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; A layer or pocket near the leak can therefore be flammable even while the modelled room concentration remains below the lower limit.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The same leak of propane would reach 58 % of its lower limit of 2.15 %.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; In this room, a propane leak of about 0.034 m³/min would bring the modelled room concentration to the lower limit; at 21 °C and 101 kPa this is roughly 3.8 kg/h. Real rooms are not perfectly mixed, and the handbook warns that practical ventilation systems can handle only rather nominal release rates.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; A layer or pocket near the leak can therefore be flammable even while the modelled room concentration remains below the lower limit.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4610:rev-4868:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4610&amp;oldid=prev</id>
		<title>Linda: Simplify image descriptions and captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4610&amp;oldid=prev"/>
		<updated>2026-11-08T07:07:43Z</updated>

		<summary type="html">&lt;p&gt;Simplify image descriptions and captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:07, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l73&quot;&gt;Line 73:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 73:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester. Based on Cholin (2008a), p. 14-103. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;small&amp;gt;(AI illustration)&amp;lt;/small&amp;gt;&lt;/del&gt;]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester. Based on Cholin (2008a), p. 14-103.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4563:rev-4610:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4563&amp;oldid=prev</id>
		<title>Lisa: Add 4 watermarked NFPA SVG illustrations</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4563&amp;oldid=prev"/>
		<updated>2026-11-08T07:01:09Z</updated>

		<summary type="html">&lt;p&gt;Add 4 watermarked NFPA SVG illustrations&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:01, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l55&quot;&gt;Line 55:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 55:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about 414 to 758 kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Conventional structures withstand only about 3.45 to 6.89 kPa (0.5 to 1.0 psi).&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about 414 to 758 kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Conventional structures withstand only about 3.45 to 6.89 kPa (0.5 to 1.0 psi).&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flammable-gas-v3.svg|thumb|upright=1.5|alt=Two bars on a logarithmic pressure scale: 414 to 758 kPa for a room full of gas mixture, 3.45 to 6.89 kPa for conventional structures.|Pressure that an enclosure full of a flammable gas–air mixture would have to withstand, compared with the strength of conventional structures. Most combustion explosions occur with less than 25 % of the room filled. Based on Lemoff (2008), p. 6-175.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l61&quot;&gt;Line 61:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 62:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;If the release is not ignited at once, a cloud forms and drifts downwind. A remote ignition source can then ignite it, producing a vapour cloud fire, or [[flash fire]], that burns back towards the release point.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; The burning cloud can then start a steady jet flame or pool fire at the source.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; Where the cloud is large and the flame accelerates, a [[vapour cloud explosion]] can follow. Turbulent jet releases, partial confinement, congested equipment and ignition delays all promote the rapid flame speeds involved.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Damaging overpressures in a virtually unconfined cloud need flame speeds of the order of 100 m/s.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Propane, propylene, ethylene and aromatic hydrocarbons have been involved in many such explosions.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;If the release is not ignited at once, a cloud forms and drifts downwind. A remote ignition source can then ignite it, producing a vapour cloud fire, or [[flash fire]], that burns back towards the release point.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; The burning cloud can then start a steady jet flame or pool fire at the source.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; Where the cloud is large and the flame accelerates, a [[vapour cloud explosion]] can follow. Turbulent jet releases, partial confinement, congested equipment and ignition delays all promote the rapid flame speeds involved.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Damaging overpressures in a virtually unconfined cloud need flame speeds of the order of 100 m/s.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Propane, propylene, ethylene and aromatic hydrocarbons have been involved in many such explosions.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flammable-gas-v2.svg|thumb|upright=1.5|alt=Gas-release event tree: prompt ignition gives a jet fire, delayed ignition a flash fire or explosion; unignited gas may disperse or accumulate.|Possible outcomes of a flammable gas release. Immediate ignition gives a jet fire; delayed ignition of a drifting cloud gives a flash fire that can burn back to a jet fire, or an explosion where confinement and congestion are present. Based on Beyler (2002a), p. 3-269, Lemoff (2008), pp. 6-174 to 6-175, and Zalosh (2008), p. 2-104.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flammable gases also arise from processes. In nuclear power plants the most common is hydrogen, used to cool generators and released in battery rooms.&amp;lt;ref name=&amp;quot;IS-1-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 1-8.&amp;lt;/ref&amp;gt; In electric vehicles, a battery in thermal runaway can release flammable gases. Ignited, they can cause a flare fire or a gas cloud explosion.&amp;lt;ref name=&amp;quot;VdG-22&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 22.&amp;lt;/ref&amp;gt; If they are not ignited at once, they can accumulate in a confined or poorly ventilated car park and explode once the lower explosion limit is reached.&amp;lt;ref name=&amp;quot;VdG-27&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 27.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flammable gases also arise from processes. In nuclear power plants the most common is hydrogen, used to cool generators and released in battery rooms.&amp;lt;ref name=&amp;quot;IS-1-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 1-8.&amp;lt;/ref&amp;gt; In electric vehicles, a battery in thermal runaway can release flammable gases. Ignited, they can cause a flare fire or a gas cloud explosion.&amp;lt;ref name=&amp;quot;VdG-22&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 22.&amp;lt;/ref&amp;gt; If they are not ignited at once, they can accumulate in a confined or poorly ventilated car park and explode once the lower explosion limit is reached.&amp;lt;ref name=&amp;quot;VdG-27&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 27.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l82&quot;&gt;Line 82:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 84:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Calculation examples ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains the Division 2.2 nonflammable transport classification reported by the 2008 handbook.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flammable-gas-v1.svg|thumb|upright=1.5|alt=Horizontal bars from lower to upper flammable limit for eight gases, with a vertical line at 13 percent by volume.|Flammable ranges of eight gases in air. Under the US criteria described by Lemoff (2008), a gas meets the flammable-gas definition if its lower limit is at most 13 % or its range is at least 12 percentage points wide; anhydrous ammonia meets neither. Based on Lemoff (2008), pp. 6-165 and 6-174.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l106&quot;&gt;Line 106:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 109:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The mixing factor ranges from 0.2 for rooms ventilated only by infiltration through cracks to 0.9 for a perforated ceiling supply with several exhausts.&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-10.&amp;lt;/ref&amp;gt; As an assumed example, a room of 4 m × 4 m × 3 m (48 m³) has two air changes per hour, or 1.6 m³/min. A natural gas leak of 0.02 m³/min then gives a long-term modelled room concentration of 0.02/1.6 = 1.25 %. That is about 27 % of the lower limit of 4.7 %, so the calculated room concentration stays below that limit.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The concentration reaches one-fifth of the lower limit, 0.94 %, when 1 − e&amp;lt;sup&amp;gt;−&amp;#039;&amp;#039;KN&amp;#039;&amp;#039;&amp;lt;/sup&amp;gt; = 0.94/1.25 = 0.752. With perfect mixing (&amp;#039;&amp;#039;K&amp;#039;&amp;#039; = 1) this takes 1.39 air changes, or about 42 minutes.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The mixing factor ranges from 0.2 for rooms ventilated only by infiltration through cracks to 0.9 for a perforated ceiling supply with several exhausts.&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-10.&amp;lt;/ref&amp;gt; As an assumed example, a room of 4 m × 4 m × 3 m (48 m³) has two air changes per hour, or 1.6 m³/min. A natural gas leak of 0.02 m³/min then gives a long-term modelled room concentration of 0.02/1.6 = 1.25 %. That is about 27 % of the lower limit of 4.7 %, so the calculated room concentration stays below that limit.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The concentration reaches one-fifth of the lower limit, 0.94 %, when 1 − e&amp;lt;sup&amp;gt;−&amp;#039;&amp;#039;KN&amp;#039;&amp;#039;&amp;lt;/sup&amp;gt; = 0.94/1.25 = 0.752. With perfect mixing (&amp;#039;&amp;#039;K&amp;#039;&amp;#039; = 1) this takes 1.39 air changes, or about 42 minutes.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flammable-gas-v4.svg|thumb|upright=1.5|alt=Two rising curves of gas concentration against time levelling off at 1.25 percent, with a dashed line at 0.94 percent.|Modelled concentration in a 48 m³ room with two air changes per hour after a natural gas leak of 0.02 m³/min starts, for perfect mixing (K = 1) and K = 0.2, with the NFPA 69 method. Based on Iqbal and Salley (2004), p. 16-9.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The same leak of propane would reach 58 % of its lower limit of 2.15 %.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; In this room, a propane leak of about 0.034 m³/min would bring the modelled room concentration to the lower limit; at 21 °C and 101 kPa this is roughly 3.8 kg/h. Real rooms are not perfectly mixed, and the handbook warns that practical ventilation systems can handle only rather nominal release rates.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; A layer or pocket near the leak can therefore be flammable even while the modelled room concentration remains below the lower limit.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The same leak of propane would reach 58 % of its lower limit of 2.15 %.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; In this room, a propane leak of about 0.034 m³/min would bring the modelled room concentration to the lower limit; at 21 °C and 101 kPa this is roughly 3.8 kg/h. Real rooms are not perfectly mixed, and the handbook warns that practical ventilation systems can handle only rather nominal release rates.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; A layer or pocket near the leak can therefore be flammable even while the modelled room concentration remains below the lower limit.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4485:rev-4563:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Lisa</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4485&amp;oldid=prev</id>
		<title>Linda: Make illustration attribution more concise and less prominent</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4485&amp;oldid=prev"/>
		<updated>2026-11-08T06:52:38Z</updated>

		<summary type="html">&lt;p&gt;Make illustration attribution more concise and less prominent&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 07:52, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l71&quot;&gt;Line 71:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 71:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;AI-generated illustration: &lt;/del&gt;Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;AI-generated illustration: &lt;/del&gt;Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester. Based on Cholin (2008a), p. 14-103.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester. Based on Cholin (2008a), p. 14-103. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;small&amp;gt;(AI illustration)&amp;lt;/small&amp;gt;&lt;/ins&gt;]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4454:rev-4485:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4454&amp;oldid=prev</id>
		<title>Linda: Add Fire Safety Academy watermarked AI illustration at the location specified in the visual plan</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4454&amp;oldid=prev"/>
		<updated>2026-11-08T06:50:23Z</updated>

		<summary type="html">&lt;p&gt;Add Fire Safety Academy watermarked AI illustration at the location specified in the visual plan&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 07:50, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l70&quot;&gt;Line 70:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 70:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] can warn of a leak below the lower flammable limit if its sensors are suitably placed, maintained and set to respond in time.&amp;lt;ref name=&amp;quot;C-14-107&amp;quot;&amp;gt;Cholin (2008a), p. 14-107.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;C-14-108&amp;quot;&amp;gt;Cholin (2008a), p. 14-108.&amp;lt;/ref&amp;gt; In the 2008 handbook, Cholin notes that, apart from the then-existing NFPA 720 for carbon monoxide, no NFPA standard covered the design of combustible-gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; The handbook says most catalytic-bead systems need monthly calibration, usually with a test gas at 50 % LFL; the specific system instructions govern maintenance.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flammable-gas-v5.jpg|thumb|upright=1.5|alt=AI-generated illustration: Fixed gas detector head with a metal sensor housing mounted on a wall near gas piping.|AI-generated illustration: Fixed flammable gas detector. In an ordinary gas-air atmosphere, a sintered-metal flame arrester around a catalytic sensor prevents flame from propagating outside the detector; oxygen-enriched atmospheres may require a special arrester. Based on Cholin (2008a), p. 14-103.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55 as described by Lemoff and Rivkin (2008) requires separation of relevant flammable, oxidising, corrosive, toxic, pyrophoric and unstable reactive gas classes.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; In the 2008 handbook account, indoor storage of more than about 70.8 m³ (2500 standard cubic feet) of flammable gas requires separation into groups of cylinders or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For larger containers of liquefied flammable gas that is not chemically self-reactive, the 2008 handbook cites NFPA 15 water-spray protection against failure. It gives a density in excess of 0.25 gpm/ft² (about 10.2 L/(min·m²)) over the container surface.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4226:rev-4454:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4226&amp;oldid=prev</id>
		<title>Peter: FSE wiki: Fact-check: clarify ignition, historical classifications, detection and storage scope; correct ventilation example (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=4226&amp;oldid=prev"/>
		<updated>2026-11-08T00:14:29Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Fact-check: clarify ignition, historical classifications, detection and storage scope; correct ventilation example (written by Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;amp;diff=4226&amp;amp;oldid=3295&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=3295&amp;oldid=prev</id>
		<title>Peter: FSE wiki: SI values converted from the US customary originals (414-758 kPa, 3.45-6.89 kPa, 70.8 m3, 10.2 L/min/m2) instead of the handbook&#039;s printed conversions (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=3295&amp;oldid=prev"/>
		<updated>2026-11-07T21:18:32Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: SI values converted from the US customary originals (414-758 kPa, 3.45-6.89 kPa, 70.8 m3, 10.2 L/min/m2) instead of the handbook&amp;#039;s printed conversions (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 22:18, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l47&quot;&gt;Line 47:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 47:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Gases expand when heated, so a fire raises the container pressure. This can open a pressure-relief valve or cause the container to fail, and a heated container can also lose its strength.&amp;lt;ref name=&amp;quot;L-6-168&amp;quot; /&amp;gt; Container failure releases the energy stored by compression or liquefaction, often extremely rapidly and violently.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot;&amp;gt;Lemoff (2008), p. 6-169.&amp;lt;/ref&amp;gt; Failures of compressed gas containers are marked mainly by flying fragments. Liquefied gas containers hold far more gas and can release larger quantities.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Gases expand when heated, so a fire raises the container pressure. This can open a pressure-relief valve or cause the container to fail, and a heated container can also lose its strength.&amp;lt;ref name=&amp;quot;L-6-168&amp;quot; /&amp;gt; Container failure releases the energy stored by compression or liquefaction, often extremely rapidly and violently.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot;&amp;gt;Lemoff (2008), p. 6-169.&amp;lt;/ref&amp;gt; Failures of compressed gas containers are marked mainly by flying fragments. Liquefied gas containers hold far more gas and can release larger quantities.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Liquefied flammable gases such as [[liquefied petroleum gas]] add the hazard of the boiling liquid expanding vapour explosion (BLEVE). When such a container fails, about one-third of the liquid can turn to vapour at normal temperatures, and often more than half in a fire.&amp;lt;ref name=&quot;L-6-170&quot;&amp;gt;Lemoff (2008), pp. 6-170–6-171.&amp;lt;/ref&amp;gt; Container pieces can be thrown up to about 0.8 km, and fatal burns have occurred up to 76 m from larger containers.&amp;lt;ref name=&quot;L-6-172&quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In the LP-gas disaster near Mexico City on 19 November 1984, about 15 BLEVEs were recorded, and some 500 deaths were reported.&amp;lt;ref name=&quot;L-6-172&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Liquefied flammable gases such as [[liquefied petroleum gas]] add the hazard of the boiling liquid expanding vapour explosion (BLEVE). When such a container fails, about one-third of the liquid can turn to vapour at normal temperatures, and often more than half in a fire.&amp;lt;ref name=&quot;L-6-170&quot;&amp;gt;Lemoff (2008), pp. 6-170–6-171.&amp;lt;/ref&amp;gt; Container pieces can be thrown up to about 0.8 km &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;(½ mile)&lt;/ins&gt;, and fatal burns have occurred up to 76 m from larger containers.&amp;lt;ref name=&quot;L-6-172&quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In the LP-gas disaster near Mexico City on 19 November 1984, about 15 BLEVEs were recorded, and some 500 deaths were reported.&amp;lt;ref name=&quot;L-6-172&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A flammable gas can also burn inside a container. Gas–air or gas–oxygen mixtures are seldom made in containers on purpose but can form by accident, for example in piping that carries both oxygen and a fuel gas for cutting and welding. Oxygen–fuel gas cutting systems therefore have special backflow prevention devices.&amp;lt;ref name=&amp;quot;L-6-173&amp;quot;&amp;gt;Lemoff (2008), p. 6-173.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A flammable gas can also burn inside a container. Gas–air or gas–oxygen mixtures are seldom made in containers on purpose but can form by accident, for example in piping that carries both oxygen and a fuel gas for cutting and welding. Oxygen–fuel gas cutting systems therefore have special backflow prevention devices.&amp;lt;ref name=&amp;quot;L-6-173&amp;quot;&amp;gt;Lemoff (2008), p. 6-173.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l54&quot;&gt;Line 54:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 54:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook describes a combustion explosion as a sequence of events. The gas escapes, mixes with air and forms an ignitable mixture within its flammable range. Once ignited, the mixture burns rapidly and heats the surrounding air, which expands.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; If the air is confined in a room, the pressure rises until some part of the structure gives way.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The handbook also calls this a room explosion or vapour–air explosion, but notes that these names are less accurate.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook describes a combustion explosion as a sequence of events. The gas escapes, mixes with air and forms an ignitable mixture within its flammable range. Once ignited, the mixture burns rapidly and heats the surrounding air, which expands.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; If the air is confined in a room, the pressure rises until some part of the structure gives way.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The handbook also calls this a room explosion or vapour–air explosion, but notes that these names are less accurate.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;400 &lt;/del&gt;to &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;750 &lt;/del&gt;kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Conventional structures withstand only about 3.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;5 &lt;/del&gt;to &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;7&lt;/del&gt;.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0 &lt;/del&gt;kPa (0.5 to 1.0 psi).&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;414 &lt;/ins&gt;to &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;758 &lt;/ins&gt;kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Conventional structures withstand only about 3.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;45 &lt;/ins&gt;to &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;89 &lt;/ins&gt;kPa (0.5 to 1.0 psi).&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l71&quot;&gt;Line 71:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 71:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] provides warning before a mixture becomes flammable. The handbook notes that, apart from NFPA 720 for carbon monoxide, no NFPA standard covered the design of flammable gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; Such systems usually need monthly calibration with a test gas, typically at 50 % LFL.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A [[gas detection system]] provides warning before a mixture becomes flammable. The handbook notes that, apart from NFPA 720 for carbon monoxide, no NFPA standard covered the design of flammable gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; Such systems usually need monthly calibration with a test gas, typically at 50 % LFL.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&quot;LR-7-38&quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55, as described by Lemoff and Rivkin (2008), requires separation of flammable, oxidising, toxic, pyrophoric and unstable reactive gases.&amp;lt;ref name=&quot;LR-7-38&quot; /&amp;gt; Indoor storage of more than about &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;71 &lt;/del&gt;m³ (2500 standard cubic feet) of flammable gas needs separation into groups or sprinkler protection.&amp;lt;ref name=&quot;LR-7-40&quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For large containers of liquefied flammable gas, NFPA 15 requires water spray at more than 10 (L/min)/m² of container surface to prevent failure.&amp;lt;ref name=&quot;LR-7-40&quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&quot;LR-7-38&quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55, as described by Lemoff and Rivkin (2008), requires separation of flammable, oxidising, toxic, pyrophoric and unstable reactive gases.&amp;lt;ref name=&quot;LR-7-38&quot; /&amp;gt; Indoor storage of more than about &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;70.8 &lt;/ins&gt;m³ (2500 standard cubic feet) of flammable gas needs separation into groups or sprinkler protection.&amp;lt;ref name=&quot;LR-7-40&quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For large containers of liquefied flammable gas, NFPA 15 requires water spray at more than 10&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.2 &lt;/ins&gt;(L/min)/m² &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;(0.25 gpm/ft²) &lt;/ins&gt;of container surface to prevent failure.&amp;lt;ref name=&quot;LR-7-40&quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency control ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Emergency control ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l111&quot;&gt;Line 111:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 111:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\frac{P - P_0}{P_\mathrm{m} - P_0} = \frac{m_\mathrm{b}}{m_0}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\frac{P - P_0}{P_\mathrm{m} - P_0} = \frac{m_\mathrm{b}}{m_0}&amp;lt;/math&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Here &#039;&#039;P&#039;&#039; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is the pressure rise, &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the closed-vessel deflagration pressure, &#039;&#039;m&#039;&#039;&amp;lt;sub&amp;gt;b&amp;lt;/sub&amp;gt; the burned mass and &#039;&#039;m&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the total mass in the enclosure. For propane–air, &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is 7.9 bar.&amp;lt;ref name=&quot;Z02-407&quot;&amp;gt;Zalosh (2002), p. 3-407.&amp;lt;/ref&amp;gt; A stoichiometric mixture has almost the density of air, so the mass fraction is close to the volume fraction of the room that the mixture fills.&amp;lt;ref name=&quot;Z02-410&quot;&amp;gt;Zalosh (2002), p. 3-410.&amp;lt;/ref&amp;gt; A pocket filling only 1 % of the room would then raise the pressure by about 7.9 kPa if no venting occurred. That exceeds the 3.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;5 &lt;/del&gt;to &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;7&lt;/del&gt;.&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;0 &lt;/del&gt;kPa that conventional structures withstand, which agrees with the handbook statement on partly filled rooms.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Here &#039;&#039;P&#039;&#039; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is the pressure rise, &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the closed-vessel deflagration pressure, &#039;&#039;m&#039;&#039;&amp;lt;sub&amp;gt;b&amp;lt;/sub&amp;gt; the burned mass and &#039;&#039;m&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the total mass in the enclosure. For propane–air, &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &#039;&#039;P&#039;&#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is 7.9 bar.&amp;lt;ref name=&quot;Z02-407&quot;&amp;gt;Zalosh (2002), p. 3-407.&amp;lt;/ref&amp;gt; A stoichiometric mixture has almost the density of air, so the mass fraction is close to the volume fraction of the room that the mixture fills.&amp;lt;ref name=&quot;Z02-410&quot;&amp;gt;Zalosh (2002), p. 3-410.&amp;lt;/ref&amp;gt; A pocket filling only 1 % of the room would then raise the pressure by about 7.9 kPa if no venting occurred. That exceeds the 3.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;45 &lt;/ins&gt;to &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;6&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;89 &lt;/ins&gt;kPa that conventional structures withstand, which agrees with the handbook statement on partly filled rooms.&amp;lt;ref name=&quot;L-6-175&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Limitations and uncertainty ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Limitations and uncertainty ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3087:rev-3295:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=3087&amp;oldid=prev</id>
		<title>Peter: New FSE wiki article: Flammable gas (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flammable_gas&amp;diff=3087&amp;oldid=prev"/>
		<updated>2026-11-07T21:08:22Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Flammable gas (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;flammable gas&amp;#039;&amp;#039;&amp;#039; is a substance that is a gas at normal temperature and pressure and that burns when mixed with air in the right proportions.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot;&amp;gt;Lemoff (2008), p. 6-165.&amp;lt;/ref&amp;gt; In the United States, the formal definition in NFPA 55 and in the transport regulations of the Department of Transportation (DOT) rests on two tests. The gas must be ignitable in a mixture of 13 % or less by volume with air, or have a flammable range in air at least 12 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;L-6-166&amp;quot;&amp;gt;Lemoff (2008), p. 6-166.&amp;lt;/ref&amp;gt; Common examples are natural gas, propane, butane, hydrogen, acetylene and ethylene.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot;&amp;gt;Lemoff (2008), p. 6-174, Table 6.10.3.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Unlike a flammable liquid, a flammable gas does not first have to evaporate, so it can always ignite once it is released and mixed with air.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; distinguishes two basic hazards of a release: a combustion explosion inside a building or structure, and a fire.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; An enclosure that is only partly filled with a flammable mixture can already be destroyed, because ordinary structures withstand only a few kilopascals.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot;&amp;gt;Lemoff (2008), p. 6-175.&amp;lt;/ref&amp;gt; Outdoors, a release can burn as a jet flame, as a flash fire through a drifting cloud, or as a vapour cloud explosion.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot;&amp;gt;Beyler (2002a), p. 3-269.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot;&amp;gt;Zalosh (2008), p. 2-104.&amp;lt;/ref&amp;gt; Protection relies on tight containment, odorisation, ventilation, control of ignition sources, gas detection and water cooling of exposed containers.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;L-6-176&amp;quot;&amp;gt;Lemoff (2008), p. 6-176.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Definition and classification ==&lt;br /&gt;
The handbook chapter on gases uses the term gas only for substances that are gaseous at normal temperature and pressure (NTP), about 21 °C (70 °F) and 101 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; In the United States, NFPA 55, as described in the 2008 edition of the &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;, is the standard for the storage, use and handling of compressed gases. It defines a flammable gas as a material that is a gas at 20 °C (68 °F) or less at 101.325 kPa.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; It must also be ignitable at that pressure in a mixture of 13 % or less by volume with air, or have a flammable range with air of at least 12 %, regardless of the lower limit.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt; A flammable liquefied gas is a liquefied compressed gas that is partly liquid at 20 °C in its charged container and that is flammable.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Lemoff notes that these definitions are the same as those of the DOT regulations, and therefore identical to those used for labelling gases in transport in the United States.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; They are also essentially identical to the United Nations protocols for international gas shipments.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; In the DOT hazard classes, flammable gases form Division 2.1, with propane, butadiene, acetylene and methyl chloride as examples.&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot;&amp;gt;C. J. Wright (2008a), pp. 13-119–13-120.&amp;lt;/ref&amp;gt; In the 2007 edition of NFPA 704, the highest flammability rating, 4, covers materials that turn rapidly or completely into vapour at atmospheric pressure and normal ambient temperature and burn readily.&amp;lt;ref name=&amp;quot;CJW-13-123&amp;quot;&amp;gt;C. J. Wright (2008a), p. 13-123.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
NFPA 55 places flammable gases among the physical-hazard classes, next to nonflammable, oxidising, pyrophoric and unstable reactive gases.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Pyrophoric gases are flammable gases that ignite spontaneously in air, such as silane and phosphine, and are found mostly in semiconductor manufacturing.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Some gases that can be made to burn are still treated as nonflammable because their range is narrow or their lower limit high. Anhydrous ammonia is the standard example: the DOT classifies it as a nonflammable gas for interstate transport.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The flash point, which is central to the classification of flammable liquids, has no practical meaning for flammable gases.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; A flammable gas normally exists above its boiling point, even when it is stored as a liquid, and therefore always above its flash point.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; By usage, the most widely used fuel gases are natural gas and the liquefied petroleum gases butane and propane.&amp;lt;ref name=&amp;quot;L-6-168&amp;quot;&amp;gt;Lemoff (2008), p. 6-168.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Combustion properties ==&lt;br /&gt;
&amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039; explains that a flammable gas burns only when it mixes with oxygen in the right proportion and enough energy is available to ignite the mixture.&amp;lt;ref name=&amp;quot;VR-3.1&amp;quot;&amp;gt;Van Rossum (2027), §3.1.&amp;lt;/ref&amp;gt; The ideal proportion is the stoichiometric ratio, and the further a mixture departs from it, the more slowly it burns.&amp;lt;ref name=&amp;quot;VR-3.3&amp;quot;&amp;gt;Van Rossum (2027), §3.3.&amp;lt;/ref&amp;gt; The stoichiometric fuel fraction in air is 0.095 for methane, 0.040 for propane and 0.296 for hydrogen.&amp;lt;ref name=&amp;quot;Z08-2-98&amp;quot;&amp;gt;Zalosh (2008), p. 2-98.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Every flammable gas has a lower and an upper flammable limit. A mixture with air ignites only between these [[flammability limits]], and only when at least the [[minimum ignition energy]] is supplied.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; The SFPE Handbook defines the limits as the range of compositions within which a premixed flame can propagate, at a specified temperature and pressure.&amp;lt;ref name=&amp;quot;By-2-172&amp;quot;&amp;gt;Beyler (2002b), p. 2-172.&amp;lt;/ref&amp;gt; For most simple hydrocarbons, the limits in air correspond to equivalence ratios of about 0.5 and 3.&amp;lt;ref name=&amp;quot;By-2-172&amp;quot; /&amp;gt; Adding oxygen raises the upper limit but hardly changes the lower limit, and both limits widen as the temperature rises.&amp;lt;ref name=&amp;quot;By-2-174&amp;quot;&amp;gt;Beyler (2002b), pp. 2-173–2-174.&amp;lt;/ref&amp;gt; The lower limit is insensitive to pressure except well below atmospheric, while the upper limit rises above atmospheric pressure.&amp;lt;ref name=&amp;quot;By-2-174&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The table below gives the combustion properties of common flammable gases from the handbook. The specific gravity compares the density of the gas with that of air.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
|+ Combustion properties of common flammable gases&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt;&lt;br /&gt;
! Gas !! Lower limit (vol %) !! Upper limit (vol %) !! Specific gravity (air = 1) !! Ignition temperature (°C)&lt;br /&gt;
|-&lt;br /&gt;
| Natural gas (high methane type) || 4.7 || 15.0 || 0.590–0.614 || 482–632&lt;br /&gt;
|-&lt;br /&gt;
| Propane (commercial) || 2.15 || 9.6 || 1.52 || 493–604&lt;br /&gt;
|-&lt;br /&gt;
| Butane (commercial) || 1.9 || 8.5 || 2.0 || 482–538&lt;br /&gt;
|-&lt;br /&gt;
| Acetylene || 2.5 || 81.0 || 0.91 || 305&lt;br /&gt;
|-&lt;br /&gt;
| Hydrogen || 4.0 || 75.0 || 0.07 || 500&lt;br /&gt;
|-&lt;br /&gt;
| Ethylene || 2.7 || 36.0 || 0.98 || 490&lt;br /&gt;
|-&lt;br /&gt;
| Carbon monoxide || 12.5 || 74.0 || 0.97 || 609&lt;br /&gt;
|-&lt;br /&gt;
| Anhydrous ammonia || 16.0 || 25.0 || 0.60 || 651&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Ignition energies differ by orders of magnitude. In dry air at 1 atm and 25 °C, the minimum ignition energy is 0.016 mJ for hydrogen and 0.017 mJ for acetylene. Methane needs 0.21 mJ and propane 0.24 mJ, while ammonia needs 680 mJ.&amp;lt;ref name=&amp;quot;Br-17-147&amp;quot;&amp;gt;Britton (1999), as cited in Ural and Garzia (2008), p. 17-147.&amp;lt;/ref&amp;gt; Hydrogen also has an extremely wide flammable range and the highest burning velocity of any gas, and it burns with a nearly invisible flame.&amp;lt;ref name=&amp;quot;L-6-181&amp;quot;&amp;gt;Lemoff (2008), pp. 6-181–6-182.&amp;lt;/ref&amp;gt; Ethylene combines a wide flammable range with a high burning velocity.&amp;lt;ref name=&amp;quot;L-6-180&amp;quot;&amp;gt;Lemoff (2008), pp. 6-180–6-181.&amp;lt;/ref&amp;gt; Ammonia, by contrast, owes its limited flammability to its high lower limit and low heat of combustion.&amp;lt;ref name=&amp;quot;L-6-178&amp;quot;&amp;gt;Lemoff (2008), pp. 6-178–6-179.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Gas concentrations are usually expressed as a percentage of the lower flammable limit (% LFL). For a gas with a lower limit of 4.0 %, a reading of 25 % LFL means 1 % gas by volume in the sample.&amp;lt;ref name=&amp;quot;C-14-100&amp;quot;&amp;gt;Cholin (2008a), p. 14-100.&amp;lt;/ref&amp;gt; The older terms lower and upper explosive limit (LEL and UEL) are still found in the literature for the same concentrations.&amp;lt;ref name=&amp;quot;C-14-100&amp;quot; /&amp;gt; NUREG-1805 states that the terms explosive limits and flammable limits are used interchangeably.&amp;lt;ref name=&amp;quot;IS-B-25&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-25.&amp;lt;/ref&amp;gt; Lemoff, however, notes that hydrogen has a recognised explosive range that is narrower than its flammable range. He recommends that the term explosive range be used only for hydrogen.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Hazards in containers ==&lt;br /&gt;
Gases expand when heated, so a fire raises the container pressure. This can open a pressure-relief valve or cause the container to fail, and a heated container can also lose its strength.&amp;lt;ref name=&amp;quot;L-6-168&amp;quot; /&amp;gt; Container failure releases the energy stored by compression or liquefaction, often extremely rapidly and violently.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot;&amp;gt;Lemoff (2008), p. 6-169.&amp;lt;/ref&amp;gt; Failures of compressed gas containers are marked mainly by flying fragments. Liquefied gas containers hold far more gas and can release larger quantities.&amp;lt;ref name=&amp;quot;L-6-169&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Liquefied flammable gases such as [[liquefied petroleum gas]] add the hazard of the boiling liquid expanding vapour explosion (BLEVE). When such a container fails, about one-third of the liquid can turn to vapour at normal temperatures, and often more than half in a fire.&amp;lt;ref name=&amp;quot;L-6-170&amp;quot;&amp;gt;Lemoff (2008), pp. 6-170–6-171.&amp;lt;/ref&amp;gt; Container pieces can be thrown up to about 0.8 km, and fatal burns have occurred up to 76 m from larger containers.&amp;lt;ref name=&amp;quot;L-6-172&amp;quot;&amp;gt;Lemoff (2008), p. 6-172.&amp;lt;/ref&amp;gt; In the LP-gas disaster near Mexico City on 19 November 1984, about 15 BLEVEs were recorded, and some 500 deaths were reported.&amp;lt;ref name=&amp;quot;L-6-172&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A flammable gas can also burn inside a container. Gas–air or gas–oxygen mixtures are seldom made in containers on purpose but can form by accident, for example in piping that carries both oxygen and a fuel gas for cutting and welding. Oxygen–fuel gas cutting systems therefore have special backflow prevention devices.&amp;lt;ref name=&amp;quot;L-6-173&amp;quot;&amp;gt;Lemoff (2008), p. 6-173.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Hazards after release ==&lt;br /&gt;
The handbook describes a combustion explosion as a sequence of events. The gas escapes, mixes with air and forms an ignitable mixture within its flammable range. Once ignited, the mixture burns rapidly and heats the surrounding air, which expands.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; If the air is confined in a room, the pressure rises until some part of the structure gives way.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The handbook also calls this a room explosion or vapour–air explosion, but notes that these names are less accurate.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The vulnerability of buildings follows from two numbers. An enclosure completely filled with a flammable gas–air mixture would have to withstand about 400 to 750 kPa (60 to 110 psi) to stay intact.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Conventional structures withstand only about 3.5 to 7.0 kPa (0.5 to 1.0 psi).&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Most combustion explosions in conventional structures therefore occur with less than 25 % of the enclosure occupied by the flammable mixture.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Because most flammable mixtures are about 90 % air, whether the gas is lighter or heavier than air matters less inside structures than might be expected.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Lemoff describes a gas fire as an aborted combustion explosion. The mixture ignites before an explosive quantity can accumulate, or there is no structure to confine it.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Outdoors, fires are therefore more likely than explosions. After a massive release, however, the surrounding air or buildings can provide enough confinement for an open-air explosion.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Liquefied noncryogenic gases, hydrogen, ethylene and some reactive gases with a high flame speed are subject to this.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A leak from a pressurised pipe or hose can form a gas jet that is easily ignited into a large turbulent flame.&amp;lt;ref name=&amp;quot;A-2-21&amp;quot;&amp;gt;Alpert (2008), p. 2-21.&amp;lt;/ref&amp;gt; The fuel flow of such a [[jet fire]] is set by the leak orifice rather than by heat transfer from the flame.&amp;lt;ref name=&amp;quot;A-2-21&amp;quot; /&amp;gt; Near or within the flames, its radiation can reach 120 to 160 kW/m².&amp;lt;ref name=&amp;quot;A-2-22&amp;quot;&amp;gt;Alpert (2008), p. 2-22.&amp;lt;/ref&amp;gt; Where jet flames engulf a target, the SFPE Handbook reports heat fluxes of up to 250 kW/m² for two-phase LPG jets and 300 kW/m² for sonic natural gas jets.&amp;lt;ref name=&amp;quot;By-3-302&amp;quot;&amp;gt;Cowley and Prichard (1990), as cited in Beyler (2002a), p. 3-302.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
If the release is not ignited at once, a cloud forms and drifts downwind. A remote ignition source can then ignite it, producing a vapour cloud fire, or [[flash fire]], that burns back towards the release point.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; The burning cloud can then start a steady jet flame or pool fire at the source.&amp;lt;ref name=&amp;quot;By-3-269&amp;quot; /&amp;gt; Where the cloud is large and the flame accelerates, a [[vapour cloud explosion]] can follow. Turbulent jet releases, partial confinement, congested equipment and ignition delays all promote the rapid flame speeds involved.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Damaging overpressures in a virtually unconfined cloud need flame speeds of the order of 100 m/s.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt; Propane, propylene, ethylene and aromatic hydrocarbons have been involved in many such explosions.&amp;lt;ref name=&amp;quot;Z08-2-104&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Flammable gases also arise from processes. In nuclear power plants the most common is hydrogen, used to cool generators and released in battery rooms.&amp;lt;ref name=&amp;quot;IS-1-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 1-8.&amp;lt;/ref&amp;gt; In electric vehicles, a battery in thermal runaway can release flammable gases. Ignited, they can cause a flare fire or a gas cloud explosion.&amp;lt;ref name=&amp;quot;VdG-22&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 22.&amp;lt;/ref&amp;gt; If they are not ignited at once, they can accumulate in a confined or poorly ventilated car park and explode once the lower explosion limit is reached.&amp;lt;ref name=&amp;quot;VdG-27&amp;quot;&amp;gt;Van der Graaf et al. (2021/2023), p. 27.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Prevention and protection ==&lt;br /&gt;
The basic safeguards against a combustion explosion limit the formation of a flammable mixture in a structure. They include rugged containers and equipment, emergency flow-control devices and limiting orifices.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Burners are often fitted with flame-failure devices that shut off the gas if the flame goes out.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Many gases are colourless and odourless. Codes, standards and regulations therefore require natural gas and LP-gas to be odorised, so that people with a normal sense of smell can detect them at one-fifth of the lower limit.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; Odorisation has limits: nobody may be present, the sense of smell tires and varies, and some soils scrub the odorant from leaking underground gas.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Control of ignition sources is the second line of defence, but it is practical mainly in industrial operations.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; In the United States, flammable gas storage areas without filling operations are generally classified as Division 2 locations for electrical equipment.&amp;lt;ref name=&amp;quot;LR-7-41&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-41.&amp;lt;/ref&amp;gt; Gases are assigned to groups by testing the gap through which a flame can pass, and most flammable gases fall in Groups C and D.&amp;lt;ref name=&amp;quot;LR-7-41&amp;quot; /&amp;gt; Acetylene is the only Group A gas and hydrogen is Group B.&amp;lt;ref name=&amp;quot;LR-7-41&amp;quot; /&amp;gt; NUREG-1805 lists ethylene as a Group C and propane as a Group D example.&amp;lt;ref name=&amp;quot;IS-B-24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; A gas leak can also create its own ignition source. Gases such as natural gas, methane, ethane and propane are dielectrics, and flow from a high-pressure leak can build up static charges that discharge as sparks.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot;&amp;gt;Cholin (2008a), p. 14-109.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A [[gas detection system]] provides warning before a mixture becomes flammable. The handbook notes that, apart from NFPA 720 for carbon monoxide, no NFPA standard covered the design of flammable gas detection in commercial or industrial occupancies.&amp;lt;ref name=&amp;quot;C-14-99&amp;quot;&amp;gt;Cholin (2008a), p. 14-99.&amp;lt;/ref&amp;gt; Common sensors use a catalytic bead on which the gas burns, giving a signal in proportion to its concentration.&amp;lt;ref name=&amp;quot;C-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt; Such systems usually need monthly calibration with a test gas, typically at 50 % LFL.&amp;lt;ref name=&amp;quot;C-14-109&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In storage, containers of flammable gases should not be kept with oxidising gases such as oxygen and nitrous oxide. These increase the speed of burning and allow explosions of fuel–oxidant mixtures.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-38.&amp;lt;/ref&amp;gt; In the United States, NFPA 55, as described by Lemoff and Rivkin (2008), requires separation of flammable, oxidising, toxic, pyrophoric and unstable reactive gases.&amp;lt;ref name=&amp;quot;LR-7-38&amp;quot; /&amp;gt; Indoor storage of more than about 71 m³ (2500 standard cubic feet) of flammable gas needs separation into groups or sprinkler protection.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot;&amp;gt;Lemoff and Rivkin (2008), p. 7-40.&amp;lt;/ref&amp;gt; For large containers of liquefied flammable gas, NFPA 15 requires water spray at more than 10 (L/min)/m² of container surface to prevent failure.&amp;lt;ref name=&amp;quot;LR-7-40&amp;quot; /&amp;gt; Deflagration venting according to [[NFPA 68]] can limit explosion damage, but is applied to industrial structures rather than ordinary buildings.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Emergency control ==&lt;br /&gt;
The handbook separates &amp;quot;no fire&amp;quot; and &amp;quot;fire&amp;quot; emergencies.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; In a no-fire emergency the gas is directed, diluted and dispersed with a carrier fluid, while the flow is stopped where possible.&amp;lt;ref name=&amp;quot;L-6-176&amp;quot; /&amp;gt; Liquefied gases are visible as a fog of condensed water vapour, but ignitable mixtures often extend some distance beyond it.&amp;lt;ref name=&amp;quot;L-6-176&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
In a fire emergency, water is applied to control the heat while the gas flow is stopped if possible.&amp;lt;ref name=&amp;quot;L-6-176&amp;quot; /&amp;gt; Many gas fires can be put out with carbon dioxide, dry chemical or halogenated agents. If gas keeps escaping after extinguishment, however, the fire can turn into a combustion explosion. Accepted practice is therefore to extinguish only small leaks that would be harmless if they reignited.&amp;lt;ref name=&amp;quot;L-6-176&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Calculation examples ==&lt;br /&gt;
Two simple checks follow from the definitions and data above. The first applies the two tests of the NFPA 55 and DOT definition to the gases in the table. Natural gas, propane and butane meet the first test, with lower limits below 13 %, but their ranges are only 6.6 to 10.3 percentage points wide.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Hydrogen, acetylene, ethylene and carbon monoxide pass both tests.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Blast furnace gas, with a lower limit of 33.2 %, passes only through its range of 38 points.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Anhydrous ammonia fails both: its lower limit of 16 % exceeds 13 %, and its range of 9 points is less than 12. This explains why the DOT lists it as a nonflammable gas in Division 2.2.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;CJW-13-119&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The second check estimates how a steady leak builds up in a ventilated room. NUREG-1805 gives the method of NFPA 69 for a constant gas source in an enclosed volume.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-9.&amp;lt;/ref&amp;gt; The concentration approaches the ratio of the gas release rate to the ventilation rate, at a speed set by the number of air changes:&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;C = \frac{G}{Q} \left( 1 - e^{-KN} \right), \qquad N = \frac{Q \, t}{V}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;C&amp;lt;/math&amp;gt; || average gas concentration by volume || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;G&amp;lt;/math&amp;gt; || gas release rate || m³/min&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;Q&amp;lt;/math&amp;gt; || ventilation air flow rate || m³/min&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;K&amp;lt;/math&amp;gt; || mixing efficiency factor (1.0 for perfect mixing) || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;N&amp;lt;/math&amp;gt; || number of theoretical air changes || –&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;t&amp;lt;/math&amp;gt; || time since the start of the leak || min&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;V&amp;lt;/math&amp;gt; || room volume || m³&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The mixing factor ranges from 0.2 for rooms ventilated only by infiltration through cracks to 0.9 for a perforated ceiling supply with several exhausts.&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 16-10.&amp;lt;/ref&amp;gt; As an assumed example, a room of 4 m × 4 m × 3 m (48 m³) has two air changes per hour, or 1.6 m³/min. A natural gas leak of 0.02 m³/min then gives a long-term average concentration of 0.02/1.6 = 1.25 %. That is 27 % of the lower limit of 4.7 %, so a perfectly mixed room never becomes flammable.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The concentration reaches one-fifth of the lower limit, 0.94 %, when 1 − e&amp;lt;sup&amp;gt;−&amp;#039;&amp;#039;KN&amp;#039;&amp;#039;&amp;lt;/sup&amp;gt; = 0.75. With perfect mixing (&amp;#039;&amp;#039;K&amp;#039;&amp;#039; = 1) this takes 1.39 air changes, or about 41 minutes.&lt;br /&gt;
&lt;br /&gt;
The same leak of propane would reach 58 % of its lower limit of 2.15 %.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; In this room, a propane leak of about 0.034 m³/min, or 3.7 kg/h, would bring the average concentration to the lower limit. Real rooms are not perfectly mixed, and the handbook warns that practical ventilation systems can handle only rather nominal release rates.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt; A layer or pocket near the leak can therefore be flammable long before the average is.&lt;br /&gt;
&lt;br /&gt;
The SFPE Handbook gives a simple estimate of what such a pocket can do. The pressure rise in a closed enclosure is the closed-vessel pressure multiplied by the fraction of the total mass that burns:&amp;lt;ref name=&amp;quot;Z02-408&amp;quot;&amp;gt;Zalosh (2002), p. 3-408.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;\frac{P - P_0}{P_\mathrm{m} - P_0} = \frac{m_\mathrm{b}}{m_0}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Here &amp;#039;&amp;#039;P&amp;#039;&amp;#039; − &amp;#039;&amp;#039;P&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is the pressure rise, &amp;#039;&amp;#039;P&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &amp;#039;&amp;#039;P&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the closed-vessel deflagration pressure, &amp;#039;&amp;#039;m&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;b&amp;lt;/sub&amp;gt; the burned mass and &amp;#039;&amp;#039;m&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; the total mass in the enclosure. For propane–air, &amp;#039;&amp;#039;P&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;m&amp;lt;/sub&amp;gt; − &amp;#039;&amp;#039;P&amp;#039;&amp;#039;&amp;lt;sub&amp;gt;0&amp;lt;/sub&amp;gt; is 7.9 bar.&amp;lt;ref name=&amp;quot;Z02-407&amp;quot;&amp;gt;Zalosh (2002), p. 3-407.&amp;lt;/ref&amp;gt; A stoichiometric mixture has almost the density of air, so the mass fraction is close to the volume fraction of the room that the mixture fills.&amp;lt;ref name=&amp;quot;Z02-410&amp;quot;&amp;gt;Zalosh (2002), p. 3-410.&amp;lt;/ref&amp;gt; A pocket filling only 1 % of the room would then raise the pressure by about 7.9 kPa if no venting occurred. That exceeds the 3.5 to 7.0 kPa that conventional structures withstand, which agrees with the handbook statement on partly filled rooms.&amp;lt;ref name=&amp;quot;L-6-175&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limitations and uncertainty ==&lt;br /&gt;
The definitions in this article are American and international transport definitions as described in the 2008 &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039;.&amp;lt;ref name=&amp;quot;L-6-165&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; Other codes and regulations use somewhat different descriptions of related terms such as compressed gas and liquefied gas.&amp;lt;ref name=&amp;quot;L-6-167&amp;quot;&amp;gt;Lemoff (2008), p. 6-167.&amp;lt;/ref&amp;gt; The handbook itself notes that a gas such as ammonia can burn and yet be classified as nonflammable for transport.&amp;lt;ref name=&amp;quot;L-6-166&amp;quot; /&amp;gt; A classification is therefore a regulatory label, and it does not mean that a gas cannot burn or explode in an enclosure.&amp;lt;ref name=&amp;quot;L-6-179&amp;quot;&amp;gt;Lemoff (2008), p. 6-179.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Tabulated limits depend on the test method. Beyler gives 5 % and 15 % by volume for methane in air, while the handbook table gives 4.7 % and 15.0 % for high-methane natural gas.&amp;lt;ref name=&amp;quot;By-2-172&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; The standard Bureau of Mines method uses a vertical tube 1.5 m long and 0.05 m wide, and limits for downward propagation are narrower than for upward propagation.&amp;lt;ref name=&amp;quot;By-2-172&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;By-2-174&amp;quot; /&amp;gt; Commercial propane and butane are mixtures, and natural gas compositions vary, so the limits of a real gas can differ from those in a table.&amp;lt;ref name=&amp;quot;L-6-174&amp;quot; /&amp;gt; Limits also widen with temperature and, for the upper limit, with pressure and oxygen content.&amp;lt;ref name=&amp;quot;By-2-174&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The calculation methods above are first-order approximations. The NFPA 69 buildup equation gives an average concentration and assumes a constant leak and a fixed mixing factor.&amp;lt;ref name=&amp;quot;IS-16-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IS-16-10&amp;quot; /&amp;gt; The partial-volume estimate ignores venting through windows and doors and assumes that the burned mixture is stoichiometric.&amp;lt;ref name=&amp;quot;Z02-408&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Acetylene]]&lt;br /&gt;
* [[Aerosol product]]&lt;br /&gt;
* [[Natural gas]]&lt;br /&gt;
* [[Silane]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Alpert, R. L. (2008). Physics of fire configuration. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-21–2-29). National Fire Protection Association.&lt;br /&gt;
* Beyler, C. L. (2002a). Fire hazard calculations for large, open hydrocarbon fires. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-268–3-314). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Beyler, C. L. (2002b). Flammability limits of premixed and diffusion flames. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-172–2-187). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Cholin, J. M. (2008a). Gas and vapor detection systems and monitors. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 14-99–14-112). National Fire Protection Association.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Lemoff, T. C. (2008). Gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-165–6-186). National Fire Protection Association.&lt;br /&gt;
* Lemoff, T. C., &amp;amp; Rivkin, C. H. (2008). Storage of gases. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-35–7-42). National Fire Protection Association.&lt;br /&gt;
* Ural, E. A., &amp;amp; Garzia, H. W. (2008). Explosion prevention and protection. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 17-141–17-165). National Fire Protection Association.&lt;br /&gt;
* Van der Graaf, J., Hessels, T., &amp;amp; Rosmuller, N. (2023). &amp;#039;&amp;#039;Fire safety of indoor car parks accommodating electrically powered vehicles&amp;#039;&amp;#039;. Nederlands Instituut Publieke Veiligheid. (Original work published 2021)&lt;br /&gt;
* Van Rossum, E. (2027). &amp;#039;&amp;#039;Introduction to Fire Safety Engineering&amp;#039;&amp;#039;. Fire Safety Academy.&lt;br /&gt;
* Wright, C. J. (2008a). Managing the response to hazardous material incidents. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 13-117–13-144). National Fire Protection Association.&lt;br /&gt;
* Zalosh, R. (2002). Explosion protection. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-402–3-421). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Zalosh, R. (2008). Explosions. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-93–2-106). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Hazardous Materials]]&lt;/div&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
</feed>