<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Flame_arrester</id>
	<title>Flame arrester - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Flame_arrester"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;action=history"/>
	<updated>2026-11-21T23:35:30Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=9194&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 5 errors: typo (5) (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=9194&amp;oldid=prev"/>
		<updated>2026-11-15T23:35:18Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 5 errors: typo (5) (Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 00:35, 16 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;flame arrester&amp;#039;&amp;#039;&amp;#039; is a device that stops a flame from passing through a flammable gas-air mixture. It does so by quenching the flame on the surfaces of an array of small passages, and the gases that emerge are cooled enough not to ignite the mixture on the protected side.&amp;lt;ref name=&amp;quot;IS-F30&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-30.&amp;lt;/ref&amp;gt; Unlike active isolation systems, which act only after an explosion has been detected, flame arresters are passive devices: the gas flow itself passes through narrow channels in which a flame is quenched.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-158.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt; They are used on the vents of tanks for flammable liquids, on process vents and pipelines, on small containers and inside gas detectors.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot;&amp;gt;Ordile (2008), p. 7-19.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Scarbrough-9-33&amp;quot;&amp;gt;Scarbrough (2008b), p. 9-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;flame arrester&amp;#039;&amp;#039;&amp;#039; is a device that stops a flame from passing through a flammable gas-air mixture. It does so by quenching the flame on the surfaces of an array of small passages, and the gases that emerge are cooled enough not to ignite the mixture on the protected side.&amp;lt;ref name=&amp;quot;IS-F30&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-30.&amp;lt;/ref&amp;gt; Unlike active isolation systems, which act only after an explosion has been detected, flame arresters are passive devices: the gas flow itself passes through narrow channels in which a flame is quenched.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-158.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt; They are used on the vents of tanks for flammable liquids, on process vents and pipelines, on small containers and inside gas detectors.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot;&amp;gt;Ordile (2008), p. 7-19.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Scarbrough-9-33&amp;quot;&amp;gt;Scarbrough (2008b), p. 9-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The principle rests on the quenching distance of a mixture, the largest gap through which a flame cannot propagate.&amp;lt;ref name=&quot;Simmons-1-147&quot;&amp;gt;Simmons (2002), p. 1-147.&amp;lt;/ref&amp;gt; An arrester at the end of a vent pipe, close to the likely ignition source, meets the flame before it can accelerate. One mounted inside a long pipe may face an accelerating [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Deflagration&lt;/del&gt;]] or even a [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Detonation&lt;/del&gt;]], and needs special design and testing.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt; Arresters are suitable for gases and vapours, not for dusts or saturated vapours, and they can fail when they are clogged, damaged or heated by a long-burning flame.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&amp;lt;ref name=&quot;Ordile-7-19&quot; /&amp;gt; In the language of explosion protection, the flame arrester is one of the passive methods of [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Explosion &lt;/del&gt;isolation]].&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The principle rests on the quenching distance of a mixture, the largest gap through which a flame cannot propagate.&amp;lt;ref name=&quot;Simmons-1-147&quot;&amp;gt;Simmons (2002), p. 1-147.&amp;lt;/ref&amp;gt; An arrester at the end of a vent pipe, close to the likely ignition source, meets the flame before it can accelerate. One mounted inside a long pipe may face an accelerating [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;deflagration&lt;/ins&gt;]] or even a [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;detonation&lt;/ins&gt;]], and needs special design and testing.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt; Arresters are suitable for gases and vapours, not for dusts or saturated vapours, and they can fail when they are clogged, damaged or heated by a long-burning flame.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&amp;lt;ref name=&quot;Ordile-7-19&quot; /&amp;gt; In the language of explosion protection, the flame arrester is one of the passive methods of [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;explosion &lt;/ins&gt;isolation]].&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Principle: quenching in narrow passages ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Principle: quenching in narrow passages ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l53&quot;&gt;Line 53:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 53:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;This steady phase does not last if the hot products cannot vent. They push the flame and the unburnt gas forward, which creates turbulence ahead of the flame and raises the burning velocity further.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Turbulence can roughly double the burning velocity of propane, ethene and acetylene flames at a Reynolds number of 40,000, and theory suggests a factor of five at very high turbulence.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt; In a long enough duct, the flame front acts as an accelerating piston, a shock wave forms, and the flame becomes a detonation travelling at typically 1500 to 3000 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For gases initially at atmospheric pressure, the pressure behind the detonation can reach 20 bar, and up to 100 bar where it reflects from the end of the duct.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;This steady phase does not last if the hot products cannot vent. They push the flame and the unburnt gas forward, which creates turbulence ahead of the flame and raises the burning velocity further.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Turbulence can roughly double the burning velocity of propane, ethene and acetylene flames at a Reynolds number of 40,000, and theory suggests a factor of five at very high turbulence.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt; In a long enough duct, the flame front acts as an accelerating piston, a shock wave forms, and the flame becomes a detonation travelling at typically 1500 to 3000 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For gases initially at atmospheric pressure, the pressure behind the detonation can reach 20 bar, and up to 100 bar where it reflects from the end of the duct.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ural and Garzia (2008) describe the same chain for process plants. A pipe that carries a flammable mixture can act as a fuse: ignition at one end can send a flame through the pipe to a process unit at the other end.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt; The flame speeds up steadily unless it is blocked near the point of ignition. In the detonable range the front can undergo [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Deflagration&lt;/del&gt;-to-detonation transition]], with pressures of about 25 times the initial pressure and reflected pressures up to 50 times.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ural and Garzia (2008) describe the same chain for process plants. A pipe that carries a flammable mixture can act as a fuse: ignition at one end can send a flame through the pipe to a process unit at the other end.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt; The flame speeds up steadily unless it is blocked near the point of ignition. In the detonable range the front can undergo [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;deflagration&lt;/ins&gt;-to-detonation transition]], with pressures of about 25 times the initial pressure and reflected pressures up to 50 times.&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a pipe initially at 101 kPa, these factors mean about 2.5 MPa and 5.1 MPa absolute.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; These values are of the same order as the 20 bar and 100 bar given by Simmons (2002), although the reflected values differ by a factor of two.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Zalosh (2008) adds that most accidental explosions are deflagrations, but that detonations can follow a strong ignition source, an elongated or obstructed geometry, or very high turbulence.&amp;lt;ref name=&amp;quot;Zalosh-2-100&amp;quot;&amp;gt;Zalosh (2008), p. 2-100.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a pipe initially at 101 kPa, these factors mean about 2.5 MPa and 5.1 MPa absolute.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; These values are of the same order as the 20 bar and 100 bar given by Simmons (2002), although the reflected values differ by a factor of two.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Zalosh (2008) adds that most accidental explosions are deflagrations, but that detonations can follow a strong ignition source, an elongated or obstructed geometry, or very high turbulence.&amp;lt;ref name=&amp;quot;Zalosh-2-100&amp;quot;&amp;gt;Zalosh (2008), p. 2-100.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l72&quot;&gt;Line 72:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 72:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The main use is on the vents of tanks for flammable liquids. In US practice described by Ordile (2008), every tank needs a vent for filling, emptying and thermal expansion and contraction; API Standard 2000 gives the design basis. Alternatively, the normal vent should be at least as large as the largest fill or withdrawal connection, and never less than 32 mm (1.25 in.).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; Approved pressure-vacuum (breather) vent valves or flame arresters on the vent pipes prevent flashback into the tank. These devices are required when a flammable mixture is present and for the storage of all Class I liquids.&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; NFPA 30, as summarised in the 2008 handbook, also requires normally closed vents for Class IA liquids, with a flash point below 73 °F (22.8 °C) and a boiling point below 100 °F (38 °C).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The main use is on the vents of tanks for flammable liquids. In US practice described by Ordile (2008), every tank needs a vent for filling, emptying and thermal expansion and contraction; API Standard 2000 gives the design basis. Alternatively, the normal vent should be at least as large as the largest fill or withdrawal connection, and never less than 32 mm (1.25 in.).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; Approved pressure-vacuum (breather) vent valves or flame arresters on the vent pipes prevent flashback into the tank. These devices are required when a flammable mixture is present and for the storage of all Class I liquids.&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; NFPA 30, as summarised in the 2008 handbook, also requires normally closed vents for Class IA liquids, with a flash point below 73 °F (22.8 °C) and a boiling point below 100 °F (38 °C).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;On an [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Atmospheric &lt;/del&gt;storage tank]] that holds a liquid whose flash point lies in the range of normal summer temperatures, the vapour space normally contains a flammable mixture. Flame arresters have their most important application on such tanks.&amp;lt;ref name=&quot;Ordile-7-19&quot; /&amp;gt; Lightning protection guidance in the same handbook lists, among its conditions for metal tanks of flammable liquids, that all vapour openings are closed or fitted with flame arresters for Class I liquids.&amp;lt;ref name=&quot;Caloggero-11-78&quot;&amp;gt;Caloggero (2008), p. 11-78.&amp;lt;/ref&amp;gt; More generally, Benedetti (2008) names safe venting of storage tanks, and flame arresters that guard against flame travelling into the storage, among the design means for flammable liquid storage.&amp;lt;ref name=&quot;Benedetti-6-7&quot;&amp;gt;Benedetti (2008), p. 6-7.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;On an [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;atmospheric &lt;/ins&gt;storage tank]] that holds a liquid whose flash point lies in the range of normal summer temperatures, the vapour space normally contains a flammable mixture. Flame arresters have their most important application on such tanks.&amp;lt;ref name=&quot;Ordile-7-19&quot; /&amp;gt; Lightning protection guidance in the same handbook lists, among its conditions for metal tanks of flammable liquids, that all vapour openings are closed or fitted with flame arresters for Class I liquids.&amp;lt;ref name=&quot;Caloggero-11-78&quot;&amp;gt;Caloggero (2008), p. 11-78.&amp;lt;/ref&amp;gt; More generally, Benedetti (2008) names safe venting of storage tanks, and flame arresters that guard against flame travelling into the storage, among the design means for flammable liquid storage.&amp;lt;ref name=&quot;Benedetti-6-7&quot;&amp;gt;Benedetti (2008), p. 6-7.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Smaller containers use the same idea. Scarbrough (2008b) describes the practice in spray finishing. Flammable liquid containers of more than 19 L (5 gal) kept indoors should have a special plug that combines a pressure relief valve, a vacuum relief valve and a flame arrester.&amp;lt;ref name=&quot;Scarbrough-9-33&quot; /&amp;gt; Containers of coating materials near process areas should have pressure relief devices and flame arresters at all openings.&amp;lt;ref name=&quot;Scarbrough-9-33&quot; /&amp;gt; For small quantities the handbook prefers the [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Safety &lt;/del&gt;can]], whose spring-closed caps prevent spills and act as an emergency vent in a fire.&amp;lt;ref name=&quot;Ordile-7-31&quot;&amp;gt;Ordile (2008), p. 7-31.&amp;lt;/ref&amp;gt; Process tanks for dipping are drawn with a vent fitted with a flame arrester.&amp;lt;ref name=&quot;Katunar-9-40&quot;&amp;gt;Katunar (2008), p. 9-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Smaller containers use the same idea. Scarbrough (2008b) describes the practice in spray finishing. Flammable liquid containers of more than 19 L (5 gal) kept indoors should have a special plug that combines a pressure relief valve, a vacuum relief valve and a flame arrester.&amp;lt;ref name=&quot;Scarbrough-9-33&quot; /&amp;gt; Containers of coating materials near process areas should have pressure relief devices and flame arresters at all openings.&amp;lt;ref name=&quot;Scarbrough-9-33&quot; /&amp;gt; For small quantities the handbook prefers the [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;safety &lt;/ins&gt;can]], whose spring-closed caps prevent spills and act as an emergency vent in a fire.&amp;lt;ref name=&quot;Ordile-7-31&quot;&amp;gt;Ordile (2008), p. 7-31.&amp;lt;/ref&amp;gt; Process tanks for dipping are drawn with a vent fitted with a flame arrester.&amp;lt;ref name=&quot;Katunar-9-40&quot;&amp;gt;Katunar (2008), p. 9-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Other uses are found in engines, boats and process plants. Arcing electrical parts of stationary combustion engines that pump or compress flammable liquids or gases should be safeguarded by flashover shielding, flame arresters, purging or ventilation.&amp;lt;ref name=&amp;quot;Biggins-8-107&amp;quot;&amp;gt;Biggins (2008), p. 8-107.&amp;lt;/ref&amp;gt; On US boats with gasoline engines, as described by Eberly (2008), backfire flame arresters are still required, although they no longer need a US Coast Guard approval number.&amp;lt;ref name=&amp;quot;Eberly-21-156&amp;quot;&amp;gt;Eberly (2008), p. 21-156.&amp;lt;/ref&amp;gt; A backfire arrester in fully premixed air-fuel gas piping stops flame propagation, shuts off the fuel and relieves the pressure of a backfire.&amp;lt;ref name=&amp;quot;IS-F7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-7.&amp;lt;/ref&amp;gt; In oilseed solvent extraction plants, the absorber vent discharges to the atmosphere through a flame arrester.&amp;lt;ref name=&amp;quot;Kingsbaker-9-135&amp;quot;&amp;gt;Kingsbaker (2008), p. 9-135.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Other uses are found in engines, boats and process plants. Arcing electrical parts of stationary combustion engines that pump or compress flammable liquids or gases should be safeguarded by flashover shielding, flame arresters, purging or ventilation.&amp;lt;ref name=&amp;quot;Biggins-8-107&amp;quot;&amp;gt;Biggins (2008), p. 8-107.&amp;lt;/ref&amp;gt; On US boats with gasoline engines, as described by Eberly (2008), backfire flame arresters are still required, although they no longer need a US Coast Guard approval number.&amp;lt;ref name=&amp;quot;Eberly-21-156&amp;quot;&amp;gt;Eberly (2008), p. 21-156.&amp;lt;/ref&amp;gt; A backfire arrester in fully premixed air-fuel gas piping stops flame propagation, shuts off the fuel and relieves the pressure of a backfire.&amp;lt;ref name=&amp;quot;IS-F7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-7.&amp;lt;/ref&amp;gt; In oilseed solvent extraction plants, the absorber vent discharges to the atmosphere through a flame arrester.&amp;lt;ref name=&amp;quot;Kingsbaker-9-135&amp;quot;&amp;gt;Kingsbaker (2008), p. 9-135.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5521:rev-9194:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=5521&amp;oldid=prev</id>
		<title>Emma: Add SVG figures fse-flame-arrester-v1.svg, fse-flame-arrester-v2.svg, fse-flame-arrester-v3.svg, fse-flame-arrester-v4.svg (list-2 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=5521&amp;oldid=prev"/>
		<updated>2026-11-09T08:04:32Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-flame-arrester-v1.svg, fse-flame-arrester-v2.svg, fse-flame-arrester-v3.svg, fse-flame-arrester-v4.svg (list-2 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 09:04, 9 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l7&quot;&gt;Line 7:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 7:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flame arresters, called flame traps by Simmons (2002), use this effect. Stopping the flame front is not enough, however: any hot gas forced through the trap must also be cooled enough not to ignite a flammable mixture on the far side.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Beyler (2002b) makes the same point for enclosures, noting that hot quenched flame gases that expand through an opening may autoignite outside.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot;&amp;gt;Beyler (2002b), p. 2-182.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Flame arresters, called flame traps by Simmons (2002), use this effect. Stopping the flame front is not enough, however: any hot gas forced through the trap must also be cooled enough not to ignite a flammable mixture on the far side.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Beyler (2002b) makes the same point for enclosures, noting that hot quenched flame gases that expand through an opening may autoignite outside.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot;&amp;gt;Beyler (2002b), p. 2-182.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flame-arrester-v1.svg|thumb|upright=1.5|alt=Flame front entering a bank of narrow metal channels, losing heat to the walls and going out, with cool gas leaving the other side|A flame entering the narrow passages of an arrester loses heat and free radicals to the walls and is quenched; the gas leaving is too cool to ignite the protected side.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; describes the practical form: the gas flow is made to pass through small passageways, so that flame propagation is prevented by thermal quenching.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In plate and tube arresters, heat from the outside flame is absorbed by the metal, which quenches the flame and prevents ignition of the vapours inside a tank.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; The same quenching idea also governs explosion-proof enclosures for electrical equipment. Their joints are made narrow enough that a flame inside loses sufficient heat in the opening to be quenched.&amp;lt;ref name=&amp;quot;Beyler-2-181&amp;quot;&amp;gt;Beyler (2002b), p. 2-181.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; describes the practical form: the gas flow is made to pass through small passageways, so that flame propagation is prevented by thermal quenching.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In plate and tube arresters, heat from the outside flame is absorbed by the metal, which quenches the flame and prevents ignition of the vapours inside a tank.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; The same quenching idea also governs explosion-proof enclosures for electrical equipment. Their joints are made narrow enough that a flame inside loses sufficient heat in the opening to be quenched.&amp;lt;ref name=&amp;quot;Beyler-2-181&amp;quot;&amp;gt;Beyler (2002b), p. 2-181.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l28&quot;&gt;Line 28:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 29:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The MESG is also used to group flammable gases. NUREG-1805 classifies gases by MESG, determined by IEC test 79-1A (1975). It lists acetylene in Group A, hydrogen in Group B, ethylene in Group C and propane in Group D, citing Senecal (1997).&amp;lt;ref name=&amp;quot;IS-B24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; Hydrogen and acetylene also burn much faster than propane: their maximum laminar burning velocities in air are 320 and 175 cm/s, against 68 cm/s for ethene and 41 cm/s for propane.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot;&amp;gt;Simmons (2002), p. 1-146.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The MESG is also used to group flammable gases. NUREG-1805 classifies gases by MESG, determined by IEC test 79-1A (1975). It lists acetylene in Group A, hydrogen in Group B, ethylene in Group C and propane in Group D, citing Senecal (1997).&amp;lt;ref name=&amp;quot;IS-B24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; Hydrogen and acetylene also burn much faster than propane: their maximum laminar burning velocities in air are 320 and 175 cm/s, against 68 cm/s for ethene and 41 cm/s for propane.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot;&amp;gt;Simmons (2002), p. 1-146.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flame-arrester-v2.svg|thumb|upright=1.5|alt=Log-log line of minimum ignition energy against parallel-plate quenching distance with a marked point for methane|Minimum ignition energy against parallel-plate quenching distance for hydrocarbon-air mixtures, E = 0.06 d², with the methane example (0.3 mJ, 2.2 mm, MESG about 1.1 mm).]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Flame propagation in pipes ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Flame propagation in pipes ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l47&quot;&gt;Line 47:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 49:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Because the flame front is always larger than the duct cross-section, typically by a factor of two or three, the flame travels faster than the burning velocity.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For a propane-air mixture with a maximum laminar burning velocity of 41 cm/s, the initial flame speed is therefore about 0.8 to 1.2 m/s. For hydrogen-air, at 320 cm/s, it is about 6.4 to 9.6 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Because the flame front is always larger than the duct cross-section, typically by a factor of two or three, the flame travels faster than the burning velocity.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For a propane-air mixture with a maximum laminar burning velocity of 41 cm/s, the initial flame speed is therefore about 0.8 to 1.2 m/s. For hydrogen-air, at 320 cm/s, it is about 6.4 to 9.6 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flame-arrester-v3.svg|thumb|upright=1.5|alt=Long pipe with ignition at one end and stages from slow flame to turbulent flame to detonation, with arrester positions marked|Flame acceleration in a pipe: about 1 m/s at first for propane-air, then turbulent acceleration and possibly a detonation at 1500 to 3000 m/s.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;This steady phase does not last if the hot products cannot vent. They push the flame and the unburnt gas forward, which creates turbulence ahead of the flame and raises the burning velocity further.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Turbulence can roughly double the burning velocity of propane, ethene and acetylene flames at a Reynolds number of 40,000, and theory suggests a factor of five at very high turbulence.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt; In a long enough duct, the flame front acts as an accelerating piston, a shock wave forms, and the flame becomes a detonation travelling at typically 1500 to 3000 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For gases initially at atmospheric pressure, the pressure behind the detonation can reach 20 bar, and up to 100 bar where it reflects from the end of the duct.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;This steady phase does not last if the hot products cannot vent. They push the flame and the unburnt gas forward, which creates turbulence ahead of the flame and raises the burning velocity further.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Turbulence can roughly double the burning velocity of propane, ethene and acetylene flames at a Reynolds number of 40,000, and theory suggests a factor of five at very high turbulence.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt; In a long enough duct, the flame front acts as an accelerating piston, a shock wave forms, and the flame becomes a detonation travelling at typically 1500 to 3000 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For gases initially at atmospheric pressure, the pressure behind the detonation can reach 20 bar, and up to 100 bar where it reflects from the end of the duct.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l62&quot;&gt;Line 62:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 65:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A hydraulic arrester passes the gas through a liquid, which breaks the flow into single bubbles that rise by buoyancy. Because the bubbles are isolated, no continuous channel exists through which a flame can pass.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-160.&amp;lt;/ref&amp;gt; The device blocks a flame that starts on the side where the bubbles reach the liquid surface, which is the usual direction of use. For ignition on the upstream side, the protection is less effective, because combustion can be transferred to the surface of the liquid.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot; /&amp;gt; Designs include bubble-screen and sparge-tube vessels with instruments for gas flow, liquid level and temperature.&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A hydraulic arrester passes the gas through a liquid, which breaks the flow into single bubbles that rise by buoyancy. Because the bubbles are isolated, no continuous channel exists through which a flame can pass.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-160.&amp;lt;/ref&amp;gt; The device blocks a flame that starts on the side where the bubbles reach the liquid surface, which is the usual direction of use. For ignition on the upstream side, the protection is less effective, because combustion can be transferred to the surface of the liquid.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot; /&amp;gt; Designs include bubble-screen and sparge-tube vessels with instruments for gas flow, liquid level and temperature.&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-flame-arrester-v4.svg|thumb|upright=1.5|alt=Tank with end-of-line and in-line flame arresters on its vent pipe, next to a vessel in which gas bubbles rise through a liquid seal|Arrester types: dry arresters at the end of a tank vent or in the vent line, and a hydraulic arrester that breaks the gas into isolated bubbles.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;By position, arresters are of the end-of-line type, at the outlet of a vent pipe, or the in-line type, mounted within the pipe.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Flame arresters are normally placed at the end of a pipeline near a possible ignition source. Arresters intended for use at a significant distance from the pipe end, such as in-line units, are subject to special requirements, and NFPA 69 contains requirements for their installation.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The US Coast Guard set test requirements for arresters in mid-pipe positions that may be challenged by a detonation, and these were adopted in ANSI/UL 525, &amp;#039;&amp;#039;Standard for Safety Flame Arresters&amp;#039;&amp;#039;.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-165&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-165.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;By position, arresters are of the end-of-line type, at the outlet of a vent pipe, or the in-line type, mounted within the pipe.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Flame arresters are normally placed at the end of a pipeline near a possible ignition source. Arresters intended for use at a significant distance from the pipe end, such as in-line units, are subject to special requirements, and NFPA 69 contains requirements for their installation.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The US Coast Guard set test requirements for arresters in mid-pipe positions that may be challenged by a detonation, and these were adopted in ANSI/UL 525, &amp;#039;&amp;#039;Standard for Safety Flame Arresters&amp;#039;&amp;#039;.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-165&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-165.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4165:rev-5521:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Emma</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=4165&amp;oldid=prev</id>
		<title>Jan: NFPA wiki: fact-check corrections (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=4165&amp;oldid=prev"/>
		<updated>2026-11-07T22:25:15Z</updated>

		<summary type="html">&lt;p&gt;NFPA wiki: fact-check corrections (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 23:25, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;flame arrester&#039;&#039;&#039; is a device that stops a flame from passing through a flammable gas-air mixture. It does so by quenching the flame on the surfaces of an array of small passages, and the gases that emerge are cooled enough not to ignite the mixture on the protected side.&amp;lt;ref name=&quot;IS-F30&quot;&amp;gt;Iqbal and Salley (2004), p. F-30.&amp;lt;/ref&amp;gt; Unlike active isolation systems, which act only after an explosion has been detected, flame arresters are passive devices: the gas flow itself passes through narrow channels in which a flame is quenched.&amp;lt;ref name=&quot;UG-17-158&quot;&amp;gt;Ural and Garzia (2008), p. 17-158.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;UG-17-161&quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt; They are used on the vents of tanks for flammable liquids, on process vents and pipelines, on small containers and inside gas detectors.&amp;lt;ref name=&quot;Ordile-7-19&quot;&amp;gt;Ordile (2008), p. 7-19.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Cholin-14-103&quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Scarbrough-9-33&quot;&amp;gt;Scarbrough (2008b), p. 9-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;flame arrester&#039;&#039;&#039; is a device that stops a flame from passing through a flammable gas-air mixture. It does so by quenching the flame on the surfaces of an array of small passages, and the gases that emerge are cooled enough not to ignite the mixture on the protected side.&amp;lt;ref name=&quot;IS-F30&quot;&amp;gt;Iqbal and Salley (2004), p. F-30.&amp;lt;/ref&amp;gt; Unlike active isolation systems, which act only after an explosion has been detected, flame arresters are passive devices: the gas flow itself passes through narrow channels in which a flame is quenched.&amp;lt;ref name=&quot;UG-17-158&quot;&amp;gt;Ural and Garzia (2008), p. 17-158.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;UG-17-161&quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt; They are used on the vents of tanks for flammable liquids, on process vents and pipelines, on small containers and inside gas detectors.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/ins&gt;&amp;lt;ref name=&quot;Ordile-7-19&quot;&amp;gt;Ordile (2008), p. 7-19.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Cholin-14-103&quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Scarbrough-9-33&quot;&amp;gt;Scarbrough (2008b), p. 9-33.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The principle rests on the quenching distance of a mixture, the largest gap through which a flame cannot propagate.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot;&amp;gt;Simmons (2002), p. 1-147.&amp;lt;/ref&amp;gt; An arrester at the end of a vent pipe, close to the likely ignition source, meets the flame before it can accelerate. One mounted inside a long pipe may face an accelerating [[Deflagration]] or even a [[Detonation]], and needs special design and testing.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Arresters are suitable for gases and vapours, not for dusts or saturated vapours, and they can fail when they are clogged, damaged or heated by a long-burning flame.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; In the language of explosion protection, the flame arrester is one of the passive methods of [[Explosion isolation]].&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The principle rests on the quenching distance of a mixture, the largest gap through which a flame cannot propagate.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot;&amp;gt;Simmons (2002), p. 1-147.&amp;lt;/ref&amp;gt; An arrester at the end of a vent pipe, close to the likely ignition source, meets the flame before it can accelerate. One mounted inside a long pipe may face an accelerating [[Deflagration]] or even a [[Detonation]], and needs special design and testing.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Arresters are suitable for gases and vapours, not for dusts or saturated vapours, and they can fail when they are clogged, damaged or heated by a long-burning flame.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; In the language of explosion protection, the flame arrester is one of the passive methods of [[Explosion isolation]].&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l25&quot;&gt;Line 25:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 25:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The data behind the correlation cover minimum ignition energies from about 0.002 to 20 mJ and quenching distances from about 0.2 to 20 mm.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; It shows why a mixture that is easy to ignite is also hard to quench: a low ignition energy goes together with a small quenching distance. Beyler (2002b) adds that the maximum experimental safe gap (MESG) of most hydrocarbons is about half the quenching distance.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; The MESG is the gap through which a flame cannot pass, and it can be measured in a device such as the Westerberg explosion test vessel.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The data behind the correlation cover minimum ignition energies from about 0.002 to 20 mJ and quenching distances from about 0.2 to 20 mm.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; It shows why a mixture that is easy to ignite is also hard to quench: a low ignition energy goes together with a small quenching distance. Beyler (2002b) adds that the maximum experimental safe gap (MESG) of most hydrocarbons is about half the quenching distance.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; The MESG is the gap through which a flame cannot pass, and it can be measured in a device such as the Westerberg explosion test vessel.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&#039;&#039;&#039;Worked example.&#039;&#039;&#039; Methane can be ignited by as little as 0.3 mJ of electrical energy.&amp;lt;ref name=&quot;Moore-9-214&quot;&amp;gt;L. J. Moore (2008), p. 9-214.&amp;lt;/ref&amp;gt; The correlation then gives &amp;lt;math&amp;gt;d_\parallel = \sqrt{0.3/0.06} = 2.2&amp;lt;/math&amp;gt; mm between parallel plates. In a circular tube, the quenching diameter is &amp;lt;math&amp;gt;2.24/0.65 \approx 3.4&amp;lt;/math&amp;gt; mm, and the MESG is roughly half the parallel-plate value, about 1.1 mm. &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Passages that are to stop &lt;/del&gt;such a mixture &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;must therefore be about a millimetre wide or less&lt;/del&gt;. The correlation is approximate; for arresters, the handbook refers to test requirements such as those of ANSI/UL 525.&amp;lt;ref name=&quot;Beyler-2-182&quot; /&amp;gt;&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&#039;&#039;&#039;Worked example.&#039;&#039;&#039; Methane can be ignited by as little as 0.3 mJ of electrical energy.&amp;lt;ref name=&quot;Moore-9-214&quot;&amp;gt;L. J. Moore (2008), p. 9-214.&amp;lt;/ref&amp;gt; The correlation then gives &amp;lt;math&amp;gt;d_\parallel = \sqrt{0.3/0.06} = 2.2&amp;lt;/math&amp;gt; mm between parallel plates. In a circular tube, the quenching diameter is &amp;lt;math&amp;gt;2.24/0.65 \approx 3.4&amp;lt;/math&amp;gt; mm, and the MESG is roughly half the parallel-plate value, about 1.1 mm. &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;This suggests passages of the order of a millimetre for &lt;/ins&gt;such a mixture&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, although passage length also governs the performance of an arrester&lt;/ins&gt;.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;ref name=&quot;Ordile-7-19&quot; /&amp;gt; &lt;/ins&gt;The correlation is approximate; for arresters, the handbook refers to test requirements such as those of ANSI/UL 525.&amp;lt;ref name=&quot;Beyler-2-182&quot; /&amp;gt;&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The MESG is also used to group flammable gases. NUREG-1805 classifies gases by MESG, determined by IEC test 79-1A (1975). It lists acetylene in Group A, hydrogen in Group B, ethylene in Group C and propane in Group D, citing Senecal (1997).&amp;lt;ref name=&amp;quot;IS-B24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; Hydrogen and acetylene also burn much faster than propane: their maximum laminar burning velocities in air are 320 and 175 cm/s, against 68 cm/s for ethene and 41 cm/s for propane.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot;&amp;gt;Simmons (2002), p. 1-146.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The MESG is also used to group flammable gases. NUREG-1805 classifies gases by MESG, determined by IEC test 79-1A (1975). It lists acetylene in Group A, hydrogen in Group B, ethylene in Group C and propane in Group D, citing Senecal (1997).&amp;lt;ref name=&amp;quot;IS-B24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; Hydrogen and acetylene also burn much faster than propane: their maximum laminar burning velocities in air are 320 and 175 cm/s, against 68 cm/s for ethene and 41 cm/s for propane.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot;&amp;gt;Simmons (2002), p. 1-146.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l52&quot;&gt;Line 52:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 52:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ural and Garzia (2008) describe the same chain for process plants. A pipe that carries a flammable mixture can act as a fuse: ignition at one end can send a flame through the pipe to a process unit at the other end.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The flame speeds up steadily unless it is blocked near the point of ignition. In the detonable range the front can undergo [[Deflagration-to-detonation transition]], with pressures of about 25 times the initial pressure and reflected pressures up to 50 times.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Ural and Garzia (2008) describe the same chain for process plants. A pipe that carries a flammable mixture can act as a fuse: ignition at one end can send a flame through the pipe to a process unit at the other end.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The flame speeds up steadily unless it is blocked near the point of ignition. In the detonable range the front can undergo [[Deflagration-to-detonation transition]], with pressures of about 25 times the initial pressure and reflected pressures up to 50 times.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a pipe initially at 101 kPa, these factors mean about 2.5 MPa and 5.1 MPa absolute. These values are of the same order as the 20 bar and 100 bar given by Simmons (2002), although the reflected values differ by a factor of two. Zalosh (2008) adds that most accidental explosions are deflagrations, but that detonations can follow a strong ignition source, an elongated or obstructed geometry, or very high turbulence.&amp;lt;ref name=&quot;Zalosh-2-100&quot;&amp;gt;Zalosh (2008), p. 2-100.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;For a pipe initially at 101 kPa, these factors mean about 2.5 MPa and 5.1 MPa absolute.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;ref name=&quot;UG-17-158&quot; /&amp;gt; &lt;/ins&gt;These values are of the same order as the 20 bar and 100 bar given by Simmons (2002), although the reflected values differ by a factor of two.&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;lt;ref name=&quot;Simmons-1-147&quot; /&amp;gt; &lt;/ins&gt;Zalosh (2008) adds that most accidental explosions are deflagrations, but that detonations can follow a strong ignition source, an elongated or obstructed geometry, or very high turbulence.&amp;lt;ref name=&quot;Zalosh-2-100&quot;&amp;gt;Zalosh (2008), p. 2-100.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The difference matters for protection. In a deflagration the flame moves well below the speed of sound and the pressure rises almost uniformly; in a detonation the flame is supersonic and the pressure rises almost instantly behind a shock.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot;&amp;gt;Zalosh (2008), p. 2-99.&amp;lt;/ref&amp;gt; The Chapman-Jouguet detonation pressure is roughly twice the closed-vessel deflagration pressure, 16 to 20 atmospheres for a near-stoichiometric mixture at atmospheric pressure.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot; /&amp;gt; Explosion vents placed on a pipe can limit pressure and flame speed, yet the flame may still run through the whole length of pipe at moderate speed.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Pipeline detonations often cause periodic ruptures along the line, with each break acting as a pressure relief before the pressure builds up again.&amp;lt;ref name=&amp;quot;Zalosh-3-411&amp;quot;&amp;gt;Zalosh (2002), p. 3-411.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The difference matters for protection. In a deflagration the flame moves well below the speed of sound and the pressure rises almost uniformly; in a detonation the flame is supersonic and the pressure rises almost instantly behind a shock.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot;&amp;gt;Zalosh (2008), p. 2-99.&amp;lt;/ref&amp;gt; The Chapman-Jouguet detonation pressure is roughly twice the closed-vessel deflagration pressure, 16 to 20 atmospheres for a near-stoichiometric mixture at atmospheric pressure.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot; /&amp;gt; Explosion vents placed on a pipe can limit pressure and flame speed, yet the flame may still run through the whole length of pipe at moderate speed.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Pipeline detonations often cause periodic ruptures along the line, with each break acting as a pressure relief before the pressure builds up again.&amp;lt;ref name=&amp;quot;Zalosh-3-411&amp;quot;&amp;gt;Zalosh (2002), p. 3-411.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l77&quot;&gt;Line 77:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 77:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A flame arrester is only as good as its passages. Condensation, crystallisation of some liquids and freezing of moisture in winter can make conservation vents and flame arresters impractical, and steam tracing is sometimes provided to prevent this.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; If an arrester is exposed to a long-burning flame, the metal plates can become hot enough on the tank side to ignite the flammable vapour-air mixture inside.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Arresters are not suitable for dust or saturated vapour service.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In oxygen-enriched atmospheres, above 21 % oxygen by volume or an oxygen partial pressure above 21.27 kPa (160 mmHg), the arresters of gas sensors may need a special design.&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A flame arrester is only as good as its passages. Condensation, crystallisation of some liquids and freezing of moisture in winter can make conservation vents and flame arresters impractical, and steam tracing is sometimes provided to prevent this.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; If an arrester is exposed to a long-burning flame, the metal plates can become hot enough on the tank side to ignite the flammable vapour-air mixture inside.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Arresters are not suitable for dust or saturated vapour service.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In oxygen-enriched atmospheres, above 21 % oxygen by volume or an oxygen partial pressure above 21.27 kPa (160 mmHg), the arresters of gas sensors may need a special design.&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Arresters are not fitted everywhere. In oilseed extraction plants the discharge line &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;from relief valves &lt;/del&gt;to the atmosphere must not be fitted with a flame arrester.&amp;lt;ref name=&quot;Kingsbaker-9-135&quot; /&amp;gt; The handbook&#039;s comparison of isolation methods shows the trade-off. A flame arrester isolates a deflagration and an ignition source in gas service, but it does not provide flow or pressure isolation; a liquid seal behaves in the same way.&amp;lt;ref name=&quot;UG-17-159&quot;&amp;gt;Ural and Garzia (2008), p. 17-159.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Arresters are not fitted everywhere. In &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;US &lt;/ins&gt;oilseed extraction plants&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, NFPA 36 as described by Kingsbaker (2008) requires relief valves on &lt;/ins&gt;the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;extraction vessels, and their &lt;/ins&gt;discharge line to the atmosphere must not be fitted with a flame arrester.&amp;lt;ref name=&quot;Kingsbaker-9-135&quot; /&amp;gt; The handbook&#039;s comparison of isolation methods shows the trade-off. A flame arrester isolates a deflagration and an ignition source in gas service, but it does not provide flow or pressure isolation; a liquid seal behaves in the same way.&amp;lt;ref name=&quot;UG-17-159&quot;&amp;gt;Ural and Garzia (2008), p. 17-159.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The flame arrester is therefore one option among several. For dusts, or where pressure must also be stopped, Ural and Garzia (2008) describe rotary valves, flame front diverters, float valves and active systems with fast-acting valves or chemical barriers.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-159&amp;quot; /&amp;gt; Each of these isolation techniques has its own application limits.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The flame arrester is therefore one option among several. For dusts, or where pressure must also be stopped, Ural and Garzia (2008) describe rotary valves, flame front diverters, float valves and active systems with fast-acting valves or chemical barriers.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-159&amp;quot; /&amp;gt; Each of these isolation techniques has its own application limits.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3165:rev-4165:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Jan</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=3165&amp;oldid=prev</id>
		<title>Jan: New FSE wiki article: Flame arrester (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Flame_arrester&amp;diff=3165&amp;oldid=prev"/>
		<updated>2026-11-07T21:11:51Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Flame arrester (written by Claude Opus 5.5)&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;A &amp;#039;&amp;#039;&amp;#039;flame arrester&amp;#039;&amp;#039;&amp;#039; is a device that stops a flame from passing through a flammable gas-air mixture. It does so by quenching the flame on the surfaces of an array of small passages, and the gases that emerge are cooled enough not to ignite the mixture on the protected side.&amp;lt;ref name=&amp;quot;IS-F30&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-30.&amp;lt;/ref&amp;gt; Unlike active isolation systems, which act only after an explosion has been detected, flame arresters are passive devices: the gas flow itself passes through narrow channels in which a flame is quenched.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-158.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt; They are used on the vents of tanks for flammable liquids, on process vents and pipelines, on small containers and inside gas detectors.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot;&amp;gt;Ordile (2008), p. 7-19.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot;&amp;gt;Cholin (2008a), p. 14-103.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Scarbrough-9-33&amp;quot;&amp;gt;Scarbrough (2008b), p. 9-33.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The principle rests on the quenching distance of a mixture, the largest gap through which a flame cannot propagate.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot;&amp;gt;Simmons (2002), p. 1-147.&amp;lt;/ref&amp;gt; An arrester at the end of a vent pipe, close to the likely ignition source, meets the flame before it can accelerate. One mounted inside a long pipe may face an accelerating [[Deflagration]] or even a [[Detonation]], and needs special design and testing.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Arresters are suitable for gases and vapours, not for dusts or saturated vapours, and they can fail when they are clogged, damaged or heated by a long-burning flame.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; In the language of explosion protection, the flame arrester is one of the passive methods of [[Explosion isolation]].&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Principle: quenching in narrow passages ==&lt;br /&gt;
A flame that tries to pass through a gap that is too small is quenched. According to Simmons (2002), quenching is probably due to a combination of heat loss to the walls and the removal of the free radicals that the flame needs in order to propagate.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; The quenching distance is the largest gap that will just prevent propagation of a flame through the mixture. It is usually measured with spark ignition between a pair of parallel plates or with a rectangular burner.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Flame arresters, called flame traps by Simmons (2002), use this effect. Stopping the flame front is not enough, however: any hot gas forced through the trap must also be cooled enough not to ignite a flammable mixture on the far side.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Beyler (2002b) makes the same point for enclosures, noting that hot quenched flame gases that expand through an opening may autoignite outside.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot;&amp;gt;Beyler (2002b), p. 2-182.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; describes the practical form: the gas flow is made to pass through small passageways, so that flame propagation is prevented by thermal quenching.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In plate and tube arresters, heat from the outside flame is absorbed by the metal, which quenches the flame and prevents ignition of the vapours inside a tank.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; The same quenching idea also governs explosion-proof enclosures for electrical equipment. Their joints are made narrow enough that a flame inside loses sufficient heat in the opening to be quenched.&amp;lt;ref name=&amp;quot;Beyler-2-181&amp;quot;&amp;gt;Beyler (2002b), p. 2-181.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Quenching distance and safe gap ==&lt;br /&gt;
The quenching distance is often found by placing a pair of flanged electrodes in the gas mixture and trying to ignite it. If the mixture ignites, the plate separation is larger than the quenching distance.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; The quenching distance between parallel plates is 65 % of the quenching diameter in a circular tube.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; For a number of hydrocarbon-air mixtures, Beyler (2002b) relates the parallel-plate quenching distance to the minimum ignition energy with a simple correlation:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;E_\text{min} = 0.06\,d_\parallel^{2}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;E_\text{min}&amp;lt;/math&amp;gt; || Minimum spark ignition energy of the mixture in air || mJ&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;d_\parallel&amp;lt;/math&amp;gt; || Quenching distance between parallel plates, in air || mm&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
The data behind the correlation cover minimum ignition energies from about 0.002 to 20 mJ and quenching distances from about 0.2 to 20 mm.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; It shows why a mixture that is easy to ignite is also hard to quench: a low ignition energy goes together with a small quenching distance. Beyler (2002b) adds that the maximum experimental safe gap (MESG) of most hydrocarbons is about half the quenching distance.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt; The MESG is the gap through which a flame cannot pass, and it can be measured in a device such as the Westerberg explosion test vessel.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Worked example.&amp;#039;&amp;#039;&amp;#039; Methane can be ignited by as little as 0.3 mJ of electrical energy.&amp;lt;ref name=&amp;quot;Moore-9-214&amp;quot;&amp;gt;L. J. Moore (2008), p. 9-214.&amp;lt;/ref&amp;gt; The correlation then gives &amp;lt;math&amp;gt;d_\parallel = \sqrt{0.3/0.06} = 2.2&amp;lt;/math&amp;gt; mm between parallel plates. In a circular tube, the quenching diameter is &amp;lt;math&amp;gt;2.24/0.65 \approx 3.4&amp;lt;/math&amp;gt; mm, and the MESG is roughly half the parallel-plate value, about 1.1 mm. Passages that are to stop such a mixture must therefore be about a millimetre wide or less. The correlation is approximate; for arresters, the handbook refers to test requirements such as those of ANSI/UL 525.&amp;lt;ref name=&amp;quot;Beyler-2-182&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The MESG is also used to group flammable gases. NUREG-1805 classifies gases by MESG, determined by IEC test 79-1A (1975). It lists acetylene in Group A, hydrogen in Group B, ethylene in Group C and propane in Group D, citing Senecal (1997).&amp;lt;ref name=&amp;quot;IS-B24&amp;quot;&amp;gt;Iqbal and Salley (2004), p. B-24.&amp;lt;/ref&amp;gt; Hydrogen and acetylene also burn much faster than propane: their maximum laminar burning velocities in air are 320 and 175 cm/s, against 68 cm/s for ethene and 41 cm/s for propane.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot;&amp;gt;Simmons (2002), p. 1-146.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Flame propagation in pipes ==&lt;br /&gt;
The duty of an arrester depends on how fast the flame arrives. A flame moving along a duct away from an opening usually proceeds at first at a fairly uniform speed. This speed is controlled by the burning velocity of the mixture and the area of the flame front:&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;math display=&amp;quot;block&amp;quot;&amp;gt;V = \frac{S_u A_f}{A_d}&amp;lt;/math&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot;&lt;br /&gt;
! Symbol !! Description !! Unit&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;V&amp;lt;/math&amp;gt; || Linear speed of the flame along the duct || m/s&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;S_u&amp;lt;/math&amp;gt; || Burning velocity of the mixture, relative to the unburnt gas || m/s&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;A_f&amp;lt;/math&amp;gt; || Area of the flame front || m²&lt;br /&gt;
|-&lt;br /&gt;
| &amp;lt;math&amp;gt;A_d&amp;lt;/math&amp;gt; || Cross-sectional area of the duct || m²&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
Because the flame front is always larger than the duct cross-section, typically by a factor of two or three, the flame travels faster than the burning velocity.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For a propane-air mixture with a maximum laminar burning velocity of 41 cm/s, the initial flame speed is therefore about 0.8 to 1.2 m/s. For hydrogen-air, at 320 cm/s, it is about 6.4 to 9.6 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
This steady phase does not last if the hot products cannot vent. They push the flame and the unburnt gas forward, which creates turbulence ahead of the flame and raises the burning velocity further.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; Turbulence can roughly double the burning velocity of propane, ethene and acetylene flames at a Reynolds number of 40,000, and theory suggests a factor of five at very high turbulence.&amp;lt;ref name=&amp;quot;Simmons-1-146&amp;quot; /&amp;gt; In a long enough duct, the flame front acts as an accelerating piston, a shock wave forms, and the flame becomes a detonation travelling at typically 1500 to 3000 m/s.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt; For gases initially at atmospheric pressure, the pressure behind the detonation can reach 20 bar, and up to 100 bar where it reflects from the end of the duct.&amp;lt;ref name=&amp;quot;Simmons-1-147&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Ural and Garzia (2008) describe the same chain for process plants. A pipe that carries a flammable mixture can act as a fuse: ignition at one end can send a flame through the pipe to a process unit at the other end.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The flame speeds up steadily unless it is blocked near the point of ignition. In the detonable range the front can undergo [[Deflagration-to-detonation transition]], with pressures of about 25 times the initial pressure and reflected pressures up to 50 times.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
For a pipe initially at 101 kPa, these factors mean about 2.5 MPa and 5.1 MPa absolute. These values are of the same order as the 20 bar and 100 bar given by Simmons (2002), although the reflected values differ by a factor of two. Zalosh (2008) adds that most accidental explosions are deflagrations, but that detonations can follow a strong ignition source, an elongated or obstructed geometry, or very high turbulence.&amp;lt;ref name=&amp;quot;Zalosh-2-100&amp;quot;&amp;gt;Zalosh (2008), p. 2-100.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The difference matters for protection. In a deflagration the flame moves well below the speed of sound and the pressure rises almost uniformly; in a detonation the flame is supersonic and the pressure rises almost instantly behind a shock.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot;&amp;gt;Zalosh (2008), p. 2-99.&amp;lt;/ref&amp;gt; The Chapman-Jouguet detonation pressure is roughly twice the closed-vessel deflagration pressure, 16 to 20 atmospheres for a near-stoichiometric mixture at atmospheric pressure.&amp;lt;ref name=&amp;quot;Zalosh-2-99&amp;quot; /&amp;gt; Explosion vents placed on a pipe can limit pressure and flame speed, yet the flame may still run through the whole length of pipe at moderate speed.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Pipeline detonations often cause periodic ruptures along the line, with each break acting as a pressure relief before the pressure builds up again.&amp;lt;ref name=&amp;quot;Zalosh-3-411&amp;quot;&amp;gt;Zalosh (2002), p. 3-411.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Types of arrester ==&lt;br /&gt;
The &amp;#039;&amp;#039;Fire Protection Handbook&amp;#039;&amp;#039; distinguishes static dry flame arresters from hydraulic, or liquid seal, arresters.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; Approved dry arresters are cellular. They include perforated-plate, parallel-plate, crimped-metal-ribbon and sintered metal arresters.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Two parameters govern their effectiveness: the diameter or width of the flame passages and their length.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Arresters built from banks of parallel metal plates or tubes, with a large metal surface to dissipate heat, are more effective than screens for larger openings and less subject to clogging and corrosion.&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot;&amp;gt;Ordile (2008), p. 7-18.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Wire screens are a special case. A screen of 40 mesh has 40 wires per 25.4 mm in each direction, and each opening has an area of about 0.14 mm².&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Such a screen will ordinarily stop a flame passing through small openings, but it cannot be relied on as a flame arrester. Its wires can be damaged and its mesh can clog with dirt or other residues.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; In gas detectors, catalytic sensors sit inside a flame arrester of wire mesh or sintered metal, so that combustion on the hot sensor bead cannot spread to the atmosphere outside.&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
A hydraulic arrester passes the gas through a liquid, which breaks the flow into single bubbles that rise by buoyancy. Because the bubbles are isolated, no continuous channel exists through which a flame can pass.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-160.&amp;lt;/ref&amp;gt; The device blocks a flame that starts on the side where the bubbles reach the liquid surface, which is the usual direction of use. For ignition on the upstream side, the protection is less effective, because combustion can be transferred to the surface of the liquid.&amp;lt;ref name=&amp;quot;UG-17-160&amp;quot; /&amp;gt; Designs include bubble-screen and sparge-tube vessels with instruments for gas flow, liquid level and temperature.&amp;lt;ref name=&amp;quot;UG-17-161&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-161.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
By position, arresters are of the end-of-line type, at the outlet of a vent pipe, or the in-line type, mounted within the pipe.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Flame arresters are normally placed at the end of a pipeline near a possible ignition source. Arresters intended for use at a significant distance from the pipe end, such as in-line units, are subject to special requirements, and NFPA 69 contains requirements for their installation.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; The US Coast Guard set test requirements for arresters in mid-pipe positions that may be challenged by a detonation, and these were adopted in ANSI/UL 525, &amp;#039;&amp;#039;Standard for Safety Flame Arresters&amp;#039;&amp;#039;.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-165&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-165.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Applications ==&lt;br /&gt;
The main use is on the vents of tanks for flammable liquids. In US practice described by Ordile (2008), every tank needs a vent for filling, emptying and thermal expansion and contraction; API Standard 2000 gives the design basis. Alternatively, the normal vent should be at least as large as the largest fill or withdrawal connection, and never less than 32 mm (1.25 in.).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; Approved pressure-vacuum (breather) vent valves or flame arresters on the vent pipes prevent flashback into the tank. These devices are required when a flammable mixture is present and for the storage of all Class I liquids.&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt; NFPA 30, as summarised in the 2008 handbook, also requires normally closed vents for Class IA liquids, with a flash point below 73 °F (22.8 °C) and a boiling point below 100 °F (38 °C).&amp;lt;ref name=&amp;quot;Ordile-7-18&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
On an [[Atmospheric storage tank]] that holds a liquid whose flash point lies in the range of normal summer temperatures, the vapour space normally contains a flammable mixture. Flame arresters have their most important application on such tanks.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Lightning protection guidance in the same handbook lists, among its conditions for metal tanks of flammable liquids, that all vapour openings are closed or fitted with flame arresters for Class I liquids.&amp;lt;ref name=&amp;quot;Caloggero-11-78&amp;quot;&amp;gt;Caloggero (2008), p. 11-78.&amp;lt;/ref&amp;gt; More generally, Benedetti (2008) names safe venting of storage tanks, and flame arresters that guard against flame travelling into the storage, among the design means for flammable liquid storage.&amp;lt;ref name=&amp;quot;Benedetti-6-7&amp;quot;&amp;gt;Benedetti (2008), p. 6-7.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Smaller containers use the same idea. Scarbrough (2008b) describes the practice in spray finishing. Flammable liquid containers of more than 19 L (5 gal) kept indoors should have a special plug that combines a pressure relief valve, a vacuum relief valve and a flame arrester.&amp;lt;ref name=&amp;quot;Scarbrough-9-33&amp;quot; /&amp;gt; Containers of coating materials near process areas should have pressure relief devices and flame arresters at all openings.&amp;lt;ref name=&amp;quot;Scarbrough-9-33&amp;quot; /&amp;gt; For small quantities the handbook prefers the [[Safety can]], whose spring-closed caps prevent spills and act as an emergency vent in a fire.&amp;lt;ref name=&amp;quot;Ordile-7-31&amp;quot;&amp;gt;Ordile (2008), p. 7-31.&amp;lt;/ref&amp;gt; Process tanks for dipping are drawn with a vent fitted with a flame arrester.&amp;lt;ref name=&amp;quot;Katunar-9-40&amp;quot;&amp;gt;Katunar (2008), p. 9-40.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Other uses are found in engines, boats and process plants. Arcing electrical parts of stationary combustion engines that pump or compress flammable liquids or gases should be safeguarded by flashover shielding, flame arresters, purging or ventilation.&amp;lt;ref name=&amp;quot;Biggins-8-107&amp;quot;&amp;gt;Biggins (2008), p. 8-107.&amp;lt;/ref&amp;gt; On US boats with gasoline engines, as described by Eberly (2008), backfire flame arresters are still required, although they no longer need a US Coast Guard approval number.&amp;lt;ref name=&amp;quot;Eberly-21-156&amp;quot;&amp;gt;Eberly (2008), p. 21-156.&amp;lt;/ref&amp;gt; A backfire arrester in fully premixed air-fuel gas piping stops flame propagation, shuts off the fuel and relieves the pressure of a backfire.&amp;lt;ref name=&amp;quot;IS-F7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. F-7.&amp;lt;/ref&amp;gt; In oilseed solvent extraction plants, the absorber vent discharges to the atmosphere through a flame arrester.&amp;lt;ref name=&amp;quot;Kingsbaker-9-135&amp;quot;&amp;gt;Kingsbaker (2008), p. 9-135.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Limitations and maintenance ==&lt;br /&gt;
A flame arrester is only as good as its passages. Condensation, crystallisation of some liquids and freezing of moisture in winter can make conservation vents and flame arresters impractical, and steam tracing is sometimes provided to prevent this.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; If an arrester is exposed to a long-burning flame, the metal plates can become hot enough on the tank side to ignite the flammable vapour-air mixture inside.&amp;lt;ref name=&amp;quot;Ordile-7-19&amp;quot; /&amp;gt; Arresters are not suitable for dust or saturated vapour service.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt; In oxygen-enriched atmospheres, above 21 % oxygen by volume or an oxygen partial pressure above 21.27 kPa (160 mmHg), the arresters of gas sensors may need a special design.&amp;lt;ref name=&amp;quot;Cholin-14-103&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Arresters are not fitted everywhere. In oilseed extraction plants the discharge line from relief valves to the atmosphere must not be fitted with a flame arrester.&amp;lt;ref name=&amp;quot;Kingsbaker-9-135&amp;quot; /&amp;gt; The handbook&amp;#039;s comparison of isolation methods shows the trade-off. A flame arrester isolates a deflagration and an ignition source in gas service, but it does not provide flow or pressure isolation; a liquid seal behaves in the same way.&amp;lt;ref name=&amp;quot;UG-17-159&amp;quot;&amp;gt;Ural and Garzia (2008), p. 17-159.&amp;lt;/ref&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The flame arrester is therefore one option among several. For dusts, or where pressure must also be stopped, Ural and Garzia (2008) describe rotary valves, flame front diverters, float valves and active systems with fast-acting valves or chemical barriers.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;UG-17-159&amp;quot; /&amp;gt; Each of these isolation techniques has its own application limits.&amp;lt;ref name=&amp;quot;UG-17-158&amp;quot; /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== See also ==&lt;br /&gt;
* [[Explosionproof equipment]]&lt;br /&gt;
* [[Minimum ignition energy]]&lt;br /&gt;
* [[Hazardous area classification]]&lt;br /&gt;
* [[NFPA 69]]&lt;br /&gt;
&lt;br /&gt;
== Notes ==&lt;br /&gt;
&amp;lt;references /&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== References ==&lt;br /&gt;
* Benedetti, R. P. (2008). Fire hazards of materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-3–6-9). National Fire Protection Association.&lt;br /&gt;
* Beyler, C. L. (2002b). Flammability limits of premixed and diffusion flames. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 2-172–2-187). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Biggins, J. B. (2008). Stationary combustion engines and fuel cells. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 8-105–8-111). National Fire Protection Association.&lt;br /&gt;
* Caloggero, J. M. (2008). Lightning protection systems. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 11-69–11-81). National Fire Protection Association.&lt;br /&gt;
* Cholin, J. M. (2008a). Gas and vapor detection systems and monitors. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 14-99–14-112). National Fire Protection Association.&lt;br /&gt;
* Eberly, R. (2008). Marine vessels. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 21-151–21-185). National Fire Protection Association.&lt;br /&gt;
* Iqbal, N., &amp;amp; Salley, M. H. (2004). &amp;#039;&amp;#039;Fire Dynamics Tools (FDTs): Quantitative fire hazard analysis methods for the U.S. Nuclear Regulatory Commission Fire Protection Inspection Program&amp;#039;&amp;#039; (NUREG-1805). U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation.&lt;br /&gt;
* Katunar, J., III (2008). Dipping and coating processes. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-39–9-51). National Fire Protection Association.&lt;br /&gt;
* Kingsbaker, C. L. (2008). Oilseed solvent extraction plants. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-131–9-140). National Fire Protection Association.&lt;br /&gt;
* Moore, L. J. (2008). Mining and mineral processing. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-203–9-223). National Fire Protection Association.&lt;br /&gt;
* Ordile, A. M. (2008). Storage of flammable and combustible liquids. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 7-15–7-33). National Fire Protection Association.&lt;br /&gt;
* Scarbrough, D. R. (2008b). Spray finishing and powder coating. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 9-27–9-37). National Fire Protection Association.&lt;br /&gt;
* Simmons, R. F. (2002). Premixed burning. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 1-144–1-154). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Ural, E. A., &amp;amp; Garzia, H. W. (2008). Explosion prevention and protection. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 17-141–17-165). National Fire Protection Association.&lt;br /&gt;
* Zalosh, R. (2002). Explosion protection. In P. J. DiNenno, D. Drysdale, C. L. Beyler, W. D. Walton, R. L. P. Custer, J. R. Hall Jr., &amp;amp; J. M. Watts Jr. (Eds.), &amp;#039;&amp;#039;SFPE handbook of fire protection engineering&amp;#039;&amp;#039; (3rd ed., pp. 3-402–3-421). National Fire Protection Association; Society of Fire Protection Engineers.&lt;br /&gt;
* Zalosh, R. (2008). Explosions. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-93–2-106). National Fire Protection Association.&lt;br /&gt;
&lt;br /&gt;
[[Category:Explosions &amp;amp; Industrial Fires]]&lt;/div&gt;</summary>
		<author><name>Jan</name></author>
	</entry>
</feed>