<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Cable_fire</id>
	<title>Cable fire - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://fire-safety.academy/w/index.php?action=history&amp;feed=atom&amp;title=Cable_fire"/>
	<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;action=history"/>
	<updated>2026-11-21T22:11:34Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.43.11</generator>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=9445&amp;oldid=prev</id>
		<title>Peter: Wiki review: corrected 1 error: typo (Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=9445&amp;oldid=prev"/>
		<updated>2026-11-15T23:48:57Z</updated>

		<summary type="html">&lt;p&gt;Wiki review: corrected 1 error: typo (Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 00:48, 16 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l19&quot;&gt;Line 19:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 19:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The fire at the Browns Ferry plant in Alabama on 22 March 1975 is the classic cable fire.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot;&amp;gt;Kampmeyer (2008), p. 18-73.&amp;lt;/ref&amp;gt; Workers were using a candle to check for air leaks where cable trays passed through a wall into the reactor building.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-H-8&amp;quot; /&amp;gt; The air flow drew the flame into polyurethane foam sealing the opening, and fire spread along the cables, shorting out backup safety systems.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot; /&amp;gt; Temperatures reached about 816 °C, and more than 1,600 cables in 117 conduits and 26 trays were damaged.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt; At one point all power to the emergency core cooling motors and valves of Unit 1 was lost.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The fire at the Browns Ferry plant in Alabama on 22 March 1975 is the classic cable fire.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot;&amp;gt;Kampmeyer (2008), p. 18-73.&amp;lt;/ref&amp;gt; Workers were using a candle to check for air leaks where cable trays passed through a wall into the reactor building.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-H-8&amp;quot; /&amp;gt; The air flow drew the flame into polyurethane foam sealing the opening, and fire spread along the cables, shorting out backup safety systems.&amp;lt;ref name=&amp;quot;Kampmeyer-18-73&amp;quot; /&amp;gt; Temperatures reached about 816 °C, and more than 1,600 cables in 117 conduits and 26 trays were damaged.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt; At one point all power to the emergency core cooling motors and valves of Unit 1 was lost.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The most intense burning covered only about 3.3 m by 2.5 m, yet the fire burned for some 7 hours because of reluctance to use water.&amp;lt;ref name=&quot;IqbalSalley-A-2&quot; /&amp;gt; Portable carbon dioxide and dry chemical extinguishers failed for hours, but once water was used the reactor building fire was out within minutes.&amp;lt;ref name=&quot;IqbalSalley-H-9&quot;&amp;gt;Iqbal and Salley (2004), p. H-9.&amp;lt;/ref&amp;gt; The handbook puts the property damage at $302.93 million in 2007 US dollars and the outage at one and a half years for two 1,065 MW units.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; NUREG-1805 gives a direct fire loss of $10 million plus $200 million for replacement electricity over 18 months.&amp;lt;ref name=&quot;IqbalSalley-H-8&quot; /&amp;gt; The US Nuclear Regulatory Commission then issued new requirements in 10 CFR 50.48 and Appendix R, which shaped [[&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Nuclear &lt;/del&gt;facility fire protection]].&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The most intense burning covered only about 3.3 m by 2.5 m, yet the fire burned for some 7 hours because of reluctance to use water.&amp;lt;ref name=&quot;IqbalSalley-A-2&quot; /&amp;gt; Portable carbon dioxide and dry chemical extinguishers failed for hours, but once water was used the reactor building fire was out within minutes.&amp;lt;ref name=&quot;IqbalSalley-H-9&quot;&amp;gt;Iqbal and Salley (2004), p. H-9.&amp;lt;/ref&amp;gt; The handbook puts the property damage at $302.93 million in 2007 US dollars and the outage at one and a half years for two 1,065 MW units.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; NUREG-1805 gives a direct fire loss of $10 million plus $200 million for replacement electricity over 18 months.&amp;lt;ref name=&quot;IqbalSalley-H-8&quot; /&amp;gt; The US Nuclear Regulatory Commission then issued new requirements in 10 CFR 50.48 and Appendix R, which shaped [[&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;nuclear &lt;/ins&gt;facility fire protection]].&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At a fossil-fuel plant outside the United States, an electrical fault ignited cables that consumed 5 tons of PVC in 10 hours.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt; The damage was $45.19 million (2007 US dollars), and the plant was out of service for nearly a year.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt; At Hinsdale, Illinois, in May 1988, a telephone exchange fire burned for over 3 hours but stayed within cable trays in an area of 9 m by 12 m (30 ft by 40 ft).&amp;lt;ref name=&amp;quot;Transue-9-170&amp;quot; /&amp;gt; Such fires are small by most measures, but their impact on the community can be large, as described under [[Telecommunications facility]].&amp;lt;ref name=&amp;quot;Transue-9-170&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;At a fossil-fuel plant outside the United States, an electrical fault ignited cables that consumed 5 tons of PVC in 10 hours.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt; The damage was $45.19 million (2007 US dollars), and the plant was out of service for nearly a year.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt; At Hinsdale, Illinois, in May 1988, a telephone exchange fire burned for over 3 hours but stayed within cable trays in an area of 9 m by 12 m (30 ft by 40 ft).&amp;lt;ref name=&amp;quot;Transue-9-170&amp;quot; /&amp;gt; Such fires are small by most measures, but their impact on the community can be large, as described under [[Telecommunications facility]].&amp;lt;ref name=&amp;quot;Transue-9-170&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-6488:rev-9445:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=6488&amp;oldid=prev</id>
		<title>Mark: Remove source references from image captions</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=6488&amp;oldid=prev"/>
		<updated>2026-11-13T07:23:04Z</updated>

		<summary type="html">&lt;p&gt;Remove source references from image captions&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:23, 13 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l3&quot;&gt;Line 3:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 3:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v1.svg|thumb|upright=1.5|alt=Cross-sections of a PVC-jacketed thermoplastic cable and an XLPE thermoset cable with conductors, insulation, filler, shield and jacket labelled|Construction of two common cable types. The polymer insulation and jacket are the fuel in a cable fire; the metal conductors are not&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Iqbal and Salley (2004), pp. A-2–A-8&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v1.svg|thumb|upright=1.5|alt=Cross-sections of a PVC-jacketed thermoplastic cable and an XLPE thermoset cable with conductors, insulation, filler, shield and jacket labelled|Construction of two common cable types. The polymer insulation and jacket are the fuel in a cable fire; the metal conductors are not.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l82&quot;&gt;Line 82:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 82:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an exposure fire with a base 1.0 m long under 0.6 m wide trays of PE/PVC cable, spaced 0.27 m apart.&amp;lt;ref name=&amp;quot;Nowlen-R-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot; /&amp;gt; The lowest tray burns over 1.0 m × 0.6 m = 0.60 m², which gives 0.45 × 589 × 0.60 = 159 kW. The second tray burns over 1.0 + 2 × 0.27 × tan 35 degrees = 1.38 m, or 0.83 m², adding about 220 kW four minutes later. With XPE/XPE cable the same trays release only about 49 kW and 67 kW, so the cable type largely sets the fire size. NUREG-1805 obtains 517 kW in the same way for 2 m² (21 ft²) of PE/PVC tray ignited by a waste bin fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-8.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an exposure fire with a base 1.0 m long under 0.6 m wide trays of PE/PVC cable, spaced 0.27 m apart.&amp;lt;ref name=&amp;quot;Nowlen-R-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot; /&amp;gt; The lowest tray burns over 1.0 m × 0.6 m = 0.60 m², which gives 0.45 × 589 × 0.60 = 159 kW. The second tray burns over 1.0 + 2 × 0.27 × tan 35 degrees = 1.38 m, or 0.83 m², adding about 220 kW four minutes later. With XPE/XPE cable the same trays release only about 49 kW and 67 kW, so the cable type largely sets the fire size. NUREG-1805 obtains 517 kW in the same way for 2 m² (21 ft²) of PE/PVC tray ignited by a waste bin fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-8.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v2.svg|thumb|upright=1.5|alt=Side view of a stack of horizontal cable trays above a fire, with burning lengths widening by 35 degrees per level and ignition times|Fire propagation in a stack of horizontal cable trays: the burning length grows by 35 degrees to each side per tray level, and the next trays ignite 4, 7 and 9 minutes after the first&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Nowlen et al. (2005b), pp. R-9–R-10&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v2.svg|thumb|upright=1.5|alt=Side view of a stack of horizontal cable trays above a fire, with burning lengths widening by 35 degrees per level and ignition times|Fire propagation in a stack of horizontal cable trays: the burning length grows by 35 degrees to each side per tray level, and the next trays ignite 4, 7 and 9 minutes after the first.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable damage and failure criteria ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable damage and failure criteria ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l99&quot;&gt;Line 99:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 99:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Damage takes time. A thermoplastic cable fails after about 30 minutes at 205 °C, 10 minutes at 260 °C and 1 minute at 370 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-18.&amp;lt;/ref&amp;gt; A thermoset cable fails after about 28 minutes at 330 °C and 13 minutes at 350 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-16&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-16.&amp;lt;/ref&amp;gt; Under radiant heating, both types take about 19 minutes at their threshold flux and 1 minute at 16 to 20 kW/m² or more.&amp;lt;ref name=&amp;quot;IqbalSalley-A-19&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-19.&amp;lt;/ref&amp;gt; The THIEF model, tested in the US CAROLFIRE programme, treats a cable as a heated homogeneous cylinder.&amp;lt;ref name=&amp;quot;Stroup-3-3&amp;quot;&amp;gt;Stroup et al. (2016), p. 3-3.&amp;lt;/ref&amp;gt; In those tests, failure times ranged from a few minutes to nearly half an hour, the longer times for cables in steel conduit.&amp;lt;ref name=&amp;quot;Stroup-6-48&amp;quot;&amp;gt;Stroup et al. (2016), p. 6-48.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Damage takes time. A thermoplastic cable fails after about 30 minutes at 205 °C, 10 minutes at 260 °C and 1 minute at 370 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-18.&amp;lt;/ref&amp;gt; A thermoset cable fails after about 28 minutes at 330 °C and 13 minutes at 350 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-16&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-16.&amp;lt;/ref&amp;gt; Under radiant heating, both types take about 19 minutes at their threshold flux and 1 minute at 16 to 20 kW/m² or more.&amp;lt;ref name=&amp;quot;IqbalSalley-A-19&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-19.&amp;lt;/ref&amp;gt; The THIEF model, tested in the US CAROLFIRE programme, treats a cable as a heated homogeneous cylinder.&amp;lt;ref name=&amp;quot;Stroup-3-3&amp;quot;&amp;gt;Stroup et al. (2016), p. 3-3.&amp;lt;/ref&amp;gt; In those tests, failure times ranged from a few minutes to nearly half an hour, the longer times for cables in steel conduit.&amp;lt;ref name=&amp;quot;Stroup-6-48&amp;quot;&amp;gt;Stroup et al. (2016), p. 6-48.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v3.svg|thumb|upright=1.5|alt=Line chart of time to cable failure against exposure temperature, thermoplastic from 30 minutes at 205 °C and thermoset from 28 minutes at 330 °C|Time to electrical failure of cables exposed to hot gas, as tabulated for US nuclear plant screening. Thermoplastic cables fail at lower temperatures and sooner&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Iqbal and Salley (2004), pp. A-16, A-18&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v3.svg|thumb|upright=1.5|alt=Line chart of time to cable failure against exposure temperature, thermoplastic from 30 minutes at 205 °C and thermoset from 28 minutes at 330 °C|Time to electrical failure of cables exposed to hot gas, as tabulated for US nuclear plant screening. Thermoplastic cables fail at lower temperatures and sooner.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A simple screening check compares the temperature of the [[Fire plume|fire plume]] at tray height with these criteria. Above the mean flame height, the centreline temperature falls with height, measured from a virtual origin that replaces the fire by an equivalent point source.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-154.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-155.&amp;lt;/ref&amp;gt; The equations assume a convective fraction of 0.65 and standard atmospheric conditions.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot; /&amp;gt; The virtual origin expression is limited to pool fires and horizontal burning.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A simple screening check compares the temperature of the [[Fire plume|fire plume]] at tray height with these criteria. Above the mean flame height, the centreline temperature falls with height, measured from a virtual origin that replaces the fire by an equivalent point source.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-154.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-155.&amp;lt;/ref&amp;gt; The equations assume a convective fraction of 0.65 and standard atmospheric conditions.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot; /&amp;gt; The virtual origin expression is limited to pool fires and horizontal burning.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l122&quot;&gt;Line 122:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 122:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook applies this check to a 500 kW fire about 1 m across, 7 m below a power cable tray in a large hall at 20 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; The virtual origin lies at −0.02 m, and the plume temperature at the tray is only 66 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; With the tray 2.5 m above the same fire, still above the mean flame height of about 1.7 m, the equation gives 273 °C.&amp;lt;ref name=&amp;quot;Budnick-3-153&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-153.&amp;lt;/ref&amp;gt; This exceeds the thermoplastic criterion of 205 °C but not the thermoset criterion of 330 °C.&amp;lt;ref name=&amp;quot;Nowlen-H-1&amp;quot; /&amp;gt; A thermoplastic cable at about 270 °C fails within 8 to 10 minutes, so 8 minutes is the safe-side estimate.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook applies this check to a 500 kW fire about 1 m across, 7 m below a power cable tray in a large hall at 20 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; The virtual origin lies at −0.02 m, and the plume temperature at the tray is only 66 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; With the tray 2.5 m above the same fire, still above the mean flame height of about 1.7 m, the equation gives 273 °C.&amp;lt;ref name=&amp;quot;Budnick-3-153&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-153.&amp;lt;/ref&amp;gt; This exceeds the thermoplastic criterion of 205 °C but not the thermoset criterion of 330 °C.&amp;lt;ref name=&amp;quot;Nowlen-H-1&amp;quot; /&amp;gt; A thermoplastic cable at about 270 °C fails within 8 to 10 minutes, so 8 minutes is the safe-side estimate.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v4.svg|thumb|upright=1.5|alt=Curve of plume centreline temperature against height above a 500 kW fire, crossing 330 °C near 2.2 m and 205 °C near 3.0 m|Plume centreline temperature above a 500 kW fire 1 m in diameter at 20 °C ambient, compared with the cable damage criteria. Trays at 2.5 m and 7 m are marked&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;. Based on Budnick et al. (2008), pp. 3-153–3-155&lt;/del&gt;.]]&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;[[File:fse-cable-fire-v4.svg|thumb|upright=1.5|alt=Curve of plume centreline temperature against height above a 500 kW fire, crossing 330 °C near 2.2 m and 205 °C near 3.0 m|Plume centreline temperature above a 500 kW fire 1 m in diameter at 20 °C ambient, compared with the cable damage criteria. Trays at 2.5 m and 7 m are marked.]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5834:rev-6488:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=5834&amp;oldid=prev</id>
		<title>Peter: Add SVG figures fse-cable-fire-v1.svg, fse-cable-fire-v2.svg, fse-cable-fire-v3.svg, fse-cable-fire-v4.svg (list-3 visual plan)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=5834&amp;oldid=prev"/>
		<updated>2026-11-12T12:13:19Z</updated>

		<summary type="html">&lt;p&gt;Add SVG figures fse-cable-fire-v1.svg, fse-cable-fire-v2.svg, fse-cable-fire-v3.svg, fse-cable-fire-v4.svg (list-3 visual plan)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 13:13, 12 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l3&quot;&gt;Line 3:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 3:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-cable-fire-v1.svg|thumb|upright=1.5|alt=Cross-sections of a PVC-jacketed thermoplastic cable and an XLPE thermoset cable with conductors, insulation, filler, shield and jacket labelled|Construction of two common cable types. The polymer insulation and jacket are the fuel in a cable fire; the metal conductors are not. Based on Iqbal and Salley (2004), pp. A-2–A-8.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l81&quot;&gt;Line 81:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 82:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an exposure fire with a base 1.0 m long under 0.6 m wide trays of PE/PVC cable, spaced 0.27 m apart.&amp;lt;ref name=&amp;quot;Nowlen-R-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot; /&amp;gt; The lowest tray burns over 1.0 m × 0.6 m = 0.60 m², which gives 0.45 × 589 × 0.60 = 159 kW. The second tray burns over 1.0 + 2 × 0.27 × tan 35 degrees = 1.38 m, or 0.83 m², adding about 220 kW four minutes later. With XPE/XPE cable the same trays release only about 49 kW and 67 kW, so the cable type largely sets the fire size. NUREG-1805 obtains 517 kW in the same way for 2 m² (21 ft²) of PE/PVC tray ignited by a waste bin fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-8.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;As a worked example, take an exposure fire with a base 1.0 m long under 0.6 m wide trays of PE/PVC cable, spaced 0.27 m apart.&amp;lt;ref name=&amp;quot;Nowlen-R-9&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot; /&amp;gt; The lowest tray burns over 1.0 m × 0.6 m = 0.60 m², which gives 0.45 × 589 × 0.60 = 159 kW. The second tray burns over 1.0 + 2 × 0.27 × tan 35 degrees = 1.38 m, or 0.83 m², adding about 220 kW four minutes later. With XPE/XPE cable the same trays release only about 49 kW and 67 kW, so the cable type largely sets the fire size. NUREG-1805 obtains 517 kW in the same way for 2 m² (21 ft²) of PE/PVC tray ignited by a waste bin fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-8.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-cable-fire-v2.svg|thumb|upright=1.5|alt=Side view of a stack of horizontal cable trays above a fire, with burning lengths widening by 35 degrees per level and ignition times|Fire propagation in a stack of horizontal cable trays: the burning length grows by 35 degrees to each side per tray level, and the next trays ignite 4, 7 and 9 minutes after the first. Based on Nowlen et al. (2005b), pp. R-9–R-10.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable damage and failure criteria ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable damage and failure criteria ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l97&quot;&gt;Line 97:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 99:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Damage takes time. A thermoplastic cable fails after about 30 minutes at 205 °C, 10 minutes at 260 °C and 1 minute at 370 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-18.&amp;lt;/ref&amp;gt; A thermoset cable fails after about 28 minutes at 330 °C and 13 minutes at 350 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-16&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-16.&amp;lt;/ref&amp;gt; Under radiant heating, both types take about 19 minutes at their threshold flux and 1 minute at 16 to 20 kW/m² or more.&amp;lt;ref name=&amp;quot;IqbalSalley-A-19&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-19.&amp;lt;/ref&amp;gt; The THIEF model, tested in the US CAROLFIRE programme, treats a cable as a heated homogeneous cylinder.&amp;lt;ref name=&amp;quot;Stroup-3-3&amp;quot;&amp;gt;Stroup et al. (2016), p. 3-3.&amp;lt;/ref&amp;gt; In those tests, failure times ranged from a few minutes to nearly half an hour, the longer times for cables in steel conduit.&amp;lt;ref name=&amp;quot;Stroup-6-48&amp;quot;&amp;gt;Stroup et al. (2016), p. 6-48.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Damage takes time. A thermoplastic cable fails after about 30 minutes at 205 °C, 10 minutes at 260 °C and 1 minute at 370 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-18.&amp;lt;/ref&amp;gt; A thermoset cable fails after about 28 minutes at 330 °C and 13 minutes at 350 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-16&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-16.&amp;lt;/ref&amp;gt; Under radiant heating, both types take about 19 minutes at their threshold flux and 1 minute at 16 to 20 kW/m² or more.&amp;lt;ref name=&amp;quot;IqbalSalley-A-19&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-19.&amp;lt;/ref&amp;gt; The THIEF model, tested in the US CAROLFIRE programme, treats a cable as a heated homogeneous cylinder.&amp;lt;ref name=&amp;quot;Stroup-3-3&amp;quot;&amp;gt;Stroup et al. (2016), p. 3-3.&amp;lt;/ref&amp;gt; In those tests, failure times ranged from a few minutes to nearly half an hour, the longer times for cables in steel conduit.&amp;lt;ref name=&amp;quot;Stroup-6-48&amp;quot;&amp;gt;Stroup et al. (2016), p. 6-48.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-cable-fire-v3.svg|thumb|upright=1.5|alt=Line chart of time to cable failure against exposure temperature, thermoplastic from 30 minutes at 205 °C and thermoset from 28 minutes at 330 °C|Time to electrical failure of cables exposed to hot gas, as tabulated for US nuclear plant screening. Thermoplastic cables fail at lower temperatures and sooner. Based on Iqbal and Salley (2004), pp. A-16, A-18.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A simple screening check compares the temperature of the [[Fire plume|fire plume]] at tray height with these criteria. Above the mean flame height, the centreline temperature falls with height, measured from a virtual origin that replaces the fire by an equivalent point source.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-154.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-155.&amp;lt;/ref&amp;gt; The equations assume a convective fraction of 0.65 and standard atmospheric conditions.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot; /&amp;gt; The virtual origin expression is limited to pool fires and horizontal burning.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A simple screening check compares the temperature of the [[Fire plume|fire plume]] at tray height with these criteria. Above the mean flame height, the centreline temperature falls with height, measured from a virtual origin that replaces the fire by an equivalent point source.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-154.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-155.&amp;lt;/ref&amp;gt; The equations assume a convective fraction of 0.65 and standard atmospheric conditions.&amp;lt;ref name=&amp;quot;Budnick-3-154&amp;quot; /&amp;gt; The virtual origin expression is limited to pool fires and horizontal burning.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l119&quot;&gt;Line 119:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 122:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook applies this check to a 500 kW fire about 1 m across, 7 m below a power cable tray in a large hall at 20 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; The virtual origin lies at −0.02 m, and the plume temperature at the tray is only 66 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; With the tray 2.5 m above the same fire, still above the mean flame height of about 1.7 m, the equation gives 273 °C.&amp;lt;ref name=&amp;quot;Budnick-3-153&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-153.&amp;lt;/ref&amp;gt; This exceeds the thermoplastic criterion of 205 °C but not the thermoset criterion of 330 °C.&amp;lt;ref name=&amp;quot;Nowlen-H-1&amp;quot; /&amp;gt; A thermoplastic cable at about 270 °C fails within 8 to 10 minutes, so 8 minutes is the safe-side estimate.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook applies this check to a 500 kW fire about 1 m across, 7 m below a power cable tray in a large hall at 20 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; The virtual origin lies at −0.02 m, and the plume temperature at the tray is only 66 °C.&amp;lt;ref name=&amp;quot;Budnick-3-155&amp;quot; /&amp;gt; With the tray 2.5 m above the same fire, still above the mean flame height of about 1.7 m, the equation gives 273 °C.&amp;lt;ref name=&amp;quot;Budnick-3-153&amp;quot;&amp;gt;Budnick et al. (2008), p. 3-153.&amp;lt;/ref&amp;gt; This exceeds the thermoplastic criterion of 205 °C but not the thermoset criterion of 330 °C.&amp;lt;ref name=&amp;quot;Nowlen-H-1&amp;quot; /&amp;gt; A thermoplastic cable at about 270 °C fails within 8 to 10 minutes, so 8 minutes is the safe-side estimate.&amp;lt;ref name=&amp;quot;IqbalSalley-A-18&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-cable-fire-v4.svg|thumb|upright=1.5|alt=Curve of plume centreline temperature against height above a 500 kW fire, crossing 330 °C near 2.2 m and 205 °C near 3.0 m|Plume centreline temperature above a 500 kW fire 1 m in diameter at 20 °C ambient, compared with the cable damage criteria. Trays at 2.5 m and 7 m are marked. Based on Budnick et al. (2008), pp. 3-153–3-155.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Testing and classification ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-5227:rev-5834:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Peter</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=5227&amp;oldid=prev</id>
		<title>Linda: Add watermarked Fire Safety Academy illustration at the location specified in the visual plan</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=5227&amp;oldid=prev"/>
		<updated>2026-11-08T07:52:42Z</updated>

		<summary type="html">&lt;p&gt;Add watermarked Fire Safety Academy illustration at the location specified in the visual plan&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 08:52, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l24&quot;&gt;Line 24:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 24:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Heat release and fire spread in cable trays ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Heat release and fire spread in cable trays ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable insulation and jackets dominate the fuel load in most areas of a nuclear power plant.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt; A typical boiling-water reactor needs about 97 km of power cable, 80.5 km of control cable and 402 km of instrument cable.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt; Babrauskas notes that only a few of the almost endless combinations of cable, tray, stacking and ignition source have been studied.&amp;lt;ref name=&amp;quot;Babrauskas-3-16&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-16.&amp;lt;/ref&amp;gt; No reliable general correlation exists for the [[Heat release rate|heat release rate]] of a full-scale tray fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable insulation and jackets dominate the fuel load in most areas of a nuclear power plant.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt; A typical boiling-water reactor needs about 97 km of power cable, 80.5 km of control cable and 402 km of instrument cable.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot; /&amp;gt; Babrauskas notes that only a few of the almost endless combinations of cable, tray, stacking and ignition source have been studied.&amp;lt;ref name=&amp;quot;Babrauskas-3-16&amp;quot;&amp;gt;Babrauskas (2002b), p. 3-16.&amp;lt;/ref&amp;gt; No reliable general correlation exists for the [[Heat release rate|heat release rate]] of a full-scale tray fire.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;[[File:fse-cable-fire-v5.jpg|thumb|upright=1.5|alt=several stacked horizontal ladder-type cable trays densely filled with insulated electrical cables|Stacked open cable trays filled with grouped cables. Grouped cables spread flame much faster than single cables.]]&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The method most used is a correlation by Lee (1985), based on tray tests by Tewarson and colleagues and by Sumitra.&amp;lt;ref name=&amp;quot;Lee-asCited&amp;quot;&amp;gt;Lee (1985), as cited in Iqbal and Salley (2004), p. 7-3.&amp;lt;/ref&amp;gt; The peak full-scale heat release rate equals 0.45 times the peak bench-scale heat release rate per unit area, times the tray area that is actively pyrolysing.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt; The bench-scale value is measured under an irradiance of 60 kW/m².&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The method most used is a correlation by Lee (1985), based on tray tests by Tewarson and colleagues and by Sumitra.&amp;lt;ref name=&amp;quot;Lee-asCited&amp;quot;&amp;gt;Lee (1985), as cited in Iqbal and Salley (2004), p. 7-3.&amp;lt;/ref&amp;gt; The peak full-scale heat release rate equals 0.45 times the peak bench-scale heat release rate per unit area, times the tray area that is actively pyrolysing.&amp;lt;ref name=&amp;quot;IqbalSalley-7-3&amp;quot; /&amp;gt; The bench-scale value is measured under an irradiance of 60 kW/m².&amp;lt;ref name=&amp;quot;IqbalSalley-7-4&amp;quot;&amp;gt;Iqbal and Salley (2004), p. 7-4.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-4249:rev-5227:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Linda</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=4249&amp;oldid=prev</id>
		<title>Mark: FSE wiki: Fact-check: scope historic plant fire data, distinguish NRC cable-qualification definitions and welding-fire bins, complete ISO agent criterion. (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=4249&amp;oldid=prev"/>
		<updated>2026-11-08T00:55:53Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: Fact-check: scope historic plant fire data, distinguish NRC cable-qualification definitions and welding-fire bins, complete ISO agent criterion. (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 01:55, 8 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;cable fire&#039;&#039;&#039; is a fire in which the polymer insulation and jackets of electrical or communication cables burn, either as the item first ignited or as fuel that carries flame along a cable run. The hazard is greatest where many cables are grouped in trays, because grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot;&amp;gt;Iqbal and Salley (2004), p. 7-1.&amp;lt;/ref&amp;gt; A cable fire is often small, but it can destroy circuits, release toxic and corrosive smoke and shut down a power plant or a telephone network for weeks.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot;&amp;gt;Iqbal and Salley (2004), p. 7-2.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Sheridan-9-187&quot;&amp;gt;Sheridan (2008), p. 9-187.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Transue-9-170&quot;&amp;gt;Transue (2008), p. 9-170.&amp;lt;/ref&amp;gt; The 1975 cable fire at the Browns Ferry nuclear power plant led to a worldwide reappraisal of fire protection for nuclear power plants.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; Engineers estimate the heat release of burning trays from bench-scale data and compare cable temperatures with damage thresholds of 205 °C for thermoplastic and 330 °C for thermoset cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot;&amp;gt;Iqbal and Salley (2004), p. 7-3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Nowlen-H-1&quot;&amp;gt;Nowlen et al. (2005b), p. H-1.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Most of these &lt;/del&gt;methods &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;come from the &lt;/del&gt;US nuclear &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;industry &lt;/del&gt;and &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;from the 20th edition of &lt;/del&gt;the NFPA &#039;&#039;Fire Protection Handbook&#039;&#039; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;(2008), so they reflect US practice of that period&lt;/del&gt;.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A &#039;&#039;&#039;cable fire&#039;&#039;&#039; is a fire in which the polymer insulation and jackets of electrical or communication cables burn, either as the item first ignited or as fuel that carries flame along a cable run. The hazard is greatest where many cables are grouped in trays, because grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot;&amp;gt;Iqbal and Salley (2004), p. 7-1.&amp;lt;/ref&amp;gt; A cable fire is often small, but it can destroy circuits, release toxic and corrosive smoke and shut down a power plant or a telephone network for weeks.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot;&amp;gt;Iqbal and Salley (2004), p. 7-2.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Sheridan-9-187&quot;&amp;gt;Sheridan (2008), p. 9-187.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Transue-9-170&quot;&amp;gt;Transue (2008), p. 9-170.&amp;lt;/ref&amp;gt; The 1975 cable fire at the Browns Ferry nuclear power plant led to a worldwide reappraisal of fire protection for nuclear power plants.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; Engineers estimate the heat release of burning trays from bench-scale data and compare cable temperatures with damage thresholds of 205 °C for thermoplastic and 330 °C for thermoset cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot;&amp;gt;Iqbal and Salley (2004), p. 7-3.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Nowlen-H-1&quot;&amp;gt;Nowlen et al. (2005b), p. H-1.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;These &lt;/ins&gt;methods &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;chiefly reflect &lt;/ins&gt;US nuclear &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;practice &lt;/ins&gt;and the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2008 &lt;/ins&gt;NFPA &#039;&#039;Fire Protection Handbook&#039;&#039;.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Cable construction and fire behaviour ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l6&quot;&gt;Line 6:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 6:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&amp;quot;IqbalSalley-A-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Benedetti-6-210&amp;quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt;&amp;lt;ref name=&amp;quot;IqbalSalley-A-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; A melting thermoplastic can form a burning pool that releases energy quickly, while thermosets tend to char and burn more slowly.&amp;lt;ref name=&amp;quot;Custer-2-50&amp;quot;&amp;gt;Custer (2008), p. 2-50.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&amp;quot;Gann-6-12&amp;quot;&amp;gt;Gann and Bryner (2008), p. 6-12.&amp;lt;/ref&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Rubber or plastic jacketing on grouped cables has provided the fuel for fires in the electrical and communications industries.&amp;lt;ref name=&quot;Benedetti-6-226&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-226.&amp;lt;/ref&amp;gt; A 1966 NFPA study of 24 fires in US power plants was probably the first to show that grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt; Tray tests have revealed several burn modes, from uniform flaming over the bundle to melting into a burning mass and deep-seated combustion in charring cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; In the deep-seated mode, flames appear in sporadic bursts and a glowing region creeps slowly along the cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; Such a fire can recede when smoke starves it of oxygen and reignite when fresh air arrives.&amp;lt;ref name=&quot;IqbalSalley-B-40&quot;&amp;gt;Iqbal and Salley (2004), p. B-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Rubber or plastic jacketing on grouped cables has provided the fuel for fires in the electrical and communications industries.&amp;lt;ref name=&quot;Benedetti-6-226&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-226.&amp;lt;/ref&amp;gt; A 1966 NFPA study of 24 fires in US &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;nuclear &lt;/ins&gt;power plants was probably the first to show that grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt; Tray tests have revealed several burn modes, from uniform flaming over the bundle to melting into a burning mass and deep-seated combustion in charring cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; In the deep-seated mode, flames appear in sporadic bursts and a glowing region creeps slowly along the cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; Such a fire can recede when smoke starves it of oxygen and reignite when fresh air arrives.&amp;lt;ref name=&quot;IqbalSalley-B-40&quot;&amp;gt;Iqbal and Salley (2004), p. B-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Ignition sources and frequency ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Ignition sources and frequency ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Electricity can start a fire through an arc or through overheating.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot;&amp;gt;Milatovich (2008), p. 8-127.&amp;lt;/ref&amp;gt; An [[Arc fault|arc]] at a loose terminal can ignite the insulation of the conductor and throw molten metal onto nearby combustibles.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot; /&amp;gt; The heat generated in a conductor is proportional to its resistance and to the square of the current.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot; /&amp;gt; Under design conditions this heating is almost never a hazard, because the &amp;#039;&amp;#039;[[National Electrical Code]]&amp;#039;&amp;#039; (NFPA 70) specifies the ampacity, the maximum safe current of each conductor.&amp;lt;ref name=&amp;quot;Milatovich-8-127-131&amp;quot;&amp;gt;Milatovich (2008), pp. 8-127, 8-131.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Electricity can start a fire through an arc or through overheating.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot;&amp;gt;Milatovich (2008), p. 8-127.&amp;lt;/ref&amp;gt; An [[Arc fault|arc]] at a loose terminal can ignite the insulation of the conductor and throw molten metal onto nearby combustibles.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot; /&amp;gt; The heat generated in a conductor is proportional to its resistance and to the square of the current.&amp;lt;ref name=&amp;quot;Milatovich-8-127&amp;quot; /&amp;gt; Under design conditions this heating is almost never a hazard, because the &amp;#039;&amp;#039;[[National Electrical Code]]&amp;#039;&amp;#039; (NFPA 70) specifies the ampacity, the maximum safe current of each conductor.&amp;lt;ref name=&amp;quot;Milatovich-8-127-131&amp;quot;&amp;gt;Milatovich (2008), pp. 8-127, 8-131.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Fire hazard analyses usually assume that only power cables carry enough energy to ignite themselves.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot; /&amp;gt; They distinguish a fire that starts within a cable tray from an exposure fire, such as an oil spill or a waste bin, that later ignites the tray.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot; /&amp;gt; In the US fire risk method NUREG/CR-6850 (2005), self-ignited cable fires have a generic mean frequency of 4.4 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; per reactor year.&amp;lt;ref name=&quot;Nowlen-6-3&quot;&amp;gt;Nowlen et al. (2005b), p. 6-3.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Cable &lt;/del&gt;fires caused by welding and cutting &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;are counted separately, at &lt;/del&gt;1.6 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;to &lt;/del&gt;2.0 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;per reactor year&lt;/del&gt;.&amp;lt;ref name=&quot;Nowlen-6-3&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Fire hazard analyses usually assume that only power cables carry enough energy to ignite themselves.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot; /&amp;gt; They distinguish a fire that starts within a cable tray from an exposure fire, such as an oil spill or a waste bin, that later ignites the tray.&amp;lt;ref name=&quot;IqbalSalley-7-2&quot; /&amp;gt; In the US fire risk method NUREG/CR-6850 (2005), self-ignited cable fires have a generic mean frequency of 4.4 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; per reactor year.&amp;lt;ref name=&quot;Nowlen-6-3&quot;&amp;gt;Nowlen et al. (2005b), p. 6-3.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Two separate bins count cable &lt;/ins&gt;fires caused by welding and cutting&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;: &lt;/ins&gt;1.6 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;per reactor year in control, auxiliary or reactor buildings, and &lt;/ins&gt;2.0 × 10&amp;lt;sup&amp;gt;−3&amp;lt;/sup&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for plant-wide components&lt;/ins&gt;.&amp;lt;ref name=&quot;Nowlen-6-3&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two self-ignited cable fires at the San Onofre nuclear plant in 1968 show how electrical stress becomes fire.&amp;lt;ref name=&amp;quot;IqbalSalley-H-6&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-6.&amp;lt;/ref&amp;gt; Investigators found the most probable cause in thermally and mechanically stressed cables, undersized for their loads, and in fusing that fed fault current back through healthy phases.&amp;lt;ref name=&amp;quot;IqbalSalley-H-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-7.&amp;lt;/ref&amp;gt; In the second event, three stacked trays burned out over a length of 4.60 m (15 ft).&amp;lt;ref name=&amp;quot;IqbalSalley-H-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-8.&amp;lt;/ref&amp;gt; In motor control centre rooms, heat from arcing can make normally slow-burning cables in stacked trays readily combustible.&amp;lt;ref name=&amp;quot;Milatovich-8-159&amp;quot;&amp;gt;Milatovich (2008), p. 8-159.&amp;lt;/ref&amp;gt; In US home structure fires in 1999–2002, electrical wire or cable insulation was the item first ignited in 6% of fires.&amp;lt;ref name=&amp;quot;Ahrens-3-72&amp;quot;&amp;gt;Ahrens et al. (2008), pp. 3-72–3-73.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Two self-ignited cable fires at the San Onofre nuclear plant in 1968 show how electrical stress becomes fire.&amp;lt;ref name=&amp;quot;IqbalSalley-H-6&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-6.&amp;lt;/ref&amp;gt; Investigators found the most probable cause in thermally and mechanically stressed cables, undersized for their loads, and in fusing that fed fault current back through healthy phases.&amp;lt;ref name=&amp;quot;IqbalSalley-H-7&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-7.&amp;lt;/ref&amp;gt; In the second event, three stacked trays burned out over a length of 4.60 m (15 ft).&amp;lt;ref name=&amp;quot;IqbalSalley-H-8&amp;quot;&amp;gt;Iqbal and Salley (2004), p. H-8.&amp;lt;/ref&amp;gt; In motor control centre rooms, heat from arcing can make normally slow-burning cables in stacked trays readily combustible.&amp;lt;ref name=&amp;quot;Milatovich-8-159&amp;quot;&amp;gt;Milatovich (2008), p. 8-159.&amp;lt;/ref&amp;gt; In US home structure fires in 1999–2002, electrical wire or cable insulation was the item first ignited in 6% of fires.&amp;lt;ref name=&amp;quot;Ahrens-3-72&amp;quot;&amp;gt;Ahrens et al. (2008), pp. 3-72–3-73.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l121&quot;&gt;Line 121:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 121:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the United States, NFPA 70 sets four levels of flame spread performance for electrical and optical fibre cables, as summarised in the handbook (2008).&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot;&amp;gt;Hirschler (2008a), p. 6-45.&amp;lt;/ref&amp;gt; General-purpose cables are tested grouped in a vertical tray with a 20 kW flame and must not spread fire to the top of the 2.4 m tray.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Riser cables face a 145 kW flame in a two-storey shaft rig.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Plenum cables, the highest level, are tested horizontally under NFPA 262, a version of the [[Steiner tunnel test]], with an 88 kW flame.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Their flame travel may not exceed 1.52 m, with a peak optical density of at most 0.5.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In the United States, NFPA 70 sets four levels of flame spread performance for electrical and optical fibre cables, as summarised in the handbook (2008).&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot;&amp;gt;Hirschler (2008a), p. 6-45.&amp;lt;/ref&amp;gt; General-purpose cables are tested grouped in a vertical tray with a 20 kW flame and must not spread fire to the top of the 2.4 m tray.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Riser cables face a 145 kW flame in a two-storey shaft rig.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Plenum cables, the highest level, are tested horizontally under NFPA 262, a version of the [[Steiner tunnel test]], with an 88 kW flame.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt; Their flame travel may not exceed 1.52 m, with a peak optical density of at most 0.5.&amp;lt;ref name=&amp;quot;Hirschler-6-45&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In US nuclear plants the reference is IEEE 383, whose flame test applies a 21 kW burner for 20 minutes to cables on a rack 2.4 m high.&amp;lt;ref name=&quot;Nowlen-R-1&quot;&amp;gt;Nowlen et al. (2005b), p. R-1.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;A &lt;/del&gt;cable &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;is called &lt;/del&gt;qualified only if it also passes the electrical tests &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;of the standard, and &lt;/del&gt;qualified cables are typically thermoset.&amp;lt;ref name=&quot;IqbalSalley-7-5&quot;&amp;gt;Iqbal and Salley (2004), p. 7-5.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;IqbalSalley-A-13&quot;&amp;gt;Iqbal and Salley (2004), p. A-13.&amp;lt;/ref&amp;gt; NFPA 850 recommends cable that passes the IEEE 383 flame test for generating plants, but even such cable burns under certain circumstances.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; Parallel panel tests with 4.88 m high panels gave the technical basis of the FM Global cable standard FM 3972.&amp;lt;ref name=&quot;Madrzykowski-2-44&quot;&amp;gt;Madrzykowski and Stroup (2008), p. 2-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In US nuclear plants the reference is IEEE 383, whose flame test applies a 21 kW burner for 20 minutes to cables on a rack 2.4 m high.&amp;lt;ref name=&quot;Nowlen-R-1&quot;&amp;gt;Nowlen et al. (2005b), p. R-1.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;NUREG-1805 calls a &lt;/ins&gt;cable &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&#039;&#039;&lt;/ins&gt;qualified&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&#039;&#039; &lt;/ins&gt;only if it also passes the &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;standard&#039;s loss-of-coolant &lt;/ins&gt;electrical tests&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;; &lt;/ins&gt;qualified cables are typically thermoset.&amp;lt;ref name=&quot;IqbalSalley-7-5&quot;&amp;gt;Iqbal and Salley (2004), p. 7-5.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;IqbalSalley-A-13&quot;&amp;gt;Iqbal and Salley (2004), p. A-13.&amp;lt;/ref&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt; NUREG/CR-6850 uses &#039;&#039;qualified&#039;&#039; for cables that pass the IEEE 383 flame test.&amp;lt;ref name=&quot;Nowlen-R-1&quot; /&lt;/ins&gt;&amp;gt; NFPA 850 recommends cable that passes the IEEE 383 flame test for generating plants, but even such cable burns under certain circumstances.&amp;lt;ref name=&quot;Sheridan-9-187&quot; /&amp;gt; Parallel panel tests with 4.88 m high panels gave the technical basis of the FM Global cable standard FM 3972.&amp;lt;ref name=&quot;Madrzykowski-2-44&quot;&amp;gt;Madrzykowski and Stroup (2008), p. 2-44.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Tewarson&amp;#039;s fire propagation index (FPI), measured in an oxygen-enriched apparatus, sorts cables into groups.&amp;lt;ref name=&amp;quot;Tewarson-3-92&amp;quot;&amp;gt;Tewarson (2002), p. 3-92.&amp;lt;/ref&amp;gt; Group 1 cables do not propagate fire beyond the ignition zone or do so in a decelerating way, while Group 3 cables propagate rapidly and need fire protection.&amp;lt;ref name=&amp;quot;Tewarson-3-92&amp;quot; /&amp;gt; In a worked example, a PE/PVC cable had an FPI of 29 (Group 3) and a cross-linked polyolefin cable an FPI of 4 (Group 1).&amp;lt;ref name=&amp;quot;Tewarson-3-93&amp;quot;&amp;gt;Tewarson (2002), p. 3-93.&amp;lt;/ref&amp;gt; Only the cable spreading room area with PE/PVC cables therefore needed fixed fire protection.&amp;lt;ref name=&amp;quot;Tewarson-3-94&amp;quot;&amp;gt;Tewarson (2002), p. 3-94.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Tewarson&amp;#039;s fire propagation index (FPI), measured in an oxygen-enriched apparatus, sorts cables into groups.&amp;lt;ref name=&amp;quot;Tewarson-3-92&amp;quot;&amp;gt;Tewarson (2002), p. 3-92.&amp;lt;/ref&amp;gt; Group 1 cables do not propagate fire beyond the ignition zone or do so in a decelerating way, while Group 3 cables propagate rapidly and need fire protection.&amp;lt;ref name=&amp;quot;Tewarson-3-92&amp;quot; /&amp;gt; In a worked example, a PE/PVC cable had an FPI of 29 (Group 3) and a cross-linked polyolefin cable an FPI of 4 (Group 1).&amp;lt;ref name=&amp;quot;Tewarson-3-93&amp;quot;&amp;gt;Tewarson (2002), p. 3-93.&amp;lt;/ref&amp;gt; Only the cable spreading room area with PE/PVC cables therefore needed fixed fire protection.&amp;lt;ref name=&amp;quot;Tewarson-3-94&amp;quot;&amp;gt;Tewarson (2002), p. 3-94.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l151&quot;&gt;Line 151:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 151:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Water is effective on cable fires. Fixed [[Water spray fixed system|water spray]] for exposure protection of cable trays uses 4.1 to 12.2 L/min/m² (0.1 to 0.3 gpm/ft²) of exposed surface.&amp;lt;ref name=&amp;quot;Bell-16-183&amp;quot;&amp;gt;Bell (2008), p. 16-183.&amp;lt;/ref&amp;gt; For motor control centre rooms, the handbook lists preaction sprinklers or water spray over exposed cables, detection and a total flooding gaseous system.&amp;lt;ref name=&amp;quot;Milatovich-8-159&amp;quot; /&amp;gt; The handbook recommends a fire risk evaluation to decide whether areas with much grouped cable need sprinklers.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Water is effective on cable fires. Fixed [[Water spray fixed system|water spray]] for exposure protection of cable trays uses 4.1 to 12.2 L/min/m² (0.1 to 0.3 gpm/ft²) of exposed surface.&amp;lt;ref name=&amp;quot;Bell-16-183&amp;quot;&amp;gt;Bell (2008), p. 16-183.&amp;lt;/ref&amp;gt; For motor control centre rooms, the handbook lists preaction sprinklers or water spray over exposed cables, detection and a total flooding gaseous system.&amp;lt;ref name=&amp;quot;Milatovich-8-159&amp;quot; /&amp;gt; The handbook recommends a fire risk evaluation to decide whether areas with much grouped cable need sprinklers.&amp;lt;ref name=&amp;quot;Sheridan-9-187&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In Sandia tests, Halon 1301 suppressed surface flames on cable trays quickly but took much longer on deep-seated fires.&amp;lt;ref name=&quot;IqbalSalley-B-43&quot;&amp;gt;Iqbal and Salley (2004), p. B-43.&amp;lt;/ref&amp;gt; A concentration of 6% with a 10-minute soak extinguished unqualified cables, while qualified cables needed 15 minutes.&amp;lt;ref name=&quot;IqbalSalley-B-44&quot;&amp;gt;Iqbal and Salley (2004), p. B-44.&amp;lt;/ref&amp;gt; In one test the bundle kept heating after discharge and reignited when air returned.&amp;lt;ref name=&quot;IqbalSalley-B-43&quot; /&amp;gt; The handbook reports no systematic evaluation of [[Halocarbon clean agent|clean agents]] on grouped cables.&amp;lt;ref name=&quot;DiNenno-17-112&quot;&amp;gt;DiNenno and Taylor (2008), p. 17-112.&amp;lt;/ref&amp;gt; The ISO clean agent standard &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;therefore &lt;/del&gt;requires 95% of the heptane extinguishing concentration &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;for &lt;/del&gt;bundles over 100 mm across, trays more than 20% full &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;or tray &lt;/del&gt;stacks closer than 250 mm.&amp;lt;ref name=&quot;DiNenno-17-112&quot; /&amp;gt; Energised cables remain a Class C fuel with a continuing energy input, which makes rekindling more likely.&amp;lt;ref name=&quot;Harrington-17-125&quot;&amp;gt;Harrington (2008), p. 17-125.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;In Sandia tests, Halon 1301 suppressed surface flames on cable trays quickly but took much longer on deep-seated fires.&amp;lt;ref name=&quot;IqbalSalley-B-43&quot;&amp;gt;Iqbal and Salley (2004), p. B-43.&amp;lt;/ref&amp;gt; A concentration of 6% with a 10-minute soak extinguished unqualified cables, while qualified cables needed 15 minutes.&amp;lt;ref name=&quot;IqbalSalley-B-44&quot;&amp;gt;Iqbal and Salley (2004), p. B-44.&amp;lt;/ref&amp;gt; In one test the bundle kept heating after discharge and reignited when air returned.&amp;lt;ref name=&quot;IqbalSalley-B-43&quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt; &lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;The handbook reports no systematic evaluation of [[Halocarbon clean agent|clean agents]] on grouped cables.&amp;lt;ref name=&quot;DiNenno-17-112&quot;&amp;gt;DiNenno and Taylor (2008), p. 17-112.&amp;lt;/ref&amp;gt; The ISO clean agent standard requires &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;at least &lt;/ins&gt;95% of the heptane extinguishing concentration &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;in four cases. These include &lt;/ins&gt;bundles over 100 mm across, trays more than 20% full&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;, &lt;/ins&gt;stacks closer than 250 mm &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;or energised equipment consuming over 5 kW&lt;/ins&gt;.&amp;lt;ref name=&quot;DiNenno-17-112&quot; /&amp;gt; Energised cables remain a Class C fuel with a continuing energy input, which makes rekindling more likely.&amp;lt;ref name=&quot;Harrington-17-125&quot;&amp;gt;Harrington (2008), p. 17-125.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Limits and uncertainty ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Limits and uncertainty ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3174:rev-4249:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=3174&amp;oldid=prev</id>
		<title>Mark: FSE wiki: added handbook citations (Custer 2008; Gann and Bryner 2008; Benedetti and Colonna 2008) on thermoplastic and thermoset fire behaviour (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=3174&amp;oldid=prev"/>
		<updated>2026-11-07T21:12:14Z</updated>

		<summary type="html">&lt;p&gt;FSE wiki: added handbook citations (Custer 2008; Gann and Bryner 2008; Benedetti and Colonna 2008) on thermoplastic and thermoset fire behaviour (written by Claude Opus 5.5)&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 22:12, 7 November 2026&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l4&quot;&gt;Line 4:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 4:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;An electrical cable carries power, control signals or instrument signals while keeping each conductor electrically isolated.&amp;lt;ref name=&amp;quot;IqbalSalley-A-1&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-1.&amp;lt;/ref&amp;gt; It consists of copper or aluminium conductors, each wrapped in insulation, with fillers, shields and an outer jacket.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot;&amp;gt;Iqbal and Salley (2004), p. A-2.&amp;lt;/ref&amp;gt; The insulation provides the electrical function, while the jacket gives physical protection and sometimes extra flame retardancy.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; A flame-retardant jacket slows flame spread, but it does not ensure that the circuit keeps working.&amp;lt;ref name=&amp;quot;IqbalSalley-A-2&amp;quot; /&amp;gt; Because insulation and jackets are organic polymers, they burn under most fire conditions and release heat and toxic gases.&amp;lt;ref name=&amp;quot;IqbalSalley-7-2&amp;quot; /&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&quot;IqbalSalley-A-7&quot;&amp;gt;Iqbal and Salley (2004), p. A-7.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&quot;IqbalSalley-A-2&quot; /&amp;gt;&amp;lt;ref name=&quot;IqbalSalley-A-8&quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Thermoset insulation typically fails at about 350 °C or higher&lt;/del&gt;, while &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;thermoplastic insulation often fails well below 218 °C&lt;/del&gt;.&amp;lt;ref name=&quot;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;IqbalSalley&lt;/del&gt;-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;A&lt;/del&gt;-2&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&quot; &lt;/del&gt;/&amp;gt; &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Rubber or plastic jacketing on grouped cables has provided the fuel for fires in the electrical and communications industries.&lt;/del&gt;&amp;lt;ref name=&quot;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Benedetti&lt;/del&gt;-6-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;226&lt;/del&gt;&quot;&amp;gt;&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Benedetti &lt;/del&gt;and &lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Colonna &lt;/del&gt;(2008), p. 6-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;226&lt;/del&gt;.&amp;lt;/ref&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;Cable materials fall into two broad classes. Thermoplastic materials such as polyethylene (PE) and [[Polyvinyl chloride|polyvinyl chloride]] (PVC) are not cross-linked; they melt when heated, and some produce dripping, flaming fires.&amp;lt;ref name=&quot;IqbalSalley-A-7&quot;&amp;gt;Iqbal and Salley (2004), p. A-7&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;.&amp;lt;/ref&amp;gt;&amp;lt;ref name=&quot;Benedetti-6-210&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-210&lt;/ins&gt;.&amp;lt;/ref&amp;gt; Thermoset materials such as cross-linked polyethylene (XLPE, also written XPE), ethylene propylene rubber and neoprene do not melt; they char, smoulder and burn in place.&amp;lt;ref name=&quot;IqbalSalley-A-2&quot; /&amp;gt;&amp;lt;ref name=&quot;IqbalSalley-A-8&quot;&amp;gt;Iqbal and Salley (2004), p. A-8.&amp;lt;/ref&amp;gt; &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;A melting thermoplastic can form a burning pool that releases energy quickly&lt;/ins&gt;, while &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;thermosets tend to char and burn more slowly&lt;/ins&gt;.&amp;lt;ref name=&quot;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Custer&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;2&lt;/ins&gt;-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;50&quot;&amp;gt;Custer (2008), p. &lt;/ins&gt;2&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;-50.&amp;lt;&lt;/ins&gt;/&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;ref&lt;/ins&gt;&amp;gt;&amp;lt;ref name=&quot;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Gann&lt;/ins&gt;-6-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;12&lt;/ins&gt;&quot;&amp;gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Gann &lt;/ins&gt;and &lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Bryner &lt;/ins&gt;(2008), p. 6-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;12&lt;/ins&gt;.&amp;lt;/ref&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;&amp;gt; Thermoset insulation typically fails at about 350 °C or higher, while thermoplastic insulation often fails well below 218 °C.&amp;lt;ref name=&quot;IqbalSalley-A-2&quot; /&lt;/ins&gt;&amp;gt; The wider behaviour of these polymers is treated under [[Plastics in fire]] and [[Thermoplastics and thermosets]].&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;A 1966 NFPA study of 24 fires in US power plants was probably the first to show that grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt; Tray tests have revealed several burn modes, from uniform flaming over the bundle to melting into a burning mass and deep-seated combustion in charring cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; In the deep-seated mode, flames appear in sporadic bursts and a glowing region creeps slowly along the cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; Such a fire can recede when smoke starves it of oxygen and reignite when fresh air arrives.&amp;lt;ref name=&quot;IqbalSalley-B-40&quot;&amp;gt;Iqbal and Salley (2004), p. B-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;Rubber or plastic jacketing on grouped cables has provided the fuel for fires in the electrical and communications industries.&amp;lt;ref name=&quot;Benedetti-6-226&quot;&amp;gt;Benedetti and Colonna (2008), p. 6-226.&amp;lt;/ref&amp;gt; &lt;/ins&gt;A 1966 NFPA study of 24 fires in US power plants was probably the first to show that grouped cables spread flame much faster than single cables.&amp;lt;ref name=&quot;IqbalSalley-7-1&quot; /&amp;gt; Tray tests have revealed several burn modes, from uniform flaming over the bundle to melting into a burning mass and deep-seated combustion in charring cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; In the deep-seated mode, flames appear in sporadic bursts and a glowing region creeps slowly along the cables.&amp;lt;ref name=&quot;IqbalSalley-7-3&quot; /&amp;gt; Such a fire can recede when smoke starves it of oxygen and reignite when fresh air arrives.&amp;lt;ref name=&quot;IqbalSalley-B-40&quot;&amp;gt;Iqbal and Salley (2004), p. B-40.&amp;lt;/ref&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Ignition sources and frequency ==&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;== Ignition sources and frequency ==&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l176&quot;&gt;Line 176:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 176:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Benedetti, R. P., &amp;amp; Colonna, G. R. (2008). Polymeric materials. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 6-209–6-231). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Budnick, E. K., Hunt, S. P., &amp;amp; Wright, M. T. (2008). Closed form enclosure fire calculations. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 3-145–3-166). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Budnick, E. K., Hunt, S. P., &amp;amp; Wright, M. T. (2008). Closed form enclosure fire calculations. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 3-145–3-166). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-side-deleted&quot;&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;* Custer, R. L. P. (2008). Dynamics of compartment fire growth. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &#039;&#039;Fire protection handbook&#039;&#039; (20th ed., pp. 2-49–2-58). National Fire Protection Association.&lt;/ins&gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Custer, R. L. P., &amp;amp; Milke, J. A. (2008). Fundamentals of fire detection. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-75–2-78). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Custer, R. L. P., &amp;amp; Milke, J. A. (2008). Fundamentals of fire detection. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 2-75–2-78). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Davoodi, H. (2008). Confinement of fire in buildings. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 18-3–18-21). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;* Davoodi, H. (2008). Confinement of fire in buildings. In A. E. Cote, C. C. Grant, J. R. Hall Jr., &amp;amp; R. E. Solomon (Eds.), &amp;#039;&amp;#039;Fire protection handbook&amp;#039;&amp;#039; (20th ed., pp. 18-3–18-21). National Fire Protection Association.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;

&lt;!-- diff cache key firesb_pjbsiy42-wiki_:diff:1.41:old-3139:rev-3174:php=table --&gt;
&lt;/table&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
	<entry>
		<id>https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=3139&amp;oldid=prev</id>
		<title>Mark: New FSE wiki article: Cable fire (written by Claude Opus 5.5)</title>
		<link rel="alternate" type="text/html" href="https://fire-safety.academy/w/index.php?title=Cable_fire&amp;diff=3139&amp;oldid=prev"/>
		<updated>2026-11-07T21:10:40Z</updated>

		<summary type="html">&lt;p&gt;New FSE wiki article: Cable fire (written by Claude Opus 5.5)&lt;/p&gt;
&lt;a href=&quot;https://fire-safety.academy/w/index.php?title=Cable_fire&amp;amp;diff=3139&quot;&gt;Show changes&lt;/a&gt;</summary>
		<author><name>Mark</name></author>
	</entry>
</feed>